-- COPYRIGHT NOTICE
-- Copyright (c) Alteon WebSystems, Inc. 2001
-- All rights reserved
-- 
-- HISTORY
-- $Log: tigonPhysical.mib $
-- Revision work_rmundhra/7 2001/03/06 23:09:26 rmundhra
-- 	Removed Mib entry agCurCfgPortLinkTrap
-- 	and agNewCfgPortLinkTrap as we can configure via
-- 	ifLinkUpDownTrapEnable defined in rfc1573.mib.
-- 
-- Revision work_rmundhra/4 2001/03/01 17:16:43 rmundhra
-- 	Added SNMP support for configuring LinkTrap enabled/disabled.
-- 
-- Revision genie_rekha/5 2001/02/16 00:12:49 rekha
-- 	Fixed 10218: Added MIB object for port mirroring timeout.
-- 
-- Revision genie_rekha/2 2001/02/08 18:18:03 rekha
-- 	As part of the code cleanup split the Tigon MIB into smaller
-- 	modules. Instead of altswitch.mib these 5 new modules should be
-- 	used.
-- 
-- $EndLog$
-- 
-- Version 9.0.x
--

ALTEON-TS-PHYSICAL-MIB DEFINITIONS ::= BEGIN

IMPORTS
    IpAddress, Counter, Gauge 
        FROM RFC1155-SMI
    OBJECT-TYPE
        FROM RFC-1212
    PhysAddress, DisplayString
        FROM RFC1213-MIB
    switch 
        FROM ALTEON-ROOT-MIB
    stats, information, agent
        FROM ALTEON-PRIVATE-MIBS;

vlans             OBJECT IDENTIFIER ::= { switch 4 }
portmirroring     OBJECT IDENTIFIER ::= { switch 6 }
trunkgroup        OBJECT IDENTIFIER ::= { switch 7 }

agPortConfig      OBJECT IDENTIFIER ::= { agent 3 }

portCpuStats	  OBJECT IDENTIFIER ::= { stats  17 }

port-info	  OBJECT IDENTIFIER ::= { information 1 }

-- Agent Port Table

agPortTableMaxEnt OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The maximum number of rows in the port configuration host table."
    ::= { agPortConfig 1 }

agPortCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgPortCurCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of port configuration in the current_configuration block."
    ::= { agPortConfig 2 }

agPortCurCfgTableEntry OBJECT-TYPE
    SYNTAX  AgPortCurCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the port table in the current_configuration block."
    INDEX   { agPortCurCfgIndx }
    ::= { agPortCurCfgTable 1 }

AgPortCurCfgTableEntry ::= SEQUENCE {
    agPortCurCfgIndx           INTEGER,
    agPortCurCfgPrefLink       INTEGER,
    agPortCurCfgBackLink       INTEGER,
    agPortCurCfgState          INTEGER,
    agPortCurCfgVlanTag        INTEGER,
    agPortCurCfgStp            INTEGER,
    agPortCurCfgRmon           INTEGER,
    agPortCurCfgPVID           INTEGER,
    agPortCurCfgFastEthAutoNeg INTEGER,
    agPortCurCfgFastEthSpeed   INTEGER,
    agPortCurCfgFastEthMode    INTEGER,
    agPortCurCfgFastEthFctl    INTEGER,
    agPortCurCfgGigEthAutoNeg  INTEGER,
    agPortCurCfgGigEthFctl     INTEGER,
    agPortCurCfgPortName       DisplayString,
    agPortCurCfgBwmContract    INTEGER,
    agPortCurCfgDiscardNonIPs  INTEGER
    }

agPortCurCfgIndx OBJECT-TYPE
    SYNTAX  INTEGER  (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of the row in port configurations table."
    ::= { agPortCurCfgTableEntry 1 }

agPortCurCfgPrefLink OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        fast-ethernet(2),
        gigabit-ethernet(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This is the preferred link."
    ::= { agPortCurCfgTableEntry 2 }

agPortCurCfgBackLink OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        fast-ethernet(2),
        gigabit-ethernet(3),
        none(4)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This is the backup link."
    ::= { agPortCurCfgTableEntry 3 }

agPortCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        enabled(2),
        disabled(3)
	}
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This is the state of the port."
    ::= { agPortCurCfgTableEntry 4 }

agPortCurCfgVlanTag OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        tagged(2),
        untagged(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This is VLAN tag state of the port"
    ::= { agPortCurCfgTableEntry 5 }

agPortCurCfgStp OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        on(2),
        off(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn Spanning Tree on or off for the port."
    ::= { agPortCurCfgTableEntry 6 }

agPortCurCfgRmon OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        on(2),
        off(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn RMON on or off on the port."
   ::= { agPortCurCfgTableEntry 7 }

agPortCurCfgPVID OBJECT-TYPE
    SYNTAX  INTEGER (1..4094)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The default VLAN ID for the port."
    ::= { agPortCurCfgTableEntry 8 }

agPortCurCfgFastEthAutoNeg OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        on(2),
        off(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn the autonegotiation on or off
         for fast Ethernet connection."
    ::= { agPortCurCfgTableEntry 9 }

agPortCurCfgFastEthSpeed OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        mbs10(2),
        mbs100(3),
        mbs10or100(4)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Selects the port speed for fast Ethernet connection."
    ::= { agPortCurCfgTableEntry 10 }

agPortCurCfgFastEthMode OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        full-duplex(2),
        half-duplex(3),
        full-or-half-duplex(4)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object is used to select port mode for fast Ethernet connection."
    ::= { agPortCurCfgTableEntry 11 }

agPortCurCfgFastEthFctl OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        transmit(2),
        receive(3),
        both(4),
        none(5)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Selects the port flow control for fast Ethernet connection."
    ::= { agPortCurCfgTableEntry 12 }

agPortCurCfgGigEthAutoNeg OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        on(2),
        off(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn the autonegotiation on or off
         for gigabit Ethernet connection."
    ::= { agPortCurCfgTableEntry 13 }

agPortCurCfgGigEthFctl OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        transmit(2),
        receive(3),
        both(4),
        none(5)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object is used to select port flow control for
         gigabit Ethernet connection."
    ::= { agPortCurCfgTableEntry 14 }

agPortCurCfgPortName	OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..63))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The switch port name."
    ::= { agPortCurCfgTableEntry 15 }

agPortCurCfgBwmContract OBJECT-TYPE
    SYNTAX  INTEGER (1..1024) 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The switch port Bandwidth Management contract number."
    ::= { agPortCurCfgTableEntry 16 }

agPortCurCfgDiscardNonIPs OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        enabled(2),
        disabled(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable to discard all non-IP traffic on the switch port."
    ::= { agPortCurCfgTableEntry 17 }

agPortNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgPortNewCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of port configuration in the new_configuration block."
    ::= { agPortConfig 3 }

agPortNewCfgTableEntry OBJECT-TYPE
    SYNTAX  AgPortNewCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the port configuration table in the new_configuration block."
    INDEX   { agPortNewCfgIndx }
    ::= { agPortNewCfgTable 1 }

AgPortNewCfgTableEntry ::= SEQUENCE {
    agPortNewCfgIndx           INTEGER,
    agPortNewCfgPrefLink       INTEGER,
    agPortNewCfgBackLink       INTEGER,
    agPortNewCfgState          INTEGER,
    agPortNewCfgVlanTag        INTEGER,
    agPortNewCfgStp            INTEGER,
    agPortNewCfgRmon           INTEGER,
    agPortNewCfgPVID           INTEGER,
    agPortNewCfgFastEthAutoNeg INTEGER,
    agPortNewCfgFastEthSpeed   INTEGER,
    agPortNewCfgFastEthMode    INTEGER,
    agPortNewCfgFastEthFctl    INTEGER,
    agPortNewCfgGigEthAutoNeg  INTEGER,
    agPortNewCfgGigEthFctl     INTEGER,
    agPortNewCfgPortName       DisplayString,
    agPortNewCfgBwmContract    INTEGER,
    agPortNewCfgDiscardNonIPs  INTEGER
    }

agPortNewCfgIndx OBJECT-TYPE
    SYNTAX  INTEGER  (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of the row in port configurations table."
    ::= { agPortNewCfgTableEntry 1 }

agPortNewCfgPrefLink OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        fast-ethernet(2),
        gigabit-ethernet(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is the preferred link."
    ::= { agPortNewCfgTableEntry 2 }

agPortNewCfgBackLink OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        fast-ethernet(2),
        gigabit-ethernet(3),
        none(4)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is the backup link."
    ::= { agPortNewCfgTableEntry 3 }

agPortNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        enabled(2),
        disabled(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is the state of the port."
    ::= { agPortNewCfgTableEntry 4 }

agPortNewCfgVlanTag OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        tagged(2),
        untagged(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is VLAN tag state of the port"
    ::= { agPortNewCfgTableEntry 5 }

agPortNewCfgStp OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        on(2),
        off(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn Spanning Tree on or off for the port."
    ::= { agPortNewCfgTableEntry 6 }

agPortNewCfgRmon OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        on(2),
        off(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn RMON on or off on the port."
    ::= { agPortNewCfgTableEntry 7 }

agPortNewCfgPVID OBJECT-TYPE
    SYNTAX  INTEGER (1..4094)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The default VLAN ID for the port."
    ::= { agPortNewCfgTableEntry 8 }

agPortNewCfgFastEthAutoNeg OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        on(2),
        off(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn the autonegotiation on or off
         for fast Ethernet connection."
    ::= { agPortNewCfgTableEntry 9 }

agPortNewCfgFastEthSpeed OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        mbs10(2),
        mbs100(3),
        mbs10or100(4)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Selects the port speed for fast Ethernet connection."
    ::= { agPortNewCfgTableEntry 10 }
 
agPortNewCfgFastEthMode OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        full-duplex(2),
        half-duplex(3),
        full-or-half-duplex(4)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This object is used to select port mode for fast Ethernet connection."
    ::= { agPortNewCfgTableEntry 11 }

agPortNewCfgFastEthFctl OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        transmit(2),
        receive(3),
        both(4),
        none(5)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Selects the port flow control for fast Ethernet connection."
    ::= { agPortNewCfgTableEntry 12 }

agPortNewCfgGigEthAutoNeg OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        on(2),
        off(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn the autonegotiation on or off
         for gigabit Ethernet connection."
    ::= { agPortNewCfgTableEntry 13 }

agPortNewCfgGigEthFctl OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        transmit(2),
        receive(3),
        both(4),
        none(5)
       }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This object is used to select port flow control for
         gigabit Ethernet connection."
    ::= { agPortNewCfgTableEntry 14 }

agPortNewCfgPortName	OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..63))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The switch port name."
    ::= { agPortNewCfgTableEntry 15 }

agPortNewCfgBwmContract OBJECT-TYPE
    SYNTAX  INTEGER (1..1024) 
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The switch port Bandwidth Management contract number."
    ::= { agPortNewCfgTableEntry 16 }

agPortNewCfgDiscardNonIPs OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        enabled(2),
        disabled(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable to discard all non-IP traffic on the switch port."
    ::= { agPortNewCfgTableEntry 17 }

-- VLAN group

vlanMaxEnt OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The maximum number of rows in the VLAN configuration table."
    ::= { vlans 1 }

vlanCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VlanCurCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of VLAN configuration."
    ::= { vlans 2 }

vlanCurCfgTableEntry OBJECT-TYPE
    SYNTAX  VlanCurCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the VLAN configuration table."
    INDEX  { vlanCurCfgVlanId }
    ::= { vlanCurCfgTable 1 }

VlanCurCfgTableEntry ::= SEQUENCE {
    vlanCurCfgVlanId 		INTEGER,
    vlanCurCfgVlanName 		DisplayString,
    vlanCurCfgPorts 		OCTET STRING,
    vlanCurCfgState 		INTEGER,
    vlanCurCfgJumbo 		INTEGER,
    vlanCurCfgBwmContract	INTEGER
    }

vlanCurCfgVlanId OBJECT-TYPE
    SYNTAX  INTEGER  (1..4094)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VLAN identifier."
    ::= { vlanCurCfgTableEntry 1 }

vlanCurCfgVlanName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VLAN name."
    ::= { vlanCurCfgTableEntry 2 }

vlanCurCfgPorts	OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..16))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port list in the VLAN. The ports are presented in bitmap format.
	 in receiving order:

	     OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ port 8
             ||    ||  
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the VLAN
		   0 - The represented port does not belong to the VLAN"
    ::= { vlanCurCfgTableEntry 3 }

vlanCurCfgState	OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
	enabled(2),
	disabled(3)
	}
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable a VLAN"
    ::= { vlanCurCfgTableEntry 4 }

vlanCurCfgJumbo OBJECT-TYPE
    SYNTAX  INTEGER  {
	other(1),
	enabled(2),
	disabled(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or Disable the Jumbo frame support for the VLAN "
    ::= { vlanCurCfgTableEntry 5 }

vlanCurCfgBwmContract OBJECT-TYPE
    SYNTAX  INTEGER (1..1024)  
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Default contract number the VLAN "
    ::= { vlanCurCfgTableEntry 6 }

vlanNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VlanNewCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of VLAN configuration."
    ::= { vlans 3 }

vlanNewCfgTableEntry OBJECT-TYPE
    SYNTAX  VlanNewCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the VLAN configuration table."
    INDEX  { vlanNewCfgVlanId }
    ::= { vlanNewCfgTable 1 }

VlanNewCfgTableEntry ::= SEQUENCE {
    vlanNewCfgVlanId 		INTEGER,
    vlanNewCfgVlanName 		DisplayString,
    vlanNewCfgPorts 		OCTET STRING,
    vlanNewCfgState 		INTEGER,
    vlanNewCfgJumbo 		INTEGER,
    vlanNewCfgAddPort 		INTEGER,
    vlanNewCfgRemovePort	INTEGER,
    vlanNewCfgDelete 		INTEGER,
    vlanNewCfgBwmContract	INTEGER
    }

vlanNewCfgVlanId OBJECT-TYPE
    SYNTAX  INTEGER  (1..4094)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VLAN identifier."
    ::= { vlanNewCfgTableEntry 1 }

vlanNewCfgVlanName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The VLAN name."
    ::= { vlanNewCfgTableEntry 2 }

vlanNewCfgPorts	OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..16))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port list in the VLAN.  The ports are presented in bitmap format.
         in receiving order:

	     OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ port 8
             ||    ||  
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the VLAN
	           0 - The represented port does not belong to the VLAN"
    ::= { vlanNewCfgTableEntry 3 }

vlanNewCfgState	OBJECT-TYPE
    SYNTAX  INTEGER  {
	other(1),
	enabled(2),
	disabled(3)
	}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable a VLAN"
    ::= { vlanNewCfgTableEntry 4 }

vlanNewCfgJumbo OBJECT-TYPE
    SYNTAX  INTEGER  {
	other(1),
	enabled(2),
	disabled(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or Disable the Jumbo frame support for the VLAN "
    ::= { vlanNewCfgTableEntry 5 }

vlanNewCfgAddPort OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The port to be added to the specified VLAN.  A '0' value is 
         returned when read."
    ::= { vlanNewCfgTableEntry 6 }

vlanNewCfgRemovePort OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The port to be removed from the specified VLAN.  A '0'
         value is returned when read."
    ::= { vlanNewCfgTableEntry 7 }

vlanNewCfgDelete OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        delete(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is an action object to create or delete a VLAN.
         other(1) is returned always when read.
         The following values are writable: delete(2)...to delete a VLAN"
    ::= { vlanNewCfgTableEntry 8 }

vlanNewCfgBwmContract OBJECT-TYPE
    SYNTAX  INTEGER (1..1024)  
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Default contract number for the VLAN."
    ::= { vlanNewCfgTableEntry 9 }

-- Port Mirroring Group

pmCurCfgMonitoringPort OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port number of the monitoring port."
    ::= { portmirroring 1 }

pmNewCfgMonitoringPort OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The port number of the monitoring port."
    ::= { portmirroring 2 }

pmCurCfgMirroredPort OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	"The port number of the mirrored port."
    ::= { portmirroring 3 }

pmNewCfgMirroredPort OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The port number of the mirrored port."
    ::= { portmirroring 4 }

pmCurCfgMonitoredTraffic OBJECT-TYPE
    SYNTAX  INTEGER {
	other(1),
	none(2),
	received(3),
	transmitted(4),
	both(5)
	}
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	"The type of traffic to be monitored with respect to the mirrored 
         port."
    ::= { portmirroring 5 }

pmNewCfgMonitoredTraffic OBJECT-TYPE
    SYNTAX  INTEGER {
	other(1),
	none(2),
	received(3),
	transmitted(4),
	both(5)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The type of traffic to be monitored with respect to the
         mirrored port."
    ::= { portmirroring 6 }

pmCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
	other(1),
	enabled(2),
	disabled(3)
	}
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The state of Port mirroring."
    ::= { portmirroring 7 }
 
pmNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
	other(1),
	enabled(2),
	disabled(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The state of Port mirroring."
    ::= { portmirroring 8 }

pmCurCfgTimeout OBJECT-TYPE
    SYNTAX  INTEGER (0..86400)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	"The mirroring timeout value in seconds."
    ::= { portmirroring 9 }

pmNewCfgTimeout OBJECT-TYPE
    SYNTAX  INTEGER (0..86400)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
	"The mirroring timeout value in seconds."
    ::= { portmirroring 10 }

-- Trunk Group Group

trunkGroupTableMaxSize OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The maximum number of entries in trunk group table."
    ::= { trunkgroup 1 }

trunkGroupCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF TrunkGroupCurCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of trunk group configuration."
    ::= { trunkgroup 2 }

trunkGroupCurCfgTableEntry OBJECT-TYPE
    SYNTAX  TrunkGroupCurCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the trunk group configuration table."
    INDEX   { trunkGroupCurCfgIndex }
    ::= { trunkGroupCurCfgTable 1 }

TrunkGroupCurCfgTableEntry ::= SEQUENCE {
    trunkGroupCurCfgIndex         INTEGER,
    trunkGroupCurCfgPorts         OCTET STRING,
    trunkGroupCurCfgState         INTEGER,
    trunkGroupCurCfgBwmContract   INTEGER
    }
 
trunkGroupCurCfgIndex OBJECT-TYPE
    SYNTAX  INTEGER  
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The identifier of the trunk group."
    ::= { trunkGroupCurCfgTableEntry 1 }
 
trunkGroupCurCfgPorts OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..16))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port list in the trunk group. The ports are presented in 
         bitmap format.
 
         in receiving order:
 
             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ port 8
             ||    ||  
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the trunk group
                   0 - The represented port does not belong to the trunk group"
    ::= { trunkGroupCurCfgTableEntry 2 }
 
trunkGroupCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable a trunk group."
    ::= { trunkGroupCurCfgTableEntry 3 }
 
trunkGroupCurCfgBwmContract OBJECT-TYPE
    SYNTAX  INTEGER  
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Default BW contract of a trunk group."
    ::= { trunkGroupCurCfgTableEntry 4 }
 
-- Trunk-Group  New configuration

trunkGroupNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF TrunkGroupNewCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of trunk group configuration."
    ::= { trunkgroup 3 }

trunkGroupNewCfgTableEntry OBJECT-TYPE
    SYNTAX  TrunkGroupNewCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the trunk group configuration table."
    INDEX   { trunkGroupNewCfgIndex }
    ::= { trunkGroupNewCfgTable 1 }

TrunkGroupNewCfgTableEntry ::= SEQUENCE {
    trunkGroupNewCfgIndex          INTEGER,
    trunkGroupNewCfgPorts          OCTET STRING,
    trunkGroupNewCfgAddPort        INTEGER,
    trunkGroupNewCfgRemovePort     INTEGER,
    trunkGroupNewCfgState          INTEGER,
    trunkGroupNewCfgDelete         INTEGER,
    trunkGroupNewCfgBwmContract    INTEGER
    }
 
trunkGroupNewCfgIndex OBJECT-TYPE
    SYNTAX  INTEGER  
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The identifier of the trunk group."
    ::= { trunkGroupNewCfgTableEntry 1 }
 
trunkGroupNewCfgPorts OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..16))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port list in the trunk group.  The ports are presented
         in bitmap format.

         in receiving order:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ port 8
             ||    ||  
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved
 
         where x : 1 - The represented port belongs to the trunk group
                   0 - The represented port does not belong to the trunk group"
    ::= { trunkGroupNewCfgTableEntry 2 }
 
trunkGroupNewCfgAddPort OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The port to be added in the trunk group. When read, 0 is returned."
    ::= { trunkGroupNewCfgTableEntry 3 }

trunkGroupNewCfgRemovePort OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The port to be deleted from the trunk group. when read, 0
	 is returned."
    ::= { trunkGroupNewCfgTableEntry 4 }

trunkGroupNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable a trunk group."
    ::= { trunkGroupNewCfgTableEntry 5 }
 
trunkGroupNewCfgDelete OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        delete(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Setting the value to delete(2) will delete the entire
         row. When read, other(1) is returned."
    ::= { trunkGroupNewCfgTableEntry 6 }

trunkGroupNewCfgBwmContract OBJECT-TYPE
    SYNTAX  INTEGER  
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Default BW contract of a trunk group."
    ::= { trunkGroupNewCfgTableEntry 7 }

-- Port CPU utilization table

portCpuStatsUtilTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PortCpuStatsUtilTableEntry 
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of port CPU utilization."
    ::= { portCpuStats 1 }

portCpuStatsUtilTableEntry OBJECT-TYPE
    SYNTAX  PortCpuStatsUtilTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the port CPU utilization table."
    INDEX   { portCpuStatsUtilIndx }
    ::= { portCpuStatsUtilTable 1 }

PortCpuStatsUtilTableEntry ::= SEQUENCE {
    portCpuStatsUtilIndx 	    INTEGER,
    portCpuAStatsUtil1Second	    INTEGER,
    portCpuBStatsUtil1Second	    INTEGER,
    portCpuAStatsUtil4Seconds	    INTEGER,
    portCpuBStatsUtil4Seconds       INTEGER,
    portCpuAStatsUtil64Seconds      INTEGER,
    portCpuBStatsUtil64Seconds      INTEGER
    }

portCpuStatsUtilIndx OBJECT-TYPE
    SYNTAX  INTEGER  (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port index."
    ::= { portCpuStatsUtilTableEntry 1 }

portCpuAStatsUtil1Second OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of port CPU A over 1 second. It shows the percentage."
    ::= { portCpuStatsUtilTableEntry 2}
 
portCpuBStatsUtil1Second OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of port CPU B over 1 second. It shows the percentage."
    ::= { portCpuStatsUtilTableEntry 3}

portCpuAStatsUtil4Seconds OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of port CPU A over 4 seconds.
         It shows the percentage."
    ::= { portCpuStatsUtilTableEntry 4}
 
portCpuBStatsUtil4Seconds OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of port CPU B over 4 seconds.
         It shows the percentage."
    ::= { portCpuStatsUtilTableEntry 5}

portCpuAStatsUtil64Seconds OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of port CPU A over 64 seconds.
	 It shows the percentage."
    ::= { portCpuStatsUtilTableEntry 6}
 
portCpuBStatsUtil64Seconds OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of port CPU B over 64 seconds.
	 It shows the percentage."
    ::= { portCpuStatsUtilTableEntry 7}


-- Information Group

-- This group represents run-time status of the system

-- Port information table

portInfoTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PortInfoTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of port information."
    ::= { port-info 1 }

portInfoTableEntry OBJECT-TYPE
    SYNTAX  PortInfoTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the port information table."
    INDEX   { portInfoIndx }
    ::= { portInfoTable 1 }

PortInfoTableEntry ::= SEQUENCE {
    portInfoIndx        INTEGER,
    portInfoSpeed       INTEGER,
    portInfoMode        INTEGER,
    portInfoFlowCtrl    INTEGER,
    portInfoLink        INTEGER
    }

portInfoIndx OBJECT-TYPE
    SYNTAX  INTEGER  (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port index."
    ::= { portInfoTableEntry 1 }

portInfoSpeed OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        mbs10(2),
        mbs100(3),
        mbs1000(4),
        any(5)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The current operational speed of the port."
    ::= { portInfoTableEntry 2 }

portInfoMode OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        full-duplex(2),
        half-duplex(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The current operational mode of the port."
    ::= { portInfoTableEntry 3 }

portInfoFlowCtrl OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        transmit(2),
        receive(3),
        both(4),
        none(5)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The current operational flow control of the port."
    ::= { portInfoTableEntry 4 }

portInfoLink OBJECT-TYPE
    SYNTAX  INTEGER {
        up(1),
        down(2),
        disabled(3),
        inoperative(4) -- unrecognized PCI device
        }
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "The current operational link status of the port."
     ::= { portInfoTableEntry 5 }

END