-- MIB file created 17-Mar-2005 13:04:53, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco

CISCO-IVR-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-IVR-MIB.my"
-- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T"

IMPORTS
    RowStatus, TruthValue, TimeStamp
            FROM SNMPv2-TC-v1
    ciscoMgmt
            FROM CISCO-SMI
    SnmpAdminString
            FROM SNMP-FRAMEWORK-MIB
    vsanIndex
            FROM CISCO-VSAN-MIB
    FcList, ZoneQosPriorityLevel
            FROM CISCO-ZS-MIB
    VsanIndex, FcNameId, DomainId, FcAddressId
            FROM CISCO-ST-TC
    Gauge
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212
    TRAP-TYPE
            FROM RFC-1215;

ciscoIvrMIB OBJECT IDENTIFIER ::= { ciscoMgmt 371 }
-- MODULE-IDENTITY
--  LastUpdated
--    200503030000Z
--  OrgName
--    Cisco Systems Inc.
--  ContactInfo
--         Cisco Systems
--          Customer Service
--    Postal: 170 W Tasman Drive
--          San Jose, CA  95134
--          USA
--    Tel: +1 800 553 -NETS
--    E-mail: cs-san@cisco.com
--  Descr
--    The MIB module for the management of Inter-VSAN
--     routing within the framework of Cisco's 
--     Inter-VSAN Routing (IVR) Architecture. IVR allows
--     traffic between VSANs. VSANs are logically separated
--     Storage Area Networks (SANs) where traffic does not 
--     cross VSAN boundaries. Certain SAN applications need
--     restricted communication between initiators and 
--     targets which are in different VSANs. This MIB enables
--     the users to manage IVR.
--    
--     The VSANs logically separate a single physical fabric 
--     into multiple logical fabrics. Each of these physical 
--     fabrics are called Autonmous Fabrics. In addition to 
--     Inter-VSAN communication, IVR also enables 
--     communication between Autonomous Fabrics.
--    
--     Acronyms
--     The following acronyms are used in this document:
--    
--     Lun:     Logical Unit Number
--    
--     IV:      Inter-VSAN
--    
--     IVR:     Inter-VSAN Routing
--    
--     PWWN:    Port World Wide Name
--    
--     AFID:    Autonomous Fabric id
--  RevDate
--    200503030000Z
--  RevDescr
--    To support IVR-2 protocol,
--     1.added new objects
--      civrFcidNatMode, civrVsanTopologyAutoDisc and
--      civrTopologyIvrSrvGrpNextIndex.
--     2.added new objects to civrZoneMemberTable,
--      civrZoneEnforcedZoneMemberTable,
--      civrZoneTable and civrZoneEnforcedZoneTable.
--     3.added new tables, civrTopologyAfidConfTable,
--      civrTopologyDefaultAfidTable,
--      and civrTopologyIvrSrvGrpTable.
--     4.added new compliances.
--    Added new values to eumeration provided by the 
--    civrZoneSetActvatDeactvatResult object.
--  RevDate
--    200410270000Z
--  RevDescr
--    Added new objects civrAddIvrVirtualDomainsVsans2k and
--    civrAddIvrVirtualDomainsVsans4k.
--    Added new compliance civrZoneServerMIBComplianceRev1.
--  RevDate
--    200311030000Z
--  RevDescr
--    Obtained new OID. Removed civEnabled object.
--    Added notification civrDomainConflictNotify.
--    Added objects civDomainIdConflictVsan, 
--    civrZoneMemberFabricId, 
--    civrZoneSetActDeactPartialSucss to be sent with 
--    notifications.
--    Added few more enumerations to ivrZonesetStatus
--    and civrZoneSetActvatDeactvatResult.
--  RevDate
--    200310200000Z
--  RevDescr
--    Initial version of this MIB.

ciscoIvrMIBNotifications OBJECT IDENTIFIER ::= { ciscoIvrMIB 0 }
ciscoIvrMIBObjects OBJECT IDENTIFIER ::= { ciscoIvrMIB 1 }
ciscoIvrMIBConformance OBJECT IDENTIFIER ::= { ciscoIvrMIB 2 }
cimIvrConfiguration OBJECT IDENTIFIER ::= { ciscoIvrMIBObjects 1 }
cimIvrStats     OBJECT IDENTIFIER ::= { ciscoIvrMIBObjects 2 }
cimIvrGeneric   OBJECT IDENTIFIER ::= { cimIvrConfiguration 1 }
cimIvrZoneset   OBJECT IDENTIFIER ::= { cimIvrConfiguration 2 }
cimIvrZone      OBJECT IDENTIFIER ::= { cimIvrConfiguration 3 }
cimIvrZoneMember OBJECT IDENTIFIER ::= { cimIvrConfiguration 4 }
cimIvrTopology  OBJECT IDENTIFIER ::= { cimIvrConfiguration 5 }
cimIvrVirtualDomains OBJECT IDENTIFIER ::= { cimIvrConfiguration 6 }
civrZoneServerMIBCompliances OBJECT IDENTIFIER ::= { ciscoIvrMIBConformance 1 }
civrZoneServerMIBGroups OBJECT IDENTIFIER ::= { ciscoIvrMIBConformance 2 }

CIvrZoneMemberType ::= INTEGER {
        pwwnVsan(1)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Type of IV zone member.
--     pwwnVsan -  the member is identified by port WWN
--                 (World Wide Name) and VSAN.

CIvrAutonomousFabricId ::= Gauge(1..65535)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The Autonomous Fabric identifier. This identifies a set
--     of fibre channel devices like hosts, disks, switches
--     which are under single administration. It is up to the 
--     administrator to assign these identifiers to the 
--     Autonomous Fabrics so that each of the physical 
--     fabrics are uniquely identified. If a fabric is not 
--     partitioned into Autonomous Fabrics, then value of 1 
--     must be used.

CIvrChecksum ::= OCTET STRING(SIZE(1..255))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    The checksum computed from the object/group of objects 
--     specified in the object description.
--     This is used by manager to check if the object or
--     group of objects is same across devices in the fabric.
--     Note that method use to compute this is implementation
--     specific.

civrFcidNatMode OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Enable FCID and VSAN identifier translation
         cross VSAN boundaries. If the value is 'true', the
         VSAN identifier as well as the entire FCID of the
         end-devices would be modified as frames cross
         VSAN boundaries."
    ::= { cimIvrGeneric 1 }

civrVsanTopologyAutoDisc OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Enable automatic VSAN topology discovery.
         If this value is 'true', automatic VSAN topology
         discovery is turned on.  IVR processes would
         communicate with each other to provide a global
         view of the physical topology to all the IVR
         enabled switches.  VSAN topology is configured
         through civrTopologyAfidConfTable and
         civrTopologyDefaultAfidTable when automatic VSAN
         topology discovery is turned on.
        
         If this value is 'false', automatic VSAN topology
         discovery is turned off.  VSAN topology is
         manually configured by using civrTopologyConfigTable."
    ::= { cimIvrGeneric 2 }

civrZoneSetNumber OBJECT-TYPE
    SYNTAX INTEGER(0..8388608)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of entries currently present in the
         civrZoneSetTable."
    ::= { cimIvrZoneset 1 }

civrZoneSetTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CivrZoneSetEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table containing information on each Inter-VSAN (IV) 
        zonesets which are configured locally. It comprises the
        zonesets in the full IV zone database.
        There could be multiple IV zonesets configured. But 
        only one zoneset is allowed to be active at a time. 
        An IV zoneset is a collection of IV zones."
    ::= { cimIvrZoneset 2 }

civrZoneSetEntry OBJECT-TYPE
    SYNTAX CivrZoneSetEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the civrZoneSetTable. 
        
         The sequence of operations to be performed in order
         to create a zoneset is as follows:
        
         - create zone entries in the civrZoneTable. 
        
         - create an entry in this table and set the 
           civrZoneSetZoneList bitmap object to contain the 
           required IV zones. 
        
         - Note that it is perfectly valid to create an
           empty zoneset."
    INDEX { civrZoneSetIndex }
    ::= { civrZoneSetTable 1 }

CivrZoneSetEntry ::= SEQUENCE {
    civrZoneSetIndex Gauge,
    civrZoneSetName SnmpAdminString,
    civrZoneSetZoneList FcList,
    civrZoneSetLastChange TimeStamp,
    civrZoneSetChecksum CIvrChecksum,
    civrZoneSetRowStatus RowStatus
    }

civrZoneSetIndex OBJECT-TYPE
    SYNTAX Gauge(1..2048)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The index of a zoneset. This object uniquely 
         identifies an IV zoneset.  This object could
         have the same value as civrZoneSetTableNextIndex."
    ::= { civrZoneSetEntry 1 }

civrZoneSetName OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(1..64))
--    Rsyntax OCTET STRING(SIZE(1..64))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The name of this zoneset. The civrZoneSetName
         should be unique on this device.
        
         This object cannot be modified while the
         corresponding value of civrZoneSetRowStatus
         is equal to 'active'.
        
         This object MUST be set before or concurrently
         with setting the corresponding instance of
         civrZoneSetRowStatus to 'active'."
    ::= { civrZoneSetEntry 2 }

civrZoneSetZoneList OBJECT-TYPE
    SYNTAX FcList
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The set of IV zones which form this zoneset. The 
        IV zones are identified by civrZoneIndex object in the 
        civrZoneTable.
        
        If a particular bit has a value of '1', then the 
        corresponding zone is a part of this zoneset. All other
        zones have '0' in their positions or not present in the 
        string.
        
        Note that an IV zone can be part of multiple IV 
        zonesets."
    DEFVAL { ''H }
    ::= { civrZoneSetEntry 3 }

civrZoneSetLastChange OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of sysUpTime at the time of the last
         change to this IV zoneset entry. If the entry has
         not been modified since the last re-initialization
         of the local network management system, then this
         object will contain a zero value."
    ::= { civrZoneSetEntry 4 }

civrZoneSetChecksum OBJECT-TYPE
    SYNTAX CIvrChecksum
--    Rsyntax OCTET STRING(SIZE(1..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The checksum of content of this zoneset."
    ::= { civrZoneSetEntry 5 }

civrZoneSetRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this conceptual row.
        
         This object can not be set to 'active' unless 
         the corresponding value of civrZoneSetName is 
         unique."
    ::= { civrZoneSetEntry 6 }

civrZoneSetActivate OBJECT-TYPE
    SYNTAX Gauge(0..2048)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Setting this object to a value is a request for a 
         particular IV zoneset to be activated on this device.
         i.e., for the current configuration of that zoneset
         to be cloned with the clone becoming the
         active zoneset.
        
         Setting this object to a value (say, N) identifies
         the IV zoneset to be cloned as the zoneset 
         identified by civrZoneSetIndex object having the same
         value N.
        
         Even though there could be multiple IV zonesets on 
         this device, only one can be active at a time. If a 
         IV zoneset is already active and a second IV zone
         set is activated, then the first IV zoneset is 
         automatically deactivated and the second IV zoneset 
         is activated.
        
         The IV zoneset activation is done only in 
         'activate VSANs' on the local device. The 
         'activate VSANs' is the intersection of topology VSANs
         on the local device (civrTopologyActiveSwitchVsan2k and
         civrTopologyActiveSwitchVsan4k), members VSANs (union 
         of all the VSANs of the members in the zoneset being
         activated) and local VSANs (vsanTable from 
         CISCO-VSAN-MIB).
        
         If the activation was successful then,
         civrZoneEnforcedZoneSetName contains the name of 
         zoneset corresponding to the civrZoneSetIndex that was 
         set.
        
         The value of this object when read is always 0."
    ::= { cimIvrZoneset 3 }

civrZoneSetActvatDeactvatResult OBJECT-TYPE
    SYNTAX INTEGER {
        activateSuccess(1),
        activateFailureNoMembers(2),
        activateFailureZoneOneorLessMem(3),
        activateFailureNoTopology(4),
        activateFailureNoPerVsanSucc(5),
        activateFailureNoZoneset(6),
        activateFailureNoVsans(7),
        activateFailureFabricUnstable(8),
        deactivateSuccess(9),
        deactivateFailureNoActiveZs(10),
        deactivateFailureNoPerVsanSucc(11),
        deactivateFailureFabricUnstable(12),
        activating(13),
        deactivating(14),
        idle(15),
        deactivateSuccessFcNatShutup13(16),
        activateFailureFabric(17),
        deactivateFailureFabric(18),
        activatePartialSuccessFabric(19),
        deactivatePartialSuccessFabric(20),
        deviceCleanupInProgress(21),
        activatingReadyToAdv(22),
        activatingAdvertising(23)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object indicates the outcome of the most
         recent activation/deactivation.
        
         activateSuccess                 - activation success
         activateFailureNoMembers        - activation failure 
                                           because of no members
                                           in the zoneset
         activateFailureZoneOneorLessMem - activation failure as
                                           the zoneset being 
                                           activated contained 
                                           one or less member. 
         activateFailureNoTopology       - activation failure
                                           because of no IVR
                                           topology
         activateFailureNoPerVsanSucc    - activation failed in
                                           all 'activate VSANs'
         activateFailureNoZoneset        - activation failure
                                           because of no zoneset
         activateFailureNoVsans          - activation failure 
                                           because of no 
                                           'activate VSANs'
         activateFailureFabricUnstable   - activation failure 
                                           because fabric 
                                           unstable
         deactivateSuccess               - deactivation success
         deactivateFailureNoActiveZs     - no active zoneseset
         deactivateFailureNoPerVsanSucc  - deactivation failed 
                                           in all
                                           'activate VSANs'
         deactivateFailureFabricUnstable - deactivation failed 
                                           because fabric is 
                                           unstable
         activating                      - activation in 
                                           progress
         deactivating                    - deactivation in 
                                           progress
         idle                            - idle
         deactivateSuccessFcNatShutup13 -  deactivation success,
                                           shutup 1.3 switch
                                           in NAT mode
         activateFailureFabric           - none of the switches
                                           connected to the
                                           fabric is able to
                                           activate this zoneset
         deactivateFailureFabric         - none of the switches
                                           connected to the
                                           fabric is able to
                                           deactivate this
                                           zoneset
         activatePartialSuccessFabric    - activation succeeds
                                           on some of the
                                           switches connected to
                                           this fabric
         deactivatePartialSuccessFabric  - deactivation succeeds
                                           on some of the
                                           switches connected to
                                           this fabric
         deviceCleanupInProgress         - device cleanup is
                                           in progress during
                                           deactivation
         activatingReadyToAdv            - switches connected
                                           to this fabric are
                                           ready to advertise
                                           device changes
         activatingAdvertising           - switches connected
                                           to this fabric are
                                           advertising device
                                           change information
        
         When the value of this object is either 'activating',
         or 'deactivating', the values of of 
         civrZoneSetActivate and civrZoneSetDeActivate 
         respectively cannot be modified."
    ::= { cimIvrZoneset 4 }

civrZoneSetDeActivate OBJECT-TYPE
    SYNTAX INTEGER {
        deactivate(1),
        noop(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Setting this object to 'deactivate' is a request
         to deactivate the currently active IV zoneset.
        
         deactivate -  deactivate IV zoneset
         noop       - no operation
        
         No action is taken if this object is set to
         'noop'.
        
         The value of this object when read is always 
         'noop'."
    ::= { cimIvrZoneset 5 }

civrZonesetDbChecksum OBJECT-TYPE
    SYNTAX CIvrChecksum
--    Rsyntax OCTET STRING(SIZE(1..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The checksum of the full IV zone database."
    ::= { cimIvrZoneset 6 }

civrActiveZonesetChecksum OBJECT-TYPE
    SYNTAX CIvrChecksum
--    Rsyntax OCTET STRING(SIZE(1..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The checksum of the enforced (active) IV zoneset."
    ::= { cimIvrZoneset 7 }

civrZoneNumber OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of entries currently present in the
         civrZoneTable."
    ::= { cimIvrZone 1 }

civrZoneTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CivrZoneEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table gives information on all the IV zones and 
        lists all their members. IV zones is group of IV members
        (FC devices like hosts, disks) in different VSANs."
    ::= { cimIvrZone 2 }

civrZoneEntry OBJECT-TYPE
    SYNTAX CivrZoneEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the civrZoneTable.
         These are the zones in the full IV zone database.
         The sequence of operations to be performed in 
         order to create a IV Zone is as follows:
        
         - create an entry in this table.
        
         - create IV zone members in the civrZoneMemberTable
           that belong to this IV zone."
    INDEX { civrZoneIndex }
    ::= { civrZoneTable 1 }

CivrZoneEntry ::= SEQUENCE {
    civrZoneIndex Gauge,
    civrZoneName SnmpAdminString,
    civrZoneMemberList FcList,
    civrZoneLastChange TimeStamp,
    civrZoneRowStatus RowStatus,
    civrZoneReadOnly TruthValue,
    civrZoneQosPriority ZoneQosPriorityLevel
    }

civrZoneIndex OBJECT-TYPE
    SYNTAX Gauge(1..2048)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The index of an IV Zone.
         This object could have the same value as
         civrZoneTableNextIndex."
    ::= { civrZoneEntry 1 }

civrZoneName OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(1..58))
--    Rsyntax OCTET STRING(SIZE(1..58))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The name of this zone. The zoneName should be
         unique this device.
        
         This object can not be modified while the
         corresponding value of civrZoneRowStatus is
         'active'.
        
         This object MUST be set before or concurrently
         with setting the corresponding instance of
         civrZoneRowStatus to 'active'."
    ::= { civrZoneEntry 2 }

civrZoneMemberList OBJECT-TYPE
    SYNTAX FcList
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The set of IV Zone members that form this IV zone. 
        
         The IV zone members are identified by 
         civrZoneMemberIndex object in the civrZoneMemberTable.
        
         If a particular bit has a value of '1', then the 
         corresponding zone member is a part of this zone.
         All other zone members have '0' in their 
         positions or not present in the string.
        
         This object is read-only; changes to its value
         are made by the agent as and when associated
         entries are created/deleted in the 
         civrZoneMemberTable.
        
         The default value is the zero length string."
    DEFVAL { ''H }
    ::= { civrZoneEntry 3 }

civrZoneLastChange OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of sysUpTime at the time of the last
         change to this IV zone entry. If the entry has not 
         been modified since the last re-initialization
         of the local network management system, then this
         object will contain a zero value."
    ::= { civrZoneEntry 5 }

civrZoneRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this conceptual row.
        
         This object can not be set to 'active'
         unless the corresponding value of zoneName
         is unique on this device."
    ::= { civrZoneEntry 6 }

civrZoneReadOnly OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object indicates if only SCSI read
         operations are allowed on members of this
         IV zone which are SCSI targets.
        
         If this object is set to 'true', then only
         SCSI read operations are permitted. So, this
         IV zone becomes a read-only IV zone.
        
         If this object is set to 'false', then both
         SCSI read and write operations are permitted
         in this IV zone."
    ::= { civrZoneEntry 7 }

civrZoneQosPriority OBJECT-TYPE
    SYNTAX ZoneQosPriorityLevel
--    Rsyntax INTEGER {
--        none(1),
--        low(2),
--        medium(3),
--        high(4)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies if qos attribute for this
         IV zone is enabled. If this object is set to a
         value other than 'none', then qos attribute for this
         IV zone is enabled.  If this object is set to 'none',
         then qos attribute for this IV zone is disabled.
        
         If this attribute is enabled for this IV zone,
         then only traffic with the configured priority
         level will be allowed between the members of
         this IV zone."
    ::= { civrZoneEntry 8 }

civrZoneMemberNumber OBJECT-TYPE
    SYNTAX INTEGER(0..16777216)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of entries currently present in the
         civrZoneMemberTable."
    ::= { cimIvrZoneMember 1 }

civrZoneMemberTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CivrZoneMemberEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains all members of all the IV Zones
         in the civrZoneTable and information about those 
         members. These are the members part of full IV zone 
         database."
    ::= { cimIvrZoneMember 2 }

civrZoneMemberEntry OBJECT-TYPE
    SYNTAX CivrZoneMemberEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the civrZoneMemberTable.
         Each entry represents the relationship between
        a member and (one of) its 'parent(s)', i.e., an
         IV zone to which the member belongs to."
    INDEX { civrZoneMemberParentIndex, civrZoneMemberIndex }
    ::= { civrZoneMemberTable 1 }

CivrZoneMemberEntry ::= SEQUENCE {
    civrZoneMemberParentIndex Gauge,
    civrZoneMemberIndex Gauge,
    civrZoneMemberType CIvrZoneMemberType,
    civrZoneMemberID OCTET STRING,
    civrZoneMemberAFId CIvrAutonomousFabricId,
    civrZoneMemberVsan VsanIndex,
    civrZoneMemberRowStatus RowStatus,
    civrZoneMemberLunID OCTET STRING
    }

civrZoneMemberParentIndex OBJECT-TYPE
    SYNTAX Gauge(1..2048)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This object contains the value of the index of
         the IV zone to which this member belongs to."
    ::= { civrZoneMemberEntry 1 }

civrZoneMemberIndex OBJECT-TYPE
    SYNTAX Gauge(1..2048)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The index of this IV zone member on this
         IV zone."
    ::= { civrZoneMemberEntry 2 }

civrZoneMemberType OBJECT-TYPE
    SYNTAX CIvrZoneMemberType
--    Rsyntax INTEGER {
--        pwwnVsan(1)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The type of IV Zone member.
         This object cannot be modified while the 
         corresponding value of civrZoneMemberRowStatus object
         is 'active'."
    ::= { civrZoneMemberEntry 3 }

civrZoneMemberID OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object represents the IV zone member ID.
         If civrZoneMemberType is 'pwwnVsan', this object
         contains port WWN.
         This object cannot be modified while the 
         corresponding value of civrZoneMemberRowStatus object
         is 'active'."
    ::= { civrZoneMemberEntry 4 }

civrZoneMemberAFId OBJECT-TYPE
    SYNTAX CIvrAutonomousFabricId
--    Rsyntax Gauge(1..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The Autonomous Fabric identifier of this IV zone 
         member. This object cannot be modified while the 
         corresponding value of civrZoneMemberRowStatus object
         is 'active'."
    DEFVAL { 1 }
    ::= { civrZoneMemberEntry 5 }

civrZoneMemberVsan OBJECT-TYPE
    SYNTAX VsanIndex
--    Rsyntax INTEGER(1..4094)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The VSAN of this IV zone member.
         This object cannot be modified while the 
         corresponding value of civrZoneMemberRowStatus object
         is 'active'."
    ::= { civrZoneMemberEntry 6 }

civrZoneMemberRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this conceptual row.
        
         civrMemberType, civrZoneMemberID and civrZoneMemberVsan
         objects MUST be set before or concurrently with setting
         the corresponding instance of civrZoneMemberRowStatus
         to 'active'. "
    ::= { civrZoneMemberEntry 7 }

civrZoneMemberLunID OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(0|8))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the Lun ID if IV Lun
         zoning is configured.
        
         If this object is the zero-length string, then
         IV Lun zoning is not configured.
        
         This object cannot be modified while the
         corresponding value of zoneMemberRowStatus object
         is 'active'."
    DEFVAL { ''H }
    ::= { civrZoneMemberEntry 8 }

civrZoneEnforcedZoneSetName OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(1..64))
--    Rsyntax OCTET STRING(SIZE(1..64))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The name of the enforced IV zoneset."
    ::= { cimIvrZoneset 8 }

civrZoneEnforcedZoneSetZoneList OBJECT-TYPE
    SYNTAX FcList
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The set of IV zones which form this IV zoneset.
         This object was copied from the 
         civrZoneSetZoneList object in the civrZoneSetTable at
         the time when the currently active zoneset was
         activated."
    ::= { cimIvrZoneset 9 }

civrZoneEnforcedZoneSetActvtTime OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The sysUpTime at which enforced zoneset was
         most recently activated. If this entry has 
         been activated prior to the last 
         re-initialization of the local network 
         management system, then this object will 
         contain a zero value."
    ::= { cimIvrZoneset 10 }

civrZoneCopyZoneSetEnforcdToFull OBJECT-TYPE
    SYNTAX INTEGER {
        copy(1),
        noOp(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object copies the enforced IV zoneset
         (active IV zoneset) into the full IV zone database 
         Setting this object to 'copy' will trigger the copy 
         of the enforced IV zoneset to the full IV zone 
         database.
        
         If there is no enforced IV zoneset, the copy will 
         result in an error. 
        
         No action is taken if this object is set to 'noOp'."
    ::= { cimIvrZoneset 11 }

civrZoneClearFullZoneDb OBJECT-TYPE
    SYNTAX INTEGER {
        clear(1),
        noOp(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object clears the full IVR zone database.
         Setting this object to 'clear' will 
         clear the full IV zone database.
        
         No action is taken if this object is set to 'noOp'."
    ::= { cimIvrZoneset 12 }

civrZonesetActivateForce OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The force option for IV zoneset activation. Following
        things are done if this object is 'true':
        - If there is no regular active zoneset in a VSAN (no 
          entry present zoneEnforcedZoneSetTable from 
          CISCO-ZS-MIB for that VSAN), then a regular active 
          zoneset will be created and the IV zones will be added
          to the active zoneset.
        - if the default zone behaviour (as indicated by object
          zoneDefaultZoneBehaviour from CISCO-ZS-MIB) is 
          'permit', then the IV zones will be added to the 
          regular active zoneset.
        
        If the value of this object is 'false', the IV zones
        are added to the regular active zoneset only in the case
        of default zone behaviour is 'deny'."
    ::= { cimIvrZoneset 13 }

civrZoneSetTableNextIndex OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object specifies the next available index for
         object civrZoneSetIndex which can be used for
         creating an entry in civrZoneSetTable."
    ::= { cimIvrZoneset 14 }

civrZoneEnforcedZoneNumber OBJECT-TYPE
    SYNTAX INTEGER(0..8388608)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of entries currently present in the
         civrZoneEnforcedZoneTable."
    ::= { cimIvrZone 3 }

civrZoneEnforcedZoneTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CivrZoneEnforcedZoneEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains all the IV zones that are 
         present in the active IV zoneset."
    ::= { cimIvrZone 4 }

civrZoneEnforcedZoneEntry OBJECT-TYPE
    SYNTAX CivrZoneEnforcedZoneEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in this table."
    INDEX { civrZoneIndex }
    ::= { civrZoneEnforcedZoneTable 1 }

CivrZoneEnforcedZoneEntry ::= SEQUENCE {
    civrZoneEnforcedZoneName SnmpAdminString,
    civrZoneEnforcedZoneMemberList FcList,
    civrZoneEnforcedZoneReadOnly TruthValue,
    civrZoneEnforcedZoneQosPriority ZoneQosPriorityLevel
    }

civrZoneEnforcedZoneName OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(1..58))
--    Rsyntax OCTET STRING(SIZE(1..58))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The name of this zone."
    ::= { civrZoneEnforcedZoneEntry 1 }

civrZoneEnforcedZoneMemberList OBJECT-TYPE
    SYNTAX FcList
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The set of members that form this IV zone.
         This object was copied from the civrZoneMemberList
         object in the civrZoneTable at the time when the 
         currently active zoneset was activated."
    ::= { civrZoneEnforcedZoneEntry 2 }

civrZoneEnforcedZoneReadOnly OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object indicates whether this is a
         read-only IV zone. This object was copied from
         the civrZoneReadOnly object in the civrZoneTable at
         the time when the currently active zoneset
         was activated."
    ::= { civrZoneEnforcedZoneEntry 3 }

civrZoneEnforcedZoneQosPriority OBJECT-TYPE
    SYNTAX ZoneQosPriorityLevel
--    Rsyntax INTEGER {
--        none(1),
--        low(2),
--        medium(3),
--        high(4)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object indicates whether this is a
         qos enabled IV zone. This object was copied from
         the civrZoneQosPriority object in the civrZoneTable
         at the time when the currently active zoneset
         was activated."
    ::= { civrZoneEnforcedZoneEntry 4 }

civrZoneTableNextIndex OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object specifies the next available index for
         object civrZoneIndex which can be used for
         creating an entry in civrZoneTable."
    ::= { cimIvrZone 5 }

civrZoneEnforcedZoneMemberNumber OBJECT-TYPE
    SYNTAX INTEGER(0..16777216)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of entries currently present in the
         civrZoneEnforcedZoneMemberTable."
    ::= { cimIvrZoneMember 3 }

civrZoneEnforcedZoneMemberTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CivrZoneEnforcedZoneMemberEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains all members that are part 
         of a IV zone and are part of the active IV zone 
         set."
    ::= { cimIvrZoneMember 4 }

civrZoneEnforcedZoneMemberEntry OBJECT-TYPE
    SYNTAX CivrZoneEnforcedZoneMemberEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in this table."
    INDEX { civrZoneMemberParentIndex, civrZoneMemberIndex }
    ::= { civrZoneEnforcedZoneMemberTable 1 }

CivrZoneEnforcedZoneMemberEntry ::= SEQUENCE {
    civrZoneEnforcedZoneMemberType CIvrZoneMemberType,
    civrZoneEnforcedZoneMemberID OCTET STRING,
    civrZoneEnforcedZoneMemberAFId CIvrAutonomousFabricId,
    civrZoneEnforcedZoneMemberVsan VsanIndex,
    civrZoneEnforcedZoneMemberLunID OCTET STRING
    }

civrZoneEnforcedZoneMemberType OBJECT-TYPE
    SYNTAX CIvrZoneMemberType
--    Rsyntax INTEGER {
--        pwwnVsan(1)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The type of IV zone member.
         This object was copied from the civrZoneMemberType
         object in the civrZoneMemberTable at the time when
         the currently active zoneset was activated."
    ::= { civrZoneEnforcedZoneMemberEntry 2 }

civrZoneEnforcedZoneMemberID OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object represents this member's address.
         This object was copied from the civrZoneMemberID
         object in the civrZoneMemberTable at the time when
         the currently active zoneset was activated."
    ::= { civrZoneEnforcedZoneMemberEntry 3 }

civrZoneEnforcedZoneMemberAFId OBJECT-TYPE
    SYNTAX CIvrAutonomousFabricId
--    Rsyntax Gauge(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Autonomous Fabric identifier of the member.
         This object was copied from the civrZoneMemberAFId
         object in the civrZoneMemberTable at the time when
         the currently active zoneset was activated."
    ::= { civrZoneEnforcedZoneMemberEntry 4 }

civrZoneEnforcedZoneMemberVsan OBJECT-TYPE
    SYNTAX VsanIndex
--    Rsyntax INTEGER(1..4094)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The VSAN of the member.
         This object was copied from the civrZoneMemberVsan
         object in the civrZoneMemberTable at the time when
         the currently active zoneset was activated."
    ::= { civrZoneEnforcedZoneMemberEntry 5 }

civrZoneEnforcedZoneMemberLunID OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(0|8))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object specifies the Lun ID if IV Lun
         zoning is configured.
         This object was copied from the civrZoneMemberLunID
         object in the civrZoneMemberTable at the time when
         the currently active zoneset was activated."
    ::= { civrZoneEnforcedZoneMemberEntry 6 }

civrZoneSetStatusTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CivrZoneSetStatusEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table containing status of the current active
        IV Zoneset on each local VSANs."
    ::= { cimIvrStats 1 }

civrZoneSetStatusEntry OBJECT-TYPE
    SYNTAX CivrZoneSetStatusEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in the 
        civrZoneSetStatusTable."
    INDEX { vsanIndex }
    ::= { civrZoneSetStatusTable 1 }

CivrZoneSetStatusEntry ::= SEQUENCE {
    civrZoneSetStatus INTEGER
    }

civrZoneSetStatus OBJECT-TYPE
    SYNTAX INTEGER {
        idle(1),
        active(2),
        deactive(3),
        defaultZoneDeny(4),
        activationFailed(5),
        deactivationFailed(6),
        activationNotInitiated(7),
        activationFailedFabricChgFailed(8),
        deactivationNotInitiated(9),
        deactivationFailedFabChgFailed(10),
        activating(11),
        activatingWaitForLowestSwwn(12),
        activatingFabricChanging(13),
        deactivating(14),
        deactivatingWaitForLowestSwwn(15),
        deactivatingFabricChanging(16),
        defaultZonePermit(17),
        defaultZonePermitNoForce(18),
        defaultZonePermitActZsNoForce(19),
        denyNoActiveZoneset(20),
        activationFailedLowestWwnWait(21),
        deactivationFailedLowestWwnWait(22)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Status of the active IV Zoneset on this VSAN.
        
         idle                             - idle
         active                           - active
         deactive                         - deactive
         defaultZoneDeny                  - activation failed 
                                            because of default
                                            zone behaviour is 
                                            deny and there is no
                                            regular active
                                            zoneset.
         activationFailed                 - activation failed 
                                            (check 
                                            zoneSetFailCause 
                                            in CISCO-ZS-MIB
                                            for this VSAN)
         deactivationFailed               - deactivation failed
                                            (check 
                                            zoneSetFailCause 
                                            in CISCO-ZS-MIB
                                            for this VSAN)
         activationNotInitiated           - activation not 
                                            initiated
         activationFailedFabricChgFailed  - activation failed
                                            because of fabric 
                                            change failed
         deactivationNotInitiated         - deactivation
                                            not initiated
         deactivationFailedFabChgFailed   - deactivation failed
                                            because of fabric 
                                            changing
         activating                       - activation in 
                                            progress
         activatingWaitForLowestSwwn      - activation in 
                                            progress; waiting 
                                            for the lowest
                                            switch WWN switch to
                                            add IV zoneset to 
                                            the regular active
                                            zoneset.
         activatingFabricChanging         - activation in 
                                            progress; fabric is
                                            changing        
         deactivating                     - deactivation in 
                                            progress
         deactivatingWaitForLowestSwwn    - deactivation in 
                                            progress; waiting 
                                            for the lowest
                                            switch WWN switch to
                                            delete IV zoneset 
                                            from the regular 
                                            active zoneset.
         deactivatingFabricChanging       - deactivation in
                                            progress; fabric is
                                            changing
         defaultZonePermit                - activation failed 
                                            because of default
                                            zone behaviour is 
                                            permit
         defaultZonePermitNoForce         - activation failed
                                            because of default
                                            zone behaviour is
                                            permit with no 
                                            force option
         defaultZonePermitActZsNoForce    - activation failed
                                            because of default
                                            zone behaviour is
                                            permit and with 
                                            regular activate 
                                            zoneset and no 
                                            force option
         denyNoActiveZoneset              - activation failed
                                            because there is
                                            no active zoneset
         activationFailedLowestWwnWait    - activation failed
                                            waiting for switch
                                            with lowest wwn
                                            to activate this
                                            zoneset 
         deactivationFailedLowestWwnWait  - deactivation failed
                                            waiting for switch
                                            with lowest wwn
                                            to deactivate this
                                            zoneset
         
        ."
    ::= { civrZoneSetStatusEntry 1 }

civrTopologyConfiguredChecksum OBJECT-TYPE
    SYNTAX CIvrChecksum
--    Rsyntax OCTET STRING(SIZE(1..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The checksum of the configured IVR topology."
    ::= { cimIvrTopology 1 }

civrTopologyConfigTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CivrTopologyConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains the configured IVR topology.
         The topology is specified in terms of one or more 
         Autonomous Fabrics made of switches and the VSANs 
         to/from which the switches provide connectivity.
         The configured topology is not applied until it is made
         active using using object civrTopologyActivate."
    ::= { cimIvrTopology 2 }

civrTopologyConfigEntry OBJECT-TYPE
    SYNTAX CivrTopologyConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in this table."
    INDEX { civrTopologyConfigAutoFabricId, civrTopologyConfigSwitchWwn }
    ::= { civrTopologyConfigTable 1 }

CivrTopologyConfigEntry ::= SEQUENCE {
    civrTopologyConfigSwitchWwn FcNameId,
    civrTopologyConfigAutoFabricId CIvrAutonomousFabricId,
    civrTopologyConfigSwitchVsan2k FcList,
    civrTopologyConfigSwitchVsan4k FcList,
    civrTopologyConfigRowStatus RowStatus
    }

civrTopologyConfigSwitchWwn OBJECT-TYPE
    SYNTAX FcNameId
--    Rsyntax OCTET STRING(SIZE(8))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The configured switch WWN of this device."
    ::= { civrTopologyConfigEntry 1 }

civrTopologyConfigAutoFabricId OBJECT-TYPE
    SYNTAX CIvrAutonomousFabricId
--    Rsyntax Gauge(1..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The configured Autonomous Fabric id of this device."
    ::= { civrTopologyConfigEntry 2 }

civrTopologyConfigSwitchVsan2k OBJECT-TYPE
    SYNTAX FcList
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The list of configured VSANs that are part of IVR 
         topology on this device.
        
         Each octet within the value of this object specifies a
         set of eight VSANs, with the first octet specifying
         VSANs 0 through 7, the second octet specifying VSANs 8
         through 15, etc. Within each octet, the most 
         significant bit represents the lowest numbered VSAN, 
         and the least significant bit represents the highest 
         numbered VSAN. Thus, each VSAN, is represented by a 
         single bit within the value of this object. The 
         corresponding VSAN is contained in the IVR topology on 
         this device if and only if that bit has a value of '1'.
         If this object has a value which is less than 256 bytes
         long, then the VSANs which are not represented are not 
         considered to be in this list.
        
         If the values of both this object and corresponding 
         instance of civrTopologyConfigSwitchVsan4k are 
         zero-length string, then the IVR topology contains 
         only the default VSAN."
    DEFVAL { ''H }
    ::= { civrTopologyConfigEntry 3 }

civrTopologyConfigSwitchVsan4k OBJECT-TYPE
    SYNTAX FcList
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The list of configured VSANs that are part of IVR 
         topology on this device.
        
         Each octet within the value of this object specifies a 
         set of eight VSANs, with the first octet specifying 
         VSANs 2047 through 2054, the second octet specifying 
         VSANs 2055 through 2062, etc. Within each octet, the 
         most significant bit represents the lowest numbered 
         VSAN, and the least significant bit represents the 
         highest numbered VSAN. Thus, each VSAN, is represented
         by a single bit within the value of this object. The 
         corresponding VSAN is contained in the IVR topology on 
         device if and only if that bit has a value of '1'. 
         If this object has a value which is less than 256 bytes
         long, then the VSANs which are not represented are not 
         considered to be in the list. 
        
         If the values of both this object and corresponding 
         instance of civrTopologyConfigSwitchVsan2k are 
         zero-length string, then the IVR topology contains 
         only the default VSAN."
    DEFVAL { ''H }
    ::= { civrTopologyConfigEntry 4 }

civrTopologyConfigRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Status of this row."
    ::= { civrTopologyConfigEntry 5 }

civrTopologyActivate OBJECT-TYPE
    SYNTAX INTEGER {
        activate(1),
        noOp(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Setting this object to 'activate' is a request for 
          the configured IVR topology to be activated on this 
          device. i.e., for the current configuration of IVR 
          topology to be cloned, with the clone becoming the
          active IVR topology (civrTopologyActiveTable).
        
          The value of this object when read is always 'noOp'."
    ::= { cimIvrTopology 3 }

civrTopologyActivateTime OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The sysUpTime at which the IVR topology was most 
         recently activated. If the IVR topology has not been 
         activated prior to the last re-initialization of 
         the local network management system, then this object 
         will contain a zero value."
    ::= { cimIvrTopology 4 }

civrTopologyCopyActiveToConfig OBJECT-TYPE
    SYNTAX INTEGER {
        copy(1),
        noOp(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object copies the active IVR topology table
         to configured IVR topology table.
        
         If there is no active IVR topology, the copy will 
         result in an error. 
        
         No action is taken if this object is set to 'noOp'."
    ::= { cimIvrTopology 5 }

civrTopologyClearConfigured OBJECT-TYPE
    SYNTAX INTEGER {
        clear(1),
        noOp(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object clears the configured IVR topology
        table.
        
         No action is taken if this object is set to 'noOp'."
    ::= { cimIvrTopology 6 }

civrTopologyActiveChecksum OBJECT-TYPE
    SYNTAX CIvrChecksum
--    Rsyntax OCTET STRING(SIZE(1..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The checksum of the active IVR topology."
    ::= { cimIvrTopology 7 }

civrTopologyActiveTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CivrTopologyActiveEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains the IVR topology.
         The topology is specified in terms of one or more 
         Autonomous Fabrics made of switches and the VSANs 
         to/from which the switches provide connectivity."
    ::= { cimIvrTopology 8 }

civrTopologyActiveEntry OBJECT-TYPE
    SYNTAX CivrTopologyActiveEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in this table."
    INDEX { civrTopologyActiveAutoFabricId, civrTopologyActiveSwitchWwn }
    ::= { civrTopologyActiveTable 1 }

CivrTopologyActiveEntry ::= SEQUENCE {
    civrTopologyActiveSwitchWwn FcNameId,
    civrTopologyActiveAutoFabricId CIvrAutonomousFabricId,
    civrTopologyActiveSwitchVsan2k FcList,
    civrTopologyActiveSwitchVsan4k FcList
    }

civrTopologyActiveSwitchWwn OBJECT-TYPE
    SYNTAX FcNameId
--    Rsyntax OCTET STRING(SIZE(8))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The switch WWN of this device."
    ::= { civrTopologyActiveEntry 1 }

civrTopologyActiveAutoFabricId OBJECT-TYPE
    SYNTAX CIvrAutonomousFabricId
--    Rsyntax Gauge(1..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Autonomous Fabric id of this device."
    ::= { civrTopologyActiveEntry 2 }

civrTopologyActiveSwitchVsan2k OBJECT-TYPE
    SYNTAX FcList
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The list of VSANs that are part of IVR topology on 
         this device.
        
         Each octet within the value of this object specifies a
         set of eight VSANs, with the first octet specifying 
         VSANs 0 through 7, the second octet specifying VSANs 8
         through 15, etc. Within each octet, the most 
         significant bit represents the lowest numbered VSAN, 
         and the least significant bit represents the highest 
         numbered VSAN. Thus, each VSAN, is represented by a 
         single bit within the value of this object. The 
         corresponding VSAN is contained in the IVR topology on
         this device if and only if that bit has a value of '1'.
         If this object has a value which is less than 256 bytes
         long, then the VSANs which are not represented are not
         considered to be in this list.
        
         If the values of both this object and corresponding 
         instance of civrTopologyActiveSwitchVsan4k are 
         zero-length string, then the IVR topology contains 
         only the default VSAN."
    DEFVAL { ''H }
    ::= { civrTopologyActiveEntry 3 }

civrTopologyActiveSwitchVsan4k OBJECT-TYPE
    SYNTAX FcList
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The list of VSANs that are part of IVR topology on 
         this device.
        
         Each octet within the value of this object specifies a 
         set of eight VSANs, with the first octet specifying 
         VSANs 2047 through 2054, the second octet specifying 
         VSANs 2055 through 2062, etc. Within each octet, the 
         most significant bit represents the lowest numbered 
         VSAN, and the least significant bit represents the 
         highest numbered VSAN. Thus, each VSAN, is represented
         by a single bit within the value of this object. The 
         corresponding VSAN is contained in the IVR topology on 
         device if and only if that bit has a value of '1'. 
         If this object has a value which is less than 256 bytes
         long, then the VSANs which are not represented are not 
         considered to be in the list. 
        
         If the values of both this object and corresponding 
         instance of civrTopologyActiveSwitchVsan2k are 
         zero-length string, then the IVR topology contains 
         only the default VSAN."
    DEFVAL { ''H }
    ::= { civrTopologyActiveEntry 4 }

civrTopologyActive OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object indicates of IVR topology is active or not.
        If 'true', the IVR topology is active. And if it is 
        'false', the IVR topology is not active."
    ::= { cimIvrTopology 9 }

civrTopologyAfidConfigChecksum OBJECT-TYPE
    SYNTAX CIvrChecksum
--    Rsyntax OCTET STRING(SIZE(1..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The checksum of the Autonomous Fabric
         id (AFID) configurations."
    ::= { cimIvrTopology 10 }

civrTopologyAfidConfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CivrTopologyAfidConfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains the Autonomous Fabric id
         (AFID) configurations when automatic VSAN topology
         discovery is activated. An entry (conceptual row)
         in this table represents an AFID and its
         VSANs on a switch."
    ::= { cimIvrTopology 11 }

civrTopologyAfidConfEntry OBJECT-TYPE
    SYNTAX CivrTopologyAfidConfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in this table."
    INDEX { civrTopologyAfidConfSwitchWwn, civrTopologyAfidConfId }
    ::= { civrTopologyAfidConfTable 1 }

CivrTopologyAfidConfEntry ::= SEQUENCE {
    civrTopologyAfidConfSwitchWwn FcNameId,
    civrTopologyAfidConfId CIvrAutonomousFabricId,
    civrTopologyAfidConfSwitchVsan2k FcList,
    civrTopologyAfidConfSwitchVsan4k FcList,
    civrTopologyAfidConfRowStatus RowStatus
    }

civrTopologyAfidConfSwitchWwn OBJECT-TYPE
    SYNTAX FcNameId
--    Rsyntax OCTET STRING(SIZE(8))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The switch WWN of this device."
    ::= { civrTopologyAfidConfEntry 1 }

civrTopologyAfidConfId OBJECT-TYPE
    SYNTAX CIvrAutonomousFabricId
--    Rsyntax Gauge(1..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The configured Autonomous Fabric id of this device."
    ::= { civrTopologyAfidConfEntry 2 }

civrTopologyAfidConfSwitchVsan2k OBJECT-TYPE
    SYNTAX FcList
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The list of VSANs that are part of AFID
         (Autonomous Fabric ID) specified by
         civrTopologyConfigAutoFabricId on switch
         specified by civrTopologyConfigSwitchWwn.
        
         Each octet within the value of this object specifies a
         set of eight VSANs, with the first octet specifying
         VSANs 0 through 7, the second octet specifying VSANs 8
         through 15, etc. Within each octet, the most 
         significant bit represents the lowest numbered VSAN, 
         and the least significant bit represents the highest 
         numbered VSAN. Thus, each VSAN, is represented by a 
         single bit within the value of this object. The 
         corresponding VSAN is contained in this AFID on 
         this device if and only if that bit has a value of '1'.
         If this object has a value which is less than 256 bytes
         long, then the VSANs which are not represented are not 
         considered to be in this list.
        
         If the values of both this object and corresponding 
         instance of civrTopologyAfidConfSwitchVsan4k are 
         zero-length string, then the AFID configured on
         this device contains only the default VSAN."
    DEFVAL { ''H }
    ::= { civrTopologyAfidConfEntry 3 }

civrTopologyAfidConfSwitchVsan4k OBJECT-TYPE
    SYNTAX FcList
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The list of VSANs that are part of AFID
         (Autonomous Fabric ID) specified by
         civrTopologyConfigAutoFabricId on switch
         specified by civrTopologyConfigSwitchWwn.
        
         Each octet within the value of this object specifies a 
         set of eight VSANs, with the first octet specifying 
         VSANs 2048 through 2054, the second octet specifying 
         VSANs 2055 through 2062, etc. Within each octet, the 
         most significant bit represents the lowest numbered 
         VSAN, and the least significant bit represents the 
         highest numbered VSAN. Thus, each VSAN, is represented
         by a single bit within the value of this object. The 
         corresponding VSAN is contained in this AFID on this
         device if and only if that bit has a value of '1'. 
         If this object has a value which is less than 256 bytes
         long, then the VSANs which are not represented are not 
         considered to be in this list. 
        
         If the values of both this object and corresponding 
         instance of civrTopologyAfidConfSwitchVsan2k are 
         zero-length string, then the AFID configured on
         this device contains only the default VSAN."
    DEFVAL { ''H }
    ::= { civrTopologyAfidConfEntry 4 }

civrTopologyAfidConfRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Status of this row."
    ::= { civrTopologyAfidConfEntry 5 }

civrTopologyDefaultAfidChecksum OBJECT-TYPE
    SYNTAX CIvrChecksum
--    Rsyntax OCTET STRING(SIZE(1..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The checksum of the configured default AFIDs."
    ::= { cimIvrTopology 12 }

civrTopologyDefaultAfidTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CivrTopologyDefaultAfidEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains the default Autonomous Fabric
         id (AFID) configurations when automatic VSAN topology
         discovery is activated. An entry (conceptual row)
         in this table represents the default AFID for
         a switch."
    ::= { cimIvrTopology 13 }

civrTopologyDefaultAfidEntry OBJECT-TYPE
    SYNTAX CivrTopologyDefaultAfidEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in this table."
    INDEX { civrTopologyDefaultAfidSwitchWwn }
    ::= { civrTopologyDefaultAfidTable 1 }

CivrTopologyDefaultAfidEntry ::= SEQUENCE {
    civrTopologyDefaultAfidSwitchWwn FcNameId,
    civrTopologyDefaultAfidId CIvrAutonomousFabricId,
    civrTopologyDefaultAfidStatus RowStatus
    }

civrTopologyDefaultAfidSwitchWwn OBJECT-TYPE
    SYNTAX FcNameId
--    Rsyntax OCTET STRING(SIZE(8))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The switch WWN of this device."
    ::= { civrTopologyDefaultAfidEntry 1 }

civrTopologyDefaultAfidId OBJECT-TYPE
    SYNTAX CIvrAutonomousFabricId
--    Rsyntax Gauge(1..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The configured Default Autonomous Fabric id of
         this switch."
    DEFVAL { 1 }
    ::= { civrTopologyDefaultAfidEntry 2 }

civrTopologyDefaultAfidStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Status of this row."
    ::= { civrTopologyDefaultAfidEntry 3 }

civrTopologyIvrSrvGrpTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CivrTopologyIvrSrvGrpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains configurations of
         Inter-VSAN Routing (IVR) Service Group.
         An Inter VSAN Routing Service Group defines a
         logical boundary for Inter-VSAN Routing.
         Inter-VSAN Routing is restricted among VSANs
         within their own Inter-VSAN Routing Service
         Group only."
    ::= { cimIvrTopology 14 }

civrTopologyIvrSrvGrpEntry OBJECT-TYPE
    SYNTAX CivrTopologyIvrSrvGrpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in this table."
    INDEX { civrTopologyIvrSrvGrpName, civrTopologyAfidConfId }
    ::= { civrTopologyIvrSrvGrpTable 1 }

CivrTopologyIvrSrvGrpEntry ::= SEQUENCE {
    civrTopologyIvrSrvGrpName SnmpAdminString,
    civrTopologyIvrSrvGrpVsan2k FcList,
    civrTopologyIvrSrvGrpVsan4k FcList,
    civrTopologyIvrSrvGrpRowStatus RowStatus
    }

civrTopologyIvrSrvGrpName OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(1..80))
--    Rsyntax OCTET STRING(SIZE(1..80))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This object contains the name of the IVR Service
         Group corresponding to this conceptual row."
    ::= { civrTopologyIvrSrvGrpEntry 1 }

civrTopologyIvrSrvGrpVsan2k OBJECT-TYPE
    SYNTAX FcList
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The list of VSANs that are part of this
         IVR Service Group specified by
         civrTopologyIvrSrvGrpName.
        
         Each octet within the value of this object specifies a
         set of eight VSANs, with the first octet specifying
         VSANs 0 through 7, the second octet specifying VSANs 8
         through 15, etc. Within each octet, the most
         significant bit represents the lowest numbered VSAN,
         and the least significant bit represents the highest
         numbered VSAN. Thus, each VSAN, is represented by a
         single bit within the value of this object. The
         corresponding VSAN is contained in this IVR Service
         Group if and only if that bit has a value of '1'.
         If this object has a value which is less than 256 bytes
         long, then the VSANs which are not represented are not
         considered to be in this list."
    ::= { civrTopologyIvrSrvGrpEntry 2 }

civrTopologyIvrSrvGrpVsan4k OBJECT-TYPE
    SYNTAX FcList
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The list of VSANs that are part of this
         IVR Service Group specified by
         civrTopologyIvrSrvGrpName.
        
         Each octet within the value of this object specifies a
         set of eight VSANs, with the first octet specifying
         VSANs 2048 through 2054, the second octet specifying
         VSANs 2055 through 2062, etc. Within each octet, the
         most significant bit represents the lowest numbered
         VSAN, and the least significant bit represents the
         highest numbered VSAN. Thus, each VSAN, is represented
         by a single bit within the value of this object. The
         corresponding VSAN is contained in this IVR Service
         Group if and only if that bit has a value of '1'.
         If this object has a value which is less than 256 bytes
         long, then the VSANs which are not represented are not
         considered to be in the list."
    ::= { civrTopologyIvrSrvGrpEntry 3 }

civrTopologyIvrSrvGrpRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Status of this row."
    ::= { civrTopologyIvrSrvGrpEntry 4 }

civrTopologyClearAfidConfig OBJECT-TYPE
    SYNTAX INTEGER {
        clear(1),
        noOp(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object clears the AFID configuration 
         table, civrTopologyAfidConfTable, if this object is
         set to 'clear'.
        
         No action is taken if this object is set to 'noOp'."
    ::= { cimIvrTopology 15 }

civrAddIvrVirtualDomainsVsans2k OBJECT-TYPE
    SYNTAX FcList
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object lists VSANs in which the virtual domains 
        in a VSAN are added to the domain list (dmDatabaseTable
        in CISCO-DM-MIB) in that VSAN.
        Each octet within the value of this object specifies a
        set of eight VSANs, with the first octet specifying 
        VSANs 0 through 7, the second octet specifying VSANs 8
        through 15, etc. Within each octet, the most 
        significant bit represents the lowest numbered VSAN, 
        and the least significant bit represents the highest 
        numbered VSAN. Thus, each VSAN, is represented by a 
        single bit within the value of this object. The 
        corresponding VSAN is contained in the add virtual 
        domain VSAN list on this device if and only if that bit 
        has a value of '1'. If this object has a value which is 
        less than 256 bytes long, then the VSANs which are not 
        represented are not considered to be in this list.
        
        If the values of both this object and 
        civrAddIvrVirtualDomainsVsans4k are zero-length string, 
        then the Virtual Domains are not added to any VSANs."
    ::= { cimIvrVirtualDomains 1 }

civrAddIvrVirtualDomainsVsans4k OBJECT-TYPE
    SYNTAX FcList
--    Rsyntax OCTET STRING(SIZE(0..256))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object lists VSANs in which the virtual domains 
        in a VSAN are added to the domain list (dmDatabaseTable
        in CISCO-DM-MIB) in that VSAN.
        
        Each octet within the value of this object specifies a 
        set of eight VSANs, with the first octet specifying 
        VSANs 2048 through 2055, the second octet specifying 
        VSANs 2056 through 2063, etc. Within each octet, the 
        most significant bit represents the lowest numbered 
        VSAN, and the least significant bit represents the 
        highest numbered VSAN. Thus, each VSAN, is represented
        by a single bit within the value of this object. The 
        corresponding VSAN is contained in the add virtual 
        domain VSAN list on device if and only if that bit has 
        a value of '1'. If this object has a value which is less
        than 256 bytes long, then the VSANs which are not 
        represented are not 
        considered to be in the list. 
        
        If the values of both this object and 
        civrAddIvrVirtualDomainsVsans2k are zero-length string, 
        then the Virtual Domains are not added to any VSANs."
    ::= { cimIvrVirtualDomains 2 }

civrEnabledDeviceTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CivrEnabledDeviceEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains the all IVR enabled devices
        known to the local device on each of the local VSANs.
        Note that the devices are learned using an internal 
        protocol. So if a device in this table is not reachable,
        anymore from the local switch, then it is removed from
        this table. Also, if a new device is learned,
        it is added to this table."
    ::= { cimIvrStats 2 }

civrEnabledDeviceEntry OBJECT-TYPE
    SYNTAX CivrEnabledDeviceEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry (conceptual row) in this table. Each entry
        represents a device in a particular VSAN."
    INDEX { civrEnabledDeviceAutoFabricId, civrEnabledDeviceVsan, civrEnabledDeviceDomainId }
    ::= { civrEnabledDeviceTable 1 }

CivrEnabledDeviceEntry ::= SEQUENCE {
    civrEnabledDeviceVsan VsanIndex,
    civrEnabledDeviceAutoFabricId CIvrAutonomousFabricId,
    civrEnabledDeviceDomainId DomainId,
    civrEnabledDeviceSwitchWwn FcNameId,
    civrEnabledDeviceCapability OCTET STRING
    }

civrEnabledDeviceVsan OBJECT-TYPE
    SYNTAX VsanIndex
--    Rsyntax INTEGER(1..4094)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The VSAN corresponding to this entry."
    ::= { civrEnabledDeviceEntry 1 }

civrEnabledDeviceAutoFabricId OBJECT-TYPE
    SYNTAX CIvrAutonomousFabricId
--    Rsyntax Gauge(1..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Autonomous Fabric id corresponding to this 
        entry."
    ::= { civrEnabledDeviceEntry 2 }

civrEnabledDeviceDomainId OBJECT-TYPE
    SYNTAX DomainId
--    Rsyntax INTEGER(1..239)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The domain ID of this device corresponding this 
        entry."
    ::= { civrEnabledDeviceEntry 3 }

civrEnabledDeviceSwitchWwn OBJECT-TYPE
    SYNTAX FcNameId
--    Rsyntax OCTET STRING(SIZE(8))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The switch WWN of this device."
    ::= { civrEnabledDeviceEntry 4 }

civrEnabledDeviceCapability OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(1..2))
        -- BITS are:
        --   version1(0)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The switch WWN of this device."
    ::= { civrEnabledDeviceEntry 5 }

civrZoneMemberFabricId OBJECT-TYPE
    SYNTAX FcAddressId
--    Rsyntax OCTET STRING(SIZE(3))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The fabric address of the IV zone member which is not 
         able to participate in inter-VSAN communication because 
         of conflicting domainIDs."
    ::= { cimIvrStats 3 }

civDomainIdConflictVsan OBJECT-TYPE
    SYNTAX VsanIndex
--    Rsyntax INTEGER(1..4094)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The VSAN in which the domainID conflict occurred."
    ::= { cimIvrStats 4 }

civrZoneSetActDeactPartialSucss OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This object indicates if the IV zoneset 
         activation/deactivation was partially success."
    ::= { cimIvrStats 5 }

civrAfidMisConfigVsan OBJECT-TYPE
    SYNTAX VsanIndex
--    Rsyntax INTEGER(1..4094)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The VSAN in which the AFID mis-configuration
         occurred."
    ::= { cimIvrStats 6 }

civrAfidMisConfigLocalAfid OBJECT-TYPE
    SYNTAX CIvrAutonomousFabricId
--    Rsyntax Gauge(1..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The local AFID value in which the AFID
         mis-configuration occurred."
    ::= { cimIvrStats 7 }

civrAfidMisConfigRemoteAfid OBJECT-TYPE
    SYNTAX CIvrAutonomousFabricId
--    Rsyntax Gauge(1..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The remote AFID value in which the AFID
         mis-configuration occurred."
    ::= { cimIvrStats 8 }

civrAfidMisConfigLocalSWwn OBJECT-TYPE
    SYNTAX FcNameId
--    Rsyntax OCTET STRING(SIZE(8))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The local switch WWN in which the AFID
         mis-configuration occurred."
    ::= { cimIvrStats 9 }

civrAfidMisConfigRemoteSWwn OBJECT-TYPE
    SYNTAX FcNameId
--    Rsyntax OCTET STRING(SIZE(8))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The remote switch WWN in which the AFID
         mis-configuration occurred."
    ::= { cimIvrStats 10 }

civrTopologyMisConfigReason OBJECT-TYPE
    SYNTAX INTEGER {
        unknown(1),
        afidMismatch(2)
        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The reason for a topology mis-configuration."
    ::= { cimIvrStats 11 }

civrZoneActivationDoneNotify TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE ciscoIvrMIB
    VARIABLES {
        civrZoneSetName, civrZoneSetActvatDeactvatResult, 
        civrZoneSetActDeactPartialSucss }
--  Status
--    mandatory
    DESCRIPTION
        "This notification is generated on completion of an IV 
         zoneset activation.
         civrZoneSetActDeactPartialSucss is valid only if the
         activation was successful."
    ::= 1

civrZoneDeactivationDoneNotify TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE ciscoIvrMIB
    VARIABLES {
        civrZoneSetName, civrZoneSetActvatDeactvatResult, 
        civrZoneSetActDeactPartialSucss }
--  Status
--    mandatory
    DESCRIPTION
        "This notification is generated on completion of an IV 
         zoneset deactivation.
         civrZoneSetActDeactPartialSucss is valid only if the
         deactivation was successful."
    ::= 2

civrDomainConflictNotify TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE ciscoIvrMIB
    VARIABLES {
        civrZoneEnforcedZoneMemberID, 
        civrZoneEnforcedZoneMemberVsan, civrZoneMemberFabricId, 
        civDomainIdConflictVsan }
--  Status
--    mandatory
    DESCRIPTION
        "This notification is sent when domainID conflict 
         occurs in a VSAN. The domainIDs in all the VSANs 
         (dmDatabaseTable in CISCO-DM-MIB) which 
         are configured to be carrying inter-VSAN trafic 
         (civrTopologyConfigTable) must be unique. If not, there
         could be domainID conflicts."
    ::= 3

civrAfidConfigNotify TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE ciscoIvrMIB
    VARIABLES {
        civrAfidMisConfigLocalAfid, civrAfidMisConfigRemoteAfid, 
        civrAfidMisConfigLocalSWwn, civrAfidMisConfigRemoteSWwn, 
        civrAfidMisConfigVsan, civrTopologyMisConfigReason }
--  Status
--    mandatory
    DESCRIPTION
        "This notification is sent when an IVR
         AFID mis-configuration occurs."
    ::= 4

civrZoneConfigurationGroup OBJECT IDENTIFIER ::= { civrZoneServerMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects for displaying and configuring
--     IvrZone Membership.
--  objects
--    civrZoneSetNumber, civrZoneSetName, civrZoneSetZoneList, 
--    civrZoneSetLastChange, civrZoneSetChecksum, 
--    civrZoneSetRowStatus, civrZoneSetActivate, 
--    civrZoneSetActvatDeactvatResult, civrZoneSetDeActivate, 
--    civrZoneNumber, civrZoneName, civrZoneMemberList, 
--    civrZoneLastChange, civrZoneRowStatus, civrZoneMemberNumber, 
--    civrZoneMemberType, civrZoneMemberID, civrZoneMemberAFId, 
--    civrZoneMemberVsan, civrZonesetDbChecksum, 
--    civrActiveZonesetChecksum, civrZoneMemberRowStatus, 
--    civrZoneEnforcedZoneSetName, civrZoneEnforcedZoneSetZoneList, 
--    civrZoneEnforcedZoneSetActvtTime, civrZoneEnforcedZoneNumber, 
--    civrZoneEnforcedZoneName, civrZoneEnforcedZoneMemberList, 
--    civrZoneEnforcedZoneMemberNumber, 
--    civrZoneEnforcedZoneMemberType, civrZoneEnforcedZoneMemberID, 
--    civrZoneEnforcedZoneMemberAFId, 
--    civrZoneEnforcedZoneMemberVsan, 
--    civrZoneCopyZoneSetEnforcdToFull, civrZoneClearFullZoneDb, 
--    civrZonesetActivateForce

civrTopologyGroup OBJECT IDENTIFIER ::= { civrZoneServerMIBGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects for IVR topology.
--  objects
--    civrTopologyConfigSwitchVsan2k, 
--    civrTopologyConfigSwitchVsan4k, civrTopologyConfigRowStatus, 
--    civrTopologyActiveSwitchVsan2k, 
--    civrTopologyActiveSwitchVsan4k, 
--    civrTopologyConfiguredChecksum, civrTopologyActiveChecksum, 
--    civrTopologyActivate, civrTopologyActivateTime, 
--    civrTopologyCopyActiveToConfig, civrTopologyClearConfigured, 
--    civrTopologyActive

civrStatsGroup OBJECT IDENTIFIER ::= { civrZoneServerMIBGroups 3 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects for IVR status/statistics.
--  objects
--    civrZoneSetStatus, civrEnabledDeviceSwitchWwn, 
--    civrEnabledDeviceCapability, civDomainIdConflictVsan, 
--    civrZoneMemberFabricId, civrZoneSetActDeactPartialSucss

civrVirtualDomainsGroup OBJECT IDENTIFIER ::= { civrZoneServerMIBGroups 5 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects for IVR status/statistics.
--  objects
--    civrAddIvrVirtualDomainsVsans2k, 
--    civrAddIvrVirtualDomainsVsans4k

civrGenericGroup OBJECT IDENTIFIER ::= { civrZoneServerMIBGroups 6 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects for IVR generic
--     configurations.
--  objects
--    civrFcidNatMode, civrVsanTopologyAutoDisc

civrTopologyGroupRev2 OBJECT IDENTIFIER ::= { civrZoneServerMIBGroups 7 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects for IVR topology.
--  objects
--    civrTopologyAfidConfSwitchVsan2k, 
--    civrTopologyAfidConfSwitchVsan4k, 
--    civrTopologyAfidConfRowStatus, civrTopologyDefaultAfidId, 
--    civrTopologyDefaultAfidStatus, civrTopologyIvrSrvGrpVsan2k, 
--    civrTopologyIvrSrvGrpVsan4k, civrTopologyIvrSrvGrpRowStatus, 
--    civrTopologyAfidConfigChecksum, 
--    civrTopologyDefaultAfidChecksum, civrTopologyClearAfidConfig, 
--    civrAfidMisConfigVsan, civrAfidMisConfigLocalAfid, 
--    civrAfidMisConfigRemoteAfid, civrAfidMisConfigLocalSWwn, 
--    civrAfidMisConfigRemoteSWwn, civrTopologyMisConfigReason

civrZoneConfigurationGroupRev2 OBJECT IDENTIFIER ::= { civrZoneServerMIBGroups 8 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects to support SCSI read only,
--     Qos and Lun zoning in IVR Zone Membership
--     configurations.
--  objects
--    civrZoneReadOnly, civrZoneQosPriority, 
--    civrZoneEnforcedZoneReadOnly, civrZoneEnforcedZoneQosPriority, 
--    civrZoneMemberLunID, civrZoneEnforcedZoneMemberLunID, 
--    civrZoneSetTableNextIndex, civrZoneTableNextIndex

civrNotificationGroup OBJECT IDENTIFIER ::= { civrZoneServerMIBGroups 4 }
-- NOTIFICATION-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of notification(s) for monitoring 
--     IVR related events.
--  notifications
--    civrZoneActivationDoneNotify, civrZoneDeactivationDoneNotify, 
--    civrDomainConflictNotify

civrNotificationGroupRev2 OBJECT IDENTIFIER ::= { civrZoneServerMIBGroups 9 }
-- NOTIFICATION-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of notification(s) for monitoring 
--     IVR related events.
--  notifications
--    civrAfidConfigNotify

civrZoneServerMIBCompliance OBJECT IDENTIFIER ::= { civrZoneServerMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    deprecated
--  Descr
--    The compliance statement for entities which
--     implement the Zone Server.
--  Module
--    >>current<<
--   MandGroup
--    civrZoneConfigurationGroup
--   MandGroup
--    civrTopologyGroup
--   MandGroup
--    civrStatsGroup
--   MandGroup
--    civrNotificationGroup
--   ObjVar
--    civrZoneSetRowStatus
--   ObjVar
--    civrZoneRowStatus
--   ObjVar
--    civrZoneMemberRowStatus
--   ObjVar
--    civrTopologyConfigRowStatus
--   ObjVar
--    civrZoneMemberAFId

civrZoneServerMIBComplianceRev1 OBJECT IDENTIFIER ::= { civrZoneServerMIBCompliances 2 }
-- MODULE-COMPLIANCE
--  Status
--    deprecated
--  Descr
--    The compliance statement for entities which
--     implement the Zone Server.
--  Module
--    >>current<<
--   MandGroup
--    civrZoneConfigurationGroup
--   MandGroup
--    civrTopologyGroup
--   MandGroup
--    civrStatsGroup
--   MandGroup
--    civrNotificationGroup
--   MandGroup
--    civrVirtualDomainsGroup
--   ObjVar
--    civrZoneSetRowStatus
--   ObjVar
--    civrZoneRowStatus
--   ObjVar
--    civrZoneMemberRowStatus
--   ObjVar
--    civrTopologyConfigRowStatus
--   ObjVar
--    civrZoneMemberAFId

civrZoneServerMIBComplianceRev2 OBJECT IDENTIFIER ::= { civrZoneServerMIBCompliances 3 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for entities which
--     implement the Zone Server.
--  Module
--    >>current<<
--   MandGroup
--    civrZoneConfigurationGroup
--   MandGroup
--    civrTopologyGroup
--   MandGroup
--    civrStatsGroup
--   MandGroup
--    civrNotificationGroup
--   MandGroup
--    civrVirtualDomainsGroup
--   MandGroup
--    civrGenericGroup
--   MandGroup
--    civrTopologyGroupRev2
--   MandGroup
--    civrZoneConfigurationGroupRev2
--   MandGroup
--    civrNotificationGroupRev2
--   ObjVar
--    civrZoneSetRowStatus
--   ObjVar
--    civrZoneRowStatus
--   ObjVar
--    civrZoneMemberRowStatus
--   ObjVar
--    civrTopologyConfigRowStatus
--   ObjVar
--    civrTopologyAfidConfRowStatus
--   ObjVar
--    civrTopologyDefaultAfidStatus
--   ObjVar
--    civrTopologyIvrSrvGrpRowStatus
--   ObjVar
--    civrZoneMemberAFId


END