USR-USER-MAN-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, IpAddress, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 DisplayString FROM RFC1213-MIB; TruthValue ::= INTEGER UsrUserName ::= DisplayString(SIZE (1..64)) RowStatus ::= INTEGER -- IMPORTS -- Counter, IpAddress -- FROM RFC1155-SMI -- OBJECT-TYPE -- FROM RFC-1212 -- TRAP-TYPE -- FROM RFC-1215 -- TruthValue, -- RowStatus -- FROM SNMPv2-TC -- usrUserMan, UsrUserName, DisplayString -- FROM USR-DEFINITIONS-MIB; -- csg3Com OBJECT IDENTIFIER ::= { enterprises 429 } common OBJECT IDENTIFIER ::= { csg3Com 4 } usrUserMan OBJECT IDENTIFIER ::= { common 2 } usrUserManGroup OBJECT IDENTIFIER ::= { usrUserMan 1 } usrUserManTraps OBJECT IDENTIFIER ::= { usrUserMan 2 } -- Begin managed object definitions here... usrUserManRadiusIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the RADIUS server" --CONFIGURABLE ::= { usrUserManGroup 1 } usrUserManRadiusAltIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The alternate IP address of the RADIUS server" --CONFIGURABLE ::= { usrUserManGroup 2 } usrUserManRadiusAcctIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the RADIUS accounting server" --CONFIGURABLE ::= { usrUserManGroup 3 } usrUserManRadiusAcctAltIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the RADIUS alternate accounting server" --CONFIGURABLE ::= { usrUserManGroup 4 } usrUserManLocalAuthSuccesses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of local authentication successes" ::= { usrUserManGroup 5 } usrUserManLocalAuthFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of local authentication failures" ::= { usrUserManGroup 6 } usrUserManRadiusAuthSuccesses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of radius authentication successes" ::= { usrUserManGroup 7 } usrUserManRadiusAuthFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of radius authentication failures" ::= { usrUserManGroup 8 } usrUserManLocalUsers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of local users" ::= { usrUserManGroup 9 } usrUserManActiveUsers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of active users" ::= { usrUserManGroup 10 } usrUserManRetransmissions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of udp packet retransmissions" ::= { usrUserManGroup 11 } usrUserManUdpReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of udp packets received" ::= { usrUserManGroup 12 } usrUserManRadiusRetrans OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of times a timeout will occur when communicating with radius" --CONFIGURABLE ::= { usrUserManGroup 13 } usrUserManRadiusTimeout OBJECT-TYPE SYNTAX INTEGER (1..60) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum amount of time in seconds we will wait for a RADIUS response before retransmitting" --CONFIGURABLE ::= { usrUserManGroup 14 } usrUserManAcctRetrans OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of times a timeout will occur when communicating with radius accounting server" --CONFIGURABLE ::= { usrUserManGroup 15 } usrUserManAcctTimeout OBJECT-TYPE SYNTAX INTEGER (1..60) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum amount of time in seconds we will wait for a RADIUS accounting response before retransmitting" --CONFIGURABLE ::= { usrUserManGroup 16 } usrUserManLocalAuth OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Is local authentication on or off" --CONFIGURABLE ::= { usrUserManGroup 17 } usrUserManAcct OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Is accounting on or off" --CONFIGURABLE ::= { usrUserManGroup 18 } usrUserManAcctServers OBJECT-TYPE SYNTAX INTEGER { one(1), both(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Do we want to consider both servers specified as primary" -- CONFIGURABLE ::= { usrUserManGroup 19 } usrUserManRadiusAuth OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Is radius authentication on or off" --CONFIGURABLE ::= { usrUserManGroup 20 } usrUserManStartAccountTime OBJECT-TYPE SYNTAX INTEGER { connectionTime(1), authenticationTime(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When do we want to account from" --CONFIGURABLE ::= { usrUserManGroup 21 } usrUserManSnmpAccess OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Do we allow snmp to set our user table" --CONFIGURABLE ::= { usrUserManGroup 22 } usrUserManSaveUsers OBJECT-TYPE SYNTAX INTEGER { normal(1), save(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If we hit the save flag the users will be saved to flash" ::= { usrUserManGroup 23 } usrUserManRadiusSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The shared secret between the RADIUS server and pilgrim" --CONFIGURABLE ::= { usrUserManGroup 24 } -- User managers table definition usrUserManTable OBJECT-TYPE SYNTAX SEQUENCE OF UumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { usrUserManGroup 25 } uumEntry OBJECT-TYPE SYNTAX UumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { uumUserName } ::= { usrUserManTable 1 } UumEntry ::= SEQUENCE { uumUserName UsrUserName, uumStatus INTEGER, uumUserPassword OCTET STRING, uumServiceType INTEGER, uumFramedProtocol INTEGER, uumFramedIpAddress IpAddress, uumFramedIpNetmask IpAddress, uumFramedRouting INTEGER, uumFilterIdInput OCTET STRING, uumFramedMtu INTEGER, uumFramedCompression INTEGER, uumLoginIpHost IpAddress, uumLoginService INTEGER, uumLoginPort INTEGER, uumReplyMessage OCTET STRING, uumCallbackNumberOne OCTET STRING, uumExpiration OCTET STRING, uumFramedRoute OCTET STRING, uumFramedIpxNetwork OCTET STRING, uumSessionTimeout INTEGER, uumIdleTimeout INTEGER, uumBearerCapabilities INTEGER, uumSpeedOfConnection INTEGER, uumMaxChannels INTEGER, uumChannelExpansion INTEGER, uumChannelDecrement INTEGER, uumExpansionAlgorithm INTEGER, uumCompressionAlgorithm INTEGER, uumReceiveAccMap INTEGER, uumTransmitAccMap INTEGER, uumWhereCompression INTEGER, uumCompressionResetMode INTEGER, uumMinCompressionSize INTEGER, uumLocationType INTEGER, uumIp INTEGER, uumIpx INTEGER, uumFilterZones INTEGER, uumFilterIdOutput OCTET STRING, uumAppletalk INTEGER, uumBridging INTEGER, uumSpoofing INTEGER, uumHostType INTEGER, uumSendName OCTET STRING, uumSendPassword OCTET STRING, uumStartTime OCTET STRING, uumEndTime OCTET STRING, uumSendScript1 OCTET STRING, uumReplyScript1 OCTET STRING, uumSendScript2 OCTET STRING, uumReplyScript2 OCTET STRING, uumSendScript3 OCTET STRING, uumReplyScript3 OCTET STRING, uumSendScript4 OCTET STRING, uumReplyScript4 OCTET STRING, uumSendScript5 OCTET STRING, uumReplyScript5 OCTET STRING, uumSendScript6 OCTET STRING, uumReplyScript6 OCTET STRING, uumTerminalType OCTET STRING, uumAppletalkNetworkRange OCTET STRING, uumLocalIpAddress IpAddress, uumRoutingProtocol INTEGER, -- deprecated uumCallbackNumberTwo OCTET STRING, uumModemGroup OCTET STRING, uumIpxRouting INTEGER, uumIpxWan INTEGER, uumIpRipSendDefault INTEGER, uumIpRipSendRoutes INTEGER, uumIpRipSendSubnets INTEGER, uumIpRipAcceptDefault INTEGER, uumIpRipSplitHorizon INTEGER, uumIpRipPoisonReverse INTEGER, uumIpRipFlashUpdate INTEGER, uumIpRipSimpleAuth INTEGER, uumIpRipV1Send INTEGER, uumIpRipV1Receive INTEGER, uumIpRipV2Receive INTEGER, uumIpRipSilent INTEGER, uumSimpleAuthPassword OCTET STRING, uumIpDefaultRouteOption INTEGER, uumIpRoutingRipV1 INTEGER, uumIpRoutingRipV2 INTEGER, uumIpRoutingOspf INTEGER, uumOspfAddresslessIfIndex INTEGER, uumLoginHostName OCTET STRING, uumIgmpInterfaceQueryInterval INTEGER, uumIgmpInterfaceQueryMaxResponseTime INTEGER, uumIgmpInterfaceVersion INTEGER, uumIgmpInterfaceRobustness INTEGER, uumIgmpInterfaceStatus INTEGER, uumIgmpInterfaceMcastFwdEnabled INTEGER, uumIpxRipUpdate INTEGER, uumIpxRipAgeMultiplier INTEGER, uumIpxSapUpdate INTEGER, uumIpxSapAgeMultiplier INTEGER, uumEncryptionAlgorithm INTEGER, uumTunnelType INTEGER, uumTunnelMediumType INTEGER, uumTunnelClientEndpoint OCTET STRING, uumTunnelServerEndpoint OCTET STRING, uumTunnelPassword OCTET STRING, uumTunnelPrivateGroupID OCTET STRING, uumTunnelSecurity INTEGER, uumPrimaryDNSServer IpAddress, uumSecondaryDNSServer IpAddress, uumUserTapStatus INTEGER, uumUserTapFormat INTEGER, uumUserTapOutput INTEGER, uumUserTapFacility INTEGER, uumUserTapLoglevel INTEGER, uumUserTapAddress IpAddress, uumMulticastProxy INTEGER, uumNasIpAddress IpAddress, uumNasPort INTEGER, uumFramedCallbackId INTEGER, uumState OCTET STRING, uumClass OCTET STRING, uumCalledStationId OCTET STRING, uumCallingStationId OCTET STRING, uumNasIdentifier OCTET STRING, uumCipIfName OCTET STRING, uumPPPLocalIpAddress IpAddress, uumPPPRemoteIpAddress IpAddress, uumSessionvars IpAddress, uumChatScriptName OCTET STRING, uumPortLimit INTEGER, uumPppSourceIpFilter INTEGER, uumCallbackType INTEGER, uumIsdnDataCallType INTEGER, uumDNISReAuth INTEGER, uumReChapTimeout INTEGER, uumNextHopGateway IpAddress, uumLocalTcpPort INTEGER, uumConnectionvars IpAddress, uumShowConnVar INTEGER, uumSpecialXonXoff INTEGER, uumTelnetOptions INTEGER, uumMlPPPFragThreshold INTEGER, uumVPNName OCTET STRING, uumVPNID INTEGER, uumVPNGateway IpAddress, uumTrafficThreshold INTEGER, uumTunnelAssignmentId OCTET STRING, uumKeepAliveInterval INTEGER, uumIpSecPolicyFile DisplayString, uumIpSecPolicyAccess INTEGER, uumIpSecPolicyType INTEGER, uumIpSecPolicyConfiguration INTEGER } uumUserName OBJECT-TYPE SYNTAX UsrUserName ACCESS read-only STATUS mandatory DESCRIPTION "The users name" ::= { uumEntry 1 } uumStatus OBJECT-TYPE SYNTAX INTEGER { delete(1), inactive(2), active(3), enabled(4), disabled(5), active-disabled(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The status field for delete" --CONFIGURABLE ::= { uumEntry 2 } uumUserPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The users password" --CONFIGURABLE ::= { uumEntry 3 } uumServiceType OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The bitmap indicating one or more types of user: login 0x1, framed 0x2, callback 0x4, dial-out 0x8, administrative 0x10" --CONFIGURABLE ::= { uumEntry 4 } uumFramedProtocol OBJECT-TYPE SYNTAX INTEGER { ppp(1), slip(2), arap(3), frame-relay(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The framed users protocol" --CONFIGURABLE ::= { uumEntry 5 } uumFramedIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP destination for the framed user" --CONFIGURABLE ::= { uumEntry 6 } uumFramedIpNetmask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The destinations netmask" --CONFIGURABLE ::= { uumEntry 7 } uumFramedRouting OBJECT-TYPE SYNTAX INTEGER { none(4), broadcastRoutingPackets(1), listenForRoutingPackets(2), broadcastAndListen(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The routing defined for a framed user" --CONFIGURABLE ::= { uumEntry 8 } uumFilterIdInput OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The input or output filter defined for the user" --CONFIGURABLE ::= { uumEntry 9 } uumFramedMtu OBJECT-TYPE SYNTAX INTEGER (0..8192) ACCESS read-write STATUS mandatory DESCRIPTION "The framed maximum transmission unit" --CONFIGURABLE ::= { uumEntry 10 } uumFramedCompression OBJECT-TYPE SYNTAX INTEGER { none(99), tcpIpCompression(1), ipxCompression(2) -- deprecated } ACCESS read-write STATUS mandatory DESCRIPTION "The compression being used for the framed user" --CONFIGURABLE ::= { uumEntry 11 } uumLoginIpHost OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP destination for the login user" --CONFIGURABLE ::= { uumEntry 12 } uumLoginService OBJECT-TYPE SYNTAX INTEGER { telnet(5), rlogin(1), tcp(2), lat(4), ping(1000) } ACCESS read-write STATUS mandatory DESCRIPTION "The login user's protocol" --CONFIGURABLE ::= { uumEntry 13 } uumLoginPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The tcp port the user will use" --CONFIGURABLE ::= { uumEntry 14 } uumReplyMessage OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The message to be displayed to the user" --CONFIGURABLE ::= { uumEntry 15 } uumCallbackNumberOne OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The first phone number configured for this user" --CONFIGURABLE ::= { uumEntry 16 } uumExpiration OBJECT-TYPE SYNTAX OCTET STRING (SIZE (12)) ACCESS read-write STATUS mandatory DESCRIPTION "The users expiration date" --CONFIGURABLE ::= { uumEntry 17} uumFramedRoute OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-only STATUS mandatory DESCRIPTION "The framed route for the user" ::= { uumEntry 18 } uumFramedIpxNetwork OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "The ipx network defined for the user" --CONFIGURABLE ::= { uumEntry 19 } uumSessionTimeout OBJECT-TYPE SYNTAX INTEGER (0..86400) ACCESS read-write STATUS mandatory DESCRIPTION "The amount of time in seconds before time out" --CONFIGURABLE ::= { uumEntry 20 } uumIdleTimeout OBJECT-TYPE SYNTAX INTEGER (0..86400) ACCESS read-write STATUS mandatory DESCRIPTION "The amount of idle time in seconds before time out" --CONFIGURABLE ::= { uumEntry 21 } uumBearerCapabilities OBJECT-TYPE SYNTAX INTEGER { digital(1), analog(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of transmission" --CONFIGURABLE ::= { uumEntry 22 } uumSpeedOfConnection OBJECT-TYPE SYNTAX INTEGER { auto(1), fifty-six-k(2), sixty-four-k(3), voice(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The speed of the connection" --CONFIGURABLE ::= { uumEntry 23 } uumMaxChannels OBJECT-TYPE SYNTAX INTEGER (0..16) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of channels that may be used" --CONFIGURABLE ::= { uumEntry 24 } uumChannelExpansion OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "The percentage for channel expansion" --CONFIGURABLE ::= { uumEntry 25 } uumChannelDecrement OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "The percentage for channel decrement" --CONFIGURABLE ::= { uumEntry 26 } uumExpansionAlgorithm OBJECT-TYPE SYNTAX INTEGER { constant(1), linear(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The expansion algorithm being used" --CONFIGURABLE ::= { uumEntry 27 } uumCompressionAlgorithm OBJECT-TYPE SYNTAX INTEGER { none(99), stac(1), ascend(2), microsoft(3), auto(4), deflate(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The compression algorithm to be used" --CONFIGURABLE ::= { uumEntry 28 } uumReceiveAccMap OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The receive acc mapping" --CONFIGURABLE ::= { uumEntry 29 } uumTransmitAccMap OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The transmit acc mapping" --CONFIGURABLE ::= { uumEntry 30 } uumWhereCompression OBJECT-TYPE SYNTAX INTEGER { link(1), bundle(2) } ACCESS read-only STATUS obsolete DESCRIPTION "The area where compression should be done" -- CONFIGURABLE ::= { uumEntry 31 } uumCompressionResetMode OBJECT-TYPE SYNTAX INTEGER { auto(1), resetEveryPacket(2), resetEveryError(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The mode that the compression should be reset in" --CONFIGURABLE ::= { uumEntry 32 } uumMinCompressionSize OBJECT-TYPE SYNTAX INTEGER (0..2048) ACCESS read-write STATUS mandatory DESCRIPTION "The minimum size for compression" --CONFIGURABLE ::= { uumEntry 33 } uumLocationType OBJECT-TYPE SYNTAX INTEGER { continuous(1), onDemand(2), manual(3), timed(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of location user" --CONFIGURABLE ::= { uumEntry 34 } uumIp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Ip enabled or disabled" --CONFIGURABLE ::= { uumEntry 35 } uumIpx OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Ipx enabled or disabled" --CONFIGURABLE ::= { uumEntry 36 } uumFilterZones OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Arap needed to define filter zones" --CONFIGURABLE ::= { uumEntry 37 } uumFilterIdOutput OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The output filter defined for the user" --CONFIGURABLE ::= { uumEntry 38 } uumAppletalk OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Appletalk enabled or disabled" --CONFIGURABLE ::= { uumEntry 39 } uumBridging OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Bridging enabled or disabled" --CONFIGURABLE ::= { uumEntry 40 } uumSpoofing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Ipx spoofing enabled or disabled" --CONFIGURABLE ::= { uumEntry 41 } uumHostType OBJECT-TYPE SYNTAX INTEGER { prompt(1), default(2), specified(3) } ACCESS read-only STATUS obsolete DESCRIPTION "The means for specifying a host for this user" -- CONFIGURABLE ::= { uumEntry 42 } uumSendName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..240)) ACCESS read-only STATUS mandatory DESCRIPTION "Name we use when challenged for authentication" --CONFIGURABLE ::= { uumEntry 43 } uumSendPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..240)) ACCESS read-only STATUS mandatory DESCRIPTION "Password we use when challenged for authentication" --CONFIGURABLE ::= { uumEntry 44 } uumStartTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (12)) ACCESS read-write STATUS mandatory DESCRIPTION "Daily time we start timed location" --CONFIGURABLE ::= { uumEntry 45 } uumEndTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (12)) ACCESS read-write STATUS mandatory DESCRIPTION "Daily time we stop timed location" --CONFIGURABLE ::= { uumEntry 46 } uumSendScript1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The first send script for this dial-out user" --CONFIGURABLE ::= { uumEntry 47 } uumReplyScript1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The first reply script for this dial-out user" --CONFIGURABLE ::= { uumEntry 48 } uumSendScript2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The second send script for this dial-out user" --CONFIGURABLE ::= { uumEntry 49 } uumReplyScript2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The second reply script for this dial-out user" --CONFIGURABLE ::= { uumEntry 50 } uumSendScript3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The third send script for this dial-out user" --CONFIGURABLE ::= { uumEntry 51 } uumReplyScript3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The third reply script for this dial-out user" --CONFIGURABLE ::= { uumEntry 52 } uumSendScript4 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The fourth send script for this dial-out user" --CONFIGURABLE ::= { uumEntry 53 } uumReplyScript4 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The fourth reply script for this dial-out user" --CONFIGURABLE ::= { uumEntry 54 } uumSendScript5 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The fifth send script for this dial-out user" --CONFIGURABLE ::= { uumEntry 55 } uumReplyScript5 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The fifth reply script for this dial-out user" --CONFIGURABLE ::= { uumEntry 56 } uumSendScript6 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The sixth send script for this dial-out user" --CONFIGURABLE ::= { uumEntry 57 } uumReplyScript6 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The sixth reply script for this dial-out user" --CONFIGURABLE ::= { uumEntry 58 } uumTerminalType OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The terminal type for the user" --CONFIGURABLE ::= { uumEntry 59 } uumAppletalkNetworkRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "The appletalk network range for the user" --CONFIGURABLE ::= { uumEntry 60 } uumLocalIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The local ip address configured for a dial-out user" --CONFIGURABLE ::= { uumEntry 61 } uumRoutingProtocol OBJECT-TYPE SYNTAX INTEGER { rip1(1), rip2(2) } ACCESS read-write STATUS deprecated DESCRIPTION "The routing protocol configured for a user" -- CONFIGURABLE ::= { uumEntry 62 } uumCallbackNumberTwo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The second phone number configured for this user" --CONFIGURABLE ::= { uumEntry 63 } uumModemGroup OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The modem group string for the user" --CONFIGURABLE ::= { uumEntry 64 } uumIpxRouting OBJECT-TYPE SYNTAX INTEGER { none(99), send(1), listen(2), respond(3), all(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The ipx routing defined for a framed user" --CONFIGURABLE ::= { uumEntry 65 } uumIpxWan OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Is ipx wan enabled or disabled for the user" --CONFIGURABLE ::= { uumEntry 66 } uumIpRipSendDefault OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IP RIP flag" --CONFIGURABLE ::= { uumEntry 67 } uumIpRipSendRoutes OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IP RIP flag" --CONFIGURABLE ::= { uumEntry 68 } uumIpRipSendSubnets OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IP RIP flag" --CONFIGURABLE ::= { uumEntry 69 } uumIpRipAcceptDefault OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IP RIP flag" --CONFIGURABLE ::= { uumEntry 70 } uumIpRipSplitHorizon OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IP RIP flag" --CONFIGURABLE ::= { uumEntry 71 } uumIpRipPoisonReverse OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IP RIP flag" --CONFIGURABLE ::= { uumEntry 72 } uumIpRipFlashUpdate OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IP RIP flag" --CONFIGURABLE ::= { uumEntry 73 } uumIpRipSimpleAuth OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "IP RIP flag" ::= { uumEntry 74 } uumIpRipV1Send OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IP RIP flag" --CONFIGURABLE ::= { uumEntry 75 } uumIpRipV1Receive OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IP RIP flag" --CONFIGURABLE ::= { uumEntry 76 } uumIpRipV2Receive OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IP RIP flag" --CONFIGURABLE ::= { uumEntry 77 } uumIpRipSilent OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IP RIP flag" --CONFIGURABLE ::= { uumEntry 78 } uumSimpleAuthPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "The IP RIP simple authentication password" --CONFIGURABLE ::= { uumEntry 79 } uumIpDefaultRouteOption OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If enable (1) a default route will be created using the remote users IP address. If disable (2) no such route is created." --CONFIGURABLE ::= { uumEntry 80 } uumLoginHostName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The destination host name for the login user" --CONFIGURABLE ::= { uumEntry 81 } uumIgmpInterfaceQueryInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The frequency at which IGMP Host-Query packets are transmitted on this interface." DEFVAL { 125 } --CONFIGURABLE ::= { uumEntry 82 } uumIgmpInterfaceQueryMaxResponseTime OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum query response time advertised in IGMPv2 queries on this interface. Smaller values allow a router to prune groups faster." DEFVAL { 10 } --CONFIGURABLE ::= { uumEntry 83 } uumIgmpInterfaceRobustness OBJECT-TYPE SYNTAX INTEGER (1..5) ACCESS read-write STATUS mandatory DESCRIPTION "The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lousy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses." DEFVAL { 2 } --CONFIGURABLE ::= { uumEntry 84 } uumIgmpInterfaceVersion OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum query response time advertised in IGMPv2 queries on this interface. Smaller values allow a router to prune groups faster." DEFVAL { 2 } --CONFIGURABLE ::= { uumEntry 85 } uumIgmpInterfaceStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If enabled, Multicast packets will be routed on this user's interface." DEFVAL { enabled } --CONFIGURABLE ::= { uumEntry 86 } uumIgmpInterfaceMcastFwdEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If enabled Multicast packets will be forwarded on this user's interface." DEFVAL { enabled } --CONFIGURABLE ::= { uumEntry 87 } uumIpxRipUpdate OBJECT-TYPE SYNTAX INTEGER (30..86400) ACCESS read-write STATUS mandatory DESCRIPTION "The IPX RIP update interval in seconds" DEFVAL { 60 } --CONFIGURABLE ::= { uumEntry 88 } uumIpxRipAgeMultiplier OBJECT-TYPE SYNTAX INTEGER(1..1080) ACCESS read-write STATUS mandatory DESCRIPTION "The IPX RIP multiplier for information received in periodic updates" DEFVAL { 4 } --CONFIGURABLE ::= { uumEntry 89 } uumIpxSapUpdate OBJECT-TYPE SYNTAX INTEGER(30..86400) ACCESS read-write STATUS mandatory DESCRIPTION "The IPX SAP update interval in seconds" DEFVAL { 60 } --CONFIGURABLE ::= { uumEntry 90 } uumIpxSapAgeMultiplier OBJECT-TYPE SYNTAX INTEGER(1..1080) ACCESS read-write STATUS mandatory DESCRIPTION "The IPX SAP multiplier for information received in periodic updates" DEFVAL { 4 } --CONFIGURABLE ::= { uumEntry 91 } uumEncryptionAlgorithm OBJECT-TYPE SYNTAX INTEGER { none(99), auto(1), microsoft40bit(2), microsoft128bit(3), required(4), microsoft56bit(5), bit40ornone(6), bit128ornone(7), bit56ornone(8), bit128orbit56(9), bit128orbit56ornone(10), bit128orbit40(11), bit128orbit40ornone(12), bit56orbit40(13), bit56orbit40ornone(14) } ACCESS read-write STATUS mandatory DESCRIPTION "The encryption algorithm to be used" --CONFIGURABLE ::= { uumEntry 92 } uumTunnelType OBJECT-TYPE SYNTAX INTEGER { none(99), pptp(1), l2f(2), l2tp(3), atmp(4), vtp(5), ah(6), ip-ip(7), min-ip-ip(8), esp(9), gre(10), dvs(11), ip-in-ip(12) } ACCESS read-write STATUS mandatory DESCRIPTION "The tunneling protocol to be used for this user" DEFVAL { pptp } --CONFIGURABLE ::= { uumEntry 93 } uumTunnelMediumType OBJECT-TYPE SYNTAX INTEGER { ipv4(1), ipv6(2), nsap(3), hdlc(4), bbn1822(5), e802(6), e163(7), e164(8), f69(9), x121(10), ipx(11), appletalk(12), decnetIV(13), banyanVines(14), e164NSAP(15) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates which transport medium to use when creating a tunnel for those protocols (such as L2TP) that can operate over multiple transports." DEFVAL { ipv4 } --CONFIGURABLE ::= { uumEntry 94 } uumTunnelClientEndpoint OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The address of the initiator end of the tunnel." --CONFIGURABLE ::= { uumEntry 95 } uumTunnelServerEndpoint OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The address of the server end of the tunnel." --CONFIGURABLE ::= { uumEntry 96 } uumTunnelPassword OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The password of the tunnel." --CONFIGURABLE ::= { uumEntry 97 } uumTunnelPrivateGroupID OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The group ID for the tunneled session." --CONFIGURABLE ::= { uumEntry 98 } uumTunnelSecurity OBJECT-TYPE SYNTAX INTEGER { none(99), control-Only(1), data-Only(2), both-Data-And-Control(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The security level of the tunnel." DEFVAL { none } --CONFIGURABLE ::= { uumEntry 99 } uumPrimaryDNSServer OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The primary dns server for the user" DEFVAL { 0 } --CONFIGURABLE ::= { uumEntry 100 } uumSecondaryDNSServer OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The secondary DNS server for the user" DEFVAL { 0 } --CONFIGURABLE ::= { uumEntry 101 } uumUserTapStatus OBJECT-TYPE SYNTAX INTEGER { disabled(2), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Is this user to be tapped" --CONFIGURABLE ::= { uumEntry 102 } uumUserTapFormat OBJECT-TYPE SYNTAX INTEGER { ascii(3), hex(1), clear(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The tap format if tap is enabled" --CONFIGURABLE ::= { uumEntry 103 } uumUserTapOutput OBJECT-TYPE SYNTAX INTEGER { syslog(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Send the tapped output to syslog" --CONFIGURABLE ::= { uumEntry 104 } uumUserTapFacility OBJECT-TYPE SYNTAX INTEGER { auth(1), level0(2), level1(3), level2(4), level3(5), level4(6), level5(7), level6(8), level7(9) } ACCESS read-write STATUS mandatory DESCRIPTION "The syslog facility to send the output to." --CONFIGURABLE ::= { uumEntry 105 } uumUserTapLoglevel OBJECT-TYPE SYNTAX INTEGER { critical(4), unusual(1), common(2), verbose(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The syslog level to send the output to." --CONFIGURABLE ::= { uumEntry 106 } uumUserTapAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The syslogd address" --CONFIGURABLE ::= { uumEntry 107 } uumMulticastProxy OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If Multicast will be proxied" DEFVAL { disabled } --CONFIGURABLE ::= { uumEntry 108 } uumNasIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The NAS IP address" --CONFIGURABLE ::= { uumEntry 113 } uumNasPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The NAS Port Attribute" --CONFIGURABLE ::= { uumEntry 114 } uumFramedCallbackId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Framed Callback Identifier attribute" --CONFIGURABLE ::= { uumEntry 115 } uumState OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "State attribute" --CONFIGURABLE ::= { uumEntry 116 } uumClass OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Class attribute" --CONFIGURABLE ::= { uumEntry 117 } uumCalledStationId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Called Station Id" --CONFIGURABLE ::= { uumEntry 118 } uumCallingStationId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Calling Station Id" --CONFIGURABLE ::= { uumEntry 119 } uumNasIdentifier OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "NAS ID" --CONFIGURABLE ::= { uumEntry 120 } uumCipIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "CIP Interface Name" --CONFIGURABLE ::= { uumEntry 121 } uumPPPLocalIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "PPP Local IP Address" --CONFIGURABLE ::= { uumEntry 122 } uumPPPRemoteIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "PPP Remote IP Address" --CONFIGURABLE ::= { uumEntry 123 } uumSessionvars OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { uumEntry 126 } uumChatScriptName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The chat script name configured for the user" --CONFIGURABLE ::= { uumEntry 127 } uumPortLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" --CONFIGURABLE ::= { uumEntry 128 } uumPppSourceIpFilter OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "PPP Source Address Ip Filer " --CONFIGURABLE ::= { uumEntry 129 } uumCallbackType OBJECT-TYPE SYNTAX INTEGER { normal(1), ani(2), static(3), dynamic(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The Callback Type. Normal to dial callback users using the existing phone number field. ANI to dial callback users using the number supplied with the caller ID. Static to dial callback users using the numbers provided in the DialGroup specified for this user. Dynamic to dial callback users using the numbers provided during LCP negotiations." --CONFIGURABLE ::= { uumEntry 131} uumIsdnDataCallType OBJECT-TYPE SYNTAX INTEGER { notConfigured(99), cleared(1), dataovervoice(2), restricted56k(3), v11056k(4), unrestricted64k(5), asynctosyncppp(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The ISDN customized CallType. The values represent a series of AT commands that users of the profile can generate. For 'cleared' no AT command will be generated. dataovervoice *V2=3 S67.1=0 restricted56k *V2=4 S67.1=1 S67.2=0 v11056k *V2=2 S67.1=1 S67.2=0 unrestricted64k *V2=4 S67.1=1 S67.2=1 asynctosyncppp *V2=5 S67.1=0 where *V2=2 -> V.110 Rate Adaption only =3 -> Modem/Fax Emulation only =4 -> Clear Channel only =5 -> Async to sync PPP S67.1=0 -> Rate not fixed =1 -> Rate fixed S67.2=0 -> Connect at 56k =1 -> Connect at 64k " --DEFVAL { 1 } --CONFIGURABLE ::= { uumEntry 132} uumDNISReAuth OBJECT-TYPE SYNTAX INTEGER { none(99), any(1), chap(2), eap(3), mschap(4), pap(5), proxyEap(6) } ACCESS read-write STATUS mandatory DESCRIPTION "DNIS Re-Authentication flag " --CONFIGURABLE ::= { uumEntry 139 } uumReChapTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Re Chap timeout for PPP" --CONFIGURABLE ::= { uumEntry 140 } uumNextHopGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The VPN-neighbour. " --CONFIGURABLE ::= { uumEntry 130 } uumLocalTcpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Local TCP port of telnet/CTCP login user" ::= { uumEntry 141 } uumConnectionvars OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { uumEntry 144 } uumShowConnVar OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "For the CLI command show connection " ::= { uumEntry 145 } uumSpecialXonXoff OBJECT-TYPE SYNTAX INTEGER { disabled(2), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Special Xon Xoff flow control \n" --CONFIGURABLE ::= { uumEntry 160 } uumTelnetOptions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "User specific Telnet Options \n" --CONFIGURABLE ::= { uumEntry 161 } uumMlPPPFragThreshold OBJECT-TYPE SYNTAX INTEGER(64..4096) ACCESS read-write STATUS mandatory DESCRIPTION "Multilink fragmentation threshold" --CONFIGURABLE ::= { uumEntry 165 } uumIpRoutingRipV1 OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or disables the IP RIPv1 routing protocol for this User" --CONFIGURABLE ::= { uumEntry 133 } uumIpRoutingRipV2 OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or disables the IP RIPv2 routing protocol for this User" --CONFIGURABLE ::= { uumEntry 134 } uumIpRoutingOspf OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or disables the IP OSPF routing protocol for this User" --CONFIGURABLE ::= { uumEntry 135 } uumOspfAddresslessIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An arbitary 32-bit integer value defined by the user to be used with Addressless interfaces. This addresslessIfIndex will bind with the configured OSPF INTF addresslessIfIndex, if one was configured." ::= { uumEntry 136 } uumIpSecPolicyFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of IP Security Policy filename associated with that user. -Note: This feature is available from Hiper ARC 5.0 release onwards." --CONFIGURABLE ::= { uumEntry 155 } uumIpSecPolicyAccess OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This flag defines whether the IP Security policy access is enabled or disabled. Note: This feature is available from Hiper ARC 5.0 release onwards." DEFVAL { disabled } ::= { uumEntry 156 } uumIpSecPolicyType OBJECT-TYPE SYNTAX INTEGER { domain-based(2), user-based(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This flag defines whether the IP Security policy type is user-based or domain-based. Note: This feature is available from Hiper ARC 5.0 release onwards" DEFVAL { domain-based } ::= { uumEntry 157 } uumIpSecPolicyConfiguration OBJECT-TYPE SYNTAX INTEGER { static(2), dynamic(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This flag specifies whether IP Security Policy is applied in statically or dynamically. Note: This feature is available only from Hiper ARC 5.0 onwards." DEFVAL { static } ::= { uumEntry 158 } uumVPNGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The VPN-Gateway. " ::= { uumEntry 162 } uumVPNID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VPN-ID. " ::= { uumEntry 163 } uumVPNName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The VPN-Name. " ::= { uumEntry 164 } uumTrafficThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "traffic threshold based idle timeout" --CONFIGURABLE ::= { uumEntry 167 } uumTunnelAssignmentId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The name of the L2TP/PPTP tunnel that may be created for the user." --CONFIGURABLE ::= { uumEntry 168 } uumKeepAliveInterval OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The TCP Keep Alive Interval in seconds" DEFVAL { 0 } --CONFIGURABLE ::= { uumEntry 169 } usrUserManCfmFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the configuration file" ::= { usrUserManGroup 26 } usrUserManCfmSaveFlag OBJECT-TYPE SYNTAX INTEGER { normal(1), save(2), saving(3), load(4), loading(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The Configuration File Manager Flag for saving user management scalars" ::= { usrUserManGroup 27 } usrUserManRadiusPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The udp port the primary radius server listens at" --CONFIGURABLE ::= { usrUserManGroup 28 } usrUserManRadiusAltPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The udp port the alternate radius server listens at" --CONFIGURABLE ::= { usrUserManGroup 29 } usrUserManRadiusAltSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The shared secret between the alternate RADIUS server and pilgrim" --CONFIGURABLE ::= { usrUserManGroup 30 } -- User managers framed route table definition usrUserManFramedRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF UumFramedRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" --CONFIGURABLE ::= { usrUserManGroup 31 } uumFramedRouteEntry OBJECT-TYPE SYNTAX UumFramedRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { uumFramedRouteUserName, uumFramedRouteIpAddress } --CONFIGURABLE ::= { usrUserManFramedRouteTable 1 } UumFramedRouteEntry ::= SEQUENCE { uumFramedRouteUserName UsrUserName, uumFramedRouteIpAddress IpAddress, uumFramedRouteStatus INTEGER, uumFramedRouteIpMask IpAddress, uumFramedRouteIpGateway IpAddress, uumFramedRouteIpMetric INTEGER } uumFramedRouteUserName OBJECT-TYPE SYNTAX UsrUserName ACCESS read-only STATUS mandatory DESCRIPTION "The users name" --CONFIGURABLE ::= { uumFramedRouteEntry 1 } uumFramedRouteIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The framed routing ip address for the user" --CONFIGURABLE ::= { uumFramedRouteEntry 2 } uumFramedRouteStatus OBJECT-TYPE SYNTAX INTEGER { delete(1), add(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The status field for the framed route" ::= { uumFramedRouteEntry 3 } uumFramedRouteIpMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The framed routing ip mask for the user" --CONFIGURABLE ::= { uumFramedRouteEntry 4 } uumFramedRouteIpGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The framed routing ip gateway for the user" --CONFIGURABLE ::= { uumFramedRouteEntry 5 } uumFramedRouteIpMetric OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "The framed routing ip metric for the user" --CONFIGURABLE ::= { uumFramedRouteEntry 6 } usrUserManRadiusAcctSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The radius secret for the primary accounting server" --CONFIGURABLE ::= { usrUserManGroup 32 } usrUserManRadiusAcctAltSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The radius secret for the secondary accounting server" --CONFIGURABLE ::= { usrUserManGroup 33 } usrUserManRadiusAcctPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The radius port for the primary accounting server" --CONFIGURABLE ::= { usrUserManGroup 34 } usrUserManRadiusAcctAltPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The radius port for the secondary accounting server" --CONFIGURABLE ::= { usrUserManGroup 35 } usrRadiusBusyOutEnabled OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Is the Radius client regularly checking the contact time of the servers so that it can cause the modems to be busied out when the servers are unreachbale." --DEFVAL { 1 } --CONFIGURABLE ::= { usrUserManGroup 36 } usrRadiusHelloFrequency OBJECT-TYPE SYNTAX INTEGER(1..6000) ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds the system can go between messages from the RADIUS servers before it sends a Status-Server request to that server." DEFVAL { 60 } --CONFIGURABLE ::= { usrUserManGroup 37 } usrRadiusAuthState OBJECT-TYPE SYNTAX INTEGER { start(1), up(2), losingContact(3), down(4), gainingContact(5) } ACCESS read-only STATUS mandatory DESCRIPTION "If the system is tracking RADIUS servers for service loss busy-out, the state of those server." --DEFVAL { 1 } ::= { usrUserManGroup 38 } -- User managers assigned address pool table definition usrUserManAddrPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF UumAddrPoolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of address pools a user is configured for." --CONFIGURABLE ::= { usrUserManGroup 39 } uumAddrPoolEntry OBJECT-TYPE SYNTAX UumAddrPoolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of an address pool that a user is configured for." INDEX { uumAddrPoolUserName, uumAddrPoolName} --CONFIGURABLE ::= { usrUserManAddrPoolTable 1 } UumAddrPoolEntry ::= SEQUENCE { uumAddrPoolUserName UsrUserName, uumAddrPoolName DisplayString, uumAddrPoolStatus INTEGER } uumAddrPoolUserName OBJECT-TYPE SYNTAX UsrUserName ACCESS read-only STATUS mandatory DESCRIPTION "The users name" --CONFIGURABLE ::= { uumAddrPoolEntry 1 } uumAddrPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..16)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the address pool this user is configured for" --CONFIGURABLE ::= { uumAddrPoolEntry 2 } uumAddrPoolStatus OBJECT-TYPE SYNTAX INTEGER { delete(1), add(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If set to active(2) user is configured to use this pool. If set to delet(1) this pool should be deleted from user's address pool list" --CONFIGURABLE ::= { uumAddrPoolEntry 3 } usrRadiusAcctState OBJECT-TYPE SYNTAX INTEGER { start(1), up(2), losingContact(3), down(4), gainingContact(5) } ACCESS read-only STATUS mandatory DESCRIPTION "A debug value for debugging the service loss subsystem." ::= { usrUserManGroup 40 } usrRadiusAuthSecsMessage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A debug value for debugging the service loss subsystem." ::= { usrUserManGroup 41 } usrRadiusAcctSecsMessage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A debug value for debugging the service loss subsystem." ::= { usrUserManGroup 42 } usrRadiusAuthSecsState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A debug value for debugging the service loss subsystem." ::= { usrUserManGroup 43 } usrRadiusAcctSecsState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A debug value for debugging the service loss subsystem." ::= { usrUserManGroup 44 } usrUserManRadiusAuthNoResponse OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times radius fails to answer an authentication request" ::= { usrUserManGroup 45 } usrUserManActiveSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF UumActiveSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { usrUserManGroup 46 } uumActiveSessionEntry OBJECT-TYPE SYNTAX UumActiveSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { uumActiveSessionUserName, uumActiveSessionSessionId } ::= { usrUserManActiveSessionTable 1 } UumActiveSessionEntry ::= SEQUENCE { uumActiveSessionUserName UsrUserName, uumActiveSessionSessionId INTEGER, uumActiveSessionConnectionType INTEGER, uumActiveSessionProtocolType INTEGER, uumActiveSessionAction INTEGER, uumActiveSessionIfName OCTET STRING, uumActiveSessionIpAddress IpAddress, uumActiveSessionConnTime INTEGER, uumActiveSessionIdleTime INTEGER, uumActiveSessionId INTEGER, uumSessionUserName UsrUserName, uumActiveSessionInBytes INTEGER, uumActiveSessionOutBytes INTEGER, --uumActiveSessionIpAddress -- IpAddress, uumActiveSessionCallId OCTET STRING } uumActiveSessionUserName OBJECT-TYPE SYNTAX UsrUserName ACCESS read-only STATUS mandatory DESCRIPTION "The users name" ::= { uumActiveSessionEntry 1 } uumActiveSessionSessionId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The unique id for the active session" ::= { uumActiveSessionEntry 2 } uumActiveSessionConnectionType OBJECT-TYPE SYNTAX INTEGER { unknown(1), wan(2), lan(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The connection type for the active session" ::= { uumActiveSessionEntry 3 } uumActiveSessionProtocolType OBJECT-TYPE SYNTAX INTEGER { unknown(1), ppp(2), slip(3), arap(4), telnet(5), rlogin(6), cleartcp(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The protocol type for the active session" ::= { uumActiveSessionEntry 4 } uumActiveSessionAction OBJECT-TYPE SYNTAX INTEGER { disconnect(6) } ACCESS read-only STATUS mandatory DESCRIPTION "We need to be able to disconnect all users with a particular user name" ::= { uumActiveSessionEntry 5 } uumActiveSessionIfName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Interface Name" ::= { uumActiveSessionEntry 6 } uumActiveSessionIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Address of the session. This can be Remote PPP IP address in the case of a framed user or the login host ip address if the user type is login." ::= { uumActiveSessionEntry 7 } uumActiveSessionConnTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Session Connect Time" ::= { uumActiveSessionEntry 8 } uumActiveSessionIdleTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Session Idle Time" ::= { uumActiveSessionEntry 9 } uumActiveSessionId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "We need to display the sessionId" ::= { uumActiveSessionEntry 10 } uumSessionUserName OBJECT-TYPE SYNTAX UsrUserName ACCESS read-write STATUS mandatory DESCRIPTION "We need to display the username" ::= { uumActiveSessionEntry 11 } uumActiveSessionInBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Session Bytes Count - Input Bytes" ::= { uumActiveSessionEntry 12 } uumActiveSessionOutBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Session Bytes Count - Output Bytes" ::= { uumActiveSessionEntry 13 } uumActiveSessionCallId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Session Call ID" ::= { uumActiveSessionEntry 14 } usrUserManSlotSpanChanOffset OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-write STATUS mandatory DESCRIPTION "Offset to add to modem's reported slot/span/channel when reporting this information. Default value is 1 for all platforms except Positron which uses a default of 0." --CONFIGURABLE ::= { usrUserManGroup 47 } usrUserManHintAssigned OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Is the hint assigned feature enabled?" --CONFIGURABLE ::= { usrUserManGroup 48 } usrUserManAuthorEna OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Is remote authorization on or off" --CONFIGURABLE ::= { usrUserManGroup 49 } usrUserManTcpPacketsRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of TCP packets received" ::= { usrUserManGroup 50 } usrUserManTcpPacketsTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of TCP packets transmitted" ::= { usrUserManGroup 51 } -- AAA server table definition. A Direct-Request host name entry refers -- to one of the AAA servers in this table. usrUserManAAAServersTable OBJECT-TYPE SYNTAX SEQUENCE OF UumAAAServersEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { usrUserManGroup 52 } uumAAAServersEntry OBJECT-TYPE SYNTAX UumAAAServersEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { uumAAAServersName, uumAAAServersPref } ::= { usrUserManAAAServersTable 1 } UumAAAServersEntry ::= SEQUENCE { uumAAAServersName UsrUserName, uumAAAServersPref INTEGER, uumAAAServerIpAddress IpAddress, uumAAAServersSecret OCTET STRING, uumAAAServersPort INTEGER, uumAAAServersEncryption INTEGER, uumAAAServersState INTEGER, uumAAAServersHostName OCTET STRING, uumAAAServersPassThru INTEGER, uumAAAServersSourcePort INTEGER, uumAAAServersStatus INTEGER, uumAAAServersMirrorGroup INTEGER, uumAAAServersSelectionMask OCTET STRING, uumAAAServersAAAType INTEGER, uumAAAServersProtocol INTEGER, uumAAAServersTimeout INTEGER, uumAAAServersRetransmit INTEGER, uumAAAServersSuccessCount Counter, uumAAAServersFailureCount Counter, uumAAAServersNoResponseCount Counter, uumAAAServersContactInterval INTEGER, uumAAAServersOperationalStatus INTEGER } uumAAAServersName OBJECT-TYPE SYNTAX UsrUserName ACCESS read-only STATUS mandatory DESCRIPTION "Server name" --CONFIGURABLE ::= { uumAAAServersEntry 1 } uumAAAServersPref OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Server preference" --CONFIGURABLE ::= { uumAAAServersEntry 2 } uumAAAServerIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address for the server" --CONFIGURABLE ::= { uumAAAServersEntry 3 } uumAAAServersSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The shared secret between the AAA server and client" --CONFIGURABLE ::= { uumAAAServersEntry 4 } uumAAAServersPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The port the AAA server listens at" --CONFIGURABLE ::= { uumAAAServersEntry 5 } -- Reversed the definition and change to on/off instead of enable/disable -- which is consistent with similar difinition on other encryption setting WSFU 9/23/97 uumAAAServersEncryption OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Packet body encryption enabled or disabled. Disabling encryption works for TACACS+ clients only. The entire body will be sent as clear text. Obvious security concern." --CONFIGURABLE ::= { uumAAAServersEntry 6 } uumAAAServersState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Is the AAA server enable or disabled" --CONFIGURABLE ::= { uumAAAServersEntry 7 } uumAAAServersHostName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the AAA host to be resolved by DNS" --CONFIGURABLE ::= { uumAAAServersEntry 8 } uumAAAServersPassThru OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When enabled will allow users access to a domain even if they authentication fails. This object is used primarily with the direct request feature." --CONFIGURABLE ::= { uumAAAServersEntry 9 } uumAAAServersSourcePort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The source port the AAA server listens at" --CONFIGURABLE ::= { uumAAAServersEntry 10 } uumAAAServersStatus OBJECT-TYPE SYNTAX INTEGER { delete(1), inactive(2), active(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The status field for delete -- LEAVE THIS AS LAST OBJECT IN TABLE" --CONFIGURABLE ::= { uumAAAServersEntry 11 } uumAAAServersMirrorGroup OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Mirror Group for this server" --CONFIGURABLE ::= { uumAAAServersEntry 12 } uumAAAServersSelectionMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "The Selection mask for Server selection" --CONFIGURABLE ::= { uumAAAServersEntry 13 } uumAAAServersAAAType OBJECT-TYPE SYNTAX INTEGER { auth(1), acco(2) } ACCESS read-write STATUS mandatory DESCRIPTION "AAA Server type. Can be Authentication/Accounting" --CONFIGURABLE ::= { uumAAAServersEntry 14 } uumAAAServersProtocol OBJECT-TYPE SYNTAX INTEGER { tacacsplus(1), radius(2) } ACCESS read-write STATUS mandatory DESCRIPTION "AAA Server Protocol. For now can be TACACS+ or RADIUS" --CONFIGURABLE ::= { uumAAAServersEntry 15 } uumAAAServersTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Timeout value for trying this server. Exceeding the time setting will lead to trying for the next server in the table " --CONFIGURABLE ::= { uumAAAServersEntry 16 } uumAAAServersRetransmit OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION " The retry count or retransmission count for this server in the table " --CONFIGURABLE ::= { uumAAAServersEntry 17 } uumAAAServersSuccessCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times radius fails to answer an authentication request" ::= { uumAAAServersEntry 18 } uumAAAServersFailureCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times radius fails to answer an authentication request" ::= { uumAAAServersEntry 19 } uumAAAServersNoResponseCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times there was a no response from the server for a AAA request " ::= { uumAAAServersEntry 20 } uumAAAServersContactInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds since the authentication server was last contacted." DEFVAL { -1 } ::= { uumAAAServersEntry 21 } uumAAAServersOperationalStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION " Operational Status of Server during AUTH/ACCO " ----DEFVAL { 1 } ::= { uumAAAServersEntry 22 } usrUserManDirectRequestStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Is direct request on or off" --CONFIGURABLE ::= { usrUserManGroup 53 } usrUserManDirectRequestDelimiter OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "The delimiter string for the direct request service" --CONFIGURABLE ::= { usrUserManGroup 54 } usrUserManDirectRequestTimeout OBJECT-TYPE SYNTAX INTEGER (0..30) ACCESS read-write STATUS mandatory DESCRIPTION "Timeout feature for the direct request service" --CONFIGURABLE ::= { usrUserManGroup 55 } usrUserManRadiusVSA OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Vendor Specific Attribute for the compatibility of Sprint CISCO Server" --CONFIGURABLE ::= { usrUserManGroup 56 } usrUserManRadiusAcctVSA OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Vendor Specific Attribute for the compatibility of Sprint CISCO Server" --CONFIGURABLE ::= { usrUserManGroup 57 } --###===========AAA Domain Table=========== -- AAA Domain table definition. -- usrUserManAAADomainTable OBJECT-TYPE SYNTAX SEQUENCE OF UumAAADomainEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { usrUserManGroup 67 } uumAAADomainEntry OBJECT-TYPE SYNTAX UumAAADomainEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { uumAAADomainName, uumAAADomainAAAType } ::= { usrUserManAAADomainTable 1 } UumAAADomainEntry ::= SEQUENCE { uumAAADomainName UsrUserName, uumAAADomainAAAType INTEGER, uumAAADomainServersUnavail OCTET STRING, uumAAADomainSearchAlg INTEGER, uumAAADomainDNSIpRotation INTEGER, uumAAADomainInterimAccountingInterval INTEGER, uumAAADomainMirroring INTEGER, uumAAADomainState INTEGER, uumAAADomainStatus INTEGER } uumAAADomainName OBJECT-TYPE SYNTAX UsrUserName ACCESS read-only STATUS mandatory DESCRIPTION "The name of the AAA domain " --CONFIGURABLE ::= { uumAAADomainEntry 1 } uumAAADomainAAAType OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS read-only STATUS mandatory DESCRIPTION "AAA Server type. Can be Authorizing/Accounting/AAA" --CONFIGURABLE ::= { uumAAADomainEntry 2 } uumAAADomainServersUnavail OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "Behaviour if servers are unavailable" --CONFIGURABLE ::= { uumAAADomainEntry 3 } uumAAADomainSearchAlg OBJECT-TYPE SYNTAX INTEGER { fall-Through(1), round-Robin(2), active-server(3), preferred(4), load-balancing(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Domain Server Search Algorithm" --CONFIGURABLE ::= { uumAAADomainEntry 4 } uumAAADomainDNSIpRotation OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Should this domain be looked up using DNS ? " --CONFIGURABLE ::= { uumAAADomainEntry 5 } uumAAADomainInterimAccountingInterval OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Checkpoint Interval for looking up this domain. Exceeding the time setting will lead to trying for the next domain in the table " --CONFIGURABLE ::= { uumAAADomainEntry 6 } uumAAADomainMirroring OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Should this Domain info. be mirrored ? " --CONFIGURABLE ::= { uumAAADomainEntry 7 } uumAAADomainState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Is this domain enabled to be used ? " --CONFIGURABLE ::= { uumAAADomainEntry 8 } uumAAADomainStatus OBJECT-TYPE SYNTAX INTEGER { delete(1), inactive(2), active(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Is this domain added or deleted. Leave this last in the table" --CONFIGURABLE ::= { uumAAADomainEntry 9 } -- Global default parameters for Domain Information. Also includes -- DIRECT_REQUEST Settings uumAAAGlobalSelectionMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) ACCESS read-write STATUS mandatory DESCRIPTION "The Selection mask for Server selection" --CONFIGURABLE ::= { usrUserManGroup 68 } uumAAAGlobalServersUnavail OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..240)) ACCESS read-write STATUS mandatory DESCRIPTION "Behaviour if servers are unavailable. Action can be DENY, PERMIT or " --CONFIGURABLE ::= { usrUserManGroup 69 } uumAAAGlobalSearchAlg OBJECT-TYPE SYNTAX INTEGER { fall-Through(1), round-Robin(2), active-server(3), prefered(4), load-Balancing(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Domain Server Search Algorithm" --CONFIGURABLE ::= { usrUserManGroup 70 } uumAAAGlobalDNSIpRotation OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Should this domain be looked up using DNS ? " --CONFIGURABLE ::= { usrUserManGroup 71 } uumAAAGlobalMirroring OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Should this Domain info. be mirrored ? " --CONFIGURABLE ::= { usrUserManGroup 73 } uumAAAGlobalRealmPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The password for the user send to RADIUS realm directed req case" --CONFIGURABLE ::= { usrUserManGroup 229 } -- Pilgrim20 has elements defined in the range through 57 and -- 90 through 91. usrUserManReportedPortDensity OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-write STATUS mandatory DESCRIPTION "Used as slot multiplier for modem slot when reporting RADIUS NAS-PORT attribute. The reported NAS-PORT attribute for a call is computed as: * usrUserManReportedPortDensity + + usrUserManSlotSpanChanOffset This can be used to achieve a dense NAS-PORT # mapping for a chassis with uniform modem port density. Note that it is possible to configure this attribute such that eroneous aliasing of NAS-PORT #s are generated if the ReportPortDensity is set < the systems true port density. Default value is 256." --CONFIGURABLE ::= { usrUserManGroup 90 } usrUserManFillNullAttributes OBJECT-TYPE SYNTAX INTEGER { disabled(2), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the switch to enable/disable Filling of Null Attributes in Radius Accounting records" --CONFIGURABLE ::= { usrUserManGroup 91 } -- Radius enhancements for UUNET follow -- The source port for the authentication servers usrUserManRadiusSrcPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The source udp port the primary radius server binds to" --CONFIGURABLE ::= { usrUserManGroup 92 } -- The source port for the accounting servers usrUserManRadiusAcctSrcPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The source radius port for the primary accounting server" --CONFIGURABLE ::= { usrUserManGroup 93 } -- The tertiary authentication server details usrUserManRadiusTertiaryIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The tertiary IP address of the RADIUS server" --CONFIGURABLE ::= { usrUserManGroup 94 } usrUserManRadiusTertiarySecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The radius secret for the tertiary server" --CONFIGURABLE ::= { usrUserManGroup 95 } usrUserManRadiusTertiaryPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The udp port the tertiary radius server listens at" --CONFIGURABLE ::= { usrUserManGroup 96 } -- The algorithm for authentication usrRadiusAuthAlgorithm OBJECT-TYPE SYNTAX INTEGER { fallthrough(1), roundrobin(2), activeserver(3), prefered(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Takes either the Fall-through or Round-robin algorithm for re-tries" --CONFIGURABLE ::= { usrUserManGroup 97 } -- The USR or UUNET style for attribute values usrRadiusAttributeStyle OBJECT-TYPE SYNTAX INTEGER { standard(1), ascend(2), mci(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Takes STANDARD or ASCEND style for attribute values" --CONFIGURABLE ::= { usrUserManGroup 98 } -- The Interim accounting interval for checkpoint accounting usrRadiusInterimAccountingIntervalEnabled OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Whether checkpoint accounting is enabled" DEFVAL { 1 } --CONFIGURABLE ::= { usrUserManGroup 99 } usrRadiusInterimAccountingInterval OBJECT-TYPE SYNTAX INTEGER (5..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The time intervals when acct. info is sent to the servers" --CONFIGURABLE ::= { usrUserManGroup 100 } -- Primary server accounting status usrUserManPrimAcctStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Is priamary accounting on or off" --CONFIGURABLE ::= { usrUserManGroup 101 } -- Secondary server accounting status usrUserManSecAcctStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Is secondary accounting on or off" --CONFIGURABLE ::= { usrUserManGroup 102 } usrUserManRadiusAcctFirstBackupIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the Primary RADIUS First backup accounting server" --CONFIGURABLE ::= { usrUserManGroup 103 } usrUserManRadiusAcctSecondBackupIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the Primary RADIUS Second backup accounting server" --CONFIGURABLE ::= { usrUserManGroup 104 } usrUserManRadiusAcctAltFirstBackupIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the Secondary RADIUS First backup accounting server" --CONFIGURABLE ::= { usrUserManGroup 105 } usrUserManRadiusAcctAltSecondBackupIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the Secondary RADIUS Second backup accounting server" --CONFIGURABLE ::= { usrUserManGroup 106 } usrUserManRadiusAcctFirstBackupSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The radius secret for the primary first backup accounting server" --CONFIGURABLE ::= { usrUserManGroup 107 } usrUserManRadiusAcctSecondBackupSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The radius secret for the primary second backup accounting server" --CONFIGURABLE ::= { usrUserManGroup 108 } usrUserManRadiusAcctAltFirstBackupSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The radius secret for the secondary first backup accounting server" --CONFIGURABLE ::= { usrUserManGroup 109 } usrUserManRadiusAcctAltSecondBackupSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The radius secret for the secondary second backup accounting server" --CONFIGURABLE ::= { usrUserManGroup 110 } usrUserManRadiusAcctFirstBackupPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The radius port for the primary first backup accounting server" --CONFIGURABLE ::= { usrUserManGroup 111 } usrUserManRadiusAcctSecondBackupPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The radius port for the primary second backup accounting server" --CONFIGURABLE ::= { usrUserManGroup 112 } usrUserManRadiusAcctAltFirstBackupPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The radius port for the secondary first backup accounting server" --CONFIGURABLE ::= { usrUserManGroup 113 } usrUserManRadiusAcctAltSecondBackupPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The radius port for the secondary second backup accounting server" --CONFIGURABLE ::= { usrUserManGroup 114 } usrUserManRadiusAcctRoundRobinCount OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the servers are switched in the primary server group" ::= { usrUserManGroup 115 } usrUserManRadiusAcctAltRoundRobinCount OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the servers are switched in the secondary server group" ::= { usrUserManGroup 116 } usrUserManRadiusAcctPacketDiscardCount OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets discarded in the primary server group" ::= { usrUserManGroup 117 } usrUserManRadiusAcctAltPacketDiscardCount OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets discarded in the secondary server group" ::= { usrUserManGroup 118 } usrUserManRadiusAcctQueuePercentFull OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "Percentage of the queue filled in the primary server group" ::= { usrUserManGroup 119 } usrUserManRadiusAcctAltQueuePercentFull OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "Percentage of the queue filled in the secondary server group" ::= { usrUserManGroup 120 } usrUserManRadiusAcctOutstandingPacketCount OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets outstanding in the primary server group" ::= { usrUserManGroup 121 } usrUserManRadiusAcctAltOutstandingPacketCount OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets outstanding in the primary server group" ::= { usrUserManGroup 122 } usrTacacsAcctAttrList OBJECT-TYPE SYNTAX INTEGER { all(1), simple(2), sprint(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the tacacs+ accounting attribute lists requested from different customer like SPRINT ...." --DEFVAL { 2 } --CONFIGURABLE ::= { usrUserManGroup 123 } usrUserManAcctAltRetrans OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of times a timeout will occur for a secondary server when communicating with radius accounting server" --CONFIGURABLE ::= { usrUserManGroup 124 } usrUserManLogUnauthenticatedCalls OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "If set to true(1), all unauthenticated calls will generate a Stop Accounting-Request. If set to false(2), no Stop Accounting-Requests will be sent." --DEFVAL { true } --CONFIGURABLE ::= { usrUserManGroup 125 } usrUserManRadiusActiveAuthIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the Active RADIUS Authentication Server" --CONFIGURABLE ::= { usrUserManGroup 126 } usrUserManRadiusActiveAcctIPFirst OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the Active RADIUS Accounting Server of First Group" --CONFIGURABLE ::= { usrUserManGroup 127 } usrUserManRadiusActiveAcctIPSecond OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the Active RADIUS Accounting Server of Second Group" --CONFIGURABLE ::= { usrUserManGroup 128 } usrUserManRadiusFirstBackupAuthSuccesses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of first backup radius server authentication successes" ::= { usrUserManGroup 129 } usrUserManRadiusFirstBackupAuthFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of first backup radius server authentication failures" ::= { usrUserManGroup 130 } usrUserManRadiusSecondBackupAuthSuccesses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of secondary backup radius server authentication successes" ::= { usrUserManGroup 131 } usrUserManRadiusSecondBackupAuthFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of secondary backup radius server authentication failures" ::= { usrUserManGroup 132 } usrUserManRadiusFirstBackupAuthNoResponse OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times first backup radius server fails to answer an authentication request" ::= { usrUserManGroup 133 } usrUserManRadiusSecondBackupAuthNoResponse OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times secondary backup radius server fails to answer an authentication request" ::= { usrUserManGroup 134 } usrUserManRadiusCounterResetTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (12)) ACCESS read-only STATUS mandatory DESCRIPTION "Daily time we reset all the authentication counter contains to value zero" --CONFIGURABLE ::= { usrUserManGroup 135 } usrUserManRadiusResetAuthCountersToZero OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An user action to reset all the authentication counter contains to value zero" --CONFIGURABLE ::= { usrUserManGroup 136 } usrUserManRadiusAcctCounterResetTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (12)) ACCESS read-only STATUS mandatory DESCRIPTION "Daily time we reset all the accounting counter contains to value zero" --CONFIGURABLE ::= { usrUserManGroup 137 } usrUserManRadiusResetAcctCountersToZero OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An user action to reset all the accounting counter contains to value zero" --CONFIGURABLE ::= { usrUserManGroup 138 } -- The usrUserManVTSTermTable is used to terminate a session using -- the unique index key made up of usrUserManVTSTermUserName, -- usrUserManVTSTermSessionId, usrUserManVTSTermDynamicIpAddress, -- and usrUserManVTSTermSessionKey. usrUserManVTSTermTable OBJECT-TYPE SYNTAX SEQUENCE OF UsrUserManVTSTermEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { usrUserManGroup 139 } usrUserManVTSTermEntry OBJECT-TYPE SYNTAX UsrUserManVTSTermEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { usrUserManVTSTermUserName, usrUserManVTSTermSessionId, usrUserManVTSTermDynamicIpAddress, usrUserManVTSTermSessionKey } ::= { usrUserManVTSTermTable 1 } UsrUserManVTSTermEntry ::= SEQUENCE { usrUserManVTSTermUserName UsrUserName, usrUserManVTSTermSessionId OCTET STRING, usrUserManVTSTermDynamicIpAddress IpAddress, usrUserManVTSTermSessionKey OCTET STRING, usrUserManVTSTermAction INTEGER } usrUserManVTSTermUserName OBJECT-TYPE SYNTAX UsrUserName ACCESS read-only STATUS mandatory DESCRIPTION "The users name" ::= { usrUserManVTSTermEntry 1 } usrUserManVTSTermSessionId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The unique id for the active session" ::= { usrUserManVTSTermEntry 2 } usrUserManVTSTermDynamicIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The dynamic IP address for the active session" ::= { usrUserManVTSTermEntry 3 } usrUserManVTSTermSessionKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) ACCESS read-only STATUS mandatory DESCRIPTION "A unique key to identify the active session" ::= { usrUserManVTSTermEntry 4 } usrUserManVTSTermAction OBJECT-TYPE SYNTAX INTEGER { disconnectSession(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The action to perform on the active session." ::= { usrUserManVTSTermEntry 5 } -- The usrUserManVTSVerifyTable is used to determin if a session -- is still active. usrUserManVTSVerifyTable OBJECT-TYPE SYNTAX SEQUENCE OF UsrUserManVTSVerifyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { usrUserManGroup 140 } usrUserManVTSVerifyEntry OBJECT-TYPE SYNTAX UsrUserManVTSVerifyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { usrUserManVTSVerifySessionId } ::= { usrUserManVTSVerifyTable 1 } UsrUserManVTSVerifyEntry ::= SEQUENCE { usrUserManVTSVerifySessionId OCTET STRING, usrUserManVTSVerifyUserName UsrUserName } usrUserManVTSVerifySessionId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The unique id for the active session" ::= { usrUserManVTSVerifyEntry 1 } usrUserManVTSVerifyUserName OBJECT-TYPE SYNTAX UsrUserName ACCESS read-only STATUS mandatory DESCRIPTION "The users name" ::= { usrUserManVTSVerifyEntry 2 } usrUserManMaxLocalUsers OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum Local users that may be supported on the card" DEFVAL { 450 } --CONFIGURABLE ::= { usrUserManGroup 141 } -- Following MIB Objects are added for Resource Management Feature. usrUserManRadiusSrcPortAuth OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This flag state whether to use check the response radius source port same at that configured in the system. The default value is TRUE" --CONFIGURABLE ::= { usrUserManGroup 142 } usrUserManRadiusUseRadUsername OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This flag states whether to use the radius supplied username in the access-accept packet to override the username in the request packet. The default value is FALSE." --CONFIGURABLE ::= { usrUserManGroup 143 } usrResourceMgmtState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether the Resource Management is enabled or disabled." DEFVAL { disabled } --CONFIGURABLE ::= { usrUserManGroup 144 } usrResourceMgmtQueriesReceivedPrimary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Resource Management Queries received from the Primary server." DEFVAL { 0 } ::= { usrUserManGroup 145 } usrResourceMgmtQueryResponsesPrimary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Resource Management Query Responses sent to the Primary server." DEFVAL { 0 } ::= { usrUserManGroup 146 } usrResourceMgmtReclaimsReceivedPrimary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Resource Management Reclaims received from the Primary server." DEFVAL { 0 } ::= { usrUserManGroup 147 } usrResourceMgmtFreeSendPrimary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of successful Resource Management Frees sent to the Primary server." DEFVAL { 0 } ::= { usrUserManGroup 148 } usrResourceMgmtFreeRexmitPrimary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Resource Management Frees retransmitted to the Primary server." DEFVAL { 0 } ::= { usrUserManGroup 149 } usrResourceMgmtQueriesReceivedSecondary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Resource Management Queries received from the Secondary server." DEFVAL { 0 } ::= { usrUserManGroup 150 } usrResourceMgmtQueryResponsesSecondary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Resource Management Query Responses sent to the Secondary server." DEFVAL { 0 } ::= { usrUserManGroup 151 } usrResourceMgmtReclaimsReceivedSecondary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Resource Management Reclaims received from the Secondary server." DEFVAL { 0 } ::= { usrUserManGroup 152 } usrResourceMgmtFreeSendSecondary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of successful Resource Management Frees sent to the Secondary server." DEFVAL { 0 } ::= { usrUserManGroup 153 } usrResourceMgmtFreeRexmitSecondary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Resource Management Frees retransmitted to the Secondary server." DEFVAL { 0 } ::= { usrUserManGroup 154 } usrResourceMgmtQueriesReceivedTertiary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Resource Management Queries received from the Tertiary server." DEFVAL { 0 } ::= { usrUserManGroup 155 } usrResourceMgmtQueryResponsesTertiary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Resource Management Query Responses sent to the Tertiary server." DEFVAL { 0 } ::= { usrUserManGroup 156 } usrResourceMgmtReclaimsReceivedTertiary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Resource Management Reclaims received from the Tertiary server." DEFVAL { 0 } ::= { usrUserManGroup 157 } usrResourceMgmtFreeSendTertiary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of successful Resource Management Frees sent to the Tertiary server." DEFVAL { 0 } ::= { usrUserManGroup 158 } usrResourceMgmtFreeRexmitTertiary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Resource Management Frees retransmitted to the Tertiary server." DEFVAL { 0 } ::= { usrUserManGroup 159 } usrResetResourceMgmtCountersToZero OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An user action to reset all the resource management counters to zero" ::= { usrUserManGroup 161 } usrResetResourceMgmtCountersResetTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (12)) ACCESS read-only STATUS mandatory DESCRIPTION "Time the resource management counters were last reset to value zero." ::= { usrUserManGroup 162 } usrRadiusAccountingAttributeStyle OBJECT-TYPE SYNTAX INTEGER { standard(1), netserver(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Takes STANDARD or Netserver style for accounting attribute values" --CONFIGURABLE ::= { usrUserManGroup 160 } usrRadiusSendAcctUnauthRecord OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Whether the Sending unauthenticated STOP records is enabled or disabled." --CONFIGURABLE ::= { usrUserManGroup 165 } -- Accounting Counters for UUNET usrUserManRadiusAcctPrimaryServerGroupCounterResetTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (12)) ACCESS read-write STATUS mandatory DESCRIPTION "Daily time we reset all the accounting counters for primary group to value zero" --CONFIGURABLE ::= { usrUserManGroup 163 } usrUserManRadiusAcctSecondaryServerGroupCounterResetTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (12)) ACCESS read-write STATUS mandatory DESCRIPTION "Daily time we reset all the accounting counters for secondary group to value zero" --CONFIGURABLE ::= { usrUserManGroup 164 } usrUserManRadiusDefaultUserAcct OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Whether to send accounting records for default users" --CONFIGURABLE ::= { usrUserManGroup 166 } usrUserManTunnelAuthenName OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This option is used for l2tp tunnel authentication. Default/Disabled -- System Transmit Authentication Name Enabled -- Used domain name or tunnel name " --CONFIGURABLE ::= { usrUserManGroup 167 } usrPrimaryAuthContactInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds since the Primary Radius authentication server was last contacted." DEFVAL { -1 } ::= { usrUserManGroup 168 } usrSecondaryAuthContactInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds since the Secondary Radius authentication server was last contacted." DEFVAL { -1 } ::= { usrUserManGroup 169 } usrTertiaryAuthContactInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds since the Tertiary Radius authentication server was last contacted." DEFVAL { -1 } ::= { usrUserManGroup 170 } usrAcctGrp1PriContactInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds since the Group 1 Primary Accounting server was last contacted." DEFVAL { -1 } ::= { usrUserManGroup 171 } usrAcctGrp1FrstBkpContactInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds since the Group 1 First backup accounting server was last contacted." DEFVAL { -1 } ::= { usrUserManGroup 172 } usrAcctGrp1SecBkpContactInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds since the Group 1 Second Backup Accounting server was last contacted." DEFVAL { -1 } ::= { usrUserManGroup 173 } usrAcctGrp2PriContactInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds since the Group 2 Primary Accounting server was last contacted." DEFVAL { -1 } ::= { usrUserManGroup 174 } usrAcctGrp2FrstBkpContactInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds since the Group 2 First backup accounting server was last contacted." DEFVAL { -1 } ::= { usrUserManGroup 175 } usrAcctGrp2SecBkpContactInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds since the Group 2 Second backup accounting server was last contacted." DEFVAL { -1 } ::= { usrUserManGroup 176 } usrUserManSyslogFormat OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Syslog message Format. Specifies which syslog style format is in effect out of the possible range of selections." --CONFIGURABLE ::= { usrUserManGroup 177 } usrUserManIPOnlyForPrimaryLink OBJECT-TYPE SYNTAX INTEGER { disabled(2), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the switch to enable/disable sending 0.0.0.0 ip address for any non primary link in the accounting records. " --CONFIGURABLE ::= { usrUserManGroup 178 } usrRadiusAccountingPrioritiseFirstServer OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This switch is to enable/disable prioritisation of the first server in each server group" --CONFIGURABLE ::= { usrUserManGroup 179 } usrUserManOnlySTOPforFailedService OBJECT-TYPE SYNTAX INTEGER { disabled(2), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "After successful authentication, if the required service start for the user fails, just send acct STOP" --CONFIGURABLE ::= { usrUserManGroup 180 } usrRadiusSendAcctAuthServiceType OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Whether the Sending of service type in auth-request enabled or disabled." --CONFIGURABLE ::= { usrUserManGroup 181 } usrRadiusAuthStatusPollInitInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Initial Interval for Auth Status Polling" --CONFIGURABLE ::= { usrUserManGroup 182 } usrRadiusAuthStatusPollMaxInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Maximum Interval for Auth Status Polling" --CONFIGURABLE ::= { usrUserManGroup 183 } usrRadiusAuthStatusPollIncInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interval increment for Auth Status Polling" --CONFIGURABLE ::= { usrUserManGroup 184 } usrRadiusAuthStatusServerUpRetry OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of status server tries before making the server from down to up" --CONFIGURABLE ::= { usrUserManGroup 185 } usrRadiusAuthStatusServerDownRetry OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of status server retries before making the server from up to down" --CONFIGURABLE ::= { usrUserManGroup 186 } usrRadiusAuthStatusPrimServer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status of the primary server " ::= { usrUserManGroup 187 } usrRadiusAuthStatusSecServer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status of the secondary server " ::= { usrUserManGroup 188 } usrRadiusAuthStatusTerServer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status of the tertiary server " ::= { usrUserManGroup 189 } usrRadiusDNISAuthServiceType OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The service type set fot DNIS authenticaton request. Default is 10" --CONFIGURABLE ::= { usrUserManGroup 190 } usrRadiusVTPAccountingFlag OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Flag which decides whether to send acct records for VTP tunnel users or not" --CONFIGURABLE ::= { usrUserManGroup 194 } uumAAAGlobalOpStatusRenewIntvl OBJECT-TYPE SYNTAX INTEGER (0..65536) ACCESS read-write STATUS mandatory DESCRIPTION " Time to reenable operationally down servers" --CONFIGURABLE ::= { usrUserManGroup 199 } uumAAAGlobalTotalRetransmit OBJECT-TYPE SYNTAX INTEGER (0..60) ACCESS read-write STATUS mandatory DESCRIPTION "Total Retransmit, same as RadiusOthers.radius_retrans" --CONFIGURABLE ::= { usrUserManGroup 200 } usrPortIdStyle OBJECT-TYPE SYNTAX INTEGER { contiguous(1), density-based(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Port Id generation style. The value of 1 means that the port id will be computed based on the density of ports. The value 2 means the lowest port id will be given from a contiguous space" --DEFVAL { 1 } --CONFIGURABLE ::= { usrUserManGroup 201 } usrResourceReclaimStyle OBJECT-TYPE SYNTAX INTEGER { draft-style(1), mci-style(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether resource reclaim is done in MCI style or the IETF draft style. Default is DRAFT style" --DEFVAL { 1 } --CONFIGURABLE ::= { usrUserManGroup 202 } usrAuthSyslogState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value states whether the Authentication information is sent in the syslogs." --DEFVAL { 2 } --CONFIGURABLE ::= { usrUserManGroup 203 } usrAcctSyslogState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value states whether the Accounting information is sent in the syslogs." --DEFVAL { 2 } --CONFIGURABLE ::= { usrUserManGroup 204 } usrAuthSyslogReset OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value states whether or not the authentication counters will be reset at a configured interval." --DEFVAL { 2 } --CONFIGURABLE ::= { usrUserManGroup 205 } usrAcctSyslogReset OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value states whether or not the accounting counters will be reset at a configured interval." --DEFVAL { 2 } --CONFIGURABLE ::= { usrUserManGroup 206 } usrAuthSyslogFrequency OBJECT-TYPE SYNTAX INTEGER { one-hour(99), six-hours(1), twelve-hours(2), twentyfour-hours(3), five-days(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the time interval after which the authentication counters will be reset to zero." --DEFVAL { 2 } --CONFIGURABLE ::= { usrUserManGroup 207 } usrAcctSyslogFrequency OBJECT-TYPE SYNTAX INTEGER { one-hour(99), six-hours(1), twelve-hours(2), twentyfour-hours(3), five-days(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the time interval after which the accounting counters will be reset to zero." --DEFVAL { 2 } --CONFIGURABLE ::= { usrUserManGroup 208 } usrUserManRadiusPrimaryPref OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS read-write STATUS mandatory DESCRIPTION "Primary Auth Server preference value when using PREFERED algorithm" --CONFIGURABLE ::= { usrUserManGroup 209 } usrUserManRadiusSecondaryPref OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS read-write STATUS mandatory DESCRIPTION "Secondary Auth Server preference value when using PREFERED algorithm" --CONFIGURABLE ::= { usrUserManGroup 210 } usrUserManRadiusTertiaryPref OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS read-write STATUS mandatory DESCRIPTION "Tertiary Auth Server preference value when using PREFERED algorithm" --CONFIGURABLE ::= { usrUserManGroup 211 } usrUserManPerServerRetryCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Per Server Retry Count when using PREFERED algorithm" --CONFIGURABLE ::= { usrUserManGroup 212 } usrUserManPerAcctServerRetryCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Per Server Retry Count for Acct Servers" --CONFIGURABLE ::= { usrUserManGroup 213 } usrUserManRadiusAcctCDRState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether to send Call Detail Record in ACCT Stop req." --CONFIGURABLE ::= { usrUserManGroup 214 } usrUserManRadiusAcctAggregateRoundRobinCount OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The total number of times the servers are switched in the primary and secondary server group" ::= { usrUserManGroup 215 } usrUserManRadiusAcctAggregatePacketDiscardCount OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets discarded in the primary and secondary server group" ::= { usrUserManGroup 216 } usrUserManRadiusAcctAverageQueuePercentFull OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The average of percentage of the queue filled in the primary and secondary server group" ::= { usrUserManGroup 217 } usrUserManRadiusAcctAggregateOutstandingPacketCount OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets outstanding in the primary and secondary server group" ::= { usrUserManGroup 218 } uumPrioratizeAuthServer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "In Round Robin Feature, Try the first auth server initially" --CONFIGURABLE ::= { usrUserManGroup 219 } usrResourceFreeForTunnelInitiator OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "For a tunneled call(l2tp/pptp) user get authenticated at both call initiator and call terminator thus uses 2 resources. If enabled resources at the initiator is freed immediatly after authentication else only when user goes away." DEFVAL { enabled } --CONFIGURABLE ::= { usrUserManGroup 220 } usrRebootIndicationStyle OBJECT-TYPE SYNTAX INTEGER { fall-through(1), preferred-server(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether reboot indiaction is sent in fall-through fashion or in round-robin manner according to server preference. Default is fall-through style" --DEFVAL { 1 } --CONFIGURABLE ::= { usrUserManGroup 222 } usrUserManRadiusAcctPrimaryPref OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS read-write STATUS mandatory DESCRIPTION "Primary Acct Server preference value" --CONFIGURABLE ::= { usrUserManGroup 223 } usrUserManRadiusAcctSecondaryPref OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS read-write STATUS mandatory DESCRIPTION "Secondary Acct Server preference value" --CONFIGURABLE ::= { usrUserManGroup 224 } usrUserManRadiusAcctBackupPrimaryFirstPref OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS read-write STATUS mandatory DESCRIPTION "Acct Server preference value" --CONFIGURABLE ::= { usrUserManGroup 225 } usrUserManRadiusAcctBackupPrimarySecondPref OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS read-write STATUS mandatory DESCRIPTION "Acct Server preference value" --CONFIGURABLE ::= { usrUserManGroup 226 } usrUserManRadiusAcctBackupSecondaryFirstPref OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS read-write STATUS mandatory DESCRIPTION "Acct Server preference value" --CONFIGURABLE ::= { usrUserManGroup 227 } usrUserManRadiusAcctBackupSecondarySecondPref OBJECT-TYPE SYNTAX INTEGER (1..3) ACCESS read-write STATUS mandatory DESCRIPTION "Acct Server preference value" --CONFIGURABLE ::= { usrUserManGroup 228 } -- User managers NAI construction table definition usrUserManNAIConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF UumNAIConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table for configuring NAI construction in case there is no authentication." ::= { usrUserManGroup 232 } uumNAIConfigEntry OBJECT-TYPE SYNTAX UumNAIConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the NAI construction table." INDEX { uumNAIIndex } ::= { usrUserManNAIConfigTable 1 } UumNAIConfigEntry ::= SEQUENCE { uumNAIIndex INTEGER, uumNAIMSIDType INTEGER, uumNAIMSIDRangeMin INTEGER, uumNAIMSIDRangeMax INTEGER, uumNAIRealm DisplayString, uumNAIStatus RowStatus } uumNAIIndex OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-only STATUS mandatory DESCRIPTION "The index of the NAI construction table, it can support up 100 entries." ::= { uumNAIConfigEntry 1 } uumNAIMSIDType OBJECT-TYPE SYNTAX INTEGER { imsi(1), min(2), irm(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of the MSID" --CONFIGURABLE ::= { uumNAIConfigEntry 2 } uumNAIMSIDRangeMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The lower bound of the MSID range" --CONFIGURABLE ::= { uumNAIConfigEntry 3 } uumNAIMSIDRangeMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The upper bound of the MSID range" --CONFIGURABLE ::= { uumNAIConfigEntry 4 } uumNAIRealm OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The realm of the MSID in the range specified" --CONFIGURABLE ::= { uumNAIConfigEntry 5 } uumNAIStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to add, modify, and delete rows for the NAI construction table." --CONFIGURABLE ::= { uumNAIConfigEntry 6 } -- User managers TOD table definition usrUserManTODConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF UumTODConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table for configuring Time Of Day Timer." ::= { usrUserManGroup 233 } uumTODConfigEntry OBJECT-TYPE SYNTAX UumTODConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the TOD table." INDEX { uumTODIndex } ::= { usrUserManTODConfigTable 1 } UumTODConfigEntry ::= SEQUENCE { uumTODIndex INTEGER, uumTODHour INTEGER, uumTODMinute INTEGER, uumTODSecond INTEGER, uumTODStatus RowStatus } uumTODIndex OBJECT-TYPE SYNTAX INTEGER (1..5) ACCESS read-only STATUS mandatory DESCRIPTION "The index of the TOD table, it can support up 5 entries." ::= { uumTODConfigEntry 1 } uumTODHour OBJECT-TYPE SYNTAX INTEGER (0..23) ACCESS read-write STATUS mandatory DESCRIPTION "The hour of the TOD timer, it is a 24 hour clock." --CONFIGURABLE ::= { uumTODConfigEntry 2 } uumTODMinute OBJECT-TYPE SYNTAX INTEGER (0..59) ACCESS read-write STATUS mandatory DESCRIPTION "The minute of the TOD timer." --CONFIGURABLE ::= { uumTODConfigEntry 3 } uumTODSecond OBJECT-TYPE SYNTAX INTEGER (0..59) ACCESS read-write STATUS mandatory DESCRIPTION "The second of the TOD timer." --CONFIGURABLE ::= { uumTODConfigEntry 4 } uumTODStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to add and delete rows from the TOD table." --CONFIGURABLE ::= { uumTODConfigEntry 5 } usrUserManTODTimerEnabled OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Whether TOD timer accounting is enabled" DEFVAL { 1 } --CONFIGURABLE ::= { usrUserManGroup 235 } usrUserManActiveStopTriggerEnabled OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Whether Active Stop Airlink Record triggered accounting is enabled" DEFVAL { 2 } --CONFIGURABLE ::= { usrUserManGroup 236 } usrUserManAuthFailTrapsState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether the User Authentication Failure Trap is enabled or disabled." DEFVAL { enabled } --CONFIGURABLE ::= { usrUserManGroup 231 } usrUserManAuthFailure TRAP-TYPE ENTERPRISE usrUserManTraps VARIABLES { usrUserManRadiusIP, usrUserManRadiusAltIP, usrUserManRadiusTertiaryIP } DESCRIPTION "This trap is generated when authentication fails for a user." --#TYPE "Alarm" ::= 1 usrUserManRadiusBusyoutTrap TRAP-TYPE ENTERPRISE usrUserManTraps VARIABLES { usrUserManRadiusIP, usrUserManRadiusAltIP, usrUserManRadiusTertiaryIP, usrUserManRadiusAcctIP, usrUserManRadiusAcctFirstBackupIP, usrUserManRadiusAcctSecondBackupIP, usrUserManRadiusAcctAltIP, usrUserManRadiusAcctAltFirstBackupIP, usrUserManRadiusAcctAltSecondBackupIP } DESCRIPTION "This trap is generated when none of the authentication or accounting servers can be contacted from the NAS and we mark the ports busy." --#TYPE "Alarm" ::= 2 END