-- *************************************************************************** -- * Cascade Communications STDX/B-STDX MIB definitions * -- -- Date Engineer Description -- -------------------------------------------------------------------------- -- 05/11/94 Mike Bernstein Added new pportInterface types for E1 -- 06/10/94 Ren Yonghong Added some SVC objects -- 10/06/94 Ren Yonghong Reserved trap number 36 for SVC -- 10/06/94 Arvind Puntambekar Added SMDS modifications for 4.0 release -- 10/20/94 Ren Yonghong Detailed all possible values for pportDataRate -- 11/15/94 Ren Yonghong Clarified and enhanced several objects -- 12/14/94 Dan Bergman Added ISDN objects -- 12/15/94 Chris D'Souza Added dsx3 loopback objects -- 12/21/94 Eric Li Added dsx3 FEAC status object -- 01/09/95 Mike Drozdick Added lportLastInvalidDLCI and -- lportTrkProtState. -- 01/11/95 Mike Drozdick Added cardTrkProtState. -- 01/16/95 Chris D'Souza Added ds1 loopback objects -- 01/19/95 Martin Jensen Added version info objects to card group -- 03/06/95 Chris D'Souza Modified objects for short haul T1 cards -- 03/10/95 John Moy Added lportTrkTrafficMix. -- 04/17/95 Jim Coronella Added Atm pport and ckt objects. -- 04/20/95 Jonathan West fix diag code for hssi online diag tests -- 04/28/95 Jim Martel Added Atm ckt objects for cell rates -- 05/05/95 John Moy Added lport objects for routing QoS changes -- 07/11/95 Martin Jensen Add software group to support full s/w id -- 05/25/95 Jonathan West Added lport objects for QoS bandwidth management -- 05/31/95 Jonathan West Added ckt objects for ATM traffic -- 06/07/95 Ron Parker Added: cascsvc branch, -- cascsvc.svcaddress group, -- cascsvc.svcaddress.svcNodePrefixTable, -- cascsvc.svcaddress.svcPrefixTable, -- cascsvc.svcaddress.svcAddrTable, -- cascsvc.svcaddress.svcDteUserPartTable, -- cascsvc.svcmgt group, -- cascsvc.svcmgt.svcFailedCallTable, -- cascfr.ckt.cktLeafTable, -- cascfr.lport.atmSigLportTable, -- ATM lport entries, -- svc ident stats upload lport entry, -- svcFailedCall trap -- 06/09/95 Phil Malloy Added OAM objects to node, lport, and ckt -- 06/09/95 Eric Li Added Topaz IOM timing, various cell counters, -- etc. in card and pport group. -- 06/12/95 Ron Parker Change indexing of SVC Failed Call Log to -- port.inst. -- Change diag code object to octet string. -- 06/19/95 Jonathan West lport vars: lportInVAvailbw, lportbwUNIPolicy. -- 06/20/95 Jim Coronella Added DS3 PLCP Enable/Disable. -- 06/23/95 Ruediger Eckhard Added B-STDX 9000 CBR/ATM-IWU objects. -- 06/23/95 Eric Li Added Topaz OC3 & STM1 IOPs. -- 06/26/95 Stephen Bortolussi Added traps and lport objects for SMDS -- Network trouble shooting. -- 06/27/95 Mardy Marshall Added: Objects to the Node Group for B-STDX 500 -- Application/Configuration backup and -- restoration and management. -- Objects to the Node Group and Traps -- for B-STDX 500 System Timing Management. -- 06/29/95 Oliver Lin Added: CardCpuFgUtil for Cpu foreground -- utilization. And move the -- cardTrkProtState. -- 07/07/95 Ron Parker Added svcRemotePrefixTable to cascsvc.svcaddr. -- 07/12/95 Mike Bernstein Modified comment for pportDataRate -- Added cktFailReason 29, 30 -- Updated lportErrType values through 19 -- 07/19/95 Ruediger Eckhard Removed double defined -- ckt{In,Out}CellsCLP[01] -- Added pportOc3LoopConfig and -- pportOc3LoopStatus -- 07/25/95 Mike Drozdick Added lportTrkProtFailureThreshold. -- 07/31/95 Mike Drozdick Added lportPtr. -- 08/02/95 Eric Li Added cardSystemPrimaryClockModeConfig & -- cardSystemSecondaryClockModeConfig -- 08/08/95 Ron Parker Added svcConfigTable, moved atmSigLportTable -- to svcAtmConfigTable. -- 08/14/95 Dan Bergman Add cardISDNSigType, cardISDNChanId, -- pportISDNIpBaseAddr, -- lportISDNPoolUtil, lportISDNIpAddrAssignFail & -- the trap lportISDNIpAddrRej -- Changed lportISDNRejCnt to lportISDNIpAddr -- 08/21/95 Dan Bergman Moved cardISDNSigType and cardISDNChanId up to -- where SWBuild and SWBuildID were located -- 08/31/95 RonParker Expanded Q.93B and Q.SAAL statistics in -- svcAtmConfigTable. -- Rename svcFailedCallTable to -- svcAtmFailedCallTable. -- 09/13/95 Eric Li Add traps for IOM timing section -- 09/22/95 Mike Drozdick Clarify definition of lportLastInvalidDLCI. -- 09/25/95 Larry Palmer Removed svcaddr, netSvcAddrNetWidth, -- netSvcAddrPortWidth, netSvcAddrUserWidth, -- svcAddressTable -- 09/29/95 Eric Li Add pportSonetSTM1Scramble & clarified -- pportLaserStatus -- *************************************************************************** CASCADE-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI DisplayString, ifInErrors FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; -- This MIB module uses the extended OBJECT-TYPE macro as defined in RFC 1212 -- Title cascade OBJECT IDENTIFIER ::= { enterprises 277 } cascfr OBJECT IDENTIFIER ::= { cascade 1 } cascsmds OBJECT IDENTIFIER ::= { cascade 2 } namebinding OBJECT IDENTIFIER ::= { cascade 3 } isdnaddr OBJECT IDENTIFIER ::= { cascade 4 } cascsvc OBJECT IDENTIFIER ::= { cascade 5 } software OBJECT IDENTIFIER ::= { cascade 6 } provserver OBJECT IDENTIFIER ::= { cascade 9 } -- The ranges of ifIndex Index ::= INTEGER -- 1..ifNumber net OBJECT IDENTIFIER ::= { cascfr 1 } ase OBJECT IDENTIFIER ::= { cascfr 2 } node OBJECT IDENTIFIER ::= { cascfr 3 } pport OBJECT IDENTIFIER ::= { cascfr 4 } lport OBJECT IDENTIFIER ::= { cascfr 5 } ckt OBJECT IDENTIFIER ::= { cascfr 6 } card OBJECT IDENTIFIER ::= { cascfr 7 } ds1 OBJECT IDENTIFIER ::= { cascfr 8 } smdsaddr OBJECT IDENTIFIER ::= { cascsmds 1 } svcaddress OBJECT IDENTIFIER ::= { cascsvc 1 } svcmgt OBJECT IDENTIFIER ::= { cascsvc 2 } -- The Network Group -- -- The variables that are relevant to a Cascade network -- netMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP subnet mask for the network. The default is 255.255.255.0 (class C) which allows 254 nodes." ::= { net 1 } netNumber OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP network number for the network." ::= { net 2 } netDlciAddrSig OBJECT-TYPE SYNTAX INTEGER { globalAddr (1), localAddr (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable states the DLCI addressing significance." ::= { net 3 } netMaxSegsize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable states the maximum sgement size for the network." ::= { net 4 } netSmdsAreaMaskStart OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable states the starting digit number for defining the start of the Area Mask for SMDS Addresses." ::= { net 8 } netSmdsAreaMaskDigits OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable states the number of digits used for defining the Area Mask for SMDS Addresses." ::= { net 9 } -- -- OSPF Autonomous System External Device and Host Table - For NMS paths -- (Currently an External Device is always accessible via Ethernet, -- whereas a Host is always accessible via SLIP.) -- aseTable OBJECT-TYPE SYNTAX SEQUENCE OF AseEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of ASE entries." ::= { ase 1 } aseEntry OBJECT-TYPE SYNTAX AseEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An ASE entry contains an external NMS path accessible from the node." INDEX { aseAddr } ::= { aseTable 1 } AseEntry ::= SEQUENCE { aseAddr IpAddress, aseMask IpAddress, aseDefaultGwAddr IpAddress, aseMetricType INTEGER, aseAdminStatus INTEGER, aseIfIndex Index, aseDlci INTEGER } aseAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Address for an external NMS." ::= { aseEntry 1 } aseMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Address mask for an external NMS. The default value is 255.255.255.255." ::= { aseEntry 2 } aseDefaultGwAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Default Gateway IP Address for reaching the external NMS. This field is not applicable to NMSs which are reachable via SLIP or on the same Ethernet." ::= { aseEntry 3 } aseMetricType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Type of metric (1 or 2) for each external NMS. The default is 1. (This field is not applicable to SLIP- based hosts.)" ::= { aseEntry 4 } aseAdminStatus OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), valid (1) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the entry." ::= { aseEntry 5 } aseIfIndex OBJECT-TYPE SYNTAX Index ACCESS read-write STATUS mandatory DESCRIPTION "The interface value of the corresponding MIB-II ifEntry." ::= { aseEntry 6 } aseDlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The management dlci through which the NMS communicates to the switch." ::= { aseEntry 7 } -- The Node Group -- -- The variables that configure a node -- nodeIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The inband IP address of the node in the Cascade internal trunk IP network." ::= { node 1 } nodeLanIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The inband (Ethernet) IP address of the node for a NMS to access the node and the internal trunk IP network." ::= { node 2 } nodeNMSTable OBJECT-TYPE SYNTAX SEQUENCE OF NodeNMSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of NMS entries." ::= { node 3 } nodeNMSEntry OBJECT-TYPE SYNTAX NodeNMSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A NMS entry contains an IP address of a NMS which has extended privilages." INDEX { nodeNMSIndex } ::= { nodeNMSTable 1 } NodeNMSEntry ::= SEQUENCE { nodeNMSIndex Index, nodeNMSIpAddr IpAddress } nodeNMSIndex OBJECT-TYPE SYNTAX Index ACCESS read-only STATUS mandatory DESCRIPTION "The IP address entry of a primary Network Management Station." ::= { nodeNMSEntry 1 } nodeNMSIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the primary Network Management Station. It is to this address that Traps and TFTP requests will be directed." ::= { nodeNMSEntry 2 } nodeState OBJECT-TYPE SYNTAX INTEGER { down (1), initializing (2), active (3), marginal (4), testing (5) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of the switch. The switch needs to await the state to be set to active before being fully operational after cold boot, when the NMS is reachable." ::= { node 4 } nodePollStatus OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The consolidated node status in response to keep-alive polls. It is an octet string of a proprietary format" ::= { node 5 } nodeModel OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The part number of the node." ::= { node 6 } nodeSerial OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The serial number (i.e., Ethernet Addr) of the switch." ::= { node 7 } nodeSwRev OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The software revision number (major.minor)." ::= { node 8 } nodeHwRev OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The hardware revision number (major.minor)." ::= { node 9 } nodeEpromRev OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The EPROM firmware revision number (major.minor)." ::= { node 10 } nodeCpuUtil OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The CPU utilization percentage for packet processing." ::= { node 11 } nodePsAStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), marginal (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the power supply A. For a detailed explanation for the power supply being either in the down or marginal state, refer to the nodePsADiagCode object." ::= { node 12 } nodePsBStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), marginal (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the power supply B. For a detailed explanation for the power supply being either in the down or marginal state, refer to the nodePsBDiagCode object." ::= { node 13 } nodeFanTable OBJECT-TYPE SYNTAX SEQUENCE OF NodeFanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of fan entries." ::= { node 14 } nodeFanEntry OBJECT-TYPE SYNTAX NodeFanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Fan entry contains the status of a fan." INDEX { nodeFanIndex } ::= { nodeFanTable 1 } NodeFanEntry ::= SEQUENCE { nodeFanIndex INTEGER, nodeFanStatus INTEGER, nodeFanSpeed Gauge } nodeFanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each fan." ::= { nodeFanEntry 1 } nodeFanStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), marginal (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the fan." ::= { nodeFanEntry 2 } nodeFanSpeed OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The speed in Revolutions Per. Minute (RPM) of the fan." ::= { nodeFanEntry 3 } nodeMemoryUtil OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The percentage of system memory utilization on this intelligent card." ::= { node 15 } nodeMemoryUsage OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The system memory utilization, in terms of free bytes, for this intelligent card." ::= { node 16 } nodeMaxFramesize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum frame size supported by the node. The default is 4096." ::= { node 17 } nodeQOSPollTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The timer (seconds) for generating QOS polling packets." ::= { node 18 } nodeActivePvcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of currently active PVCs on the node." ::= { node 19 } nodeInactivePvcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of currently inactive PVCs on the node." ::= { node 20 } nodePendingPvcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of currently call pending PVCs on the node." ::= { node 21 } nodeInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets received on the node, including framing bytes." ::= { node 22 } nodeInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received on the node." ::= { node 23 } nodeOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets transmitted out of the node, including framing bytes." ::= { node 24 } nodeOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets requested to be transmitted out of the node, including those that were discarded or not sent." ::= { node 25 } nodeSwFilename OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Name of the file to be downloaded." ::= { node 26 } nodeRebootAfterLoad OBJECT-TYPE SYNTAX INTEGER { -- no-reboot (0), reboot (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Instructs the device to either automatically reboot after the successful scheduled download or not." ::= { node 27 } nodeSwToLoad OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Instructs the device to initiate a software download (via tftp) request to the master management station after the specified time ticks have elapsed." ::= { node 28 } nodeSwLoadState OBJECT-TYPE SYNTAX INTEGER { inactive (1), pending (2), active (3), failed (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of the software download request. A download which is in either the PENDING, ACTIVE or FAILED state can be terminated by setting this object to INACTIVE." ::= { node 29 } nodePrFilename OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Name of the PRAM image file to be downloaded." ::= { node 30 } nodePrToLoad OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Instructs the device to initiate a PRAM image file download (via tftp) request to the master management station after the specified time ticks have elapsed." ::= { node 31 } nodePrLoadState OBJECT-TYPE SYNTAX INTEGER { inactive (1), pending (2), active (3), failed (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of the PRAM download request. A download which is in either the PENDING, ACTIVE or FAILED state can be terminated by setting this object to INACTIVE." ::= { node 32 } nodeToWarmboot OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Instructs the switch to initiate a system warm boot after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled re-boot request." ::= { node 33 } nodeToColdboot OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Instructs the switch to initiate a system cold boot after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled re-boot request." ::= { node 34 } nodeToRedundant OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "If redundancy is configured, instructs the node acting as Backup to disable the Active node and take over as the Active node. The disabling is initiated after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled request." ::= { node 35 } nodeInitiateBulkStats OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Initiates a Bulk Statistics poll and via TFTP, transfer the data to the specified IP address." ::= { node 36 } nodeDiagNonFatalSource OBJECT-TYPE SYNTAX INTEGER { power-on-diagnostics (1), background-diagnostics (2), fault (3), frame-heap (4) } ACCESS read-only STATUS mandatory DESCRIPTION "Source who reported last non-fatal error." ::= { node 37 } nodeDiagNonFatalTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Time the last non-fatal error was reported." ::= { node 38 } nodeDiagNonFatalErrMajor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Major error code of last non-fatal error." ::= { node 39 } nodeDiagNonFatalErrMinor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Minor error code of last non-fatal error." ::= { node 40 } nodeDiagNonFatalStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Ascii string describing last non-fatal error." ::= { node 41 } nodeDiagFatalSource OBJECT-TYPE SYNTAX INTEGER { power-on-diagnostics (1), background-diagnostics (2), fault (3), frame-heap (4) } ACCESS read-only STATUS mandatory DESCRIPTION "Source who reported last fatal error." ::= { node 42 } nodeDiagFatalTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Time the last fatal error was reported." ::= { node 43 } nodeDiagFatalErrMajor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Major error code of last fatal error." ::= { node 44 } nodeDiagFatalErrMinor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Minor error code of last fatal error." ::= { node 45 } nodeDiagFatalStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Ascii string describing last fatal error." ::= { node 46 } nodeDiagFatalReboots OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the switch has re-booted since last fatal error was reported." ::= { node 47 } nodeDiagFatalAddress OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Address switch was executing when it encountered fatal error." ::= { node 48 } nodeDiagBackgroundPasses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of passes made by the background diagnostics." ::= { node 49 } nodeDiagBackgroundFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of failures discovered by background diagnostics." ::= { node 50 } nodeDiagBackgroundSuccesses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of successful passes by background diagnostics." ::= { node 51 } nodeDiagLEDReset OBJECT-TYPE SYNTAX INTEGER { -- state-unchanged (0), state-to-active (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Change the node state from marginal to active. Change the LED from yellow to green." ::= { node 52 } nodeDiagPowerExtensive OBJECT-TYPE SYNTAX INTEGER { -- fast-tests (0), extensive-tests (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Should power on diagnostics do slower, extensive testing, or fast testing?" ::= { node 53 } nodePortPoll OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The consolidated port status in response to keep-alive polls." ::= { node 54 } nodeMaxTelnetConsole OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of concurrent telnet consoles allowed. The default is 2. The maximum is 5. Set it 0 to disable telnet access." ::= { node 55 } nodeConsoleTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Idle-logoff timer in minutes. The default is 5 minutes, and the maximum can be set is 60 minutes. To disable idle-logout, set this to 0." ::= { node 56 } nodeConsoleTable OBJECT-TYPE SYNTAX SEQUENCE OF NodeConsoleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of active consoles on the node, logged in through telnet or serial port." ::= { node 57 } nodeConsoleEntry OBJECT-TYPE SYNTAX NodeConsoleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information of a console." INDEX { nodeConsoleIndex } ::= { nodeConsoleTable 1 } NodeConsoleEntry ::= SEQUENCE { nodeConsoleIndex INTEGER, nodeUserName OCTET STRING, nodeUserFrom IpAddress, nodeConsoleAccessMode INTEGER, nodeConsoleUptime TimeTicks } nodeConsoleIndex OBJECT-TYPE SYNTAX INTEGER (1..6) ACCESS read-only STATUS mandatory DESCRIPTION "A positive integer to identify a console" ::= { nodeConsoleEntry 1 } nodeUserName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The login user name up to 31 characters. There is no validation of the name, i.e., any string is acceptable." ::= { nodeConsoleEntry 2 } nodeUserFrom OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address from which the user logged in. 0.0.0.0 if the user logged in through serial port." ::= { nodeConsoleEntry 3 } nodeConsoleAccessMode OBJECT-TYPE SYNTAX INTEGER { readOnly (1), readWrite (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The access mode of the console. By default, a user is in READ ONLY mode." ::= { nodeConsoleEntry 4 } nodeConsoleUptime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "How long the console has been active." ::= { nodeConsoleEntry 5 } nodePsADiagCode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The failure code of the power supply A. A non-zero value indicates one or more failures. Refer to the hardware manual for a description of the failure code." ::= { node 58 } nodePsBDiagCode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The failure code of the power supply B. A non-zero value indicates one or more failures. Refer to the hardware manual for a description of the failure code." ::= { node 59 } nodeFrameMemoryUtil OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The percentage of frame memory utilization on this intelligent card." ::= { node 60 } nodeFrameMemoryUsage OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The frame memory utilization, in terms of free bytes, for this intelligent card." ::= { node 61 } nodeCapability OBJECT-TYPE SYNTAX INTEGER { frame-relay (1), smds (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The capability of this node." ::= { node 62 } nodeSvcLastCallFailure OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "A textual string describing the last call failure." ::= { node 63 } nodeRerouteDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds delay between each reroute batch event." ::= { node 64 } nodeRerouteCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of virtual circuits to request a reroute for duing a single reroute batch event." ::= { node 65 } nodeFileTransferRequest OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to initiate file transfers to and from the switch. A management station can initiate a file transfer by settting this object of text string in the following format: operation filename time-to-wait target-host protocol where operation - [get | put], filename - configuration.[card] time-to-wait - a number in seconds target-host - the IP address of target host protocol - [tftp | ftp] Multiple transfers can be specified by repeating above with ';' between each transfer specifier. Examples: o get configuration.10 5 152.148.10.100 tftp will start a transfer of configuration information on card 10 to host 152.148.10.100 in 5 seconds. o put configuration.1 2 152.148.1.1 tftp ; get configuration.1 15 152.148.1.1 tftp will (1) transfer configuration.1 from 152.148.1.1 (2) transfer configuration.2 to 152.148.1.1 To cancel the transfer request, set this object to empty. " ::= { node 66 } nodeFileTransferStatus OBJECT-TYPE SYNTAX INTEGER { complete (1), -- transfer complete or no outstanding -- transfer request active (2), -- transfer is in progress failed (3), -- transfer failed - generic error invalid (4), -- invalid request filename (5), -- file name error or file non-existent timeout (6), -- transfer timed out canceled (7) -- transfer is cancelled } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the file tarnsfer." ::= { node 67 } nodeTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "The current wall-clock time that is set on the switch in Universal Coordinated Time (UCT). The value is the number of seconds since 00:00:00 UCT January 1, 1970." ::= { node 68 } nodeBillingAPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP Address of the Adjunct Billing Processor that is servicing this switch." ::= {node 69 } nodeBillingAPUsername OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The Username of the account on the Adjunct Billing Processor to which usage data will be transferred via FTP." ::= { node 70 } nodeBillingAPPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The Password corresponding to the account identified by nodeBillingAPUsername. A NULL string is returned when read." ::= { node 71 } nodeBillingSwAPCommsFailures OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "The number of times that communication from the switch to the Adjunct Billing Processor has failed during the current aggregation period. A failure signifies failure of a file transfer operation to the Adjunct Processor." ::= { node 72 } nodeBillingTable OBJECT-TYPE SYNTAX SEQUENCE OF NodeBillingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Billing System managable objects, indexed by service." ::= { node 73 } nodeBillingEntry OBJECT-TYPE SYNTAX NodeBillingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A nodeBillingEntry contains a set of statistics that summarize the Billing System performance for a particular service. " INDEX { nodeBillingService } ::= {nodeBillingTable 1 } NodeBillingEntry ::= SEQUENCE { nodeBillingService INTEGER, nodeBilling INTEGER, nodeBillingAggrPeriod TimeTicks, nodeBillingCurAggrPeriodStart TimeTicks, nodeBillingCurAggrPeriodEnd TimeTicks, nodeBillingCollection TimeTicks, nodeBillingDailyProcessing INTEGER, nodeBillingDPTime TimeTicks, nodeBillingUsageRecOvflWarnings Counter, nodeBillingTotalUsageRecOvflWarnings Counter, nodeBillingBillableUsageEvents Counter, nodeBillingNonBillableUsageEvents Counter, nodeBillingUsageRecCreated Counter, nodeBillingTotalUsageRecCreated Counter, nodeBillingUsageRecCrFailures Counter, nodeBillingTotalUsageRecCrFailures Counter, nodeBillingUsageRecSent Counter, nodeBillingTotalUsageRecSent Counter, nodeBillingUsageDataStoreFull Counter, nodeBillingTotalUsageDataStoreFull Counter, nodeBillingAdminAction INTEGER } nodeBillingService OBJECT-TYPE SYNTAX INTEGER { smds (1) } ACCESS read-only STATUS mandatory DESCRIPTION " The service being reported. This is the index into the table. Additional table rows for Frame Relay and ATM may be provided in the future. " ::= {nodeBillingEntry 1 } nodeBilling OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Switch to enable and disable billing on the STDX. When the value of nodeBilling is 'enabled', the value of a logical port's lportBilling object will take precedence. When the value of nodeBilling is 'disabled', it overrides all logical ports' lportBilling objects and billing is disabled across the entire switch. The default value of this object is 'disabled'. " ::= {nodeBillingEntry 2 } nodeBillingAggrPeriod OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Defines the length of the Billing Aggregation Period in seconds. The default value is 15 minutes. The minimum value is 10 minutes." ::= {nodeBillingEntry 3 } nodeBillingCurAggrPeriodStart OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The start-time of the current aggregation period, given by the number of seconds since 00:00:00 UCT January 1, 1970." ::= {nodeBillingEntry 4 } nodeBillingCurAggrPeriodEnd OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The end-time of the current aggregation period, given by the number of seconds since 00:00:00 UCT January 1, 1970." ::= {nodeBillingEntry 5 } nodeBillingCollection OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Defines how often the Data Aggregation process on the CP is to poll the IOPs for usage data. The default value is 30 second. The range is unbounded, but practical use will dictate a range from 30 seconds to 1 minute." ::= {nodeBillingEntry 6 } nodeBillingDailyProcessing OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether the Billing System is to perform a set of carrier-specific actions at the time given by nodeBillingDPTime. This object can be used to schedule the generation of statistics on a 24-hour basis, for example." ::= {nodeBillingEntry 7 } nodeBillingDPTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Defines the time (given by the number of seconds since 00:00:00 UCT) that the Billing System is to perform a set of carrier-specific actions. This object can be used to schedule the generation of statistics on a 24-hour basis, for example." ::= {nodeBillingEntry 8 } nodeBillingUsageRecOvflWarnings OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Count of the number of usage record counter-value overflow conditions that have occurred during the current aggregation period. An overflow condition exists when an attempt was made to update a usage record counter, but such an update would have overflowed the counter. In this case, the usage record is closed and a new one is opened, if there is sufficient space in the service's aggregated usage data store. " ::= {nodeBillingEntry 9 } nodeBillingTotalUsageRecOvflWarnings OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Count of the number of usage record overflow conditions that have occurred during the current day. " ::= {nodeBillingEntry 10} nodeBillingBillableUsageEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Count of the number of data units (e.g, SMDS L3 PDUs) processed for billing treatment. " ::= {nodeBillingEntry 11 } nodeBillingNonBillableUsageEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Count of the number of data units (e.g, SMDS L3 PDUs) not considered for billing treatment. " ::= {nodeBillingEntry 12 } nodeBillingUsageRecCreated OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Count of the number of usage records created during the current aggregation period. " ::= {nodeBillingEntry 13 } nodeBillingTotalUsageRecCreated OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Count of the total number of usage records created during the current day. " ::= {nodeBillingEntry 14 } nodeBillingUsageRecCrFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of usage records that could not be created during the current aggregation period. This counter is normally incremented when the usage data file is at capacity and no additional usage records can be added. " ::= {nodeBillingEntry 15 } nodeBillingTotalUsageRecCrFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of usage records that could not be created during the current day. " ::= {nodeBillingEntry 16 } nodeBillingUsageRecSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of usage records that have been transferred to the Adjunct Billing Processor during the current aggregation period. " ::= {nodeBillingEntry 17 } nodeBillingTotalUsageRecSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of usage records that have been transferred to the Adjunct Billing Processor during the current day. " ::= {nodeBillingEntry 18 } nodeBillingUsageDataStoreFull OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of times the aggregated usage data store became full during the current aggregation period. " ::= {nodeBillingEntry 19 } nodeBillingTotalUsageDataStoreFull OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of times the aggregated usage data store became full during the current day. " ::= {nodeBillingEntry 20 } nodeBillingAdminAction OBJECT-TYPE SYNTAX INTEGER { invalid (1), forceUpload (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines a set of administrative actions that can be performed by the Billing System. forceUpload - Forces the current aggregation period to end and the service's aggregated usage data file to be uploaded to the Adjunct Processor. A new aggregation period is then started. This action can be requested when billing is enabled or disabled for the service. This object always returns invalid(1) when read. " ::= {nodeBillingEntry 21 } nodeRerouteAlg OBJECT-TYPE SYNTAX INTEGER { -- negpos (0), negneg (1), pospos (2), disable (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds delay between each reroute batch event." ::= { node 74 } nodeOamAlarmDisabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If disabled then don't generate oam alarms for circuits that are down on this switch." ::= { node 76 } nodeRefclocksrcTable OBJECT-TYPE SYNTAX SEQUENCE OF NodeRefclocksrcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of generators (sources) for the system reference clock on the node. This reference clock is used by the clock generation unit (CGU) to create the system clock. To this reference clock the constant bit rate ATM interface cards (CBR cards) are synchronized." ::= { node 77 } -- The table of reference clock sources nodeRefclocksrcEntry OBJECT-TYPE SYNTAX NodeRefclocksrcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information of a single system reference clock source." INDEX { nodeRefclocksrcIndex } ::= { nodeRefclocksrcTable 1 } NodeRefclocksrcEntry ::= SEQUENCE { nodeRefclocksrcIndex INTEGER, nodeRefclocksrcPriority INTEGER, nodeRefclocksrcType INTEGER, nodeRefclocksrcSlotId INTEGER, nodeRefclocksrcPportId INTEGER } nodeRefclocksrcIndex OBJECT-TYPE SYNTAX INTEGER (1..20) ACCESS read-write STATUS mandatory DESCRIPTION "A positive integer to identify an entry in the nodeRefclocksrcTable." ::= { nodeRefclocksrcEntry 1 } nodeRefclocksrcPriority OBJECT-TYPE SYNTAX INTEGER (1..20) ACCESS read-write STATUS mandatory DESCRIPTION "The priority of the system reference clock source. A source with a nodeRefclocksrcPriority=n means that this source is used before a source with a higher value of nodeRefclocksrcPriority as long as this source is available. The system choses one of the sources with the same lowest available value of nodeRefclocksrcPriority." ::= { nodeRefclocksrcEntry 2 } nodeRefclocksrcType OBJECT-TYPE SYNTAX INTEGER { external (1), -- external clock source pport (2) -- recovered from line interface } ACCESS read-write STATUS mandatory DESCRIPTION "The type of the reference clock source. It is either an external clock source connected to a ATM-IWU or DS3 card, or the reference clock is recovered from the line interface." ::= { nodeRefclocksrcEntry 3 } nodeRefclocksrcSlotId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The card number of the reference clock source. In case of an external clock interface this is the number of the card as defined in cardLogicalSlotId. In case of a clock recovered from the line interface it is the number of the corresponding card as defined in cardLogicalSlotId." ::= { nodeRefclocksrcEntry 4 } nodeRefclocksrcPportId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interface number of the reference clock source. In case of an external clock interface this is meaningless. In case of a clock recovered from the line interface it is the number of the corresponding pport as defined in pportId." ::= { nodeRefclocksrcEntry 5 } nodeRefclockActiveSrc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The entry number of the active reference clock source in nodeRefclocksrcTable. If zero, the CGU is in free-running mode or holdover mode using the last PLL parameters." ::= { node 78 } nodeRefclockActiveCGUSlotId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical slot id of the current master CGU board." ::= { node 79 } nodeRefclockActiveCGUMode OBJECT-TYPE SYNTAX INTEGER { free-running (1), sync-to-reference-clock (2), holdover (3), extended-holdover (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The clock mode of the current master CGU board." ::= { node 80 } nodeInitiateImageBackup OBJECT-TYPE SYNTAX INTEGER { proceed (1) -- proceed with the backup } ACCESS read-write STATUS mandatory DESCRIPTION "When set, copy all of the runtime application images and configuration images to there corresponding backup locations on the hard disk." ::= { node 81 } nodeImageBackupState OBJECT-TYPE SYNTAX INTEGER { proceeding (1), -- Proceeding with the backup done (2) -- Done with backup operation } ACCESS read-only STATUS mandatory DESCRIPTION "Provides the current state of the images backup operation." ::= { node 82 } nodeInitiateImageRestore OBJECT-TYPE SYNTAX INTEGER { proceed (1) -- Proceed with the restore } ACCESS read-write STATUS mandatory DESCRIPTION "When set, copy all of the runtime application images and configuration images from their BACKUP locations on the hard disk to there corresponding ACTIVE locations on the hard disk. Once completed, reboot the entire node." ::= { node 83 } nodeApplicationTable OBJECT-TYPE SYNTAX SEQUENCE OF NodeApplicationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Application Image Descriptions." ::= { node 84 } nodeApplicationEntry OBJECT-TYPE SYNTAX NodeApplicationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An Application Entry contains a description of the application image, the version of the PRIMARY copy and the version of the SECONDARY copy." INDEX { nodeApplicationIndex } ::= { nodeApplicationTable 1 } NodeApplicationEntry ::= SEQUENCE { nodeApplicationIndex Index, nodeApplicationDescription DisplayString, nodePrimaryVersion DisplayString, nodeSecondaryVersion DisplayString } nodeApplicationIndex OBJECT-TYPE SYNTAX Index ACCESS read-only STATUS mandatory DESCRIPTION "The numeric index of application images. 1 - SP Runtime Application 2 - IOM Type A Runtime Application 3 - IOM Type B Runtime Application 4 - IOM Type C Runtime Application 5 - IOM Type D Runtime Application" ::= { nodeApplicationEntry 1 } nodeApplicationDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The description of this Application Image." ::= { nodeApplicationEntry 2 } nodePrimaryVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The version of the PRIMARY Application Image." ::= { nodeApplicationEntry 3 } nodeSecondaryVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The version of the SECONDARY Application Image." ::= { nodeApplicationEntry 4 } nodePrimarySyncRefAdminState OBJECT-TYPE SYNTAX INTEGER { externala (1), -- T1 Rate External Clock A externalb (2), -- T1 Rate External Clock B portrefa (3), -- IOM Port Reference Clock A portrefb (4), -- IOM Port Reference Clock B internal (5) -- Internal Free Running Clock } ACCESS read-write STATUS mandatory DESCRIPTION "The requested primary clock synchronization reference source." ::= { node 85 } nodePrimarySyncRefOperationalState OBJECT-TYPE SYNTAX INTEGER { externala (1), -- T1 Rate External Clock A externalb (2), -- T1 Rate External Clock B portrefa (3), -- IOM Port Reference Clock A portrefb (4), -- IOM Port Reference Clock B internal (5) -- Internal Free Running Clock } ACCESS read-only STATUS mandatory DESCRIPTION "The actual primary clock synchronization reference source." ::= { node 86 } nodeSecondarySyncRefAdminState OBJECT-TYPE SYNTAX INTEGER { externala (1), -- T1 Rate External Clock A externalb (2), -- T1 Rate External Clock B portrefa (3), -- IOM Port Reference Clock A portrefb (4), -- IOM Port Reference Clock B internal (5) -- Internal Free Running Clock } ACCESS read-write STATUS mandatory DESCRIPTION "The requested secondary clock synchronization reference source." ::= { node 87 } nodeSecondarySyncRefOperationalState OBJECT-TYPE SYNTAX INTEGER { externala (1), -- T1 Rate External Clock A externalb (2), -- T1 Rate External Clock B portrefa (3), -- IOM Port Reference Clock A portrefb (4), -- IOM Port Reference Clock B internal (5) -- Internal Free Running Clock } ACCESS read-only STATUS mandatory DESCRIPTION "The actual secondary clock synchronization reference source." ::= { node 88 } nodePrimaryPLLOperationalState OBJECT-TYPE SYNTAX INTEGER { active (1), -- Running and valid down (2) -- Not valid } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the primary synchronization PLL." ::= { node 89 } nodeSecondaryPLLOperationalState OBJECT-TYPE SYNTAX INTEGER { active (1), -- Running and valid down (2) -- Not valid } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the secondary synchronization PLL." ::= { node 90 } nodeExternalClockAOperationalState OBJECT-TYPE SYNTAX INTEGER { active (1), -- Valid ais (2), -- Detected AIS Alarm los (3) -- Detected Loss Of Signal } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the External Clock A reference." ::= { node 91 } nodeExternalClockBOperationalState OBJECT-TYPE SYNTAX INTEGER { active (1), -- Valid ais (2), -- Detected AIS Alarm los (3) -- Detected Loss Of Signal } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the External Clock B reference." ::= { node 92 } nodePortClockAOperationalState OBJECT-TYPE SYNTAX INTEGER { active (1), -- Valid down (2) -- Invalid } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the Port Clock A reference." ::= { node 93 } nodePortClockBOperationalState OBJECT-TYPE SYNTAX INTEGER { active (1), -- Valid down (2) -- Invalid } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the Port Clock B reference." ::= { node 94 } nodeExternalTimingSource OBJECT-TYPE SYNTAX INTEGER { externala (1), -- T1 Rate External Clock A externalb (2), -- T1 Rate External Clock B portrefa (3), -- IOM Port Reference Clock A portrefb (4), -- IOM Port Reference Clock B internal (5) -- Internal Free Running Clock } ACCESS read-write STATUS mandatory DESCRIPTION "The reference for the external timing output." ::= { node 95 } nodeSyncAutoRestore OBJECT-TYPE SYNTAX INTEGER { enable (1), -- Allow auto-restore disable(2) -- Do not allow auto-restore } ACCESS read-write STATUS mandatory DESCRIPTION "The configuration of the Synchronization Reference Auto Restoration function." ::= { node 96 } nodeExternalClockInterfaceType OBJECT-TYPE SYNTAX INTEGER { t1 (1), -- T1 rate W/W terminals e1bnc (2), -- E1 rate 75 ohm BNC e1ww (3) -- E1 rate W/W terminals } ACCESS read-only STATUS mandatory DESCRIPTION "The interface type of the External Clock references." ::= { node 97 } -- The Card Group -- -- The variables that manage intelligent cards (PP's, CP's, IOP's). -- For redundant pairs of cards, only the active card is managed. -- -- NOTE: The card group is currently only supported in the B-STDX 9000 platform. CardTypes ::= INTEGER { -- invalid (0), v35-6 (1), -- 6-port V.35 i/o card ft1-1-24 (2), -- 1-port 24-channel Fractional T1 fe1-1-30 (3), -- 1-port 30-channel Fractional E1 uio-6 (4), -- 6-port universal i/o card cp1 (5), -- Control Processor uio-8 (6), -- 8-port V.35 i/o card ft1-4-24 (7), -- 4-port 24-channel Fractional T1 fe1-4-30 (8), -- 4-port 30-channel Fractional E1 ft3-1 (9), -- 1-port Fractional T3 i/o card fe3-1 (10), -- 1-port Fractional E3 i/o card hssi-2 (11), -- HSSI i/o card dsx1-10 (12), -- 10-port DSX-1 card rs232-18 (13), -- 18-port X.21/V.24 I/O card, for STDX 3000/6000 only rs232-8 (14), -- 8-port X.21/V.24 I/O card, for STDX 3000/6000 only ut1-4-24 (15), -- 4-port 24-channel Un-Channelized T1 ue1-4-30 (16), -- 4-port 30-channel Un-Channelized E1 atmds3-1 (17), -- 1-port ATM DS3 UNI I/O card atme3-1 (18), -- 1-port ATM E3 UNI I/O card pri-4 (19), -- 4-port ISDN PRI I/O card e1-pri-4 (20), -- 4-port E1 PRI I/O card sft1-4-24 (21), -- 4-port short haul 24-channel Fractional T1 card sut1-4-24 (22), -- 4-port short haul 24-channel Un-Channelized T1 card st1-pri-4 (23), -- 4-port short haul PRI I/O card t1-atm (24), -- T1 ATM e1-atm (25), -- E1 ATM ads3-t3 (26), -- ATM DS3 T3 (topaz) ads3-e3 (27), -- ATM DS3 E3 (topaz) cbr-ds1-s-4 (28), -- 4-port CBR T1 structured card cbr-ds1-us-4 (29), -- 4-port CE T1 card cbr-e1-s-4 (30), -- 4-port CBR E1 structured card cbr-e1-us-4 (31), -- 4-port CE E1 card atmiwu-1 (32), -- 1-port ATM-IWU STM-1/STS-3c card toc3-atm-4 (33), -- 4-port Topaz OC3c/STM1 ATM card tstm1-atm-4 (34), -- 4-port Topaz STM1 ATM card (OBSOLETE code) sp-4 (35), -- 4x4 switching processor (new terminology is "sp-10") sp-8 (36), -- 8x8 switching processor (new terminology is "sp-20") atmcs-1 (37), -- 1-port ATM-CS card (siemens) toc12-atm-1 (38), -- 1-port Topaz OC12c/STM4 ATM card tstm4-atm-1 (39), -- 1-port Topaz STM4 ATM card (OBSOLETE code) ads1-t1 (40), -- Topaz 8 port T1 ATM ads1-e1 (41), -- Topaz 8 port E1 ATM ads1-j2 (42), -- Topaz 8 port J2 ATM e1-12 (43), -- 12-port E1 i/o card bio1_4_16 (44), -- Garnet BIO1 4 PHY sub-cards 16 ports bio1_oc3_4 (45), -- Garnet BIO1 OC3 PHY sub-card 4 ports bio1_oc12_1 (46), -- Garnet BIO1 OC12 PHY sub-card 1 port bio1_oc12x4 (47), -- Garnet BIO1 OC12x4 PHY sub-card 1 port 4 channels bio1_oc48_1 (48), -- Garnet BIO1 OC48 PHY sub-card 1 port np1 (49), -- Garnet Node Processor card sf1 (50), -- Garnet Switch Fabric card tm1 (51), -- Garnet Timing Module card tfds3-t3-6 (52), -- 6-port Topaz DS3 T3 Ultracore card tfds3-e3-6 (53), -- 6-port Topaz DS3 E3 Ultracore card tfast-ether-4 (54), -- 4-port Topaz Fast Ethernet Ultracore card fast-ether-2 (55), -- 2-port BSTDX Fast Ethernet Ultracore card ls-oc3-1 (56), -- 1-port BSTDX OC3c/STM-1 Ultracore card tcfds3-t3-6 (57), -- 6-port Topaz Cell Frame Cell DS3 T3 Ultracore card tcfds3-e3-6 (58), -- 6-port Topaz Cell Frame Cell DS3 E3 Ultracore card toc3-cfc-2 (59), -- 2-port Topaz Cell Frame Cell OC3c/STM-1 Ultracore card atmcs-e3-1 (60), -- 1-port ATM-CS-E3 card (siemens) -- (61) is reserved be1-atm-12 (62), -- 12-port BSTDX E1 ATM card bt1-atm-12 (63), -- 12-port BSTDX T1 ATM card bds3-1-0 (64), -- 1 port BSTDX Channelized 3/1/0 gfether-4 (65), -- Granite Topaz Fast Ethernet UC card gfds3-t3-6 (66), -- Granite Topaz Frame DS3 UC card gfds3-e3-6 (67), -- Granite Topaz Frame E3 UC card gchn-ds3-4 (68), -- Granite Topaz Channalized DS3 card g-server (69), -- Granite Topaz Server card sp-30 (70), -- 8x8 sp with new PTS sp-40 (71) -- 8x8 sp with new PTS and more memory } CardStatuses ::= INTEGER { -- invalid (0), up (1), down (2), testing (3), maintenance (6), overtemp (7) } cardNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of manageable cards physically present in this node. Standby cards are not considered manageable." ::= { card 1} cardTable OBJECT-TYPE SYNTAX SEQUENCE OF CardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of cardEntry's. The number of entries is given by the value of cardNumber" ::= { card 2} CardEntry ::= SEQUENCE { cardLogicalSlotId INTEGER, cardPhysicalSlotId INTEGER, cardAdminType CardTypes, cardOperType CardTypes, cardState INTEGER, cardAdminStatus CardStatuses, cardOperStatus CardStatuses, cardDiagStatus INTEGER, cardRedundConfig INTEGER, cardRedundSlotMask INTEGER, cardRedundActual INTEGER, cardRedundState INTEGER, cardToRedundant TimeTicks, cardDiagNonFatalSource INTEGER, cardDiagNonFatalTime TimeTicks, cardDiagNonFatalErrMajor INTEGER, cardDiagNonFatalErrMinor INTEGER, cardDiagNonFatalStr DisplayString, cardDiagFatalSource INTEGER, cardDiagFatalTime TimeTicks, cardDiagFatalErrMajor INTEGER, cardDiagFatalErrMinor INTEGER, cardDiagFatalStr DisplayString, cardDiagFatalReboots Counter, cardDiagFatalAddress INTEGER, cardDiagBackgroundPasses Counter, cardDiagBackgroundFailures Counter, cardDiagBackgroundSuccesses Counter, cardDiagLEDReset INTEGER, cardDiagPowerExtensive INTEGER, cardCpuUtil Gauge, cardMemoryUsage Gauge, cardMaxVCs Gauge, cardInUseVCs Gauge, cardFreeVCs Gauge, cardInOctets Counter, cardInPkts Counter, cardOutOctets Counter, cardOutPkts Counter, cardToWarmboot TimeTicks, cardToColdboot TimeTicks, cardModel DisplayString, cardSerial DisplayString, cardSwRev DisplayString, cardHwRev DisplayString, cardEpromRev DisplayString, cardName DisplayString, cardCktGroupTrap OCTET STRING, cardOutBtus Counter, cardInGoodBtus Counter, cardInErrorBtus Counter, cardInNoVcBtus Counter, cardInLinkDownBtus Counter, cardInNoBufferBtus Counter, cardInForwardBitBtus Counter, cardDiagTestId INTEGER, cardDiagTestRuns INTEGER, cardDiagState INTEGER, cardDiagOptionStr OCTET STRING, cardDiagPasses Counter, cardDiagFailures Counter, cardDiagResultString DisplayString, cardFrameMemoryUtil Gauge, cardResetPram INTEGER, cardMemoryUtil Gauge, cardFrameMemoryUsage Gauge, cardUpTime TimeTicks, cardPramChecksum INTEGER, cardPhysicalIndex INTEGER, cardExternalClockRate INTEGER, cardShootState INTEGER, cardEraseAll INTEGER, cardAdminCapability INTEGER, cardOperCapability INTEGER, cardISDNswtype INTEGER, cardCpuFgUtil Gauge, cardTrkProtState INTEGER, cardISDNSigType INTEGER, cardISDNChanId INTEGER, cardTransmitClockConfig INTEGER, cardTransmitClockSwitchOver INTEGER, cardTransmitClockStatus INTEGER, cardSystemPrimaryClockPortConfig INTEGER, cardSystemPrimaryClockStatus INTEGER, cardSystemSecondaryClockPortConfig INTEGER, cardSystemSecondaryClockStatus INTEGER, cardInCells Counter, cardInErrorCells Counter, cardInErrorVPIVCI Counter, cardOutCells Counter, cardOutDiscardCells Counter, cardQOSQueueSize INTEGER, cardLastErrorPort INTEGER, cardLastErrorVPI INTEGER, cardLastErrorVCI INTEGER, cardSystemPrimaryClockModeConfig INTEGER, cardSystemSecondaryClockModeConfig INTEGER, cardNFBDEStatus INTEGER, cardProductCode DisplayString, cardMfgPN DisplayString, cardTotalUpTime TimeTicks, cardIOAType INTEGER, cardIOAHwRev DisplayString, cardIOASerial DisplayString, cardIOAProductCode DisplayString, cardIOAMfgPN DisplayString, cardDS0Support INTEGER, cardDiagParamId INTEGER, cardDiagParamValue INTEGER, cardBulkStatsPeakCapability INTEGER, cardBulkStatsTotalCapability INTEGER, cardBulkStatsPeakEnable INTEGER, cardBulkStatsTotalEnable INTEGER, cardBulkStatsBaseCollectPeriod INTEGER, cardNrtsHwRev INTEGER, cardNrtsOutCellBufSize INTEGER, cardNrtsOperState INTEGER, cardNrtsAdminState INTEGER, cardNrtsCcrmProtocolId INTEGER, cardNrtsBcmProtocolId INTEGER, cardNrtsRmGenInterval INTEGER, cardNrtsIdleCktThresh INTEGER, cardNrtsVbrNrtManage INTEGER, cardNrtsIcrFact INTEGER, cardNrtsMcastDiscardThresh INTEGER, cardNrtsMcastDiscardCount Counter, cardAdminIOAType INTEGER, cardNrtsMcastRate INTEGER, cardMonStatus INTEGER, cardImageSetA DisplayString, cardImageSetB DisplayString, cardMacAddress DisplayString, cardFlashRev DisplayString, cardRequiredCapabilityBitmask INTEGER, cardOperCapabilityBitmask INTEGER, cardDslModule OCTET STRING, cardIPTableSize INTEGER, cardIPTableState INTEGER, cardATMTcaInBufOverflowAlertPeriod INTEGER, cardATMTcaInBufOverflowThresh INTEGER, cardATMTcaInInvalidVpiVciAlertPeriod INTEGER, cardATMTcaInInvalidVpiVciThresh INTEGER, cardATMTcaInATMDCFullAlertPeriod INTEGER, cardATMTcaInATMDCFullThresh INTEGER, cardATMTcaEnable INTEGER, cardATMTcaId INTEGER, cardATMTcaECidLookupFailureAlertPeriod INTEGER, cardATMTcaECidLookupThresh INTEGER, cardATMTcaSPPearlOCbrFailureAlertPeriod INTEGER, cardATMTcaSPPearlOCbrThresh INTEGER, cardATMTcaSPPearlOAbrFailureAlertPeriod INTEGER, cardATMTcaSPPearlOAbrThresh INTEGER, cardATMTcaSPPearlOVbr1FailureAlertPeriod INTEGER, cardATMTcaSPPearlOVbr1Thresh INTEGER, cardATMTcaSPPearlOVbr2FailureAlertPeriod INTEGER, cardATMTcaSPPearlOVbr2Thresh INTEGER, cardATMTcaSPPearlGCbrFailureAlertPeriod INTEGER, cardATMTcaSPPearlGCbrThresh INTEGER, cardATMTcaSPPearlGAbrFailureAlertPeriod INTEGER, cardATMTcaSPPearlGAbrThresh INTEGER, cardATMTcaSPPearlGVbr1FailureAlertPeriod INTEGER, cardATMTcaSPPearlGVbr1Thresh INTEGER, cardATMTcaSPPearlGVbr2FailureAlertPeriod INTEGER, cardATMTcaSPPearlGVbr2Thresh INTEGER, cardATMTcaSPEnable INTEGER, cardSPEFCIEnable INTEGER, cardSPClpEnable INTEGER, spATMTcaId INTEGER, cardSubcardToRedundant CardTypes, cardMemory5Usage Gauge, cardSF1OperStatus CardStatuses, cardSF2OperStatus CardStatuses, cardTM1OperStatus CardStatuses, cardTM2OperStatus CardStatuses, cardMemStartLog INTEGER, cardMemLogLevel INTEGER, cardMemClrLog INTEGER, cardValidSubcards INTEGER, cardClp0CbrThreshold INTEGER, cardClp01CbrThreshold INTEGER, cardClp0VbrRtThreshold INTEGER, cardClp01VbrRtThreshold INTEGER, cardClp0VbrNrtThreshold INTEGER, cardClp01VbrNrtThreshold INTEGER, cardClp0UAbrThreshold INTEGER, cardClp01UAbrThreshold INTEGER, cardControlMessagesFromBus Counter, cardControlMessagesToBus Counter, cardBTUsFromBus Counter, cardBTUsToBus Counter, cardInvalidPvcBTUs Counter, cardIncompleteFramesFromBus Counter, cardBTUsBusErrors Counter, cardBTUsNoResource Counter, cardInvalidPvcBTUsThreshold INTEGER, cardIncompleteFramesFromBusThreshold INTEGER, cardBTUsBusErrorThreshold INTEGER, cardBTUsNoResourceThreshold INTEGER, cardFrameMemoryThreshold INTEGER, cardHoldQFrameMemory Counter, cardTotalAAL5RxErrorCount Counter, cardOperMemSize INTEGER } cardEntry OBJECT-TYPE SYNTAX CardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The card entry contains objects relevant to managing intelligent cards." INDEX { cardLogicalSlotId, cardRedundState } ::= { cardTable 1} cardLogicalSlotId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The logical slot number of this card. This is used as an index for the cardTable. In redundant configurations, this can be the physical slot number of either redundant card. In non redundant configurations, this is the same as cardPhysicalSlotId." ::= { cardEntry 1} cardPhysicalSlotId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical slot number of this card. This can be different from cardLogicalSlotId in redundant configurations." ::= { cardEntry 2} cardAdminType OBJECT-TYPE SYNTAX CardTypes ACCESS read-write STATUS mandatory DESCRIPTION "The desired card type." ::= { cardEntry 3} cardOperType OBJECT-TYPE SYNTAX CardTypes ACCESS read-only STATUS mandatory DESCRIPTION "The actual card type." ::= { cardEntry 4} cardState OBJECT-TYPE SYNTAX INTEGER { -- unknown (0), present (1), loading (2), start (3), init (4), sync (5), syncdone (6), ready (7), active (8), stopped (9), down (10), debug (11), offlinediag (12) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of this card." ::= { cardEntry 5} cardAdminStatus OBJECT-TYPE SYNTAX CardStatuses ACCESS read-write STATUS mandatory DESCRIPTION "The desired status of this card." ::= { cardEntry 6} cardOperStatus OBJECT-TYPE SYNTAX CardStatuses ACCESS read-only STATUS mandatory DESCRIPTION "The current status of this card." ::= { cardEntry 7} cardDiagStatus OBJECT-TYPE SYNTAX INTEGER { -- unknown (0), ok (1), marginal (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current diagnostics status of this card, as determined by background diagnostics." ::= { cardEntry 8} cardRedundConfig OBJECT-TYPE SYNTAX INTEGER { -- none (0), configured (1) } ACCESS read-only STATUS mandatory DESCRIPTION "Is the card configured for redundancy?" ::= { cardEntry 9} cardRedundSlotMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A 32-bit mask indicating the slot position of this card and its redundant partner. The low bit is slot 1 and the high bit is slot 32." ::= { cardEntry 10} cardRedundActual OBJECT-TYPE SYNTAX INTEGER { connected (1), not-connected (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is the card currently connected to a redundant card?" ::= { cardEntry 11} cardRedundState OBJECT-TYPE SYNTAX INTEGER { active (1), standby (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current redundancy state of this card. Exception: when used as an index for the following objects: cardAdminType, cardAdminCapability, and cardAdminStatus, the value 1 indicates the card of the redundant pair in the lower-numbered slot, and the value 2 indicates the card in the higher-numbered slot." ::= { cardEntry 12} cardToRedundant OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Instructs the standby card to reset the active card and take over as new active card. The reset takes place after specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled request." ::= { cardEntry 13} cardDiagNonFatalSource OBJECT-TYPE SYNTAX INTEGER { power-on-diagnostics (1), background-diagnostics (2), fault (3), frame-heap (4), redundancy (5), system-level (6), card-level (7), i960-data-structures (8), general (9), data-alignment (10), device-driver-level (11) } ACCESS read-only STATUS mandatory DESCRIPTION "Source who reported last non-fatal error." ::= { cardEntry 14 } cardDiagNonFatalTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Time the last non-fatal error was reported." ::= { cardEntry 15 } cardDiagNonFatalErrMajor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Major error code of last non-fatal error." ::= { cardEntry 16 } cardDiagNonFatalErrMinor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Minor error code of last non-fatal error." ::= { cardEntry 17 } cardDiagNonFatalStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Ascii string describing last non-fatal error." ::= { cardEntry 18 } cardDiagFatalSource OBJECT-TYPE SYNTAX INTEGER { power-on-diagnostics (1), background-diagnostics (2), fault (3), frame-heap (4), redundancy (5), system-level (6), card-level (7), i960-data-structures (8), general (9), data-alignment (10), device-driver-level (11) } ACCESS read-only STATUS mandatory DESCRIPTION "Source who reported last fatal error." ::= { cardEntry 19 } cardDiagFatalTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Time the last fatal error was reported." ::= { cardEntry 20 } cardDiagFatalErrMajor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Major error code of last fatal error." ::= { cardEntry 21 } cardDiagFatalErrMinor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Minor error code of last fatal error." ::= { cardEntry 22 } cardDiagFatalStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Ascii string describing last fatal error." ::= { cardEntry 23 } cardDiagFatalReboots OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the switch has re-booted since last fatal error was reported." ::= { cardEntry 24 } cardDiagFatalAddress OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Address switch was executing when it encountered fatal error." ::= { cardEntry 25 } cardDiagBackgroundPasses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of passes made by the background diagnostics." ::= { cardEntry 26 } cardDiagBackgroundFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of failures discovered by background diagnostics." ::= { cardEntry 27 } cardDiagBackgroundSuccesses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of successful passes by background diagnostics." ::= { cardEntry 28 } cardDiagLEDReset OBJECT-TYPE SYNTAX INTEGER { -- state-unchanged (0), state-to-active (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Change the card state from marginal to active. Change the LED from yellow to green." ::= { cardEntry 29 } cardDiagPowerExtensive OBJECT-TYPE SYNTAX INTEGER { -- fast-tests (0), extensive-tests (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Should power on diagnostics do slower, extensive testing, or fast testing?" ::= { cardEntry 30 } cardCpuUtil OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The CPU utilization percentage for packet processing on this intelligent card." ::= { cardEntry 31 } cardMemoryUsage OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The memory utilization, in terms of free bytes, for this intelligent card." ::= { cardEntry 32 } cardMaxVCs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of available VC entries on this card." ::= { cardEntry 33 } cardInUseVCs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of currently in use VC entries on this card." ::= { cardEntry 34 } cardFreeVCs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of currently free VC entries on this card." ::= { cardEntry 35 } cardInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets received on this card, including framing bytes." ::= { cardEntry 36 } cardInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received on this card." ::= { cardEntry 37 } cardOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets transmitted out of this card, including framing bytes." ::= { cardEntry 38 } cardOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets requested to be transmitted out of this card, including those that were discarded or not sent." ::= { cardEntry 39 } cardToWarmboot OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Warm boots the card after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled re-boot request." ::= { cardEntry 40 } cardToColdboot OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Cold boots the card after the specified time ticks have elapsed. A value of 0 indicates cancellation of the previously scheduled re-boot request." ::= { cardEntry 41 } cardModel OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The part number of the card." ::= { cardEntry 42 } cardSerial OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the card." ::= { cardEntry 43 } cardSwRev OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The software rev number (major.minor)." ::= { cardEntry 44 } cardHwRev OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The hardware rev number (major.minor)." ::= { cardEntry 45 } cardEpromRev OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The EPROM firmware rev number (major.minor)." ::= { cardEntry 46 } cardName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The name of this card" ::= { cardEntry 47 } cardCktGroupTrap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is a ( 4 + n*134 ) byte octet string where n => 1. The first and second byte is the interface/slot id of the link/IOP going down or link goes up. The third byte is the reason why circuits go down: 1 is a user link goes down, 2 is a trunk link goes down, 3 is an IOP goes down and 4 is an user link goes up The fourth byte is the count of entries in the following circuit bit map array. Each circuit bit map entry is 134 bytes. The first 2 bytes is the IOP slot on which dlci's are defined. The second 2 bytes is the Physical port ID on which dlci's are defined. The third 2 bytes is the interface id on which dlci's are defined. The following 128 bytes (1024 bits) is a bit map for dlci's defined on the interface. The left-most bit of the first byte represent dlci 0 and the right-most bit of the 128th byte represent dlci 1023. If a bit is set, it means the corresponding dlci on that interface is up/down." ::= { cardEntry 48 } cardOutBtus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of bus transfer units sent by this card." ::= { cardEntry 49 } cardInGoodBtus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of good bus transfer units received by this card." ::= { cardEntry 50 } cardInErrorBtus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of bus transfer units received with errors." ::= { cardEntry 51 } cardInNoVcBtus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of bus transfer units discarded because no circuit was found." ::= { cardEntry 52 } cardInLinkDownBtus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of bus transfer units discarded because the outgoing link was inactive." ::= { cardEntry 53 } cardInNoBufferBtus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of bus transfer units discarded because no buffer was available." ::= { cardEntry 54 } cardInForwardBitBtus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of bus transfer units discarded because the circuit forward bit was off." ::= { cardEntry 55 } cardDiagTestId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Identification of the diagnostics tests to be run." ::= { cardEntry 56 } cardDiagTestRuns OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of passes of the diagnostics tests to be run. The default value is 1." ::= { cardEntry 57 } cardDiagState OBJECT-TYPE SYNTAX INTEGER { -- inactive (0), active(1) } ACCESS read-write STATUS mandatory DESCRIPTION "The current state of the foreground diagnostics on this card." ::= { cardEntry 58 } cardDiagOptionStr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Optional parameters to the diagnostic." ::= { cardEntry 59 } cardDiagPasses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of successful diagnostic passes." ::= { cardEntry 60 } cardDiagFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of failed diagnostic passes." ::= { cardEntry 61 } cardDiagResultString OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of last diagnostic failure." ::= { cardEntry 62 } cardFrameMemoryUtil OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The percentage of frame memory utilization on this intelligent card." ::= { cardEntry 63 } cardResetPram OBJECT-TYPE SYNTAX INTEGER { reset-pram (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this to 1 causes a reset of PRAM on the corresponding card." ::= { cardEntry 64 } cardMemoryUtil OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The percentage of system memory utilization on this intelligent card." ::= { cardEntry 65 } cardFrameMemoryUsage OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The frame memory utilization, in terms of free bytes, for this intelligent card." ::= { cardEntry 66 } cardUpTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time (in hundredths of a second) since this card was last booted." ::= { cardEntry 67 } cardPramChecksum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The PRAM checksum for this card." ::= { cardEntry 68 } cardPhysicalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The physical slot id of this card." ::= { cardEntry 69 } cardExternalClockRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The external clock rate for DSX1, T1 and E1 cards. The value is specified in units of 8KHz and can range from 1 to 255." ::= { cardEntry 70 } cardShootState OBJECT-TYPE SYNTAX INTEGER { -- shoot-disabled (0), shoot-enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether the system monitor on the CP should shoot this card if it's unreachable. The default is enabled. The card index used in the binding refers to a physical card." ::= { cardEntry 71 } cardEraseAll OBJECT-TYPE SYNTAX INTEGER { erase-all (1) } ACCESS read-write STATUS mandatory DESCRIPTION "When set to 1, erases program flash and PRAM on specified card." ::= { cardEntry 72 } cardAdminCapability OBJECT-TYPE SYNTAX INTEGER { iop-frame-relay (1), iop-multi-service (2), iop-16meg-service (3), cp-basic (4), cp-30 (5), cp-plus (8), cp-40 (9), cp-50 (10), iom-fcp (11) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired capability of the card" ::= { cardEntry 73 } cardOperCapability OBJECT-TYPE SYNTAX INTEGER { iop-frame-relay (1), iop-multi-service (2), iop-16meg-service (3), cp-basic (4), cp-30 (5), cp-plus (8), cp-40 (9), cp-50 (10), iom-fcp (11) } ACCESS read-only STATUS mandatory DESCRIPTION "The actual capability of the card" ::= { cardEntry 74 } cardISDNswtype OBJECT-TYPE SYNTAX INTEGER { att-4ess (1), att-5ess (2), dms100 (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the ISDN central office switch type for the card." ::= { cardEntry 75 } cardCpuFgUtil OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The CPU foreground utilization percentage for packet processing on this intelligent card." ::= { cardEntry 76 } cardTrkProtState OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for issue of Link Trunk Protocol request frames. If set to disabled, the issue of trunk protocol requests is blocked for all trunks on this card." ::= { cardEntry 77 } cardISDNSigType OBJECT-TYPE SYNTAX INTEGER { no-nfas (1), nfas (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether the ISDN Signalling type is Associated or Non-Facility Associated Signalling" ::= { cardEntry 78 } cardISDNChanId OBJECT-TYPE SYNTAX INTEGER { exclusive (1), preferred (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether Channel ID assignment is performed by the central office switch or the 9000 - Exclusive (central office) Preferred (9000)" ::= { cardEntry 79 } cardTransmitClockConfig OBJECT-TYPE SYNTAX INTEGER { system-primary-clock (1), system-secondary-clock (2), system-primary-secondary-clock (3), free-running-clock (4), e1-G703sec10-clock (5), e1-network-clock (6) } ACCESS read-write STATUS mandatory DESCRIPTION "The transmit clock source for timing section of the card" ::= { cardEntry 80 } cardTransmitClockSwitchOver OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable automatic transmit clock source switch-over once a failed clock reference has recovered." ::= { cardEntry 81 } cardTransmitClockStatus OBJECT-TYPE SYNTAX INTEGER { in-synchronization (1), loss-of-synchronization (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The transmit clock PLL synchronization status of the card" ::= { cardEntry 82 } cardSystemPrimaryClockPortConfig OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The port number (1-x) on the card that specifies the system primary clock source. A zero specifies no port" ::= { cardEntry 83 } cardSystemPrimaryClockStatus OBJECT-TYPE SYNTAX INTEGER { normal (1), failure (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The system primary clock status as detected on the card. On the BIO, this refers to the Timing Module 1 clock status as detected by the BIO." ::= { cardEntry 84 } cardSystemSecondaryClockPortConfig OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The port number (1 to x) on the card that specifies the system secondary clock source. A zero specifies no port" ::= { cardEntry 85 } cardSystemSecondaryClockStatus OBJECT-TYPE SYNTAX INTEGER { normal (1), failure (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The system secondary clock status as detected on the card. On the BIO, this refers to the Timing Module 2 clock status as detected by the BIO." ::= { cardEntry 86} cardInCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of cells received on this card." ::= { cardEntry 87 } cardInErrorCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of cells received on this card with HEC error." ::= { cardEntry 88 } cardInErrorVPIVCI OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of cells received with HEC invalid VPI, VCI." ::= { cardEntry 89 } cardOutCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of cells transmitted out of this card" ::= { cardEntry 90 } cardOutDiscardCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of cells discarded due to congestion on this card" ::= { cardEntry 91 } cardQOSQueueSize OBJECT-TYPE SYNTAX INTEGER { cell-8K (1), cell-24K (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The ATM QOS queue size (per cell) of each port on the card" ::= { cardEntry 92 } cardLastErrorPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number (1 to x) of the last cell with invalid cell header on the card" ::= { cardEntry 93 } cardLastErrorVPI OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VPI of the last cell with invalid cell header on the card" ::= { cardEntry 94 } cardLastErrorVCI OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VCI of the last cell with invalid cell header on the card" ::= { cardEntry 95 } cardSystemPrimaryClockModeConfig OBJECT-TYPE SYNTAX INTEGER { line-rate (1), plcp-mode (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The system primary clock mode. PLCP is for DS3 port only" ::= { cardEntry 96 } cardSystemSecondaryClockModeConfig OBJECT-TYPE SYNTAX INTEGER { line-rate (1), plcp-mode (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The system secondary clock mode. PLCP is for DS3 port only" ::= { cardEntry 97 } cardNFBDEStatus OBJECT-TYPE SYNTAX INTEGER { cleared (1), not-cleared (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Non Fatal Background Diagnostic Error Status" ::= { cardEntry 98 } cardProductCode OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This card's product code." ::= { cardEntry 99 } cardMfgPN OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This card's manufacturing part number." ::= { cardEntry 100 } cardTotalUpTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "This card's total accumulated up time, in hours." ::= { cardEntry 101 } cardIOAType OBJECT-TYPE SYNTAX INTEGER { spa (1), -- Topaz SPA, redundant toc3-4 (2), -- Topaz OC3/STM1 MM 4-port SC, non-redundant tstm1-4 (3), -- Topaz STM-1 MM 4-port SC, non-redundant OBSOLETE, use (2) tds3-8 (4), -- Topaz DS3 8-port, non-redundant te3-8 (5), -- Topaz E3 8-port, non-redundant toc3-smfir-n-4 (6), -- Topaz OC3/STM1 SMF, intermediate reach, 4-port SC, non-redundant toc3-smfir-r-4 (7), -- Topaz OC3/STM1 SMF, intermediate reach, 4-port SC, redundant toc3-mm-r-4 (8), -- Topaz OC3/STM1 MM, 4-port SC, redundant toc3-smflr-n-4 (9), -- Topaz OC3/STM1 SMF, long reach, 4-port SC, non-redundant toc3-smflr-r-4 (10), -- Topaz OC3/STM1 SMF, long reach, 4-port SC, redundant tstm1-smfir-n-4 (11), -- Topaz STM-1 SMF, intermediate reach, 4-port SC, non-redundant OBSOLETE, use (6) tstm1-smfir-r-4 (12), -- Topaz STM-1 SMF, intermediate reach, 4-port SC, redundant OBSOLETE, use (7) tstm1-mm-r-4 (13), -- Topaz STM-1 MM, 4-port SC, redundant OBSOLETE, use (8) tstm1-smflr-n-4 (14), -- Topaz STM-1 SMF, long reach, 4-port SC, non-redundant OBSOLETE, use (9) tstm1-smflr-r-4 (15), -- Topaz STM-1 SMF, long reach, 4-port SC, redundant OBSOLETE, use (10) tds3-r-8 (16), -- Topaz DS3 8-port, redundant te3-r-8 (17), -- Topaz E3 8-port, redundant hssi-n (18), -- BSTDX HSSI non-redundant IOA hssi-r (19), -- BSTDX HSSI redundant IOA toc12-smf-n-1(21), -- Topaz OC12/STM4 SMF non-redundant IOA tads1-t1-n-8 (22), -- Topaz T1 ATM - T1 non-redundant IOA tads1-t1-r-8 (23), -- Topaz T1 ATM - T1 redundant IOA tads1-e1-75-n-8 (24), -- Topaz T1 ATM - E1 75 ohm non-redund IOA tads1-e1-75-r-8 (25), -- Topaz T1 ATM - E1 75 ohm redundant IOA tads1-e1-120-n-8 (26), -- Topaz T1 ATM - E1 120 ohm non-red IOA tads1-e1-120-r-8 (27), -- Topaz T1 ATM - E1 120 ohm redundant IOA tads1-j2-75-n-8 (28), -- Topaz T1 ATM - J2 75 ohm non-red IOA tads1-j2-75-r-8 (29), -- Topaz T1 ATM - J2 75 ohm redundant IOA tads1-j2-120-n-8 (30), -- Topaz T1 ATM - J2 120 ohm non-red IOA tads1-j2-120-r-8 (31), -- Topaz T1 ATM - J2 120 ohm redundant IOA bCS-DS3-n-1 (35), -- BSTDX DS3 (CS) non redundant IOA bCS-DS3-r-1 (36), -- BSTDX DS3 (CS) redundant IOA bIWU-OC3-mm-n-1 (37), -- BSTDX OC3 (IWU) multimode non redundant IOA bIWU-OC3-smfir-n-1 (38), -- BSTDX OC3 (IWU) single mode intermediate reach non-redundant IOA toc3-stm1copper-n-4 (39), -- Topaz OC3/STM1 Copper, 4-port SC, non-redundant toc3-stm1copper-r-4 (40), -- Topaz OC3/STM1 Copper, 4-port SC, redundant spa-universal (32), -- Topaz Universal SPA (E1/T1) nplus1-chassis (41), -- N+1 Chassis Indicator toc12-smflr-n-1(42), -- Topaz OC12/STM4 SMF long reach non-redundant IOA npa-universal (43), -- Garnet Universal NPA bIWU-OC3-bumm-1 (44), -- BSTDX OC3 (IWU) base unit multimode redundant IOA bIWU-OC3-bumm-smfir-1 (45), -- BSTDX OC3 (IWU) base unit single mode intermediate reach redundant IOA bIWU-OC3-trm-mm-1 (46), -- BSTDX OC3 (IWU) tranceiver module multimode redundant IOA bIWU-OC3-trm-smfir-1 (47), -- BSTDX OC3 (IWU) tranceiver module single mode intermediate reach redundant IOA uio-v35 (48), -- BSTDX UIO-V35 IOA uio-x21 (49), -- BSTDX UIO-X21 IOA bds1-e1-bnc-n-12 (50), -- BSTDX 12 port - E1 75 ohm non-redund IOA bds1-e1-bnc-r-12 (51), -- BSTDX 12 port - E1 75 ohm redundant IOA bds1-e1-db15-n-12 (52), -- BSTDX 12 port - E1 120 ohm non-red IOA bds1-e1-db15-r-12 (53), -- BSTDX 12 port - E1 120 ohm redundant IOA bCS-E3-n-1 (54), -- BSTDX E3 (CS) non redundant IOA bCS-E3-r-1 (55), -- BSTDX E3 (CS) redundant IOA bCP-1-m (56), -- BSTDX CP redundant IOA with MIM bCP-1-o (57), -- BSTDX CP redundant IOA before MIM be1-atm-75-n-12 (58), -- BSTDX E1 ATM 75 ohm non-redundant be1-atm-75-r-12 (59), -- BSTDX E1 ATM 75 ohm redundant be1-atm-120-n-12 (60), -- BSTDX E1 ATM 120 ohm non-redundant be1-atm-120-r-12 (61), -- BSTDX E1 ATM 120 ohm redundant bt1-atm-100-n-12 (62), -- BSTDX T1 ATM 100 ohm non-redundant bt1-atm-100-r-12 (63), -- BSTDX T1 ATM 100 ohm redundant bds1-e1-rj48h-n-12 (64), -- BSTDX 12 port - E1 120 ohm RJ48 non-red IOA bds1-e1-rj48h-r-12 (65), -- BSTDX 12 port - E1 120 ohm RJ48 red IOA gx550-backplane (66), -- Garnet backplane MIM id cbx500-ether-n-4 (67), -- CBX500 4 port ethernet IOA, non-redund cbx500-ds3-n-6 (68), -- CBX500 6 port DS3 IOA, non-redund bstdx9000-ether-n-2 (69), -- BSTDX9000 2 port ethernet IOA, non-redund bio550-oc3-smfir (70), -- Garnet OC3 SMF IR bio550-oc3-smflr (71), -- Garnet OC3 SMF LR bio550-oc3-mmf (72), -- Garnet OC3 MMF bio550-oc12-smfir (73), -- Garnet OC12 SMF IR bio550-oc12-smflr (74), -- Garnet OC12 SMF LR bio550-oc12-mmf (75) -- Garnet OC12 MMF } ACCESS read-only STATUS mandatory DESCRIPTION "The type of IOA attached to this card." ::= { cardEntry 102 } cardIOAHwRev OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The attached IOA's hardware revision." ::= { cardEntry 103 } cardIOASerial OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The attached IOA's serial number." ::= { cardEntry 104 } cardIOAProductCode OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The attached IOA's product code." ::= { cardEntry 105 } cardIOAMfgPN OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The attached IOA's manufacturing part number." ::= { cardEntry 106 } cardDS0Support OBJECT-TYPE SYNTAX INTEGER { ds0-lpbk-not-supported (1), ds0-lpbk-supported (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Some B-Stdx T1 boards do not support lpbk." ::= { cardEntry 107 } cardDiagParamId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Parameter identifier for internal diagnostics." ::= { cardEntry 108 } cardDiagParamValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Value assigned to parameter specified by cardDiagParamId." ::= { cardEntry 109 } cardBulkStatsPeakCapability OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Configures capability to collect peak 5-minute statistics. Capability change takes effect upon IOM reboot." ::= { cardEntry 110 } cardBulkStatsTotalCapability OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Configures capability to collect total statistics. Capability change takes effect upon IOM reboot." ::= { cardEntry 111 } cardBulkStatsPeakEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Reflects the operational state of the peak 5-minute statistic collection on an IOM. For this setting to be enabled, the respective capability must be enabled." ::= { cardEntry 112 } cardBulkStatsTotalEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Reflects the operational state of the total statistic collection on an IOM. For this setting to be enabled, the respective capability must be enabled." ::= { cardEntry 113 } cardBulkStatsBaseCollectPeriod OBJECT-TYPE SYNTAX INTEGER (15..1440) ACCESS read-write STATUS mandatory DESCRIPTION "Configures base collection period for bulk statistics on an IOM in minutes. Only the following values are allowed: 15, 20, 30, 60, 120, 180, 240, 360, 720, 1440. The default value is 60." ::= { cardEntry 114 } cardNrtsHwRev OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Hardware revision of the NRTS processor." ::= { cardEntry 115 } cardNrtsOutCellBufSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of the NRTS output cell buffer." ::= { cardEntry 116 } cardNrtsOperState OBJECT-TYPE SYNTAX INTEGER { absent (1), down (2), up (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The operational status of the NRTS processor." ::= { cardEntry 117 } cardNrtsAdminState OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The admin status of the NRTS processor." ::= { cardEntry 118 } cardNrtsCcrmProtocolId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The protocol ID field for the CCRM cells. Must be different from the BCM protocol ID. Default is 6." ::= { cardEntry 119 } cardNrtsBcmProtocolId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The protocol ID field for the BCM cells. Must be different from the CCRM protocol ID. Default is 5." ::= { cardEntry 120 } cardNrtsRmGenInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The RM cell generation interval in ms. Minimum is 30, maximum is 250, default is 100." ::= { cardEntry 121 } cardNrtsIdleCktThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of RM cell generation intervals with no cell reception upon which the circuit is declared idle. Minimum is 1, maximum is 8, default is 8." ::= { cardEntry 122 } cardNrtsVbrNrtManage OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether VBR NRT traffic should be managed by the NRTS processor." ::= { cardEntry 123 } cardNrtsIcrFact OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A factor used to calculate the Initial Cell Rate for a circuit from its MCR and PCR." ::= { cardEntry 124 } cardNrtsMcastDiscardThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A NRTS discard threshold for the multicast circuits." ::= { cardEntry 125 } cardNrtsMcastDiscardCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A NRTS discard counter for the multicast circuits." ::= { cardEntry 126 } cardAdminIOAType OBJECT-TYPE SYNTAX INTEGER { spa (1), -- Topaz SPA, redundant toc3-4 (2), -- Topaz OC3/STM1 MM 4-port SC, non-redundant tstm1-4 (3), -- Topaz STM-1 MM 4-port SC, non-redundant OBSOLETE, use (2) tds3-8 (4), -- Topaz DS3 8-port, non-redundant te3-8 (5), -- Topaz E3 8-port, non-redundant toc3-smfir-n-4 (6), -- Topaz OC3/STM1 SMF, intermediate reach, 4-port SC, non-redundant toc3-smfir-r-4 (7), -- Topaz OC3/STM1 SMF, intermediate reach, 4-port SC, redundant toc3-mm-r-4 (8), -- Topaz OC3/STM1 MM, 4-port SC, redundant toc3-smflr-n-4 (9), -- Topaz OC3/STM1 SMF, long reach, 4-port SC, non-redundant toc3-smflr-r-4 (10), -- Topaz OC3/STM1 SMF, long reach, 4-port SC, redundant tstm1-smfir-n-4 (11), -- Topaz STM-1 SMF, intermediate reach, 4-port SC, non-redundant OBSOLETE, use (6) tstm1-smfir-r-4 (12), -- Topaz STM-1 SMF, intermediate reach, 4-port SC, redundant OBSOLETE, use (7) tstm1-mm-r-4 (13), -- Topaz STM-1 MM, 4-port SC, redundant OBSOLETE, use (8) tstm1-smflr-n-4 (14), -- Topaz STM-1 SMF, long reach, 4-port SC, non-redundant OBSOLETE, use (9) tstm1-smflr-r-4 (15), -- Topaz STM-1 SMF, long reach, 4-port SC, redundant OBSOLETE, use (10) tds3-r-8 (16), -- Topaz DS3 8-port, redundant te3-r-8 (17), -- Topaz E3 8-port, redundant hssi-n (18), -- BSTDX HSSI non-redundant IOA hssi-r (19), -- BSTDX HSSI redundant IOA toc12-smf-n-1(21), -- Topaz OC12/STM4 SMF non-redundant IOA tads1-t1-n-8 (22), -- Topaz T1 ATM - T1 non-redundant IOA tads1-t1-r-8 (23), -- Topaz T1 ATM - T1 redundant IOA tads1-e1-75-n-8 (24), -- Topaz T1 ATM - E1 75 ohm non-redund IOA tads1-e1-75-r-8 (25), -- Topaz T1 ATM - E1 75 ohm redundant IOA tads1-e1-120-n-8 (26), -- Topaz T1 ATM - E1 120 ohm non-red IOA tads1-e1-120-r-8 (27), -- Topaz T1 ATM - E1 120 ohm redundant IOA tads1-j2-75-n-8 (28), -- Topaz T1 ATM - J2 75 ohm non-red IOA tads1-j2-75-r-8 (29), -- Topaz T1 ATM - J2 75 ohm redundant IOA tads1-j2-120-n-8 (30), -- Topaz T1 ATM - J2 120 ohm non-red IOA tads1-j2-120-r-8 (31), -- Topaz T1 ATM - J2 120 ohm redundant IOA bCS-DS3-n-1 (35), -- BSTDX DS3 (CS) non redundant IOA bCS-DS3-r-1 (36), -- BSTDX DS3 (CS) redundant IOA bIWU-OC3-mm-n-1 (37), -- BSTDX OC3 (IWU) multimode non redundant IOA bIWU-OC3-smfir-n-1 (38), -- BSTDX OC3 (IWU) single mode intermediate reach non-redundant IOA toc3-stm1copper-n-4 (39), -- Topaz OC3/STM1 Copper, 4-port SC, non-redundant toc3-stm1copper-r-4 (40), -- Topaz OC3/STM1 Copper, 4-port SC, redundant spa-universal (32), -- Topaz Universal SPA (E1/T1) nplus1-chassis (41), -- N+1 Chassis Indicator toc12-smflr-n-1(42), -- Topaz OC12/STM4 SMF long reach non-redundant IOA npa-universal (43), -- Garnet Universal NPA bIWU-OC3-bumm-1 (44), -- BSTDX OC3 (IWU) base unit multimode redundant IOA bIWU-OC3-bumm-smfir-1 (45), -- BSTDX OC3 (IWU) base unit single mode intermediate reach redundant IOA bIWU-OC3-trm-mm-1 (46), -- BSTDX OC3 (IWU) tranceiver module multimode redundant IOA bIWU-OC3-trm-smfir-1 (47), -- BSTDX OC3 (IWU) tranceiver module single mode intermediate reach redundant IOA uio-v35 (48), -- BSTDX UIO-V35 IOA uio-x21 (49), -- BSTDX UIO-X21 IOA bds1-e1-bnc-n-12 (50), -- BSTDX 12 port - E1 75 ohm non-redund IOA bds1-e1-bnc-r-12 (51), -- BSTDX 12 port - E1 75 ohm redundant IOA bds1-e1-db15-n-12 (52), -- BSTDX 12 port - E1 120 ohm non-red IOA bds1-e1-db15-r-12 (53), -- BSTDX 12 port - E1 120 ohm redundant IOA bCS-E3-n-1 (54), -- BSTDX E3 (CS) non redundant IOA bCS-E3-r-1 (55), -- BSTDX E3 (CS) redundant IOA bCP-1-m (56), -- BSTDX CP redundant IOA with MIM bCP-1-o (57), -- BSTDX CP redundant IOA before MIM be1-atm-75-n-12 (58), -- BSTDX E1 ATM 75 ohm non-redundant be1-atm-75-r-12 (59), -- BSTDX E1 ATM 75 ohm redundant be1-atm-120-n-12 (60), -- BSTDX E1 ATM 120 ohm non-redundant be1-atm-120-r-12 (61), -- BSTDX E1 ATM 120 ohm redundant bt1-atm-100-n-12 (62), -- BSTDX T1 ATM 100 ohm non-redundant bt1-atm-100-r-12 (63), -- BSTDX T1 ATM 100 ohm redundant bds1-e1-rj48h-n-12 (64), -- BSTDX 12 port - E1 120 ohm RJ48 non-red IOA bds1-e1-rj48h-r-12 (65), -- BSTDX 12 port - E1 120 ohm RJ48 red IOA cbx500-ether-n-4 (67), -- CBX500 4 port ethernet IOA, non-redund cbx500-ds3-n-6 (68), -- CBX500 6 port DS3 IOA, non-redund bstdx9000-ether-n-2 (69), -- BSTDX9000 2 port ethernet IOA, non-redund bio550-oc3-smfir (70), -- Garnet OC3 SMF IR bio550-oc3-smflr (71), -- Garnet OC3 SMF LR bio550-oc3-mmf (72), -- Garnet OC3 MMF bio550-oc12-smfir (73), -- Garnet OC12 SMF IR bio550-oc12-smflr (74), -- Garnet OC12 SMF LR bio550-oc12-mmf (75) -- Garnet OC12 MMF } ACCESS read-write STATUS mandatory DESCRIPTION "The type of IOA attached to this card viewed from NMS." ::= { cardEntry 127 } cardNrtsMcastRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The NRTS shaping rate for multicast circuits as a fraction of the line rate." ::= { cardEntry 128 } cardMonStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), -- enable mon960 disable(2) -- disable mon960 } ACCESS read-write STATUS mandatory DESCRIPTION "Set MON960 status, default(1) -- enable, 2 -- disable." ::= { cardEntry 129 } cardImageSetA OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The details of Image Set A. The elements of each image are space delimited and include Part Number, Revision, Size and Description. The details of each image are linefeed delimited." ::= { cardEntry 130 } cardImageSetB OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The details of Image Set B. The elements of each image are space delimited and include Part Number, Revision, Size and Description. The details of each image are linefeed delimited." ::= { cardEntry 131 } cardMacAddress OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "ethernet MAC address of the card if there is an ethernet interface. Currently only CP cards may have ethernet. Cards without ethernet return 0 length octet string." ::= { cardEntry 132 } cardFlashRev OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The boot flash rev number." ::= { cardEntry 133 } cardRequiredCapabilityBitmask OBJECT-TYPE SYNTAX INTEGER { aps-one-plus-one-support (1), holdover-support (2), vp-shaping (4), fe-capability (8) } ACCESS read-only STATUS mandatory DESCRIPTION "Bitmask indicating this cards' required capabilities based on configured features. A bit is set to one if the corresponding capability is required. This variable is a bitmask so only power-of-2 values can be assigned (1,2,4,8,16,etc.) ." ::= { cardEntry 134 } cardOperCapabilityBitmask OBJECT-TYPE SYNTAX INTEGER { aps-one-plus-one-supported (1), holdover-supported (2), vp-shaping (4), fe-capability (8) } ACCESS read-only STATUS mandatory DESCRIPTION "Bitmask indicating this cards' actual capabilities. A bit is set to one if the corresponding capability is supported. This variable is a bitmask so only power-of-2 values can be assigned (1,2,4,8,16,etc.)." ::= { cardEntry 135 } cardDslModule OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This is for Dynamic Software Loadl You can type: ModuleName Version, ModuleName Version, ... to load modules." ::= { cardEntry 136 } cardIPTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of IP routing table entries supported by the card. If set to 0, routing table size is assumed unlimited." ::= { cardEntry 137 } cardIPTableState OBJECT-TYPE SYNTAX INTEGER { normal (1), marginal (2) } ACCESS read-only STATUS mandatory DESCRIPTION "State of the card's IP routing table. If set to marginal, the routing table maximum size has been exceeded. and all routes except management prefixes have been discarded." ::= { cardEntry 138 } cardATMTcaInBufOverflowAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca ingress buffer overflow alert period (in min)." DEFVAL { 15 } ::= { cardEntry 139 } cardATMTcaInBufOverflowThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca ingress buffer overflow threshold." DEFVAL { 1 } ::= { cardEntry 140 } cardATMTcaInInvalidVpiVciAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca ingress invalid vpi/vci alert period (in min)." DEFVAL { 15 } ::= { cardEntry 141 } cardATMTcaInInvalidVpiVciThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca ingress invalid vpi/vci threshold." DEFVAL { 1 } ::= { cardEntry 142 } cardATMTcaInATMDCFullAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca ingress ATM DC full alert period (in min)." DEFVAL { 15 } ::= { cardEntry 143 } cardATMTcaInATMDCFullThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca ingress ATM DC full threshold." DEFVAL { 1 } ::= { cardEntry 144 } cardATMTcaEnable OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca enable/disable." ::= { cardEntry 145 } cardATMTcaId OBJECT-TYPE SYNTAX INTEGER { ingressBufferOverfloeC (1), ingressInvalidVpiVciC (2), ingressATMDCFullC (3), ingressBufferMsbPaeC (4), ingressBufferHalfC (5), ingressBufferMsbPafC (6), egressCidLookupFailureC (7) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the the most recently declared card ATM threshold crossing alert" ::= { cardEntry 146 } cardATMTcaECidLookupFailureAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca ingress buffer overflow alert period (in min)." DEFVAL { 15 } ::= { cardEntry 147 } cardATMTcaECidLookupThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca ingress buffer overflow threshold." DEFVAL { 1 } ::= { cardEntry 148 } cardATMTcaSPPearlOCbrFailureAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl overflow CBR alert period (in min)." DEFVAL { 15 } ::= { cardEntry 149 } cardATMTcaSPPearlOCbrThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl overflow CBR threshold." DEFVAL { 1 } ::= { cardEntry 150 } cardATMTcaSPPearlOAbrFailureAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl overflow ABR alert period (in min)." DEFVAL { 15 } ::= { cardEntry 151 } cardATMTcaSPPearlOAbrThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl overflow ABR threshold." DEFVAL { 1 } ::= { cardEntry 152 } cardATMTcaSPPearlOVbr1FailureAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl overflow VBR1 alert period (in min)." DEFVAL { 15 } ::= { cardEntry 153 } cardATMTcaSPPearlOVbr1Thresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl overflow VBR1 threshold." DEFVAL { 1 } ::= { cardEntry 154 } cardATMTcaSPPearlOVbr2FailureAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl overflow VBR2 alert period (in min)." DEFVAL { 15 } ::= { cardEntry 155 } cardATMTcaSPPearlOVbr2Thresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl overflow VBR2 threshold." DEFVAL { 1 } ::= { cardEntry 156 } cardATMTcaSPPearlGCbrFailureAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl congestion CBR alert period (in min)." DEFVAL { 15 } ::= { cardEntry 157 } cardATMTcaSPPearlGCbrThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl congestion CBR threshold." DEFVAL { 1 } ::= { cardEntry 158 } cardATMTcaSPPearlGAbrFailureAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl congestion ABR alert period (in min)." DEFVAL { 15 } ::= { cardEntry 159 } cardATMTcaSPPearlGAbrThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl congestion ABR threshold." DEFVAL { 1 } ::= { cardEntry 160 } cardATMTcaSPPearlGVbr1FailureAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl congestion VBR1 alert period (in min)." DEFVAL { 15 } ::= { cardEntry 161 } cardATMTcaSPPearlGVbr1Thresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl congestion VBR1 threshold." DEFVAL { 1 } ::= { cardEntry 162 } cardATMTcaSPPearlGVbr2FailureAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl congestion VBR2 alert period (in min)." DEFVAL { 15 } ::= { cardEntry 163 } cardATMTcaSPPearlGVbr2Thresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca sp pearl congestion VBR2 threshold." DEFVAL { 1 } ::= { cardEntry 164 } cardATMTcaSPEnable OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The atm tca SP enable/disable." ::= { cardEntry 165 } cardSPEFCIEnable OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The atm EFCI marking enable/disable." ::= { cardEntry 166 } cardSPClpEnable OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The atm CLP-1 enable/disable." ::= { cardEntry 167 } spATMTcaId OBJECT-TYPE SYNTAX INTEGER { spBufferOverflowC1 (1), spBufferOverflowC2 (2), spBufferOverflowA1 (3), spBufferOverflowA2 (4), spBufferOverflowV11 (5), spBufferOverflowV12 (6), spBufferOverflowV21 (7), spBufferOverflowV22 (8), spBufferCongestionC1 (9), spBufferCongestionC2 (10), spBufferCongestionA1 (11), spBufferCongestionA2 (12), spBufferCongestionV11 (13), spBufferCongestionV12 (14), spBufferCongestionV21 (15), spBufferCongestionV22 (16) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the the most recently declared sp ATM threshold crossing alert and first byte is used to indicate the switching port number. i.e. sp 1 has spBufferOverflowC, then the value is 0x1001" ::= { cardEntry 168 } cardSubcardToRedundant OBJECT-TYPE SYNTAX CardTypes ACCESS read-write STATUS mandatory DESCRIPTION "Commands the card to initiate an immediate protection switch on the identified subcard that it controls. This causes control to be switched from the active card to the standby card." ::= { cardEntry 169} cardMemory5Usage OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The bank5 memory utilization, in terms of free bytes, for CP Oynx card only." ::= { cardEntry 170 } cardSF1OperStatus OBJECT-TYPE SYNTAX CardStatuses ACCESS read-only STATUS mandatory DESCRIPTION "The current status of Switch Fabric 1 (GX550)." ::= { cardEntry 171} cardSF2OperStatus OBJECT-TYPE SYNTAX CardStatuses ACCESS read-only STATUS mandatory DESCRIPTION "The current status of Switch Fabric 2 (GX550)." ::= { cardEntry 172} cardTM1OperStatus OBJECT-TYPE SYNTAX CardStatuses ACCESS read-only STATUS mandatory DESCRIPTION "The current status of Timing Module 1 (GX550)." ::= { cardEntry 173} cardTM2OperStatus OBJECT-TYPE SYNTAX CardStatuses ACCESS read-only STATUS mandatory DESCRIPTION "The current status of Timing Module 2 (GX550)." ::= { cardEntry 174} cardMemStartLog OBJECT-TYPE SYNTAX INTEGER { -- disable(0), -- disable enable(1) -- enable } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable Memory log record, 1 -- enable, 0 -- disable." ::= { cardEntry 175} cardMemLogLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Set the Memory log level. Default 6 " ::= { cardEntry 176} cardMemClrLog OBJECT-TYPE SYNTAX INTEGER { -- disable(0), -- disable enable(1) -- clear Memory Log } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable Clear Memory log, 1 -- clear, 0 (default) -- not clear." ::= { cardEntry 177} cardValidSubcards OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of manageable subcards physically present in this card." ::= { cardEntry 178} cardClp0CbrThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The CLP 0 threshold for CBR queues in the card. Once queue length reaches this threshold, all CLP 1 cells are discarded until queue length falls below the threshold. " ::= { cardEntry 179 } cardClp01CbrThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum length of CBR queues in the card. Once queue length reaches this threshold, all cells are discarded until queue length falls below this threshold." ::= { cardEntry 180 } cardClp0VbrRtThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The CLP 0 threshold for VBR RT queues in the card. Once queue length reaches this threshold, all CLP 1 cells are discarded until queue length falls below the threshold. " ::= { cardEntry 181 } cardClp01VbrRtThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum length of VBR-RT queues in the card. Once queue length reaches this threshold, all cells are discarded until queue length falls below this threshold." ::= { cardEntry 182 } cardClp0VbrNrtThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The CLP 0 threshold for VBR NRT queues in the card. Once queue length reaches this threshold, all CLP 1 cells are discarded until queue length falls below the threshold. " ::= { cardEntry 183 } cardClp01VbrNrtThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum length of VBR-NRT queues in the card. Once queue length reaches this threshold, all cells are discarded until queue length falls below this threshold." ::= { cardEntry 184 } cardClp0UAbrThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The CLP 0 threshold for ABR/UBR queues in the card. Once queue length reaches this threshold, all CLP 1 cells are discarded until queue length falls below the threshold. " ::= { cardEntry 185 } cardClp01UAbrThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum length of UBR/ABR queues in the card. Once queue length reaches this threshold, all cells are discarded until queue length falls below this threshold." ::= { cardEntry 186 } cardControlMessagesFromBus OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "The number of complete control Messages received over the Cell Bus for this card. " ::= { cardEntry 187 } cardControlMessagesToBus OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "The number of complete control Messages transmitted by this card over the Cell Bus. " ::= { cardEntry 188 } cardBTUsFromBus OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "The number of BTUs received by this card over the Cell Bus. " ::= { cardEntry 189 } cardBTUsToBus OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "The number of BTUs transmitted by this card over the Cell Bus. " ::= { cardEntry 190 } cardInvalidPvcBTUs OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "The number of BTUs received by this card over the Cell Bus with an invalid PVC identifier. " ::= { cardEntry 191 } cardIncompleteFramesFromBus OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "The number of partial frames received by this card over the Cell Bus which were discarded due to missing BTUs. " ::= { cardEntry 192 } cardBTUsBusErrors OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "The number of BTUs received by this card over the Cell Bus which were discarded due to errors. " ::= { cardEntry 193 } cardBTUsNoResource OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "The number of BTUs received by this card over the Cell Bus which were discarded due to no free BTUs available to replace it. " ::= { cardEntry 194 } cardInvalidPvcBTUsThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Send trap if the number of BTUs received by this card over the Cell Bus with an invalid PVC identifier exceeds this in a one minute interval. Zero value implies no check. " ::= { cardEntry 195 } cardIncompleteFramesFromBusThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Send trap if the number of partial frames received by this card over the Cell Bus which were discarded due to missing BTUs exceeds this in a one minute interval. Zero value implies no check. " ::= { cardEntry 196 } cardBTUsBusErrorThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Send trap if the number of BTUs received by this card over the Cell Bus which were discarded due to errors exceeds this in a one minute interval. Zero value implies no check. " ::= { cardEntry 197 } cardBTUsNoResourceThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Send trap if the number of BTUs received by this card over the Cell Bus which were discarded due to no free BTUs available to replace it exceeds this in a one minute interval. Zero value implies no check. " ::= { cardEntry 198 } cardFrameMemoryThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The percentage of frame memory utilization on this card which will generate a trap. Zero value implies no check. " ::= { cardEntry 199 } cardHoldQFrameMemory OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The frame memory utilization, in terms of bytes, currently on the Hold Queues for this card. " ::= { cardEntry 200 } cardTotalAAL5RxErrorCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of Rx errors detected by the AAL5 processor on this card. " ::= { cardEntry 201 } cardOperMemSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total memory size on this card, in MB (1024 Kbytes)." ::= { cardEntry 202 } -- The Physical Port Group -- -- The variables that configure physical ports at a node -- pportNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of physical ports (regardless of their current state) present at this node." ::= { pport 1 } pportTable OBJECT-TYPE SYNTAX SEQUENCE OF PportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of physical port entries. The number of entries is given by the value of pportNumber." ::= { pport 2 } pportEntry OBJECT-TYPE SYNTAX PportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The physical port entry contains objects relevant to a physical port." INDEX { pportSlotId, pportId } ::= { pportTable 1 } PportEntry ::= SEQUENCE { pportSlotId INTEGER, pportId INTEGER, pportAdminType INTEGER, pportNumLport INTEGER, pportDataRate INTEGER, pportType INTEGER, pportRecvClock INTEGER, pportXmitClock INTEGER, pportAdminStatus INTEGER, pportOperStatus INTEGER, pportDs1LineType INTEGER, pportDs1ZeroCoding INTEGER, pportDs1LineBuildout INTEGER, pportDiagTestId INTEGER, pportDiagTestRuns INTEGER, pportInOctets Counter, pportInFrames Counter, pportInDiscards Counter, pportInErrors Counter, pportOutOctets Counter, pportOutFrames Counter, pportOutDiscards Counter, pportOutErrors Counter, pportDiagState INTEGER, pportDiagOptionStr OCTET STRING, pportDiagPassCount INTEGER, pportDiagFailCount INTEGER, pportDiagResultStr DisplayString, pportLinkDownReason INTEGER, pportInterface INTEGER, pportAdminInterface INTEGER, pportCellScramble INTEGER, pportCbitParity INTEGER, pportMaxBufferSize INTEGER, pportPeakCellRate0 INTEGER, pportPeakCellRate1 INTEGER, pportPeakCellRate2 INTEGER, pportPeakCellRate3 INTEGER, pportPeakCellRate4 INTEGER, pportPeakCellRate5 INTEGER, pportPeakCellRate6 INTEGER, pportPeakCellRate7 INTEGER, pportInCells INTEGER, pportInErrorCells INTEGER, pportOutCells INTEGER, pportDs3LineBuildout INTEGER, pportSetDS0LoopUp INTEGER, pportSetDS0LoopDown INTEGER, pportDS0LoopUpStatus INTEGER, pportDS0LoopDownStatus INTEGER, pportDS0LoopStatus INTEGER, pportISDN INTEGER, pportdsx3LoopbackConfig INTEGER, pportdsx3SendCode INTEGER, pportdsx3LoopStatus INTEGER, pportdsx3FEACStatus INTEGER, pportds1LoopbackConfig INTEGER, pportds1SendCode INTEGER, pportds1LoopStatus INTEGER, pportSetClkBkup INTEGER, pportAtmIdleWord INTEGER, pportAtmDisCardMode INTEGER, pportAtmLastUnconfiguredVpi INTEGER, pportAtmLastUnconfiguredVci INTEGER, pportAtmUnconfiguredCells Counter, pportAtmNumBitsVCI INTEGER, pportAtmNumBitsVPI INTEGER, pportAtmInterfaceType INTEGER, pportSonetSDHLoopbackConfig INTEGER, pportSonetSDHLoopStatus INTEGER, pportOutDiscardsCell Counter, pportAtmPlcp INTEGER, pportCbrTargetClockMode INTEGER, pportCbrCurrentClockMode INTEGER, pportClockMasterChannel INTEGER, pportFibreType INTEGER, pportLaserStatus INTEGER, pportMaxActiveVpiBits INTEGER, pportBipErrorsThresh INTEGER, pportBipSectionErrors Counter, pportBipLineErrors Counter, pportBipPathErrors Counter, pportFebeErrors Counter, pportHcsErrors Counter, pportHcsSevereErrors Counter, pportCongestedReceivedCells Counter, pportCongestedTransmittedCells Counter, pportAtmLayerErroredReceivedCells Counter, pportAtmLayerErroredTransmittedCells Counter, pportDS0BitStuff INTEGER, pportDS0BitErrorCount INTEGER, pportDS0BitErrorFreeSeconds INTEGER, pportDS0BitErroredSeconds INTEGER, pportDS0MidspanRepeaters INTEGER, pportDS0TestPatternSync INTEGER, pportDS0InjectBitError INTEGER, pportDS0FarendLpbkType INTEGER, pportDS0LpbkMode INTEGER, pportDS0SwitchLpbkStart INTEGER, pportDS0SwitchLpbkEnd INTEGER, pportDS0FarendDS0InLpbk INTEGER, pportDS0SendTestTraffic INTEGER, pportOc3LoopConfig INTEGER, pportOc3LoopStatus INTEGER, pportISDNIpBaseAddr IpAddress, pportSonetSTM1Scramble INTEGER, pportEFCIMarking INTEGER, pportAtmQOSTransmitMode INTEGER, pportHECMode INTEGER, pportISDNChannelStatus OCTET STRING, pportds1FarEndLoopStatus INTEGER, pportds1FDLControl INTEGER, pportds1FDLPrmXmit INTEGER, pportds1FDLPidXmit INTEGER, pportds1FDLXmitPid OCTET STRING, pportds1FDLRcvPid OCTET STRING, pportds1FDLRcvTsid OCTET STRING, pportSonetSDHFramingMode INTEGER, pportds1InbandLoopType INTEGER, pportESFDataLinkStatus INTEGER, pportPMTcaId INTEGER, pportBchanTimerValue INTEGER, pportAAL5CRC32Error Counter, pportAAL5CPIError Counter, pportAAL5LengthError Counter, pportAAL5ReassemblyTimerError Counter, pportAAL5MaxNrSegError Counter, pportRedundancyArch INTEGER, pportAPSadminDir INTEGER, pportAPSlineType INTEGER, pportAPSrevertiveMode INTEGER, pportAPSpairedSlotId INTEGER, pportAPSpairedPportId INTEGER, pportAPSsfBerThresh INTEGER, pportAPSsdBerThresh INTEGER, pportAPSwtrPeriod INTEGER, pportAPSprotectionLineState INTEGER, pportAPSxCommand INTEGER, pportAPSconfigStatus INTEGER, pportAPSOperRxStatus INTEGER, pportBertPattern INTEGER, pportBertUserBytes INTEGER, pportBertErrorRate INTEGER, pportBertCommand INTEGER, pportBertStatus INTEGER, pportBertBitCount Gauge, pportBertErrorCount Gauge, pportds1FELoopbackControl INTEGER, pportFT1DS0s DisplayString, pportIMUXCnt INTEGER, pportds1PMConfigThresh INTEGER, pportIdleCellType INTEGER, pportATMTcaInHECErrorUAlertPeriod INTEGER, pportATMTcaInHECErrorUThresh INTEGER, pportATMTcaEBufOverflowCBRAlertPeriod INTEGER, pportATMTcaEBufOverflowCBRThresh INTEGER, pportATMTcaEBufOverflowABRAlertPeriod INTEGER, pportATMTcaEBufOverflowABRThresh INTEGER, pportATMTcaEBufOverflowVBR1AlertPeriod INTEGER, pportATMTcaEBufOverflowVBR1Thresh INTEGER, pportATMTcaEBufOverflowVBR2AlertPeriod INTEGER, pportATMTcaEBufOverflowVBR2Thresh INTEGER, pportATMTcaInFramerFIFOOverflowAlertPeriod INTEGER, pportATMTcaInFramerFIFOOverflowThresh INTEGER, pportATMTcaELookupFailureAlertPeriod INTEGER, pportATMTcaELookupFailureThresh INTEGER, pportATMTcaEnable INTEGER, pportATMTcaId INTEGER, pportFethAdminMacAddr OCTET STRING, pportFethOperMacAddr OCTET STRING, pportConfigAlarmSoakTime INTEGER, pportConfigAlarmClearTime INTEGER, pportFethPortCapability INTEGER, pportVpshapingDiscardCellCount INTEGER } pportSlotId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number of the corresponding physical port." ::= { pportEntry 1 } pportId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the corresponding physical port on the board." ::= { pportEntry 2 } pportAdminType OBJECT-TYPE SYNTAX INTEGER { v35-6 (1), -- 6-port V.35 i/o card ft1-1-24 (2), -- 1-port 24-channel Fractional T1 fe1-1-30 (3), -- 1-port 30-channel Fractional E1 uio-6 (4), -- 6-port universal i/o card cp1 (5), -- Control Processor uio-8 (6), -- 8-port V.35 i/o card ft1-4-24 (7), -- 4-port 24-channel Fractional T1 fe1-4-30 (8), -- 4-port 30-channel Fractional E1 ft3-1 (9), -- 1-port Fractional T3 i/o card fe3-1 (10), -- 1-port Fractional E3 i/o card hssi-1 (11), -- HSSI i/o card dsx1-10 (12), -- 10-port DSX-1 card rs232-18 (13), -- 18-port X.21/V.24 I/O card, for STDX 3000/6000 only rs232-8 (14), -- 8-port X.21/V.24 I/O card, for STDX 3000/6000 only ut1-4-24 (15), -- 4-port 24-channel Un-Channelized T1 ue1-4-30 (16), -- 4-port 30-channel Un-Channelized E1 atmds3-1 (17), -- 1-port ATM DS3 UNI I/O card atme3-1 (18), -- 1-port ATM E3 UNI I/O card pri-4 (19), -- 4-port ISDN PRI I/O card e1-pri-4 (20), -- 4-port E1 PRI I/O card sft1-4-24 (21), -- 4-port short haul 24-channel Fractional T1 card sut1-4-24 (22), -- 4-port short haul 24-channel Un-Channelized T1 card st1-pri-4 (23), -- 4-port short haul PRI I/O card t1-atm (24), -- T1 ATM e1-atm (25), -- E1 ATM ads3-t3 (26), -- ATM DS3 T3 (topaz) ads3-e3 (27), -- ATM DS3 E3 (topaz) cbr-ds1-s-4 (28), -- 4-port CBR DS1 structured card cbr-ds1-us-4 (29), -- 4-port CBR DS1 unstructured card cbr-e1-s-4 (30), -- 4-port CBR E1 structured card cbr-e1-us-4 (31), -- 4-port CBR E1 unstructured card cbr-atmiwu-1 (32), -- 1-port ATM-IWU STM-1/STS-3c card toc3-atm-4 (33), -- 4-port Topaz OC3c ATM card tstm1-atm-4 (34), -- 4-port Topaz STM1 ATM card atmcs-1 (35) -- 1-port ATM-CS card (siemens) } ACCESS read-write STATUS mandatory DESCRIPTION "The defined type of the board which the physical port is on." ::= { pportEntry 3 } pportNumLport OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of logical ports on the physical port." ::= { pportEntry 4 } pportDataRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An estimate of the physical port's data rate in bits per second. The data rate can't be an arbitrary value. The legal values are list below. Note that the T1/E1 class of cards don't support this variable and return a 0 For UIO, DSX1: 9600, 19200, 38400, 48000, 56000, 64000, 128000, 192000, 256000, 320000, 384000, 448000, 512000, 576000, 640000, 704000, 768000, 832000, 896000, 960000, 1024000, 1088000, 1152000, 1216000, 1280000, 1344000, 1408000, 1472000, 1536000, 1600000, 1664000, 1728000, 1792000, 1856000, 1920000, 1984000, 2048000, 4096000, 6144000, 8192000 For HSSI: 1579000, 3158000, 4737000, 6316000, 7895000, 9474000, 11053000, 12632000, 14211000, 15790000, 17369000, 18948000, 20527000, 22106000, 23685000, 25264000, 26843000, 28422000, 30001000, 31580000, 33159000, 34738000, 36317000, 37896000, 39475000, 41054000, 42633000, 44212000, 45791000, 47370000, 48949000, 50528000 For ATM-IWU, TOPAZ OC3c: 155520000 For T1, E1, UT1, UE1, PRI, SH-T1: 0 " ::= { pportEntry 5 } pportType OBJECT-TYPE SYNTAX INTEGER { v35-6 (1), -- 6-port V.35 i/o card ft1-1-24 (2), -- 1-port 24-channel Fractional T1 fe1-1-30 (3), -- 1-port 30-channel Fractional E1 uio-6 (4), -- 6-port universal i/o card cp1 (5), -- Control Processor uio-8 (6), -- 8-port V.35 i/o card ft1-4-24 (7), -- 4-port 24-channel Fractional T1 fe1-4-30 (8), -- 4-port 30-channel Fractional E1 ft3-1 (9), -- 1-port Fractional T3 i/o card fe3-1 (10), -- 1-port Fractional E3 i/o card hssi-1 (11), -- HSSI i/o card dsx1-10 (12), -- 10-port DSX-1 card rs232-18 (13), -- 18-port X.21/V.24 I/O module, for STDX 3000/6000 only rs232-8 (14), -- 8-port X.21/V.24 I/O card, for STDX 3000/6000 only ut1-4-24 (15), -- 4-port 24-channel Un-Channelized T1 ue1-4-30 (16), -- 4-port 30-channel Un-Channelized E1 atm-1 (17), -- 1-port ATM DS3 UNI I/O card atme3-1 (18), -- 1-port ATM E3 UNI I/O card pri-4 (19), -- 4-port ISDN PRI I/O card e1-pri-4 (20), -- 4-port E1 PRI I/O card sft1-4-24 (21), -- 4-port short haul 24-channel Fractional T1 card sut1-4-24 (22), -- 4-port short haul 24-channel Un-Channelized T1 card st1-pri-4 (23), -- 4-port short haul PRI I/O card t1-atm (24), -- T1 ATM e1-atm (25), -- E1 ATM ads3-t3 (26), -- ATM DS3 T3 (topaz) ads3-e3 (27), -- ATM DS3 E3 (topaz) cbr-ds1-s-4 (28), -- 4-port CBR DS1 structured card cbr-ds1-us-4 (29), -- 4-port CBR DS1 unstructured card cbr-e1-s-4 (30), -- 4-port CBR E1 structured card cbr-e1-us-4 (31), -- 4-port CBR E1 unstructured card cbr-atmiwu-1 (32), -- 1-port ATM-IWU STM-1/STS-3c card toc3-atm-4 (33), -- 4-port Topaz OC3c ATM card tstm1-atm-4 (34), -- 4-port Topaz STM1 ATM card atmcs-1 (35) -- 1-port ATM-CS card (siemens) } ACCESS read-only STATUS mandatory DESCRIPTION "The actual type of the physical port." ::= { pportEntry 6 } pportRecvClock OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The receive clock source. This object works in cooperation with pportXmitClock. The following are the various values for different clock source types: Type Clock Source pportRevClock pportXmitClock { pportEntry 7 } { pportEntry 8 } V.35 DCE ............ 0 0 or UIO LoopTime DCE ... 3 0 DTE ............ 1 2 Direct Trunk ... 1 0 T1 or Loop Timed ..... 1 1 E1 Internal ....... 2 2 External ....... don't care 3 " ::= { pportEntry 7 } pportXmitClock OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The transmit clock source. This object works in cooperation with pportXmitClock. The following are the various values for different clock source types: Type Clock Source pportRevClock pportXmitClock { pportEntry 7 } { pportEntry 8 } V.35 DCE ............ 0 0 or UIO LoopTime DCE ... 3 0 DTE ............ 1 2 Direct Trunk ... 1 0 T1 or Loop Timed ..... 1 1 E1 Internal ....... 2 2 External ....... don't care 3 " ::= { pportEntry 8 } pportAdminStatus OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), up (1), down (2), testing (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the physical port." ::= { pportEntry 9 } pportOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), testing (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the physical port." ::= { pportEntry 10 } pportDs1LineType OBJECT-TYPE SYNTAX INTEGER { d4 (1), esf-ansi (2), esf-att-address-a (3), esf-none (4), e1-cas-crc4 (5), e1-cas-no-crc4 (6), e1-no-cas-crc4 (7), e1-no-cas-no-crc4 (8), esf-att-address-b (9) } ACCESS read-write STATUS mandatory DESCRIPTION "The line type of the T1 or FT1-24B port. ANSI ESF is equivalent to Bellcore ESF." ::= { pportEntry 11 } pportDs1ZeroCoding OBJECT-TYPE SYNTAX INTEGER { ami (1), b8zs (2), hdb3 (3), jammed-bit (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The variety of zero code suppression used on the T1 or FT1-24B link. Jammed bit is equivalent to dsx1JBZS where the DS0s will run at 56K bps." ::= { pportEntry 12 } pportDs1LineBuildout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The line build out or line length specification for the DS1 or DSX-1 transmitter. These values are card specific: 10 port DSX-1 card ------------------ The accepted values are: 1 - 0 to 110 feet 2 - 110 to 220 feet 3 - 220 to 330 feet 4 - 330 to 440 feet 5 - 440 to 550 feet 6 - 550 to 660 feet 7 - over 655 feet 1-port and 4-port T1 cards -------------------------- The accepted values are: 96 - 0 to 133 feet 128 - 133 to 266 feet 160 - 266 to 399 feet 192 - 399 to 533 feet 224 - 533 to 655 feet 96 - 0 db 32 - -7.5 db 64 - -15 db 4-port CBR card --------------- The accepted values are: 96 - 0 db 32 - -7.5 db 64 - -15 db 4-port Short Haul T1 cards -------------------------- The accepted values are: 96 - 0 to 133 feet 128 - 133 to 266 feet 160 - 266 to 399 feet 192 - 399 to 533 feet 224 - 533 to 655 feet" ::= { pportEntry 13 } pportDiagTestId OBJECT-TYPE SYNTAX INTEGER { v35-sca-local-loopback (1), v35-sca-remote-loopback (2), v35-csu-loopback (3), hssi-local-dte-loopback (5), hssi-local-line (6), hssi-remote-line-loopback (7), ds1-framer-local-loopback (11), ds1-line-local-loopback (12), ds1-framer-remote-loopback (13), ds1-line-remote-loopback (14) } ACCESS read-write STATUS mandatory DESCRIPTION "Identification for the diagnostics tests to be run." ::= { pportEntry 14 } pportDiagTestRuns OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of passes of the diagnostics tests to be run. The default value is 1." ::= { pportEntry 15 } pportInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets received on the physical port, including framing characters." ::= { pportEntry 16 } pportInFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames received on the physical port." ::= { pportEntry 17 } pportInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of inbound frames discarded." ::= { pportEntry 18 } pportInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of inbound frames that contained erroneous headers (e.g., illegal or unknown DLCIs)." ::= { pportEntry 19 } pportOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets transmitted out of the physical port, including framing characters." ::= { pportEntry 20 } pportOutFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames transmitted out of the physical port." ::= { pportEntry 21 } pportOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of outbound frames discarded due to severe congestion." ::= { pportEntry 22 } pportOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of outbound frames that causes xmit errors." ::= { pportEntry 23 } pportDiagState OBJECT-TYPE SYNTAX INTEGER { -- inactive (0), active(1) } ACCESS read-write STATUS mandatory DESCRIPTION "The current state of the diagnostic on this physical port." ::= { pportEntry 24 } pportDiagOptionStr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Optional parameters to the diagnostic." ::= { pportEntry 25 } pportDiagPassCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of successful diagnostic passes." ::= { pportEntry 26 } pportDiagFailCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of failed diagnostic passes." ::= { pportEntry 27 } pportDiagResultStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of last diagnostic failure." ::= { pportEntry 28 } pportLinkDownReason OBJECT-TYPE SYNTAX INTEGER { -- none (0), red-alarm (1), yellow-alarm (2), blue-alarm (4), carrier-loss (8), looped-back (16), ber-threshold (64), signal-label-mismatch (128), loss-of-signal (256), loss-of-frame (512), loss-of-cell-delination (1024), line-AIS (2048), path-AIS (4096), loss-of-pointer (8192), line-RFI (16384), path-RFI (32768), signal-label-undefined (65536) } ACCESS read-only STATUS mandatory DESCRIPTION "Reason why the link is down. The blue-alarm is equivalent to the Alarm Indication Signal (AIS) failure." ::= { pportEntry 29 } pportInterface OBJECT-TYPE SYNTAX INTEGER { eia449 (1), x21 (2), eia530 (3), eia530A (4), v35 (5), e1-coax (6), e1-db (7), none (8), v24 (9), sonet (10), sdh (11), multi-mode (12), -- optical interface for topaz only single-mode (13) -- optical interface for topaz only } ACCESS read-only STATUS mandatory DESCRIPTION "Actual interface connected to Multi-Interface Port or ATM-IWU." ::= { pportEntry 30 } pportAdminInterface OBJECT-TYPE SYNTAX INTEGER { eia449 (1), x21 (2), eia530 (3), eia530A (4), v35 (5), e1-coax (6), e1-db (7), none (8), v24 (9), sonet (10), sdh (11), multi-mode (12), -- optical interface for topaz only single-mode (13) -- optical interface for topaz only } ACCESS read-write STATUS mandatory DESCRIPTION "Configured interface connected to Multi-Interface Port or ATM-IWU." ::= { pportEntry 31 } pportCellScramble OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Configured ATM cell payload scrambling." ::= { pportEntry 32 } pportCbitParity OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Configured ATM DS3 C-bit Parity." ::= { pportEntry 33 } pportMaxBufferSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum receive/transmit buffer size for the ATM UNI DS3 IOP" ::= { pportEntry 34 } pportPeakCellRate0 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak Cell Rate (cell/sec.) for rate queue #0. rate queues 0 - 3 are high priority" ::= { pportEntry 35 } pportPeakCellRate1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak Cell Rate (cell/sec.) for rate queue #1. rate queues 0 - 3 are high priority" ::= { pportEntry 36 } pportPeakCellRate2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak Cell Rate (cell/sec.) for rate queue #2. rate queues 0 - 3 are high priority" ::= { pportEntry 37 } pportPeakCellRate3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak Cell Rate (cell/sec.) for rate queue #3. rate queues 0 - 3 are high priority" ::= { pportEntry 38 } pportPeakCellRate4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak Cell Rate (cell/sec.) for rate queue #4. rate queues 4 - 7 are low priority" ::= { pportEntry 39 } pportPeakCellRate5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak Cell Rate (cell/sec.) for rate queue #5. rate queues 4 - 7 are low priority" ::= { pportEntry 40 } pportPeakCellRate6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak Cell Rate (cell/sec.) for rate queue #6. rate queues 4 - 7 are low priority" ::= { pportEntry 41 } pportPeakCellRate7 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak Cell Rate (cell/sec.) for rate queue #7. rate queues 4 - 7 are low priority" ::= { pportEntry 42 } pportInCells OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of cells received" ::= { pportEntry 43 } pportInErrorCells OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of cells received with error" ::= { pportEntry 44 } pportOutCells OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of cells transmitted" ::= { pportEntry 45 } pportDs3LineBuildout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The line build out or line length specification for the DS3 transmitter. 1-port ATM-UNI DS3 card -------------------------- The accepted values are: 1 - 0 to 225 feet 2 - 226 to 450 feet" ::= { pportEntry 46 } pportSetDS0LoopUp OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Bit map used to set one or more DS0's into loopback. Low bit corresponds to DS0 1. If a bit is set that DS0 is put into loopback." ::= { pportEntry 47 } pportSetDS0LoopDown OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Bit map used to set one or more DS0's out of loopback. Low bit corresponds to DS0 1. If a bit is set that DS0 is put out of loopback." ::= { pportEntry 48 } pportDS0LoopUpStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bit map reporting which DS0's have gone into loopback since the last time this variable was read" ::= { pportEntry 49 } pportDS0LoopDownStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bit map reporting which DS0's have gone out of loopback since the last time this variable was read" ::= { pportEntry 50 } pportDS0LoopStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bit map reporting which DS0's are currently in loopback. Low bit corresponds to DS0 1" ::= { pportEntry 51 } pportISDN OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether ISDN PRI is enabled for this physical port" ::= { pportEntry 52 } pportdsx3LoopbackConfig OBJECT-TYPE SYNTAX INTEGER { dsx3NoLoop (1), dsx3PayloadLoop (2), dsx3LineLoop (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Integer used to set the loopback state of the DS3 or E3" ::= { pportEntry 53 } pportdsx3SendCode OBJECT-TYPE SYNTAX INTEGER { dsx3SendNoCode (1), dsx3SendLineCode (2), dsx3SendResetCode (4) } ACCESS read-write STATUS mandatory DESCRIPTION "Integer used to send loopback code to far-end DS3" ::= { pportEntry 54 } pportdsx3LoopStatus OBJECT-TYPE SYNTAX INTEGER { noloop (1), payloadloop (2), lineloop (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Integer indicating the current loopback status of the DS3 or E3" ::= { pportEntry 55 } pportdsx3FEACStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Integer indicating the current DS3 FAEC status: -- none (0), DS3 Equipment Failure (1), DS3 LOS (2), DS3 Out of Frame (4), DS3 AIS received (8), DS3 IDLE received (16), DS3 Equipment-Failure (NSA) (32), DS3 Common Equipment Failure (64), DS3 Loopback received (128) " ::= { pportEntry 56 } pportds1LoopbackConfig OBJECT-TYPE SYNTAX INTEGER { ds1NoLoop (1), ds1PayloadLoop (2), ds1LineLoop (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Integer used to set the loopback state of the DS1" ::= { pportEntry 57 } pportds1SendCode OBJECT-TYPE SYNTAX INTEGER { ds1SendNoCode (1), ds1SendFramedInbandLineActuateLoop (2), ds1SendFramedInbandLineReleaseLoop (3), ds1SendUnframedInbandLineActuateLoop (4), ds1SendUnframedInbandLineReleaseLoop (5), ds1SendFdlESFAnsiLineActuateLoop (6), ds1SendFdlESFAnsiLineReleaseLoop (7), ds1SendFdlESFAnsiPayloadActuateLoop (8), ds1SendFdlESFAnsiPayloadReleaseLoop (9) } ACCESS read-write STATUS mandatory DESCRIPTION "Integer used to send loopback code to far-end DS1" ::= { pportEntry 58 } pportds1LoopStatus OBJECT-TYPE SYNTAX INTEGER { noloop (1), payloadloop (2), lineloop (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Integer indicating the current loopback status of the DS1" ::= { pportEntry 59 } pportSetClkBkup OBJECT-TYPE SYNTAX INTEGER { internalClkBkup (1), looptimedClkBkup (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The desired clock source backup if the card is set in external clock source mode" ::= { pportEntry 60 } pportAtmIdleWord OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " The word used to stuff the payload of the ATM idle cell" ::= { pportEntry 61 } pportAtmDisCardMode OBJECT-TYPE SYNTAX INTEGER { ansiInval (1), ansiUnassignedInval (2), atmFInvalid (3), atmFUnassignedInval (4), ccittIdle (5), ccittUnassignedIdle (6) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired clock source backup if the card is set in external clock source mode" ::= { pportEntry 62 } pportAtmLastUnconfiguredVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This entry holds the Vpi read from the last Unconfigured atm cell received. This entry applies to ATM pports only." ::={ pportEntry 63 } pportAtmLastUnconfiguredVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This entry holds the Vci read from the last Unconfigured atm cell received. This entry applies to ATM pports only." ::={ pportEntry 64 } pportAtmUnconfiguredCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This entry holds a count of the number of Unconfigured ATM cells received. This entry applies to ATM pports only." ::={ pportEntry 65 } pportAtmNumBitsVCI OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This entry holds a count of the VCI bits supppoted my this ATM card." ::={ pportEntry 66 } pportAtmNumBitsVPI OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This entry holds a count of the VPI bits supppoted my this ATM card." ::={ pportEntry 67 } pportAtmInterfaceType OBJECT-TYPE SYNTAX INTEGER { uni (1), nni (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Integer used to set ATM UNI or NNI type" ::= { pportEntry 68 } pportSonetSDHLoopbackConfig OBJECT-TYPE SYNTAX INTEGER { noLoop (1), lineLoop (2), diagnosticsLoop (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Integer used to set the loopback state of the Sonet/SDH port " ::= { pportEntry 69 } pportSonetSDHLoopStatus OBJECT-TYPE SYNTAX INTEGER { noLoop (1), lineLoop (2), diagnosticsLoop (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Integer indicating the current loopback status of the Sonet/SDH port" ::= { pportEntry 70 } pportOutDiscardsCell OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of outbound cell discarded due to congestion." ::= { pportEntry 71 } pportAtmPlcp OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION " The PLCP maintains the state of the ATM Physical Layer Convergence Protocol. When the protocol is disabled atm direct mapping is used with hec cell delineation." ::={ pportEntry 72 } pportCbrTargetClockMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The clocking method to be used by the CBR card. 4-port CBR card ----------------------------------------------- 1 - synchronous (external) clocking 2 - SRTS clocking 3 - adaptive clock method" ::= { pportEntry 73 } pportCbrCurrentClockMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The clocking method currently used by the CBR card. 4-port CBR card ----------------------------------------------- 1 - synchronous (external) clocking 2 - SRTS clocking 3 - adaptive clock method" ::= { pportEntry 74 } pportClockMasterChannel OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of the channel (lport) on this pport that is used as ACM/SRTS master for this line interface: 4-port CBR E1/DS1 card (structured mode): 1..4" ::= { pportEntry 75 } pportFibreType OBJECT-TYPE SYNTAX INTEGER { sonetMultiMode(4), sonetShortSingleMode(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of fibre connected to the ATM-IWU. Its type determines the maximum transmission distance. 1-port ATM-IWU STM-1/STS-3c card -------------------------------- 4 - multimode fibre (maximum transmission distance approx. 2 km) 2 - single mode fibre short haul (maximum transmission distance approx. 20 km)" ::= { pportEntry 76 } pportLaserStatus OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The configured state of the laser: 1-port ATM-IWU STM-1/STS-3c card & Topaz 4-port OC3 & STM-1 card ---------------------------------------------------------------- 1 - off 2 - on" ::= { pportEntry 77 } pportMaxActiveVpiBits OBJECT-TYPE SYNTAX INTEGER (0..12) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of active VPI bits configured for use at the ATM interface. At the ATM UNI, the maximum number of active VPI bits configured for use ranges from 0 to 8 only." ::= { pportEntry 78 } pportBipErrorsThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The threshold of BIP errors. If the number of line BIP-24/8 rrors persists to exceed this value, the pport will be taken down and a trap will be issued: 1-port ATM-IWU STM-1/STS-3c card: -------------------------------- 1 - ignore BIP errors 4 - 10^-4 errors 5 - 10^-5 errors 6 - 10^-6 errors" ::= { pportEntry 79 } pportBipSectionErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of B1 section BIP-8 errors since the last reset." ::= { pportEntry 80 } pportBipLineErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of line BIP-24/8 errors since the last reset." ::= { pportEntry 81 } pportBipPathErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of B3 path BIP-8 errors since the last reset." ::= { pportEntry 82 } pportFebeErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of line Far End Block Errors since the last reset." ::= { pportEntry 83 } pportHcsErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of correctable HCS errors since the last reset." ::= { pportEntry 84 } pportHcsSevereErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of uncorrectable HCS errors since the last reset." ::= { pportEntry 85 } pportCongestedReceivedCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received cells that were discarded due to congestion of the ATM-IWU, since the last reset." ::= { pportEntry 86 } pportCongestedTransmittedCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of cells to be transmitted, that were discarded due to congestion of the ATM-IWU, since the last reset." ::= { pportEntry 87 } pportAtmLayerErroredReceivedCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received cells that were discarded due to ATM layer errors, since the last reset." ::= { pportEntry 88 } pportAtmLayerErroredTransmittedCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of cells to be transmitted, that were discarded due to ATM layer errors, since the last reset." ::= { pportEntry 89 } pportDS0BitStuff OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Bit stuffing on or off for 2047 bit pattern in DS0 far end testing." ::= { pportEntry 90 } pportDS0BitErrorCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of errors in 2047 DS0 far end testing." ::= { pportEntry 91 } pportDS0BitErrorFreeSeconds OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of error free seconds in 2047 DS0 far end testing." ::= { pportEntry 92 } pportDS0BitErroredSeconds OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of errored seconds in 2047 DS0 far end testing." ::= { pportEntry 93 } pportDS0MidspanRepeaters OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of Midspan repeaters in a link to be punched thru for DS0 far end testing." ::= { pportEntry 94 } pportDS0TestPatternSync OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "While DS0 far end testing, the DS0 pattern has detected the pattern four consecutive times. If the pattern is lost, this variable will be equal to one." ::= { pportEntry 95 } pportDS0InjectBitError OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "While testing DS0 far end lpbk, setting this variable will inject a bit error into the test pattern." ::= { pportEntry 96 } pportDS0FarendLpbkType OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The type of DS0 equipment to be looped back at the far end during DS0 far end testing. 1 - OCU 2 - DSU 3 - CSU." ::= { pportEntry 97 } pportDS0LpbkMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This determines what mode the DS0 Processor will be set to. 1 - no lpbk 2 - switch lpbk 3 - far end lpbk." ::= { pportEntry 98 } pportDS0SwitchLpbkStart OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the first DS0 in a sting of consecutive DS0's to be looped back at the switch if the DS0 processor is set to switch loopback. If it's set to far end loopback, this determines which singleton DS0 will be monitored at the receive end." ::= { pportEntry 99 } pportDS0SwitchLpbkEnd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the Last DS0, +1, in a sting of consecutive DS0's to be looped back at the switch if the DS0 processor is set to switch loopback. If the DS0 processor is set to far end loopback, this value will equal pportDS0SwitchLpbkStart + 1.." ::= { pportEntry 100 } pportDS0FarendDS0InLpbk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the DS0 in far end loopback." ::= { pportEntry 101 } pportDS0SendTestTraffic OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Enable or Disable sending DS0 2047 test pattern for DS0 far end testing." ::= { pportEntry 102 } pportOc3LoopConfig OBJECT-TYPE SYNTAX INTEGER { oc3NoLoop (1), oc3AtmLoop (2), oc3SerPhyLoop (3), oc3ParPhyLoop (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The loopback state of the ATM IWU OC3" ::= { pportEntry 103 } pportOc3LoopStatus OBJECT-TYPE SYNTAX INTEGER { oc3NoLoop (1), oc3AtmLoop (2), oc3SerPhyLoop (3), oc3ParPhyLoop (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current loopback status of the ATM IWU OC3" ::= { pportEntry 104 } pportISDNIpBaseAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the base address used for IP Dynamic Address Assignment" ::= { pportEntry 105 } pportSonetSTM1Scramble OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Configured SONET/STM-1 scrambling." ::= { pportEntry 106 } pportEFCIMarking OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Configured EFCI marking for cell traffic in Topaz IOMs" ::= { pportEntry 107 } pportAtmQOSTransmitMode OBJECT-TYPE SYNTAX INTEGER { fix-priority (1), weighted-round-robin (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Select fix priority or weighted round-robin for cell transmission in different ATM QOS classes." ::= { pportEntry 108 } pportHECMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Configured ATM HEC single bit error correction routine." ::= { pportEntry 109 } pportISDNChannelStatus OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The ISDN call status of all the B-Channels on the pport are encoded into this 24 character, (for T1 ISDN PRI card...23B+D) or 31 character, (for E1 ISDN PRI card...30B+D ) ASCII string. The respective call state for each B-Channel is represented in its corresponding bit position. The D-Channel status is similarly encoded into the appropriate bit position (24th for T1) or (16th for E1). The encoding legend is as follows... I B-Channel is in Idle state R B-Channel is in Dialing (Ringing) state C B-Channel is in Connected (Active) state H B-Channel is in Releasing (Hanging-up) state U D-Channel is Up D D-Channel is Down" ::= { pportEntry 110 } pportds1FarEndLoopStatus OBJECT-TYPE SYNTAX INTEGER { fe_noloop (1), fe_line_loop (2), fe_payload_loop (3) } ACCESS read-write STATUS mandatory DESCRIPTION "DS1 Far End Loopback Status as commanded by the switch" ::= { pportEntry 111 } pportds1FDLControl OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or Disables FDL Function for DS1 ESF pport" ::= { pportEntry 112 } pportds1FDLPrmXmit OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or Disables transmission of Performance Monitoring Report (PRM) messages on the DS1 ESF FDL" ::= { pportEntry 113 } pportds1FDLPidXmit OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or Disables transmission of Path ID (PID) messages on the DS1 ESF FDL" ::= { pportEntry 114 } pportds1FDLXmitPid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Transmit Path Id to be sent on the DS1 ESF FDL. (76 bytes)" ::= { pportEntry 115 } pportds1FDLRcvPid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The last path id message received on the DS1 ESF FDL. (76 bytes)" ::= { pportEntry 116 } pportds1FDLRcvTsid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The last test id message received on the DS1 ESF FDL. (76 bytes)" ::= { pportEntry 117 } pportSonetSDHFramingMode OBJECT-TYPE SYNTAX INTEGER { sonet (1), sdh (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The Framing mode for SONET/SDH port interface types." ::= { pportEntry 118 } pportds1InbandLoopType OBJECT-TYPE SYNTAX INTEGER { ds1CSU (1), ds1NI (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Integer used to distinguish Inband Line loopback code sent from the switch when commanding inband line loopbacks, and reckognized by the switch when responding to remote loopback commands" ::= { pportEntry 119 } pportESFDataLinkStatus OBJECT-TYPE SYNTAX INTEGER { inService (1), outOfService (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current status of the DS1 ESF (FDL) data link." ::= { pportEntry 120 } pportPMTcaId OBJECT-TYPE SYNTAX INTEGER { currentThresholdCVL (1), currentThresholdESL (2), currentThresholdSESL (3), currentThresholdUASL (4), currentThresholdCVP (5), currentThresholdESP (6), currentThresholdSESP (7), currentThresholdSASP (8), currentThresholdCSSP (9), currentThresholdUASP (10), currentThresholdCVS (11), currentThresholdESS (12), currentThresholdSESS (13), currentThresholdESx (14), dayThresholdCVL (15), dayThresholdESL (16), dayThresholdSESL (17), dayThresholdUASL (18), dayThresholdCVP (19), dayThresholdESP (20), dayThresholdSESP (21), dayThresholdSASP (22), dayThresholdCSSP (23), dayThresholdUASP (24), dayThresholdCVS (25), dayThresholdESS (26), dayThresholdSESS (27), dayThresholdESx (28), currentThresholdCVCPP (29), currentThresholdESCPP (30), currentThresholdSESCPP(31), currentThresholdSASCPP(32), currentThresholdUASCPP(33), dayThresholdCVCPP (34), dayThresholdESCPP (35), dayThresholdSESCPP (36), dayThresholdSASCPP (37), dayThresholdUASCPP (38), currentThresholdCVCPPFE (39), currentThresholdESCPPFE (40), currentThresholdSESCPPFE(41), currentThresholdSASCPPFE(42), currentThresholdUASCPPFE(43), dayThresholdCVCPPFE (44), dayThresholdESCPPFE (45), dayThresholdSESCPPFE (46), dayThresholdSASCPPFE (47), dayThresholdUASCPPFE (48) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the the most recently declared pport threshold crossing alert" ::= { pportEntry 121 } pportBchanTimerValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This value is used on a per port basis to add a delay to answering a ISDN call of the initial Disconnect from the network. This due to the ARP cache not updating quick enough on the routers" ::= { pportEntry 122 } pportAAL5CRC32Error OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received AAL5 packets with CRC32 errors." ::= { pportEntry 123 } pportAAL5CPIError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received AAL5 packets with CPI errors The only valid value currently defined for the CPI field is all zeros" ::= { pportEntry 124 } pportAAL5LengthError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received AAL5 packets which satisfied one of the following error conditions: 1. number of received cells * 48 bytes - length value in trailer > 55 bytes 2. number of received cells * 48 bytes - length value in trailer < 8 bytes" ::= { pportEntry 125 } pportAAL5ReassemblyTimerError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of expired reassembly timers" ::= { pportEntry 126 } pportAAL5MaxNrSegError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received AAL5 packets which exceeds the maximum allowed length" ::= { pportEntry 127 } pportRedundancyArch OBJECT-TYPE SYNTAX INTEGER { disabled (1), aps-intracard (2), aps-with-resilient-uni (3), aps-with-trunk-backup (4) } ACCESS read-write STATUS mandatory DESCRIPTION "Pport redundancy architecture. Default is disabled. aps-intracard -- ports are both on same card. aps-with-resilient-uni -- ports may be on different cards, resilient UNI is used to reroute traffic. aps-intercard-trunk-backup -- ports may be on different cards, aps keeps phy layer in sync w/trunk backup." ::= { pportEntry 128 } pportAPSadminDir OBJECT-TYPE SYNTAX INTEGER { uni-directional (1), bi-directional (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Provisioned APS switch-direction-mode. Default is uni- directional." ::= { pportEntry 129 } pportAPSlineType OBJECT-TYPE SYNTAX INTEGER { working-line (1), protection-line (2) } ACCESS read-write STATUS mandatory DESCRIPTION "APS line type for the pport. Writable only when pportRedundancyArch is disabled." ::= { pportEntry 130 } pportAPSrevertiveMode OBJECT-TYPE SYNTAX INTEGER { revertive (1), nonrevertive (2) } ACCESS read-write STATUS mandatory DESCRIPTION "APS revertive mode. When revertive, after the condition for an automatic switchover clears, user traffic will be switched back to the working line after the pportAPSwtrPeriod expires. Default is revertive." ::= { pportEntry 131 } pportAPSpairedSlotId OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "Slot ID of the paired-with APS pport. Writable only when pportRedundancyArch is disabled." ::= { pportEntry 132 } pportAPSpairedPportId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Pport ID of the paired-with APS pport. Writable only when pportRedundancyARch is disabled." ::= { pportEntry 133 } pportAPSsfBerThresh OBJECT-TYPE SYNTAX INTEGER (3..5) ACCESS read-write STATUS mandatory DESCRIPTION "Exponent N for APS Signal Failure based on BER. A line bit-error-rate above 10^-N causes an SF BER failure to be asserted. SF BER is cleared when the line BER returns to less than 10^-7." ::= { pportEntry 134 } pportAPSsdBerThresh OBJECT-TYPE SYNTAX INTEGER (6..9) ACCESS read-write STATUS mandatory DESCRIPTION "Exponent N for APS Signal Degrade based on BER. A line bit-error-rate above 10^-N causes an SD BER failure to be asserted. SD BER is cleared when the line BER returns to less than 10^-(N+1)." ::= { pportEntry 135 } pportAPSwtrPeriod OBJECT-TYPE SYNTAX INTEGER (5..12) ACCESS read-write STATUS mandatory DESCRIPTION "APS wait-to-restore period. The number of minutes to wait after an automatic switch condition clears before switching back to the working line." ::= { pportEntry 136 } pportAPSprotectionLineState OBJECT-TYPE SYNTAX INTEGER { released (1), selected (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state of the protection line selector. When selected, a protection switchover has taken place and user traffic is being selected from the protection line." ::= { pportEntry 137 } pportAPSxCommand OBJECT-TYPE SYNTAX INTEGER { clear (1), lockout-protection (2), forced-switch-w-to-p (3), forced-switch-p-to-w (4), manual-switch-w-to-p (5), manual-switch-p-to-w (6), exercise (7) } ACCESS read-write STATUS mandatory DESCRIPTION "External switch commands. The clear command clears any previously activated external command. Manual switch is preemptable by auto-switch-requests (line failures) while forced switch is not preemptable (except if the protection line fails). Manual and forced switch from protection to working, is valid only for 1+1 mode. Exercise simulates a switchover using APS signalling without actually performing a switch to protection line." ::= { pportEntry 138 } pportAPSconfigStatus OBJECT-TYPE SYNTAX INTEGER { not-configured (1), valid (2), invalid (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of APS pport configuration. The not-configured status indicates the pport APS feature is not configured or it is a non-APS pport. The valid state indicates the pport APS function is configured and has been validated by the APS manager. The invalid state indicates that the APS manager has detected a conflict between the working line and protection line pport configurations. The user must clear the invalid state by changing the configuration of the misconfigured pport as soon as possible. Check pportAPSadminDir, pportAPSlineType, pportAPSrevertiveMode, and pportAPSwtrPeriod for any misconfigurations." ::= { pportEntry 139 } pportAPSOperRxStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), testing (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the pair of APS pports with respect to the ability of the pair to Receive user traffic. When indicated as up, user traffic may be received on at least one of the ports in the APS pair." ::= { pportEntry 140 } pportBertPattern OBJECT-TYPE SYNTAX INTEGER { allZeros (1), allOnes (2), oneZero (3), oneOneZeroZero (4), oneOf8 (5), threeOf24 (6), qRSS (7), user1Byte (8), user2Byte (9), user3Byte (10), user4Byte (11) } ACCESS read-write STATUS mandatory DESCRIPTION "Pattern generated by the XBERT" ::= { pportEntry 141 } pportBertUserBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Definition of 1,2,3 or 4 byte pattern if UserNByte selected." ::= { pportEntry 142 } pportBertErrorRate OBJECT-TYPE SYNTAX INTEGER { none (1), tenMinusThree (2), tenMinusSix (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Error rate to insert in generated pattern." ::= { pportEntry 143 } pportBertCommand OBJECT-TYPE SYNTAX INTEGER { start (1), stop (2), clearCounters (3), injectError (4) } ACCESS read-write STATUS mandatory DESCRIPTION "Single shot commands to the BERT." ::= { pportEntry 144 } pportBertStatus OBJECT-TYPE SYNTAX INTEGER { unused (1), unavailable (2), outOfFrame (3), inFrame (4) } ACCESS read-only STATUS mandatory DESCRIPTION "Current status of the BERT for this channel." ::= { pportEntry 145 } pportBertBitCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of bits received - stops counting at 0xFFFFFFFF" ::= { pportEntry 146 } pportBertErrorCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of bits received in error- stops counting at 0xFFFFFFFF" ::= { pportEntry 147 } pportds1FELoopbackControl OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or Disables Far end loopback control of the switch. Enabled (2) = Loop up and down commands from far end equipment will be processed. Disabled (1) - loop up and down commands from far end equipment shall be ignored. This control does not affect the switch's transmission of loopback commands to the far end" ::= { pportEntry 148 } pportFT1DS0s OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "DS0 usage bitmask for Fractional T1/E1 data rates." ::= { pportEntry 149 } pportIMUXCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DS3 Inverse Multiplexer counter value - specifies number of idle cells to insert by the outbound process Hardware." ::= { pportEntry 150 } pportds1PMConfigThresh OBJECT-TYPE SYNTAX INTEGER { rfc1406 (1), itu-g826 (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The setting determines which standard is used for performance monitoring configuration thresholds" ::= { pportEntry 151 } pportIdleCellType OBJECT-TYPE SYNTAX INTEGER { atmforum (1), itu (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The setting determines the type of Idle/unassigned cell transmitted by the pport. 1 -- ATM Forum CLP=0, payload=6A 2 -- ITU CLP=1, payload=6A" ::= { pportEntry 152 } pportATMTcaInHECErrorUAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca ingress HEC error uncorrectable alert period (in min.)." DEFVAL { 15 } ::= { pportEntry 153 } pportATMTcaInHECErrorUThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca ingress HEC error uncorrectable threshold." DEFVAL { 1 } ::= { pportEntry 154 } pportATMTcaEBufOverflowCBRAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca egress buffer overflow CBR Alert period (in min)" DEFVAL { 15 } ::= { pportEntry 155 } pportATMTcaEBufOverflowCBRThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca egress buffer overflow CBR threshold." DEFVAL { 1 } ::= { pportEntry 156 } pportATMTcaEBufOverflowABRAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca egress buffer overflow ABR alert period (in min)" DEFVAL { 15 } ::= { pportEntry 157 } pportATMTcaEBufOverflowABRThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca egress buffer overflow ABR threshold." DEFVAL { 1 } ::= { pportEntry 158 } pportATMTcaEBufOverflowVBR1AlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca egress buffer overflow VBR1 alert period (in min)" DEFVAL { 15 } ::= { pportEntry 159 } pportATMTcaEBufOverflowVBR1Thresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca egress buffer overflow VBR1 threshold." DEFVAL { 1 } ::= { pportEntry 160 } pportATMTcaEBufOverflowVBR2AlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca egress buffer overflow VBR2 alert period (in min)" DEFVAL { 15 } ::= { pportEntry 161 } pportATMTcaEBufOverflowVBR2Thresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca egress buffer overflow VBR2 threshold." DEFVAL { 1 } ::= { pportEntry 162 } pportATMTcaInFramerFIFOOverflowAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca ingress framer FIFO overflow alert period (in min)" DEFVAL { 15 } ::= { pportEntry 163 } pportATMTcaInFramerFIFOOverflowThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca ingress framer FIFO overflow threshold." DEFVAL { 1 } ::= { pportEntry 164 } pportATMTcaELookupFailureAlertPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca egress lookup failure alert period (in min)" DEFVAL { 15 } ::= { pportEntry 165 } pportATMTcaELookupFailureThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca egress lookup failure threshold." DEFVAL { 1 } ::= { pportEntry 166 } pportATMTcaEnable OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ATM tca port enable." ::= { pportEntry 167 } pportATMTcaId OBJECT-TYPE SYNTAX INTEGER { ingressHECErrorUThresholdC (1), egressCBRBufferOverflowC (2), egressABRBufferOverflowC (3), egressVBR1BufferOverflowC (4), egressVBR2BufferOverflowC (5), ingressFramerFIFOOverflowC (6), egressLookupFailureC (7) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the the most recently declared pport ATM threshold crossing alert" ::= { pportEntry 168 } pportFethAdminMacAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "The configured MAC address to use for this Fast Ethernet port. Setting this to all zeros will force the port to use the burned in MAC address." ::= { pportEntry 169 } pportFethOperMacAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "The actual MAC address in use for this Fast Ethernet port." ::= { pportEntry 170 } pportConfigAlarmSoakTime OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This is the soak time for configurable alarms. An alarm of this type must persist for this period before it is declared. The time is specified in millseconds units." ::= { pportEntry 171 } pportConfigAlarmClearTime OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This is the soak time for configurable alarms. An alarm of this type must remain clear for this period before it is declared to be cleared. The time is specified in millseconds units." ::= { pportEntry 172 } pportFethPortCapability OBJECT-TYPE SYNTAX INTEGER { fullDuplex100Mbps (1), halfDuplex100Mbps (2), fullDuplex10Mbps (3), halfDuplex10Mbps (4) } ACCESS read-write STATUS mandatory DESCRIPTION "Selection for the speed (10/100) and mode (half/full duplex) of operation for Fast Ethernet ports." ::= { pportEntry 173 } pportVpshapingDiscardCellCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cells discarded due to buffer overflow on this pport because of traffic shaping." ::= { pportEntry 174 } -- The traffic Shaper parameter table pportTrafficShaperTable OBJECT-TYPE SYNTAX SEQUENCE OF PportTrafficShaperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Parameters assigned to the 16 traffic shaper parameter conbinations of each pport of the ATM-IWU." ::= { pport 3 } pportTrafficShaperEntry OBJECT-TYPE SYNTAX PportTrafficShaperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information of a single system reference clock source." INDEX { pportSlotId, pportId, pportTrafficShaperIndex } ::= { pportTrafficShaperTable 1 } PportTrafficShaperEntry ::= SEQUENCE { pportTrafficShaperIndex INTEGER, pportTrafficShaperPriority INTEGER, pportTrafficShaperCellRatioDividend INTEGER, pportTrafficShaperCellRatioDivisor INTEGER, pportTrafficShaperPeak INTEGER, pportTrafficShaperCredit INTEGER } pportTrafficShaperIndex OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "A positive integer to identify an entry in the pportTrafficShaperTable. The ATM-IWU and CS cards support exactly 16 shapers." ::= { pportTrafficShaperEntry 1 } pportTrafficShaperPriority OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "The priority of the Shaper. Channels tied to a Shaper are served only if no higher priority Shapers await service. 0 ist the highest, 15 the lowest priority." ::= { pportTrafficShaperEntry 2 } pportTrafficShaperCellRatioDividend OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The quotient of pportTrafficShaperCellRatioDividend and pportTrafficShaperCellRatioDivisor determines the average rate allocated to the shaper. The shaper serves portTrafficShaperCellRatioDividend cells in pportTrafficShaperCellRatioDivisor cell times." ::= { pportTrafficShaperEntry 3 } pportTrafficShaperCellRatioDivisor OBJECT-TYPE SYNTAX INTEGER (1.. 16777215) ACCESS read-write STATUS mandatory DESCRIPTION "See pportTrafficShaperCellRatioDividend" ::= { pportTrafficShaperEntry 4 } pportTrafficShaperPeak OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The peak cell rate. It defines the minimum gap (in cell units) between emission of any consecutive cells in this channel." ::= { pportTrafficShaperEntry 5 } pportTrafficShaperCredit OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the maximum number of credits that can be accumulated by a shaper. This is equivalent to the maximum burst allowed at the peak rate." ::= { pportTrafficShaperEntry 6 } -- The Logical Port Group -- -- The variables that configure logical ports at a node -- lportTable OBJECT-TYPE SYNTAX SEQUENCE OF LportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of logical port entries. The number of entries is given by the value of ifNumber in MIB-II." ::= { lport 1 } lportEntry OBJECT-TYPE SYNTAX LportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The logical port entry contains objects relevant to a logical port." INDEX { lportIfIndex } ::= { lportTable 1 } LportEntry ::= SEQUENCE { lportIfIndex Index, lportSlotId INTEGER, lportPportId INTEGER, lportId INTEGER, lportLink INTEGER, lportProtocol INTEGER, lportSignal INTEGER, lportFt1Ds0s OCTET STRING, lportGlobalDlci INTEGER, lportDlcmiStd INTEGER, lportDlciAddrFmt INTEGER, lportDlciAddrLen INTEGER, lportMaxFramesize INTEGER, lportDceVerifTimer INTEGER, lportDceErrorThresh INTEGER, lportDceEventCount INTEGER, lportDteErrorThresh INTEGER, lportDteEventCount INTEGER, lportDtePollTimer INTEGER, lportDteFullCounter INTEGER, lportDteMulticast INTEGER, lportTrkRnode IpAddress, lportTrkRlport INTEGER, lportCongestState INTEGER, lportQP1Len INTEGER, lportQP2Len INTEGER, lportQP3Len INTEGER, lportQP4Len INTEGER, lportErrTime TimeTicks, lportErrType INTEGER, lportErrData OCTET STRING, lportDiagTestId INTEGER, lportDiagTestRuns INTEGER, lportDataRate INTEGER, lportTrkStatus INTEGER, lportSevCongests INTEGER, lportAbsCongests INTEGER, lportTrkOverhead INTEGER, lportTrkUtil INTEGER, lportVAvailbw INTEGER, lportTrkLastTimeChange TimeTicks, lportCongestRate INTEGER, lportCongestRateThresh INTEGER, lportDiagState INTEGER, lportDiagOptionStr OCTET STRING, lportDiagPassCount INTEGER, lportDiagFailCount INTEGER, lportDiagResultStr DisplayString, lportDs0BitStuff INTEGER, lportErrorThreshold INTEGER, lportUnsyncBandwidth INTEGER, lportDTEInStatusFrames Counter, lportDTEInFullStatusFrames Counter, lportDTEInAsyncStatusFrames Counter, lportDTEInErrorFrames Counter, lportDTEOutPollFrames Counter, lportDTEPollErrorCounts Counter, lportDTEFailCounts Counter, lportDTEFailReason INTEGER, lportDTEOperStatus INTEGER, lportDCEInPollFrames Counter, lportDCEInErrorFrames Counter, lportDCEOutStatusFrames Counter, lportDCEOutFullStatusFrames Counter, lportDCEOutAsyncStatusFrames Counter, lportDCEPollErrorCounts Counter, lportDCEFailCounts Counter, lportDCEFailReason INTEGER, lportDCEOperStatus INTEGER, lportDCEOperDlcmiStd INTEGER, lportLMIInErrorFrames Counter, lportDCEnN4 INTEGER, lportDCEnT3 INTEGER, lportXmitLatencyThreshold INTEGER, lportXmitRefillPriority0Percentage INTEGER, lportXmitRefillPriority1Percentage INTEGER, lportXmitRefillPriority2Percentage INTEGER, lportXmitRefillPriority3Percentage INTEGER, lportXmitDiscardLow INTEGER, lportSevereThreshold INTEGER, lportMildThreshold INTEGER, -- 82, 83, 84, 85 are deprecated -- These OID will be reused. lportTrkKeepAliveTimer INTEGER, lportTrkKeepAliveErrorThreshold INTEGER, lportIgCutThruStatus INTEGER, lportEgCutThruStatus INTEGER, lportEgCutThruThresh INTEGER, lportFrameRelayTrkEnable INTEGER, lportSmdsSsiIf INTEGER, lportSmdsSsiSlot INTEGER, lportSmdsScrnId INTEGER, lportSmdsIaScrnOp INTEGER, lportSmdsGaScrnOp INTEGER, lportSmdsIaScrnMap OCTET STRING, lportSmdsGaScrnMap OCTET STRING, lportSmdsTrkAddr OCTET STRING, lportSmdsCrc INTEGER, lportSmdsCpePoll INTEGER, lportSmdsPduCheck INTEGER, lportSmdsCntOutFrDxi2HbPolls Counter, lportSmdsCntOutByteDxi2HbPolls Counter, lportSmdsCntInFrDxi2HbPolls Counter, lportSmdsCntInByteDxi2HbPolls Counter, lportSmdsCntOutFrSip3s Counter, lportSmdsCntOutByteSip3s Counter, lportSmdsCntInFrSip3s Counter, lportSmdsCntInByteSip3s Counter, lportSmdsCntDxi2LinkIdInvalids Counter, lportSmdsCntDxi2StationIdInvalids Counter, lportSmdsCntDxi2CrInvalids Counter, lportSmdsCntDxi2AeInvalids Counter, lportSmdsCntDxi2CtrlInvalids Counter, lportSmdsCntDxi2FrameSizeErrors Counter, lportSmdsCntSip3RsvdInvalids Counter, lportSmdsCntSip3BetagMismatchs Counter, lportSmdsCntSip3BasizeIncorrects Counter, lportSmdsCntSip3BasizeInvalids Counter, lportSmdsCntSip3DaTypeInvalids Counter, lportSmdsCntSip3DaInvalids Counter, lportSmdsCntSip3SaTypeInvalids Counter, lportSmdsCntSip3SaInvalids Counter, lportSmdsCntSip3BasizeMismatchs Counter, lportSmdsCntSip3HeLenInvalids Counter, lportSmdsCntSip3HeVersionInvalids Counter, lportSmdsCntSip3HeCarrierInvalids Counter, lportSmdsCntSip3Crc32Errors Counter, lportSmdsCntSip3TRsvdInvalids Counter, lportSmdsCntSaNotFounds Counter, lportSmdsCntSaValidationFails Counter, lportSmdsCntSaDaOnSamePorts Counter, lportSmdsCntDaSsiMismacths Counter, lportSmdsCntSsiProvisionErrors Counter, lportSmdsCntDstIaNotFounds Counter, lportSmdsCntDstGaNotFounds Counter, lportSmdsCntSrcIaScrnFails Counter, lportSmdsCntDstIaScrnFails Counter, lportSmdsCntDstGaScrnFails Counter, lportSmdsTotalDiscards Counter, lportSmdsSsiNode INTEGER, lportBilling INTEGER, lportSmdsReserved144 INTEGER, lportLinkStatus INTEGER, lportLMIDelay INTEGER, lportCRC INTEGER, lportSmdsMulticastGa OCTET STRING, lportSmdsMulticastIpAddr IpAddress, lportAtmVPI INTEGER, lportAtmVCI INTEGER, lportPeakCellRateindex INTEGER, lportSustCellRate INTEGER, lportBurstTolerance INTEGER, lportBuTrkOnFailure INTEGER, lportTrkFailureThrsh INTEGER, lportTrkRestThrsh INTEGER, lportBuTrkRetryInt INTEGER, lportBuTrkRetryNum INTEGER, lportBuTrkCycleInt INTEGER, lportTrkManualBu INTEGER, lportPrimTrk Index, lportInitCallSetup INTEGER, lportBuFailReason INTEGER, lportQ922Enable INTEGER, lportQ922State INTEGER, lportTrkPduRevision INTEGER, lportPVCMgrPduRevision INTEGER, lportDS0LoopStatus INTEGER, lportISDNDuration INTEGER, lportISDNSourceAddr OCTET STRING, lportISDNDestAddr OCTET STRING, lportISDNIpAddr IpAddress, lportISDNCallRejCause INTEGER, lportLastInvalidDLCI INTEGER, lportTrkProtState INTEGER, lportTrkTrafficMix INTEGER, lportNumVC INTEGER, lportTrkAdminCost INTEGER, lportPrivateNet INTEGER, lportTrkStaticDelay INTEGER, lportTrkDynamicDelay INTEGER, lportAtmDataRateQoS1 INTEGER, lportAtmDataRateQoS2 INTEGER, lportAtmDataRateQoS3 INTEGER, lportAtmDataRateQoS4 INTEGER, lportOutVAvailbwQoS1 INTEGER, lportOutVAvailbwQoS2 INTEGER, lportOutVAvailbwQoS3 INTEGER, lportOutVAvailbwQoS4 INTEGER, lportInVAvailbwQoS1 INTEGER, lportInVAvailbwQoS2 INTEGER, lportInVAvailbwQoS3 INTEGER, lportInVAvailbwQoS4 INTEGER, lportOutAllocbwQoS1 INTEGER, lportOutAllocbwQoS2 INTEGER, lportOutAllocbwQoS3 INTEGER, lportOutAllocbwQoS4 INTEGER, lportInAllocbwQoS1 INTEGER, lportInAllocbwQoS2 INTEGER, lportInAllocbwQoS3 INTEGER, lportInAllocbwQoS4 INTEGER, lportDynamicQoSbw INTEGER, lportSVCRetryTimer INTEGER, lportAtmNetworkType INTEGER, lportAtmRouteMetricQoS1 INTEGER, lportAtmRouteMetricQoS2 INTEGER, lportAtmRouteMetricQoS3 INTEGER, lportAtmRouteMetricQoS4 INTEGER, lportIlmiPollTimeout INTEGER, lportAtmProtocol INTEGER, lportIlmiAdminStatus INTEGER, lportIlmiOperStatus INTEGER, lportIlmiPollRetry Counter, lportAtmVpiBits INTEGER, lportAtmVciBits INTEGER, lportAtmOamAlarmEnable INTEGER, lportInVAvailbw INTEGER, lportbwUNIPolicy INTEGER, lportStarvation INTEGER, lportRecOverflow INTEGER, lportLossOfCellSequence INTEGER, lportLossOfStructurePointer INTEGER, lportCbrInsDummyCells Counter, lportRecFifoUnderflowCnt Counter, lportRecFifoOverflowCnt Counter, lportCbrLossOfStructurePointerCnt Counter, lportCbrLossOfCellSequenceCnt Counter, lportShaperId INTEGER, lportIlmiPrefixScreenMode INTEGER, lportSmdsPduViolTca INTEGER, lportSmdsPduViolThresh INTEGER, lportSmdsPduHdrSip3SaNotFound OCTET STRING, lportSmdsPduHdrSip3SaDaOnSamePort OCTET STRING, lportSmdsPduHdrSip3DstGaNotFound OCTET STRING, lportSmdsPduHdrSip3DstIaScrnFail OCTET STRING, lportSmdsPduHdrSip3SaValFail OCTET STRING, lportSmdsPduHdrSip3DstIaNotFound OCTET STRING, lportSmdsPduHdrSip3SrcIaScrnFail OCTET STRING, lportSmdsPduHdrSip3DstGaScrnFail OCTET STRING, lportSmdsPduHdrSip3SaTypeInvalid OCTET STRING, lportSmdsPduHdrSip3DaTypeInvalid OCTET STRING, lportSmdsPduHdrDxi2LinkIdInvalid OCTET STRING, lportSmdsPduHdrDxi2CrInvalid OCTET STRING, lportSmdsPduHdrDxi2CtrlInvalid OCTET STRING, lportSmdsPduHdrDxi2StationIdInvalid OCTET STRING, lportSmdsPduHdrDxi2AeInvalid OCTET STRING, lportDS0FarendLpbkEnabled INTEGER, lportDS0FarendLpbkDisabled INTEGER, lportTrkProtFailureThreshold INTEGER, lportPtr OCTET STRING, lportISDNPoolUtil INTEGER, lportISDNIpAddrAssignFail INTEGER, lportTrkUtilQoS1 INTEGER, lportTrkUtilQoS2 INTEGER, lportTrkUtilQoS3 INTEGER, lportTrkUtilQoS4 INTEGER, lportInCells Counter, lportOutCells Counter } lportIfIndex OBJECT-TYPE SYNTAX Index ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex value of the corresponding ifEntry." ::= { lportEntry 1 } lportSlotId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number of the board the port is on." ::= { lportEntry 2 } lportPportId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical port number of the interface on the board." ::= { lportEntry 3 } lportId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The logical port number of the interface on the physical port. A logical port can be uniquely identified in a Cascade network as { NodeId.lportSlotId.lportPportId.lportId }. lportId is defaulted to 1 (i.e., one-to-one mapping between the physical port and the logical port such as local V.35 or carrier) except the following cases: - For ufr, nfr and trk logical port, it indicates the bundle number for fractional T1 or 24-bundle T1. - For pdntrk logical port, it indicates the dlci over the PDN. Note that pdntrk is not allowed on fractional T1 or 24-bundle T1 physical port." ::= { lportEntry 4 } lportLink OBJECT-TYPE SYNTAX INTEGER { -- user (0), -- user link: connecting to non-casc trk (1), -- trunk: connecting to casc switch transport (2) -- transport: connecting 2 FR networks using one circuit } ACCESS read-write STATUS mandatory DESCRIPTION "The equipment type of the peer to which the logical port is connected." ::= { lportEntry 5 } lportProtocol OBJECT-TYPE SYNTAX INTEGER { -- fr (0), -- frame relay protocol nfr (1), -- non-frame relay protocol -- (direct frad usr port or casc trunk) fradPPPto1294 (2), -- xlation frad, PPP-to-1294 smds(3), -- SMDS atm (4), -- ATM user-network isdndchan (5), -- ISDN pri d-channel dirmgmttrk(7), -- Direct management trunk for SMDS smdsoptmgmt(8), -- SMDS OPT management trunk atmAAL1(10) -- ATM AAL1 (CBR) connections } ACCESS read-write STATUS mandatory DESCRIPTION "The data link protocol running on the logical port." ::= { lportEntry 6 } lportSignal OBJECT-TYPE SYNTAX INTEGER { dce (1), -- network side dte (2), -- user side nni (3) -- bi-directional, both network & user } ACCESS read-write STATUS mandatory DESCRIPTION "The user-network signalling capability for SVC and DLCMI of the logical port. Note that this only applies to fr protocol port." ::= { lportEntry 7 } lportFt1Ds0s OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The bit mask indicating the DS0s for the fractional T1/E1 logical port which must be a subset of the corresponding pportDs1Ds0s. It's represented by a 32-bit hex char string." ::= { lportEntry 8 } lportGlobalDlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The global DLCI correspondent to the interface if the DLCI is globally significant in the network. Note that this object is read-write only during creation, and read-only after creation." ::= { lportEntry 9 } lportDlcmiStd OBJECT-TYPE SYNTAX INTEGER { -- not-applicable (0), -- Not applicable, for example, on a trunk disabled (1), lmiRev1 (2), ansiT1-617-D (3), -- ANSI T1.617 Annex D ccittQ-933-A (4), -- CCITT Q.933 Annex A autodetect (5), -- Auto Detection ansiT1-617-B (6) -- ANSI T1.617 Annex B } ACCESS read-write STATUS mandatory DESCRIPTION "This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame Relay interface." ::= { lportEntry 10 } lportDlciAddrFmt OBJECT-TYPE SYNTAX INTEGER { q922 (1) -- 10-bit (CCITT Standard) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable states which address format is in use on the Frame Relay interface." ::= { lportEntry 11 } lportDlciAddrLen OBJECT-TYPE SYNTAX INTEGER { two-octets-10-bits (1), -- Current Standard three-octets-10-bits (2), three-octets-16-bits (3), four-octets-17-bits (4), four-octets-23-bits (5) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address including the control portion." ::= { lportEntry 12 } lportMaxFramesize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum frame size supported on the interface. Currently it's not used." ::= { lportEntry 13 } lportDceVerifTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The polling verification timer (secs) on the DCE interface. If the port is configured as a DXI/SNI, then this MIB object defines the heartbeat poll timer setting." ::= { lportEntry 14 } lportDceErrorThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The error threshold on the DCE interface. If the port is configured as a DXI/SNI, then this MIB object defines the heartbeat poll No Ack threshold setting." ::= { lportEntry 15 } lportDceEventCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The monitored events count on the DCE interface." ::= { lportEntry 16 } lportDteErrorThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The error threshold on the DTE interface." ::= { lportEntry 17 } lportDteEventCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The monitored events count on the DTE interface." ::= { lportEntry 18 } lportDtePollTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The link status polling timer (secs) on the DTE interface." ::= { lportEntry 19 } lportDteFullCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The full status polling counter on the DTE interface." ::= { lportEntry 20 } lportDteMulticast OBJECT-TYPE SYNTAX INTEGER { one-way (1), two-way (2), m-way (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The multicast capability of the interface." ::= { lportEntry 21 } lportTrkRnode OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Node at the other end of the trunk. This object is read-write only during lport creation, and read-only thereafter." ::= { lportEntry 22 } lportTrkRlport OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Logical port (IfIndex) at the other end of the trunk. This " ::= { lportEntry 23 } lportCongestState OBJECT-TYPE SYNTAX INTEGER { normal (1), -- below "knee" point mild (2), -- between "knee" & "cliff" points severe (3), -- above "cliff" point critical (4) -- xmit queue is full } ACCESS read-only STATUS mandatory DESCRIPTION "Congestion State for the logical port." ::= { lportEntry 24 } lportQP1Len OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Priority-1 queue length (number of packets) in xmit buffer." ::= { lportEntry 25 } lportQP2Len OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Priority-2 queue length (number of packets) in xmit buffer." ::= { lportEntry 26 } lportQP3Len OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Priority-3 queue length (number of packets) in xmit buffer." ::= { lportEntry 27 } lportQP4Len OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Priority-4 queue length (number of packets) in xmit buffer." ::= { lportEntry 28 } lportErrTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at which the last error was detected." ::= { lportEntry 29 } lportErrType OBJECT-TYPE SYNTAX INTEGER { short-frame (1), hdlc-abort (2), residual-bit (3), crc-Error (4), rcv-Long (5), rcv-overrun (6), tx-underrun (7), unknownError (8), illegalDLCI (9), unknownDLCI (10), dlcmiProtoErr (11), dlcmiUnknownIE (12), dlcmiSequenceErr (13), dlcmiUnknownRpt (14), unknownProt (15), discardFW (16), discardRange (17), discardPortMismatch (18), discardIllegalLen (19) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of error that was last seen on this interface." ::= { lportEntry 30 } lportErrData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "An octet string containing as much of the error packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desirable to include all information up to the PDU." ::= { lportEntry 31 } lportDiagTestId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Identification for the diagnostics tests to be run." ::= { lportEntry 32 } lportDiagTestRuns OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of passes of the diagnostics tests to be run. The default value is 1." ::= { lportEntry 33 } lportDataRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An estimate of the logical port's data rate in bits per second." ::= { lportEntry 34 } lportTrkStatus OBJECT-TYPE SYNTAX INTEGER { -- ndown (0), nattempt (1), ninit (2), n2way (3), nexstart (4), nexchange (5), nloading (6), nfull (7), btdefined (9) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the trunk. The btdefined state only applies to backup trunks." ::= { lportEntry 35 } lportSevCongests OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cumulative number of times that the lport's congestion state has changed from mildly-congested to severely-congested since the last reset." ::= { lportEntry 36 } lportAbsCongests OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cumulative number of times that the lport's congestion state has changed from severely-congested to absolutely- congested since the last reset." ::= { lportEntry 37 } lportTrkOverhead OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An estimate of the overhead (headers and internal control messages) in trunking user data in terms of a percentage of the configured trunk bandwidth." ::= { lportEntry 38 } lportTrkUtil OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An estimate of the real utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth." ::= { lportEntry 39 } lportVAvailbw OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Currently available virtual trunk bandwidth." ::= { lportEntry 40 } lportTrkLastTimeChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The sysUpTime value when the trunk was last changed to the current status." ::= { lportEntry 41 } lportCongestRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The rate (%) of entering severely or absolutely congested states in the last one minute interval." ::= { lportEntry 42 } lportCongestRateThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The alert threshold (%) for the CongestRate; trap will be sent when exceeded." ::= { lportEntry 43 } lportDiagState OBJECT-TYPE SYNTAX INTEGER { -- inactive (0), active(1) } ACCESS read-write STATUS mandatory DESCRIPTION "The current state of the diagnostic on this logical port." ::= { lportEntry 44 } lportDiagOptionStr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Optional parameters to the diagnostic." ::= { lportEntry 45 } lportDiagPassCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of successful diagnostic passes." ::= { lportEntry 46 } lportDiagFailCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of failed diagnostic passes." ::= { lportEntry 47 } lportDiagResultStr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of last diagnostic failure." ::= { lportEntry 48 } lportDs0BitStuff OBJECT-TYPE SYNTAX INTEGER { -- no-bit-stuffing (0), bit-stuffing (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Is bit stuffing enabled on this lport?" ::= { lportEntry 49 } lportErrorThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The per minute error threshold before a link error trap is sent." ::= { lportEntry 50 } lportUnsyncBandwidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The accumulated allocated/deallocated bandwidth which has not been propagated by OSPF yet." ::= { lportEntry 51 } lportDTEInStatusFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LMI STATUS frames received from the DCE since the last system reset. The count includes link integrity verification frames only." ::= { lportEntry 52 } lportDTEInFullStatusFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LMI Full STATUS frames received from the DTE since the last system reset." ::= { lportEntry 53 } lportDTEInAsyncStatusFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of asynchronous LMI Status frames received from the DTE since the last system reset. For LMI Rev 1, these are Update STATUS frames. For ANSI Annex D and CCITT Annex A these are Asynchronous STATUS frames." ::= { lportEntry 54 } lportDTEInErrorFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LMI frames received containing protocol errors." ::= { lportEntry 55 } lportDTEOutPollFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LMI Status Enquiry frames transmitted since the last system reset." ::= { lportEntry 56 } lportDTEPollErrorCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of DTE in-channel signaling link reliability errors (i.e. LMI Status Enquiry frames that were not responded to, sequence number errors) since the last system reset." ::= { lportEntry 57 } lportDTEFailCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times since the last system reset LMI has declared the DTE side of the link down due to excessive errors." ::= { lportEntry 58 } lportDTEFailReason OBJECT-TYPE SYNTAX INTEGER { -- ok (0), -- no failure dte-bad-Nr (1), -- received Nr != Ns dte-timeout (2), -- timeout waiting for STATUS message prot-error (3) -- protocol error } ACCESS read-only STATUS mandatory DESCRIPTION "The LMI failure reason. If the rate of LMI detected errors exceeds the threshold, this contains the cause of the most recent error." ::= { lportEntry 59 } lportDTEOperStatus OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), up (1), down (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The operational status of the DTE side of LMI on this link." ::= { lportEntry 60 } lportDCEInPollFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LMI poll frames received from the DTE since the last system reset." ::= { lportEntry 61 } lportDCEInErrorFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LMI frames received containing protocol errors." ::= { lportEntry 62 } lportDCEOutStatusFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LMI STATUS frames transmitted since the last system reset. The count includes link integrity verification frames only." ::= { lportEntry 63 } lportDCEOutFullStatusFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LMI Full STATUS frames transmitted since the last system reset." ::= { lportEntry 64 } lportDCEOutAsyncStatusFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of asynchronous LMI Status frames transmitted since the last system reset. For LMI Rev 1, these are Update STATUS frames. For ANSI Annex D and CCITT Annex A these are Asynchronous STATUS frames." ::= { lportEntry 65 } lportDCEPollErrorCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of DCE in-channel signaling link reliability errors (i.e. timeouts waiting for LMI Status Enquiry frames, sequence number errors) since the last system reset." ::= { lportEntry 66 } lportDCEFailCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times since the last system reset LMI has declared the DCE side of the link down due to excessive errors." ::= { lportEntry 67 } lportDCEFailReason OBJECT-TYPE SYNTAX INTEGER { -- ok (0), -- no failure dce-bad-Nr (1), -- received Nr != Ns dce-timeout (2), -- timeout waiting for Status Enquiry -- message prot-error (3) -- protocol error } ACCESS read-only STATUS mandatory DESCRIPTION "The LMI failure reason. If the rate of LMI detected errors exceeds the threshold, this contains the cause of the most recent error." ::= { lportEntry 68 } lportDCEOperStatus OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), up (1), down (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The operational status of the DCE side of LMI on this link." ::= { lportEntry 69 } lportDCEOperDlcmiStd OBJECT-TYPE SYNTAX INTEGER { unknown (1), lmiRev1 (2), ansiT1-617-D (3), -- ANSI T1.617 Annex D ccittQ-933-A (4), -- CCITT Q.933 Annex A reserved (5), ansiT1-617-B (6) -- ANSI T1.617 Annex B } ACCESS read-only STATUS mandatory DESCRIPTION "This variable states which Data Link Connection Management scheme is actually being run on this link. This is used for DCE links configured for AutoDetect and indicates the LMI standard used in the last poll received from the DTE." ::= { lportEntry 70 } lportLMIInErrorFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of total frames received with an error. For NNI links this is the sum of lportDTEInErrorFrames and lportDCEInErrorFrames." ::= { lportEntry 71 } lportDCEnN4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable specifies the maximum number of LMI Status Enquiry frames that can be received from a DTE within time interval lportDCEnT3. This is only valid on lports using LMIREV1." ::= { lportEntry 72 } lportDCEnT3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable specifies the time interval (secs) used to determine if lportDCEnN4 an excess number (lportDCEnN4) of Status Enquiry messages are received. This is only valid on lports using LMIREV1." ::= { lportEntry 73 } lportXmitLatencyThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Outbound frames are allowed on the transmit commit queue when the commit queue falls below this threshold (in microseconds)." ::= { lportEntry 74 } lportXmitRefillPriority0Percentage OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Percentage of time the transmit queue is refilled in priority order 0, 1, 2, 3." ::= { lportEntry 75 } lportXmitRefillPriority1Percentage OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Percentage of time the transmit queue is refilled in priority order 1, 2, 3, 0." ::= { lportEntry 76 } lportXmitRefillPriority2Percentage OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Percentage of time the transmit queue is refilled in priority order 2, 3, 0, 1." ::= { lportEntry 77 } lportXmitRefillPriority3Percentage OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Percentage of time the transmit queue is refilled in priority order 3, 0, 1, 2." ::= { lportEntry 78 } lportXmitDiscardLow OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Priority holding queue low water discard threshold. Discarding stops when holding queue hits this level." ::= { lportEntry 79 } lportSevereThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Severe congestion level. Outbound red and amber packets are discarded when the transmit queue hits this threshold." ::= { lportEntry 80 } lportMildThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Mild congestion level. Outbound red packets are discarded when the transmit queue hits this threshold." ::= { lportEntry 81 } lportTrkKeepAliveTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Send a keep-alive packet after this many seconds. These packets are sent on trunk links only. The range is 0 thru 15, with zero meaning the keep-alive protocol is disabled. The default is one." ::= { lportEntry 86 } lportTrkKeepAliveErrorThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Declare the interface down after this many keep-alive packets in a row are missed. The default is five." ::= { lportEntry 87 } lportIgCutThruStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable ingress cut-thru on this user lport. Default is disabled." ::= { lportEntry 88 } lportEgCutThruStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable egress cut-thru on this user lport. Default is disabled." ::= { lportEntry 89 } lportEgCutThruThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Egress cut thru threshold - start transmitting a frame on a user port after this many segments have arrived." ::= { lportEntry 90 } lportFrameRelayTrkEnable OBJECT-TYPE SYNTAX INTEGER { allowed (1), not-allowed (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Allow Frame Relay Trunks on the user link." ::= { lportEntry 91 } lportSmdsSsiIf OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interface number of the SSI which this DXI/SNI is multiplexed to." ::= { lportEntry 92 } lportSmdsSsiSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The slot of the SSI which this DXI/SNI is multiplexed to." ::= { lportEntry 93 } lportSmdsScrnId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The ID of address screen for this interface." ::= { lportEntry 94 } lportSmdsIaScrnOp OBJECT-TYPE SYNTAX INTEGER { allow(1), disallow(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Individual address screen operation." ::= { lportEntry 95 } lportSmdsGaScrnOp OBJECT-TYPE SYNTAX INTEGER { allow(1), disallow(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Group address screen operation." ::= { lportEntry 96 } lportSmdsIaScrnMap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The individual address screen member bit map. For set request, the first byte is the operation : 1 for deleting, 2 for adding. The following bytes are the bit map. The bit position of each bit in this bit map represent a screen member ID. The most significant bit is corresponding to group address ID 1. For get response, The whole string is the bit map. " ::= { lportEntry 97 } lportSmdsGaScrnMap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The group address screen member bit map. For set request, the first byte is the operation : 1 for deleting, 2 for adding. The following bytes are the bit map. The bit position of each bit in this bit map represent a screen member ID. The most significant bit is corresponding to group address ID 1. For get response, The whole string is the bit map. " ::= { lportEntry 98 } lportSmdsTrkAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "SMDS address. For SSI feeder port, this address is the local address of all SMDS optimim paths associated with this SSI feeder port. For SSI Optimum path port, this address is the remote address of this SSI optimum path. The 4 most significant bits are 1100. The following 4 bits are 0001. The following 5 bytes are the 10 digits number in BCD format. The following 16 bits are padded with 1's" ::= { lportEntry 99 } lportSmdsCrc OBJECT-TYPE SYNTAX INTEGER { crc16(1), crc32(2) } ACCESS read-write STATUS mandatory DESCRIPTION "CRC which CPE generates." ::= { lportEntry 100 } lportSmdsCpePoll OBJECT-TYPE SYNTAX INTEGER { nopoll(1), poll(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether CPE supports heart beat poll or not." ::= { lportEntry 101 } lportSmdsPduCheck OBJECT-TYPE SYNTAX INTEGER { -- off (0), on (1) } ACCESS read-write STATUS mandatory DESCRIPTION "turn of/off the detailed SIP3 PDU error checking." ::= { lportEntry 102 } lportSmdsCntOutFrDxi2HbPolls OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of DXI2 heart beat poll frames transmitted." ::= { lportEntry 103 } lportSmdsCntOutByteDxi2HbPolls OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Total number of octets in DXI2 heart beat poll frames transmitted." ::= { lportEntry 104 } lportSmdsCntInFrDxi2HbPolls OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of DXI2 heart beat poll frames received." ::= { lportEntry 105 } lportSmdsCntInByteDxi2HbPolls OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Total number of octets in DXI2 heart beat poll frames received." ::= { lportEntry 106 } lportSmdsCntOutFrSip3s OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of SIP3 frames transmitted." ::= { lportEntry 107 } lportSmdsCntOutByteSip3s OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Total number of octets in SIP3 frames transmitted." ::= { lportEntry 108 } lportSmdsCntInFrSip3s OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of SIP3 frames received." ::= { lportEntry 109 } lportSmdsCntInByteSip3s OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Total number of octets in SIP3 frames received." ::= { lportEntry 110 } lportSmdsCntDxi2LinkIdInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that DXI2 link ID is invalid." ::= { lportEntry 111 } lportSmdsCntDxi2StationIdInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that DXI2 station ID is invalid." ::= { lportEntry 112 } lportSmdsCntDxi2CrInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that DXI2 command/response field is invalid." ::= { lportEntry 113 } lportSmdsCntDxi2AeInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that DXI2 address extension field is invalid." ::= { lportEntry 114 } lportSmdsCntDxi2CtrlInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that DXI2 control field is invalid." ::= { lportEntry 115 } lportSmdsCntDxi2FrameSizeErrors OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances there is a DXI2 frame size error." ::= { lportEntry 116 } lportSmdsCntSip3RsvdInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that SIP3 reserved field in header is invalid." ::= { lportEntry 117 } lportSmdsCntSip3BetagMismatchs OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that SIP3 BE tag is not macthed." ::= { lportEntry 118 } lportSmdsCntSip3BasizeIncorrects OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that SIP3 BA size is incorrect." ::= { lportEntry 119 } lportSmdsCntSip3BasizeInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that SIP3 BA size is invalid." ::= { lportEntry 120 } lportSmdsCntSip3DaTypeInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that SIP3 destination address type is invalid." ::= { lportEntry 121 } lportSmdsCntSip3DaInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that SIP3 destination address is invalid." ::= { lportEntry 122 } lportSmdsCntSip3SaTypeInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that SIP3 source address type is invalid." ::= { lportEntry 123 } lportSmdsCntSip3SaInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that SIP3 source address is invalid." ::= { lportEntry 124 } lportSmdsCntSip3BasizeMismatchs OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that SIP3 BA sizes in the header and trailer are not matched." ::= { lportEntry 125 } lportSmdsCntSip3HeLenInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that SIP3 header extension length is invalid." ::= { lportEntry 126 } lportSmdsCntSip3HeVersionInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that SIP3 header extension version is invalid." ::= { lportEntry 127 } lportSmdsCntSip3HeCarrierInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that SIP3 header extension carrier is invalid." ::= { lportEntry 128 } lportSmdsCntSip3Crc32Errors OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of SIP3 CRC errors." ::= { lportEntry 129 } lportSmdsCntSip3TRsvdInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that SIP3 reserved field in trailer is invalid." ::= { lportEntry 130 } lportSmdsCntSaNotFounds OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that source address not found." ::= { lportEntry 131 } lportSmdsCntSaValidationFails OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that source address validation failed." ::= { lportEntry 132 } lportSmdsCntSaDaOnSamePorts OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that source address and destination addresses are on the same port." ::= { lportEntry 133 } lportSmdsCntDaSsiMismacths OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Obsolete." ::= { lportEntry 134 } lportSmdsCntSsiProvisionErrors OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Obsolete." ::= { lportEntry 135 } lportSmdsCntDstIaNotFounds OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that destination individual address not found." ::= { lportEntry 136 } lportSmdsCntDstGaNotFounds OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that destination group address not found." ::= { lportEntry 137 } lportSmdsCntSrcIaScrnFails OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that source individual address screening failed." ::= { lportEntry 138 } lportSmdsCntDstIaScrnFails OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that destination individual address screening failed." ::= { lportEntry 139 } lportSmdsCntDstGaScrnFails OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Number of instances that destination group address screening failed." ::= { lportEntry 140 } lportSmdsTotalDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "total number of discards." ::= { lportEntry 141 } lportSmdsSsiNode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Node of the SSI which this DXI/SNI is multiplexed to." ::= { lportEntry 142 } lportBilling OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the ability to enable and disable billing on this logical port (for SMDS this must be a DXI). When the value of nodeBilling is 'enabled', the value of this object will take precedence. When the value of nodeBilling is 'disabled', the value of this object will be overridden and billing will be disabled. The default value of this object is 'disabled'. " ::= {lportEntry 143 } lportSmdsReserved144 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "reserved! ignore!" ::= { lportEntry 144 } lportLinkStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Link protocol status. The Link protocol may be frame relay LMI, DXI heart beat poll, PPP LCP, etc, depends on the lport type." ::= { lportEntry 145 } lportLMIDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds 1-9 to buffer (or initiate) a FR LMI async update (or ATM OAM alarms) to allow filtering of LMI async events. Zero (0) indicates that no buffering is done (all updates are immediate) and 255 indicates that no updates are sent." ::= { lportEntry 146 } lportCRC OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Lport CRC selection: 0 - 16 bit CRC 1 - 32 bit CRC" ::= { lportEntry 147 } lportSmdsMulticastGa OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " The Multicast Group Address is the smds broadcast address which is used to get smds address from its IP address." ::= { lportEntry 148 } lportSmdsMulticastIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " This IP address is this logical port's IP address. " ::= { lportEntry 149 } lportAtmVPI OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "VPI value in the ATM cell header: ATM DXI with HSSI IOP VPI (4 lsb bit) range: 0 - 15 ATM UNI DS3/E3 IOP VPI (4 lsb bit) range: 0 - 15" ::= { lportEntry 150 } lportAtmVCI OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "VCI value in the ATM cell header: ATM DXI with HSSI IOP VCI (6 lsb bit) range: 0 - 63 ATM UNI DS3/E3 IOP VCI (8 lsb bit) range: 0 - 255" ::= { lportEntry 151 } lportPeakCellRateindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak cell rate queue index" ::= { lportEntry 152 } lportSustCellRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Sustainable cell rate in cell/second" ::= { lportEntry 153 } lportBurstTolerance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Burst Tolerance in multiple of 32 cells" ::= { lportEntry 154 } lportBuTrkOnFailure OBJECT-TYPE SYNTAX INTEGER { -- disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or disables trunk backup due to link down." ::= { lportEntry 155 } lportTrkFailureThrsh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds a primary trunk must remain down for trunk backup to be initiated." ::= { lportEntry 156 } lportTrkRestThrsh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds a primary trunk must remain up for trunk backup to be terminated" ::= { lportEntry 157 } lportBuTrkRetryInt OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds between backup trunk call setup retries." ::= { lportEntry 158 } lportBuTrkRetryNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of backup trunk call setup tries per call setup cycle." ::= { lportEntry 159 } lportBuTrkCycleInt OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds between backup trunk call setup cycles." ::= { lportEntry 160 } lportTrkManualBu OBJECT-TYPE SYNTAX INTEGER { -- none (0), initCmd (1), termCmd (2), initSched (3), termSched (4) } ACCESS read-write STATUS mandatory DESCRIPTION "Initiate or terminate manual backup for a primary trunk. none neither initiate or terminate initCmd initiate operator commanded backup termCmd terminate operator commanded backup initSched initiate scheduled backup termSched terminate scheduled backup" ::= { lportEntry 161 } lportPrimTrk OBJECT-TYPE SYNTAX Index ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the primary trunk lportIfIndex for which a backup trunk is serving as a backup. This value is also used to determine trunk type by the following convention: Value Trunk Type 0 Normal lportIfIndex of this trunk Primary other lportIfIndex Backup" ::= { lportEntry 162 } lportInitCallSetup OBJECT-TYPE SYNTAX INTEGER { -- false (0), true (1) } ACCESS read-write STATUS mandatory DESCRIPTION "TRUE if node must initiate backup trunk call setup for this primary trunk. Otherwise FALSE." ::= { lportEntry 163 } lportBuFailReason OBJECT-TYPE SYNTAX INTEGER { -- none (0), buTrkNotDef (1), buTrkNotEstab (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the reason for the failure to perform trunk backup." ::= { lportEntry 164 } lportQ922Enable OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set 1 to eanble Q.922 on this port. Q.922 must be enabled if the port is used for SVC." ::= { lportEntry 165 } lportQ922State OBJECT-TYPE SYNTAX INTEGER { -- uninitialized (0), tei-unassigned (1), assign-awaiting (2), establish-awaiting (3), tei-assigned (4), awaiting-establishment (5), awaiting-release (6), multiple-frame-established (7), timer-recovery (8) } ACCESS read-only STATUS mandatory DESCRIPTION "Q.922 state. This object only makes sense when Q.922 is enabled." ::= { lportEntry 166 } lportTrkPduRevision OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Trunk PDU Revision number being used over this trunk." ::= { lportEntry 167 } lportPVCMgrPduRevision OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The PVC Manager PDU Revision number being used over this trunk." ::= { lportEntry 168 } lportDS0LoopStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this logical port has one or more DS0's in loopback" ::= { lportEntry 169 } lportISDNDuration OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds that the ISDN call has been established." ::= { lportEntry 170 } lportISDNSourceAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The E.164 address of the source of this ISDN connection." ::= { lportEntry 171 } lportISDNDestAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The E.164 address of the destination of this ISDN connection." ::= { lportEntry 172 } lportISDNIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Ip Address of the client connected to this B-Channel" ::= { lportEntry 173 } lportISDNCallRejCause OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cause of the call rejection - inability to authenticate or pool is busy." ::= { lportEntry 174 } lportLastInvalidDLCI OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This item pertains to user frame relay lports only. The frame relay header of the received frame contains a dlci, which uniquely identifies a specific pvc on this lport. When no pvc has been configured, on the lport, that corresponds to the dlci specified in the frame header, the frame is said to have an invalid dlci. This lport entry holds the value of the most recent invalid dlci received on this lport, to be used in troubleshooting faulty configurations." ::={ lportEntry 175 } lportTrkProtState OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2), none (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational state of the link trunk protocol on this link." ::={ lportEntry 176 } lportTrkTrafficMix OBJECT-TYPE SYNTAX INTEGER { normal (1), management-only (2), management-and-PVCs (3), private (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The types of traffic allowed over a Cascade trunk." ::= { lportEntry 177 } lportNumVC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of VCs going to or through a particular port." ::={ lportEntry 178 } lportTrkAdminCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The administrative cost of the trunk. Used when routing circuits. Trunks with lower costs are preferred. Value ranges from 1 to 65,535." ::= { lportEntry 179 } lportPrivateNet OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "If non-zero, indicates the private network that the lport belongs to. If 0, the lport is publicly shared." ::= { lportEntry 180 } lportTrkStaticDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The measured round-trip delay of the trunk, in milliseconds. Measured when the trunk last became operational." ::= { lportEntry 181 } lportTrkDynamicDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The recently measured round-tip delay of the trunk. May vary from lportTrkStaticDelay due to congestion, or reprovisioning of the underlying media." ::= { lportEntry 182 } lportAtmDataRateQoS1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An estimate of the logical port's data rate in bits per second reserved for QoS class 1." ::= { lportEntry 183 } lportAtmDataRateQoS2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An estimate of the logical port's data rate in bits per second reserved for QoS class 2." ::= { lportEntry 184 } lportAtmDataRateQoS3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An estimate of the logical port's data rate in bits per second reserved for QoS class 3." ::= { lportEntry 185 } lportAtmDataRateQoS4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An estimate of the logical port's data rate in bits per second reserved for QoS class 4." ::= { lportEntry 186 } lportOutVAvailbwQoS1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current outgoing available virtual bandwidth reserved for QoS class 1." ::= { lportEntry 187 } lportOutVAvailbwQoS2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current outgoing available virtual bandwidth reserved for QoS class 2." ::= { lportEntry 188 } lportOutVAvailbwQoS3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current outgoing available virtual bandwidth reserved for QoS class 3." ::= { lportEntry 189 } lportOutVAvailbwQoS4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current outgoing available virtual bandwidth reserved for QoS class 4." ::= { lportEntry 190 } lportInVAvailbwQoS1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current incoming available virtual bandwidth reserved for QoS class 1." ::= { lportEntry 191 } lportInVAvailbwQoS2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current incoming available virtual bandwidth reserved for QoS class 2." ::= { lportEntry 192 } lportInVAvailbwQoS3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current incoming available virtual bandwidth reserved for QoS class 3." ::= { lportEntry 193 } lportInVAvailbwQoS4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Currently incoming available virtual bandwidth reserved for QoS class 4." ::= { lportEntry 194 } lportOutAllocbwQoS1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current outgoing allocated bandwidth for QoS Class 1." ::= { lportEntry 195 } lportOutAllocbwQoS2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current outgoing allocated bandwidth for QoS Class 2." ::= { lportEntry 196 } lportOutAllocbwQoS3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current outgoing allocated bandwidth for QoS Class 3." ::= { lportEntry 197 } lportOutAllocbwQoS4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current outgoing allocated bandwidth for QoS Class 4." ::= { lportEntry 198 } lportInAllocbwQoS1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current incoming allocated bandwidth for QoS Class 1." ::= { lportEntry 199 } lportInAllocbwQoS2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current incoming allocated bandwidth for QoS Class 2." ::= { lportEntry 200 } lportInAllocbwQoS3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current incoming allocated bandwidth for QoS Class 3." ::= { lportEntry 201 } lportInAllocbwQoS4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current incoming allocated bandwidth for QoS Class 4." ::= { lportEntry 202 } lportDynamicQoSbw OBJECT-TYPE SYNTAX INTEGER { qos-class-1(1), qos-class-2(2), qos-class-3(4), qos-class-4(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Bitmap defining which QoS Classes should have bandwidth allocated dynamically from lportDataRate instead of reserving a percentage up-front." ::= { lportEntry 203 } lportSVCRetryTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The duration in seconds (1..255) the network is allowed to re-establish a SVC after network failure before clearing the SVC. A value of (0) indicates continuous retries by the network until the user clears the SVC." ::= { lportEntry 204 } lportAtmNetworkType OBJECT-TYPE SYNTAX INTEGER { private (1), public (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether this lport is supporting a private or public network." ::= { lportEntry 205 } lportAtmRouteMetricQoS1 OBJECT-TYPE SYNTAX INTEGER { administrative-cost (1), end-to-end-delay (2), cell-delay-variation (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Routing metric associated with QoS Class 1." ::= { lportEntry 206 } lportAtmRouteMetricQoS2 OBJECT-TYPE SYNTAX INTEGER { administrative-cost (1), end-to-end-delay (2), cell-delay-variation (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Routing metric associated with QoS Class 2." ::= { lportEntry 207 } lportAtmRouteMetricQoS3 OBJECT-TYPE SYNTAX INTEGER { administrative-cost (1), end-to-end-delay (2), cell-delay-variation (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Routing metric associated with QoS Class 3." ::= { lportEntry 208 } lportAtmRouteMetricQoS4 OBJECT-TYPE SYNTAX INTEGER { administrative-cost (1), end-to-end-delay (2), cell-delay-variation (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Routing metric associated with QoS Class 4." ::= { lportEntry 209 } lportIlmiPollTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The duration in seconds (1..255) the ILMI poll is generated by the network-side UME. A value of 0 set to default polling period of 5 seconds." ::= { lportEntry 210 } lportAtmProtocol OBJECT-TYPE SYNTAX INTEGER { uni-30 (1), uni-31 (2), iisp (3) } ACCESS read-write STATUS mandatory DESCRIPTION "UNI protocol version for this port." ::= { lportEntry 211 } lportIlmiAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Administrative state for ILMI function on this port." ::= { lportEntry 212 } lportIlmiOperStatus OBJECT-TYPE SYNTAX INTEGER { down (1), registering (2), up (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Operational status for ILMI function on this port." ::= { lportEntry 213 } lportIlmiPollRetry OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "The number of retries of ILMI poll request will be generated when network-side UME detects loss of ILMI connectivity. A value of 0 sets to default value of 4 times" ::= { lportEntry 214 } lportAtmVpiBits OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of bits of VPI supported." ::= { lportEntry 215 } lportAtmVciBits OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of bits of VCI supported." ::= { lportEntry 216 } lportAtmOamAlarmEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If disabled then OAM alarms are not generated for circuits that are down on this lport." ::= { lportEntry 217 } lportInVAvailbw OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Currently available Incoming virtual bandwidth." ::= { lportEntry 218 } lportbwUNIPolicy OBJECT-TYPE SYNTAX INTEGER { enable-uni-bw-policing(1), disable-uni-bw-policing(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The network policy towards requiring sufficient bandwidth at the UNI interface prior to allowing a circuit to be established." ::= { lportEntry 219 } lportStarvation OBJECT-TYPE SYNTAX INTEGER { ok(1), error(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The CBR card detected a starvation condition on this lport for the extended period defined in Bellcore TA-NWT-001248" ::= { lportEntry 220 } lportRecOverflow OBJECT-TYPE SYNTAX INTEGER { ok(1), error(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The CBR card detected a receive overflow condition on this lport for the extended period defined in Bellcore TA-NWT-001248" ::= { lportEntry 221 } lportLossOfCellSequence OBJECT-TYPE SYNTAX INTEGER { ok(1), error(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The CBR card detected a LOS condition on this lport for the extended period defined in Bellcore TA-NWT-001248" ::= { lportEntry 222 } lportLossOfStructurePointer OBJECT-TYPE SYNTAX INTEGER { ok(1), error(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The CBR card detected a loss of structure pointer condition on this lport for the extended period defined in Bellcore TA-NWT-001248" ::= { lportEntry 223 } lportCbrInsDummyCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of dummy cells inserted due to cell loss on a constant bit rate (AAL1) interface." ::= { lportEntry 224 } lportRecFifoUnderflowCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of receive FIFO underflows since the last reset. If this condition persists, a lportCBRLineDataError trap is issued indicating the lportStarvation." ::= { lportEntry 225 } lportRecFifoOverflowCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of receive FIFO overflows since the last reset. If this condition persists, a lportCBRLineDataError trap is issued indicating the receive FIFO overflow." ::= { lportEntry 226 } lportCbrLossOfStructurePointerCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The object counts how often the structured CBR card detected a loss of the structure pointer since the last reset." ::= { lportEntry 227 } lportCbrLossOfCellSequenceCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of loss of cell sequence since the last reset." ::= { lportEntry 228 } lportShaperId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The shaper to be used for this ATM trunk interworking with frame relay: 1-port ATM-IWU STM-1/STS-3c card -------------------------------- Values: 1..16" ::= { lportEntry 229 } lportIlmiPrefixScreenMode OBJECT-TYPE SYNTAX INTEGER { node-prefix (1), port-prefix (2), node-prefix-or-port-prefix (3), reject-all (127), accept-all (255) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of screening to apply against dynamic prefixes received from the peer ILMI entity at this DTE port." ::= { lportEntry 230 } lportSmdsPduViolTca OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the ability to enable and disable SMDS pdu violation traps on this logical port. This functionality applies to the following logical port types: SMDS DXI/SNI DCE SMDS DXI/SNI DTE SMDS SSI DTE SMDS Optimum Trunk Direct Line Trunk The default value of this object is 'disabled'. " ::= {lportEntry 231 } lportSmdsPduViolThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the Smds pdu violation threshold for this logical port. The allowable range of threshold values is 1-255. The default value of this object is '10'. " ::= { lportEntry 232 } lportSmdsPduHdrSip3SaNotFound OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Not Found. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address. " ::= { lportEntry 233 } lportSmdsPduHdrSip3SaDaOnSamePort OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Da On Same Port. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address. " ::= { lportEntry 234 } lportSmdsPduHdrSip3DstGaNotFound OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ga Not Found. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address. " ::= { lportEntry 235 } lportSmdsPduHdrSip3DstIaScrnFail OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ia Scrn Fail. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address. " ::= { lportEntry 236 } lportSmdsPduHdrSip3SaValFail OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Val Fail. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address. " ::= { lportEntry 237 } lportSmdsPduHdrSip3DstIaNotFound OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ia Not Found. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address. " ::= { lportEntry 238 } lportSmdsPduHdrSip3SrcIaScrnFail OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Src Ia Scrn Fail. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address. " ::= { lportEntry 239 } lportSmdsPduHdrSip3DstGaScrnFail OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ga Scrn Fail. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address. " ::= { lportEntry 240 } lportSmdsPduHdrSip3SaTypeInvalid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Type Invalid. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address. " ::= { lportEntry 241 } lportSmdsPduHdrSip3DaTypeInvalid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Da Type Invalid. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address. " ::= { lportEntry 242 } lportSmdsPduHdrDxi2LinkIdInvalid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Link Id Invalid. The length of this object is 4 bytes. " ::= { lportEntry 243 } lportSmdsPduHdrDxi2CrInvalid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Cr Invalid. The length of this object is 4 bytes. " ::= { lportEntry 244 } lportSmdsPduHdrDxi2CtrlInvalid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Ctrl Invalid. The length of this object is 4 bytes. " ::= { lportEntry 245 } lportSmdsPduHdrDxi2StationIdInvalid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Station Id Invalid. The length of this object is 4 bytes. " ::= { lportEntry 246 } lportSmdsPduHdrDxi2AeInvalid OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Ae Invalid. The length of this object is 4 bytes. " ::= { lportEntry 247 } lportDS0FarendLpbkEnabled OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Set a single DS0 into farend loopback 1-24." ::= { lportEntry 248 } lportDS0FarendLpbkDisabled OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Set a single DS0 out farend loopback 1-24." ::= { lportEntry 249 } lportTrkProtFailureThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The time, measured in seconds, that Trunk Protocol waits before transitioning the state of an unresponsive trunk from UP to DOWN. Trunk protocol keepalive requests are issued on the trunk lport once per second. This value defines the failure threshold, that is, the number of consecutive requests that must go unanswered before the Trunk Protocol application will declare the trunk lport DOWN." ::= { lportEntry 250 } lportPtr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "An octet string indicating the lport pointer." ::= { lportEntry 251 } lportISDNPoolUtil OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The percent utilization of the B-channel pool that this b-channel belongs to." ::= { lportEntry 252 } lportISDNIpAddrAssignFail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cause value for why Ip Address assignment has failed." ::= { lportEntry 253 } lportTrkUtilQoS1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An estimate of the real QoS1 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth." ::= { lportEntry 254 } lportTrkUtilQoS2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An estimate of the real QoS2 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth." ::= { lportEntry 255 } lportTrkUtilQoS3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An estimate of the real QoS3 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth." ::= { lportEntry 256 } lportTrkUtilQoS4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An estimate of the real QoS4 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth." ::= { lportEntry 257 } lportInCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of cells received" ::= { lportEntry 267 } lportOutCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of cells transmitted" ::= { lportEntry 268 } -- The Circuit Group -- -- The variables that configure and monitor circuits on a port. -- cktTable OBJECT-TYPE SYNTAX SEQUENCE OF CktEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing information about specific DLCIs, channels and corresponding circuits." ::= { ckt 1 } cktEntry OBJECT-TYPE SYNTAX CktEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The information regarding a single Data Link Connection Identifier." INDEX { cktSrcIfIndex, cktSrcDlci } ::= { cktTable 1 } CktEntry ::= SEQUENCE { cktSrcIfIndex Index, cktSrcDlci INTEGER, cktPriority INTEGER, cktCir INTEGER, cktBc INTEGER, cktBe INTEGER, cktDestNodeId INTEGER, cktDestIfIndex INTEGER, cktDestDlci INTEGER, cktTos INTEGER, cktOde INTEGER, cktAdminStatus INTEGER, cktCreationTime TimeTicks, cktLastTimeChange TimeTicks, cktVcState INTEGER, cktDceState INTEGER, cktDteStatus INTEGER, cktRnr INTEGER, cktNiDown INTEGER, cktDteState INTEGER, cktOperStatus INTEGER, cktOutForward INTEGER, cktRerouteCnt INTEGER, cktVcPtr OCTET STRING, cktHopCnt INTEGER, cktPath OCTET STRING, cktFailReason INTEGER, cktFailNode INTEGER, cktFailPort INTEGER, cktMcastGroupId INTEGER, cktMcastMemberList OCTET STRING, cktMcastParentGroups OCTET STRING, cktInFrames Counter, cktInDEFrames Counter, cktInODEFrames Counter, cktInFECNFrames Counter, cktInBECNFrames Counter, cktInDiscards Counter, cktInOctets Counter, cktInDEOctets Counter, cktInODEOctets Counter, cktOutFrames Counter, cktOutDEFrames Counter, cktOutODEFrames Counter, cktOutFECNFrames Counter, cktOutBECNFrames Counter, cktOutOctets Counter, cktOutDEOctets Counter, cktOutODEOctets Counter, cktOutLostFrames Counter, cktOutLostDEFrames Counter, cktOutLostODEFrames Counter, cktOutLostOctets Counter, cktOutLostDEOctets Counter, cktOutLostODEOctets Counter, cktRtMinDelay INTEGER, cktRtMaxDelay INTEGER, cktRtAvgDelay INTEGER, cktDiagTestId INTEGER, cktDiagTestRuns INTEGER, cktHelloCounter INTEGER, cktHelloAckCounter INTEGER, cktDefinedPath OCTET STRING, cktDefinedPathCount INTEGER, cktDefinedPathEnable INTEGER, cktDefinedPathAltOption INTEGER, cktUsingDefinedPath INTEGER, cktTryAltPath INTEGER, cktNotVirgin INTEGER, cktInForward INTEGER, cktBtusSeg INTEGER, cktInSegmentsDiscards Counter, cktAtmVPI INTEGER, cktAtmVCI INTEGER, cktType INTEGER, cktSvcCallingParty OCTET STRING, cktSvcCalledParty OCTET STRING, cktSvcDuration TimeTicks, cktSvcCause INTEGER, cktXlatFlag INTEGER, cktDestLaddr INTEGER, cktSrcLaddr INTEGER, cktLoop INTEGER, cktRerouteBalance INTEGER, cktCallingBackup INTEGER, cktRCir INTEGER, cktAtmQoS INTEGER, cktAtmInCells Counter, cktAtmOutCells Counter, cktAtmInDiscardedClp0Cells Counter, cktAtmInDiscardedClp1Cells Counter, cktAtmVcType INTEGER, cktAtmPCR INTEGER, cktAtmSCR INTEGER, cktAtmMBS INTEGER, cktAtmInPassedClp0Cells Counter, cktAtmInPassedClp1Cells Counter, cktAtmInTaggedCells Counter, cktAtmOutClp0Cells Counter, cktAtmOutClp1Cells Counter, cktAtmRQoS INTEGER, cktAtmTfdType INTEGER, cktAtmRTfdType INTEGER, cktAtmTfdParam1 INTEGER, cktAtmTfdParam2 INTEGER, cktAtmTfdParam3 INTEGER, cktAtmRTfdParam1 INTEGER, cktAtmRTfdParam2 INTEGER, cktAtmRTfdParam3 INTEGER, cktAtmFrameIWF INTEGER, cktAtmUserPlane INTEGER, cktRBc INTEGER, cktRBe INTEGER, cktOamLoopbackDirection INTEGER, cktOamLoopbackType INTEGER, cktOamLoopbackHops INTEGER, cktOamLoopbackCount INTEGER, cktOamLoopbackReceived Counter, cktOamLoopbackTimeouts Counter, cktOamLoopbackReceivedHigh INTEGER, cktOamLoopbackReceivedLow INTEGER, cktOamLoopbackReceivedAvg INTEGER, cktOamAlarmDisable INTEGER, cktShaperId INTEGER, cktOspfCtd INTEGER, cktOspfCdv INTEGER, cktOutPort INTEGER, cktOutVc INTEGER, cktRVc INTEGER, cktEntryType INTEGER, cktDiagStr OCTET STRING, cktSvcAalType INTEGER, cktSvcBBearerClass INTEGER, cktSvcBBearerClippingSusc INTEGER, cktSvcBBearerTmgReq INTEGER, cktSvcBBearerTfcType INTEGER, cktAtmUPCEnable INTEGER, cktRPriority INTEGER, cktRtPriority INTEGER, cktDeltaBc INTEGER, cktDeltaBe INTEGER, cktDeltaRBc INTEGER, cktDeltaRBe INTEGER, cktRedFrPcnt INTEGER, cktRedFrRPcnt INTEGER, cktRateEnforceSchm INTEGER, cktRateEnforceRSchm INTEGER, cktROde INTEGER, cktPrivateNet INTEGER, cktPrivateNetOverflow INTEGER, cktCustomerID INTEGER, cktAtmCDVT INTEGER, cktNdcEnable INTEGER, cktInterworkingFrToAtmCLP INTEGER, cktInterworkingFrToAtmDe INTEGER, cktNrtsCLP1 INTEGER, cktNrtsDiscardClp0 Counter, cktNrtsDiscardClp1 Counter, cktMPEnableAMF INTEGER, cktMPEligible INTEGER, cktMPForcedCaller INTEGER, cktMPForcedCallee INTEGER, cktFrameSize INTEGER, cktRFrameSize INTEGER, cktRNrtsCLP1 INTEGER, cktBBearerAtmTransferCapability INTEGER, cktAtmFrameDiscard INTEGER, cktRAtmFrameDiscard INTEGER, cktAbrFRMRTT INTEGER, cktAbrICR INTEGER, cktRAbrICR INTEGER, cktAbrRIF INTEGER, cktRAbrRIF INTEGER, cktAbrRDF INTEGER, cktRAbrRDF INTEGER, cktAbrTBE INTEGER, cktRAbrTBE INTEGER, cktAbrNRM INTEGER, cktRAbrNRM INTEGER, cktAbrTRM INTEGER, cktRAbrTRM INTEGER, cktAbrCDF INTEGER, cktRAbrCDF INTEGER, cktAbrADTF INTEGER, cktRAbrADTF INTEGER, cktAccumCTD INTEGER, cktAccumCDV INTEGER, cktAccumRCDV INTEGER, cktCLR INTEGER, cktRCLR INTEGER, cktAtmLijId INTEGER, cktAtmLijType INTEGER, cktRtLastDelay INTEGER, cktRtAccuMinDelay INTEGER, cktRtAccuMaxDelay INTEGER, cktRtAccuAvgDelay INTEGER, cktQosIntPeriod INTEGER, cktAtmOutOAMClp0Cells Counter, cktAtmOutOAMClp1Cells Counter, cktReqCTD INTEGER, cktInOctetsPeak Counter, cktOutOctetsPeak Counter, cktInDEOctetsPeak Counter, cktOutDEOctetsPeak Counter, cktInODEOctetsPeak Counter, cktOutODEOctetsPeak Counter, cktAdminCostThreshold INTEGER, cktAtmSvcServiceCategory INTEGER, cktAtmSvcRServiceCategory INTEGER, cktInterworkingFrToAtmEFCI INTEGER, cktDiagSARMon INTEGER, cktAdminCostReal INTEGER, cktAtmInClp0Cells Counter, cktAtmInClp1Cells Counter, cktATMAAL5CRC32Error Counter, cktATMAAL5CPIError Counter, cktATMAAL5LengthError Counter, cktATMAAL5ReassemblyTimerError Counter, cktATMAAL5MaxNrSegError Counter, cktIWF1490to1483Error Counter, cktIWF1490to1483LastBadHeader DisplayString, cktIWF1483to1490Error Counter, cktIWF1483to1490LastBadHeader DisplayString } cktSrcIfIndex OBJECT-TYPE SYNTAX Index ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex value of the corresponding ifEntry." ::= { cktEntry 1 } cktSrcDlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The DLCI used as the key for the circuit. For local DLCI significance, this is the local DLCI. For Global DLCI significance, this is the remote DLCI." ::= { cktEntry 2 } cktPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The priority level (1 through 3) for this circuit." ::= { cktEntry 3 } cktCir OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The average number of user data (bits) that the network agrees to transfer over the circuit in one direction, measured over the measurement interval T = cktBc/cktCir." ::= { cktEntry 4 } cktBc OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum amount of data (bits) that the network agrees to transfer over the circuit under normal conditions, during the measurement interval." ::= { cktEntry 5 } cktBe OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum amount of uncommitted data (bits) that the network will attempt to transfer over the circuit during the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed." ::= { cktEntry 6 } cktDestNodeId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The destination node ID for this circuit." ::= { cktEntry 7 } cktDestIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interface identifier at the destination node for this circuit." ::= { cktEntry 8 } cktDestDlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The DLCI which is the destination of the key DLCI. For local DLCI significance, this is the remote DLCI since the key DLCI is the local DLCI. For global significance, this is the local DLCI since the key DLCI is the remote DLCI." ::= { cktEntry 9 } cktTos OBJECT-TYPE SYNTAX INTEGER { committed (1), shared (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of service for the circuit. Only committed is supported in the FCS." ::= { cktEntry 10 } cktOde OBJECT-TYPE SYNTAX INTEGER { -- off (0), on (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable states whether graceful discard is enabled for the ckt." ::= { cktEntry 11 } cktAdminStatus OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), down (1), up (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the ckt." DEFVAL { up } ::= { cktEntry 12 } cktCreationTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when the circuit was created (activated)." ::= { cktEntry 13 } cktLastTimeChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The sysUpTime value when the circuit was last changed to the current state." ::= { cktEntry 14 } cktVcState OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), inactive (1), retry (2), calling (3), wcbdeact(4), wcbdelete(5), active (6), svcall (7), svclr (8), backedup (9), wcbbkdp (10), wcbreact (11), slowretry (12) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the PVC segment in the Cascade network." ::= { cktEntry 15 } cktDceState OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), inactive (1), active (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The DCE state of the circuit." ::= { cktEntry 16 } cktDteStatus OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), inactive (1), active (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The DTE status of the circuit." ::= { cktEntry 17 } cktRnr OBJECT-TYPE SYNTAX INTEGER { -- recvready (0), recvnotready (1) } ACCESS read-only STATUS mandatory DESCRIPTION "The receiver's readiness for accepting data flow." ::= { cktEntry 18 } cktNiDown OBJECT-TYPE SYNTAX INTEGER { -- niup (0), nidown (1) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the network interface." ::= { cktEntry 19 } cktDteState OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), inactive (1), active (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The DTE state of the circuit." ::= { cktEntry 20 } cktOperStatus OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), inactive (1), active (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational status of the entire PVC." ::= { cktEntry 21 } cktOutForward OBJECT-TYPE SYNTAX INTEGER { -- off (0), on (1) } ACCESS read-only STATUS mandatory DESCRIPTION "If the value is 1, it means the outbound flow is on." ::= { cktEntry 22 } cktRerouteCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The reroute count." ::= { cktEntry 23 } cktVcPtr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "An 8-byte Octect string indicating the vc pointer." ::= { cktEntry 24 } cktHopCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The count of hops along the circuit path. (Max is 16)" ::= { cktEntry 25 } cktPath OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The circuit path consisting a sequence of outbound interface indexes at nodes along the established circuit. The format is interface:interface:interface......" ::= { cktEntry 26 } cktFailReason OBJECT-TYPE SYNTAX INTEGER { -- none (0), admindown (1), novcbuff (2), nobw (3), noroute (4), timeout (5), nopdubuff (6), nodest (7), trkrnr (8), trkdown (9), balancereroute (10), dead(11), defpathreroute(12), nidown(13), otherpvcsegdown(14), otherpvcsegrnr(15), usingaltpathwarning(16), iopdown(17), numsgbuffer(18), noport(19), misconfig(20), svcsetupfail(21), srcbackedup(22), srcunknown(23), dstunknown(24), bkpdlcicollision(25), oldrevinpath(26), smdsmgmttrunk(27), nevercalled(28), bothendptbackup(29), pvcroutemgttrunk(30), nomultipointparent(31), pvcroutefail(32), novpivci(33) } ACCESS read-only STATUS mandatory DESCRIPTION "The reason for the PVC establishment failure." ::= { cktEntry 27 } cktFailNode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The node which causes the PVC failure." ::= { cktEntry 28 } cktFailPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port on the fail node which causes the PVC failure." ::= { cktEntry 29 } cktMcastGroupId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Multicast group identifier (1..32). This field is 0 for unicast PVCs." ::= { cktEntry 30 } cktMcastMemberList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A list of operations and the affected unicast DLCIs (lportId, cktId)s in a multicast group. The syntax is as follows: [op:dlci,dlci,...,op:dlci,dlci,...] where op can either be delete (0) or add (1)" ::= { cktEntry 31 } cktMcastParentGroups OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "An 8-byte Octect string indicating the parent groups this DLCI belongs to." ::= { cktEntry 32 } cktInFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound frames since the last reset." ::= { cktEntry 33 } cktInDEFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound DE-marked frames since the last reset." ::= { cktEntry 34 } cktInODEFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound ODE-marked frames since the last reset." ::= { cktEntry 35 } cktInFECNFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound frames indicating forward congestion since the last reset." ::= { cktEntry 36 } cktInBECNFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound frames indicating backward congestion since the last reset." ::= { cktEntry 37 } cktInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of inbound frames discarded by rate enforcement." ::= { cktEntry 38 } cktInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound octets since the last reset." ::= { cktEntry 39 } cktInDEOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound DE-marked octets since the last reset." ::= { cktEntry 40 } cktInODEOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound ODE-marked octets since the last reset." ::= { cktEntry 41 } cktOutFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound frames since the last reset." ::= { cktEntry 42 } cktOutDEFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound DE-marked frames since the last reset." ::= { cktEntry 43 } cktOutODEFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound ODE-marked frames since the last reset." ::= { cktEntry 44 } cktOutFECNFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound FECN-marked frames since the last reset." ::= { cktEntry 45 } cktOutBECNFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound BECN-marked frames since the last reset." ::= { cktEntry 46 } cktOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound octets since the last reset." ::= { cktEntry 47 } cktOutDEOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound DE-marked octets since the last reset." ::= { cktEntry 48 } cktOutODEOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound ODE-marked octets since the last reset." ::= { cktEntry 49 } cktOutLostFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound frames that have been lost since the last reset." ::= { cktEntry 50 } cktOutLostDEFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound DE-marked frames that have been lost since the last reset." ::= { cktEntry 51 } cktOutLostODEFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound ODE-marked frames that have been lost since the last reset." ::= { cktEntry 52 } cktOutLostOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound octets that have been lost since the last reset." ::= { cktEntry 53 } cktOutLostDEOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound DE-marked octets that have been lost since the last reset." ::= { cktEntry 54 } cktOutLostODEOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound ODE-marked octets that have been lost since the last reset." ::= { cktEntry 55 } cktRtMinDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum round-trip delay (micro-seconds)." ::= { cktEntry 56 } cktRtMaxDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum round-trip delay (micro-seconds)." ::= { cktEntry 57 } cktRtAvgDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average round-trip delay (micro-seconds)." ::= { cktEntry 58 } cktDiagTestId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Identification for the diagnostics tests to be run." ::= { cktEntry 59 } cktDiagTestRuns OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of passes of the diagnostics tests to be run. The default value is 1." ::= { cktEntry 60 } cktHelloCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of PVC hello pdu frames received in the VC entry of the called side." ::= { cktEntry 61 } cktHelloAckCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of PVC hello Ack pdu frames received in the VC entry of the calling side." ::= { cktEntry 62 } cktDefinedPath OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "User defined path. in the format of Nx,x,x,Nx,.... If x is not prefixed with 'N', x is an interface ID. If x is prefixed with `N`, x is a node ID." ::= { cktEntry 63 } cktDefinedPathCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "User defined path hop count." ::= { cktEntry 64 } cktDefinedPathEnable OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "If set to 1, it means there is an user defined path for this circuit and it is enabled." ::= { cktEntry 65 } cktDefinedPathAltOption OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "If set to 1, it means that if the user defined path fails, use the ospf-determined path." ::= { cktEntry 66 } cktUsingDefinedPath OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "If set to 1, it indicates the PVC is currently using the defined path." ::= { cktEntry 67 } cktTryAltPath OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "If set to 1, it means the inactive PVC will be activated on the ospf-determined path in the next retry." ::= { cktEntry 68 } cktNotVirgin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "If set to 1, it means this VC entry has been successfuly activated before." ::= { cktEntry 69 } cktInForward OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "If the value is 1, it means the inbound flow is OK." ::= { cktEntry 70 } cktBtusSeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of Bus xmit units per data segment" ::= { cktEntry 71 } cktInSegmentsDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of segments received that were discarded because of frame reassembly errors." ::= { cktEntry 72 } cktAtmVPI OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "VPI value in the ATM cell header: ATM DXI with HSSI IOP VPI (4 lsb bit) range: 0 - 15 ATM UNI DS3/E3 IOP VPI (4 lsb bit) range: 0 - 15 T1 ATM 4 lsb range 0-15 ATM-IWU STM-1/STS-3c VPI (<=12 lsb bit) range: 0-4095" ::= { cktEntry 73 } cktAtmVCI OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "VCI value in the ATM cell header: ATM DXI with HSSI IOP VCI (6 lsb bit) range: 0 - 63 ATM UNI DS3/E3 IOP VCI (8 lsb bit) range: 0 - 255 T1 ATM 4 lsb VCI (6 lsb bit) range 0 - 255 ATM-IWU STM-1/STS-3c VCI (<=12 lsb bit) range: 0-4095" ::= { cktEntry 74 } cktType OBJECT-TYPE SYNTAX INTEGER { pvc (1), svc (2) } ACCESS read-only STATUS mandatory DESCRIPTION "1 if a permanent virtual circuit; 2 if a switched virtual circuit." ::= { cktEntry 75 } cktSvcCallingParty OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The calling party number if this is a switched virtual circuit." ::= { cktEntry 76 } cktSvcCalledParty OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The called party number if this is a switched virtual circuit." ::= { cktEntry 77 } cktSvcDuration OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The duration since the SVC circuit has been running." ::= { cktEntry 78 } cktSvcCause OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SVC cause number. The index will be 0.0 and should be disregarded. The following cause numbers maybe returned by stdx: 1 - unassigned number, callee is not assigned 2 - no route to specified transit network 3 - no route to destination 6 - channel unacceptable 16 - normal clearing 17 - user busy 18 - no user responding 21 - call rejected by whoever is sending this cause 22 - number changed, called party has changed its number 27 - destination out of order (the interface to called user) 28 - called party number is invalid 29 - facility requested can't be provided by network 30 - included in STATUS message to indicate it is responding to a STATUS ENQUIRY 31 - unspecified, used if no other cause is appropriate 34 - no circuit or channel available to handle the call 38 - network is out of order 41 - tempprary failure, i.e., caller may try again 42 - network congestion 43 - access information (user-to-user) discarded 44 - requested circuit unavailable 58 - bearer capability not available 63 - requested service unavailable 65 - requested bearer capability is not implemented 81 - call reference is unknown 95 - invalid message 96 - mandatory information element is missing 97 - message type is unknown 98 - message not compatible with call state 99 - information element is unknown or not implemented 100 - invalid information element contents 101 - message not compatible with call state " ::= { cktEntry 79 } cktXlatFlag OBJECT-TYPE SYNTAX INTEGER { -- no-translation (0), rfc1483 (1) } ACCESS read-write STATUS mandatory DESCRIPTION "0 if RFC1490 or no translation; 1 if RFC1483 translation." ::= { cktEntry 80 } cktDestLaddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The destination logical address of the circuit." ::= { cktEntry 81 } cktSrcLaddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The source logical address of the circuit." ::= { cktEntry 82 } cktLoop OBJECT-TYPE SYNTAX INTEGER { -- disabled(0), local(1), remote(2), both(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this variable controls the loopback status of the given circuit endpoint." ::= { cktEntry 83 } cktRerouteBalance OBJECT-TYPE SYNTAX INTEGER { -- enabled(0), disabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this variable controls the use of rerouting to balance link usage." ::= { cktEntry 84 } cktCallingBackup OBJECT-TYPE SYNTAX INTEGER { -- false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if a caller endpoint is calling a backup PVC." ::= { cktEntry 85 } cktRCir OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The average number of user data (bits) that the network agrees to transfer over the circuit in the opposite direction, measured over the measurement interval T = cktBc/cktCir." ::= { cktEntry 86 } cktAtmQoS OBJECT-TYPE SYNTAX INTEGER { cbr (1), vbr1 (2), vbr2 (3), vbr3 (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The Quality of Service of the ATM Circuit. Valid only for ATM type circuits." ::= { cktEntry 87 } cktAtmInCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM cells received on a VC (VPC or VCC)." ::= { cktEntry 88 } cktAtmOutCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM cells transmitted on a VC (VPC or VCC).." ::= { cktEntry 89 } cktAtmInDiscardedClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM CLP0 cells received and discarded on a VC (VPC or VCC).." ::= { cktEntry 90 } cktAtmInDiscardedClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM CLP1 cells received and discarded on a VC (VPC or VCC)." ::= { cktEntry 91 } cktAtmVcType OBJECT-TYPE SYNTAX INTEGER { vpc (1), vcc (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of ATM connection (VPC or VCC)." ::= { cktEntry 92 } cktAtmPCR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Peak Cell Rate measured in cells/second at which cells are transmitted for this circuit." ::= { cktEntry 93 } cktAtmSCR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Sustainable Cell Rate is the average transmission rate in cells per second for this circuit. It must be less than or or equal to the Peak Cell Rate." ::= { cktEntry 94 } cktAtmMBS OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Maximum Burst size determines the maximum number of cells that can be transmitted at the peak cell rate." ::= { cktEntry 95 } cktAtmInPassedClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM CLP 0 cells received and passed UPC on a VC (VPC or VCC)." ::= { cktEntry 96 } cktAtmInPassedClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM CLP 1 cells received and passed UPC on a VC (VPC or VCC)." ::= { cktEntry 97 } cktAtmInTaggedCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM cells received and tagged on a VC (VPC or VCC)." ::= { cktEntry 98 } cktAtmOutClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM CLP 0 cells transmitted on a VC (VPC or VCC).." ::= { cktEntry 99 } cktAtmOutClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM CLP 1 cells transmitted on a VC (VPC or VCC).." ::= { cktEntry 100 } cktAtmRQoS OBJECT-TYPE SYNTAX INTEGER { cbr (1), vbr1 (2), vbr2 (3), vbr3 (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The Quality of Service of the ATM connection in the opposite direction." ::= { cktEntry 101 } cktAtmTfdType OBJECT-TYPE SYNTAX INTEGER { pcr-0-01 (1), pcr-0-01-tag (2), pcr-01-scr-0-mbs-0 (3), pcr-01-scr-0-mbs-0-tag (4), pcr-01 (5), pcr-01-scr-01-mbs-01(6), pcr-01-bestEffort(7) } ACCESS read-write STATUS mandatory DESCRIPTION "The combination of traffic parameters." ::= { cktEntry 102 } cktAtmRTfdType OBJECT-TYPE SYNTAX INTEGER { pcr-0-01 (1), pcr-0-01-tag (2), pcr-01-scr-0-mbs-0 (3), pcr-01-scr-0-mbs-0-tag (4), pcr-01 (5), pcr-01-scr-01-mbs-01 (6), pcr-01-bestEffort(7) } ACCESS read-write STATUS mandatory DESCRIPTION "The combination of traffic parameters in opposite direction." ::= { cktEntry 103 } cktAtmTfdParam1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The traffic descriptor parameter 1." ::= { cktEntry 104 } cktAtmTfdParam2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The traffic descriptor parameter 2." ::= { cktEntry 105 } cktAtmTfdParam3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The traffic descriptor parameter 3." ::= { cktEntry 106 } cktAtmRTfdParam1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The traffic descriptor parameter 1 for opposite direction." ::= { cktEntry 107 } cktAtmRTfdParam2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The traffic descriptor parameter 3 for opposite direction." ::= { cktEntry 108 } cktAtmRTfdParam3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The traffic descriptor parameter 3 for opposite direction." ::= { cktEntry 109 } cktAtmFrameIWF OBJECT-TYPE SYNTAX INTEGER { default(1), iwf(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Frame Relay/ATM Interworking Function indicator." ::= { cktEntry 110 } cktAtmUserPlane OBJECT-TYPE SYNTAX INTEGER { point-to-point(1), point-to-multipoint(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Bitmap defining user plane capabilities." ::= { cktEntry 111 } cktRBc OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum amount of data (bits) that the network agrees to transfer over the circuit in the opposite direction under normal conditions, during the measurement interval." ::= { cktEntry 112 } cktRBe OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum amount of uncommitted data (bits) that the network will attempt to transfer over the circuit in the opposite direction during the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed." ::= { cktEntry 113 } cktOamLoopbackDirection OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Which direction to send the loopback cell. If 'local', send out this circuit entry's port. If 'remote', send out the remote circuit entry's port." ::= { cktEntry 114} cktOamLoopbackType OBJECT-TYPE SYNTAX INTEGER { segment(1), end-to-end(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of oam loopback to send - either segment or end to end." ::= { cktEntry 115} cktOamLoopbackHops OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of hops the loopback cell should traverse inside the Cascade network before being echoed back by the far Cascade device." ::= { cktEntry 116} cktOamLoopbackCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of oam loopback cells left to send this session. Setting this from zero to non-zero starts the loopback session." ::= { cktEntry 117} cktOamLoopbackReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of oam responses received for this loopback session." ::= { cktEntry 118} cktOamLoopbackTimeouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times a loopback response was not received within the timeout period during this loopback session." ::= { cktEntry 119} cktOamLoopbackReceivedHigh OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Highest response time (in milliseconds) of an oam loopback response this loopback session." ::= { cktEntry 120} cktOamLoopbackReceivedLow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lowest response time (in milliseconds) of an oam loopback response this loopback session." ::= { cktEntry 121} cktOamLoopbackReceivedAvg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Average response time (in milliseconds) of an oam loopback response this loopback session." ::= { cktEntry 122} cktOamAlarmDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If disabled, then don't generate oam alarms if this circuit is down." ::= { cktEntry 123} cktShaperId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The shaper to be used for this virtual connection interworking with frame relay: 1-port ATM-IWU STM-1/STS-3c card -------------------------------- Values: 1..16" ::= { cktEntry 124 } cktOspfCtd OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "The allowed cell delay: 4-port CBR E1/DS1 card ---------------------- The maximum allowed cell delay in msec" ::= { cktEntry 125 } cktOspfCdv OBJECT-TYPE SYNTAX INTEGER (100..1000) ACCESS read-write STATUS mandatory DESCRIPTION "The allowed cell delay variation: 4-port CBR E1/DS1 card ---------------------- The maximum allowed cell delay variation in msec" ::= { cktEntry 126 } cktOutPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The outgoing port number for the adjacent VC entry in this switch." ::= { cktEntry 127 } cktOutVc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The adjacent VC entry corresponding to this circuit accross the bus." ::= { cktEntry 128 } cktRVc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The adjacent VC entry corresponding to this circuit accross the trunk." ::= { cktEntry 129 } cktEntryType OBJECT-TYPE SYNTAX INTEGER { fr-user(1), as-trunk(2), on-trunk(3), lmi(4), multicast(5), mgmt(6), smds(7), split-multicast(8), control(9), atm-user(10), atm-leaf(11) } ACCESS read-only STATUS mandatory DESCRIPTION "The internal type of circuit entry allocated by the circuit manager." ::= { cktEntry 130 } cktDiagStr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Internal diagnostic information." ::= { cktEntry 131 } cktSvcAalType OBJECT-TYPE SYNTAX INTEGER { aal1 (1), unspecified (2), aal3-4 (3), user-defined (4), aal5 (5) } ACCESS read-only STATUS mandatory DESCRIPTION "The AAL type for this SVC." ::= { cktEntry 132 } cktSvcBBearerClass OBJECT-TYPE SYNTAX INTEGER { unspecified (1), class-A (2), class-C (3), class-X (4), class-VP (5) } ACCESS read-only STATUS mandatory DESCRIPTION "The Broadband bearer capability class for this SVC." ::= { cktEntry 133 } cktSvcBBearerClippingSusc OBJECT-TYPE SYNTAX INTEGER { unspecified (1), not-susceptible (2), susceptible (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The Broadband bearer capability clipping susceptibility for this SVC." ::= { cktEntry 134 } cktSvcBBearerTmgReq OBJECT-TYPE SYNTAX INTEGER { not-indicated (1), end-to-end (2), not-end-to-end (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The Broadband bearer capability timing requirements for this SVC." ::= { cktEntry 135 } cktSvcBBearerTfcType OBJECT-TYPE SYNTAX INTEGER { not-indicated (1), cbr (2), vbr (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The Broadband bearer capability traffic type for this SVC." ::= { cktEntry 136 } cktAtmUPCEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable ATM UPC Function." ::= { cktEntry 137 } cktRPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The priority level (0 through 3) for this circuit in the opposite direction. When port service type is defined as 'mono-class', this priority means the forward priority of the circuit. When port service type is defined as 'multi-class', this priority means the discard priority of the circuit." ::= { cktEntry 138 } cktRtPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The routing priority level of the circuit which is a 8 bit number where the 3-bit bumping priority is contained in bits 0-2 and the 4-bit bandwidth priority is contained in bits 3-6. For ATM multipoint ckts, bw and bumping priorities should be zero." ::= { cktEntry 139 } cktDeltaBc OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of bits that the network agree to transfer over the circuit as committed bits during the measurement interval under the CONDITION that the circuit still has POSITIVE committed bit (Bc) credits before receiving a frame but will have NEGATIVE Bc credits after accepting the frame. The range of this variable is 0 to 65,528 bits. By default, if not configured when creating the entry, it is set to 65,528 bits." ::= { cktEntry 140 } cktDeltaBe OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of bits that the network agree to transfer over the circuit as allowed excess bits during the measurement interval under the CONDITION that the circuit still has POSITIVE excess bit (Be) credits before receiving a frame but will have NEGATIVE Be credits after accepting the frame. The range of this variable is 0 to 65,528 bits. By default, if not configured when creating the entry, it is set to 65,528 bits." ::= { cktEntry 141 } cktDeltaRBc OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of bits that the network agree to transfer over the circuit as committed bits in the opposite direction during the measurement interval under the CONDITION that the circuit still has POSITIVE committed bit (Bc) credits before receiving a frame but will have NEGATIVE Bc credits after accepting the frame. The range of this variable is 0 to 65,528 bits. By default, if not configured when creating the entry, it is set to 65,528 bits." ::= { cktEntry 142 } cktDeltaRBe OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of bits that the network agree to transfer over the circuit as allowed excess bits in the opposite direction during the measurement interval under the CONDITION that the circuit still has POSITIVE excess bit (Be) credits before receiving a frame but will have NEGATIVE Be credits after accepting the frame. The range of this variable is 0 to 65,528 bits. By default, if not configured when creating the entry, it is set to 65,528 bits." ::= { cktEntry 143 } cktRedFrPcnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The percentage of RED frame bits that are allowed to enter the network, during the measurement interval, under non-congestion condition. Its value range is 0 - 100 and default value is 100. Its calculation is as follows: cktRedFrPcn = (allowed RED frame bits)/(Bc+Be+allowed RED frame bits)" ::= { cktEntry 144 } cktRedFrRPcnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The percentage of RED frame bits that are allowed to enter the network in the opposite direction, during the measurement interval, under non-congestion condition. Its value range is 0 - 100 and default value is 100. Its calculation is as follows: cktRedFrRPcn = (allowed RED frame bits)/(rBc+rBe+allowed RED frame bits)" ::= { cktEntry 145 } cktRateEnforceSchm OBJECT-TYPE SYNTAX INTEGER { -- slide (0), jump (1), simple (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Variable used to indicate the rate enforcement scheme employed. 0: Slide window rate enforcement scheme 1: Jump window rate enforcement scheme 2: Simple rate enforcement scheme Default value is 2." ::= { cktEntry 146 } cktRateEnforceRSchm OBJECT-TYPE SYNTAX INTEGER { -- slide (0), jump (1), simple (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Variable used to indicate the rate enforcement scheme employed in the opposite direction. 0: Slide window rate enforcement scheme 1: Jump window rate enforcement scheme 2: Simple rate enforcement scheme Default value is 2." ::= { cktEntry 147 } cktROde OBJECT-TYPE SYNTAX INTEGER { -- off (0), on (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable states whether graceful discard is enabled for the ckt in the opposite direction." ::= { cktEntry 148 } cktPrivateNet OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "If non-zero, indicates the private network that the circuit belongs to. If 0, the circuit has access to the entire public portion of the network." ::= { cktEntry 149 } cktPrivateNetOverflow OBJECT-TYPE SYNTAX INTEGER { -- restrict (0), use-public (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates how private network circuits are handled, when the resources of the network have become exhausted. If set to use-public, the resources of the public network can be used during overflow conditions." ::= { cktEntry 150 } cktCustomerID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Customer that owns this circuit. For Virtual Private Networking Support." ::= { cktEntry 151 } cktAtmCDVT OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Cell Delay Variation Tolerance for the VC" ::= { cktEntry 152 } cktNdcEnable OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable Network Data Collection for a PVC on an IOM. The number of NDC-monitored PVCs is limited as follows: 30 per DS3 interface, 90 per OC3 interface, and 360 per OC12 interface." ::= { cktEntry 153 } cktInterworkingFrToAtmCLP OBJECT-TYPE SYNTAX INTEGER { -- clp0 (0), clp1 (1), fr-de (2) } ACCESS read-write STATUS mandatory DESCRIPTION "CLP mapping for Frame Relay To ATM Service Interworking." ::= { cktEntry 154 } cktInterworkingFrToAtmDe OBJECT-TYPE SYNTAX INTEGER { -- de0 (0), de1 (1), atm-clp (2) } ACCESS read-write STATUS mandatory DESCRIPTION "DE bit mapping for ATM To Frame Relay Service Interworking." ::= { cktEntry 155 } cktNrtsCLP1 OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether to use the discard threshold as the CLP1 Discard threshold upon reception of a cell by the NRTS processor in the forward direction." ::= { cktEntry 156 } cktNrtsDiscardClp0 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of the CLP0 cells received and discarded by the NRTS processor." ::= { cktEntry 157 } cktNrtsDiscardClp1 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of the CLP1 cells received and discarded by the NRTS processor." ::= { cktEntry 158 } cktMPEnableAMF OBJECT-TYPE SYNTAX INTEGER { disableAMF (1), enableAMF (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether the Multilink PPP PVC Attributes Modification Feature is enabled." ::= { cktEntry 159 } cktMPEligible OBJECT-TYPE SYNTAX INTEGER { isMPEligible (1), isNotMPEligible (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether this circuit is eligible to be a member of a Multilink PPP bundle." ::= { cktEntry 160 } cktMPForcedCaller OBJECT-TYPE SYNTAX INTEGER { isMPForcedCaller (1), isNotMPForcedCaller (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether this end of the circuit has been forced to be caller to support Multilink PPP PVC Attributes Modification Feature." ::= { cktEntry 161 } cktMPForcedCallee OBJECT-TYPE SYNTAX INTEGER { isMPForcedCallee (1), isNotMPForcedCallee (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether this end of the circuit has been forced to be callee to support Multilink PPP PVC Attributes Modification Feature." ::= { cktEntry 162 } cktFrameSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The average frame size (measured in number of bytes) of the traffic on the circuit. If not configured, it is set to 280 (bytes) by default." ::= { cktEntry 163 } cktRFrameSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The average frame size (measured in number of bytes) of the traffic on the circuit on the reverse direction. If not configured, it is set to 280 (bytes) by default." ::= { cktEntry 164 } cktRNrtsCLP1 OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether to use the discard threshold as the CLP1 Discard threshold upon reception of a cell by the NRTS processor in the reverse direction." ::= { cktEntry 165 } cktBBearerAtmTransferCapability OBJECT-TYPE SYNTAX INTEGER { none (1), cbr (2), cbr-with-clr_01 (3), vbr-rt (4), vbr-rt-with-clr_01 (5), vbr-nrt (6), vbr-nrt-with-clr_01 (7), abr (8) } ACCESS read-only STATUS mandatory DESCRIPTION "The broadband bearer ATM transfer capability of this SVC. This object is not pertinent to IISP 3.x, UNI 3.x or Q.2931 signaling." ::= { cktEntry 166 } cktAtmFrameDiscard OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The ATM frame discard state for this circuit." DEFVAL { disabled } ::= { cktEntry 167 } cktRAtmFrameDiscard OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The reverse ATM frame discard state for this circuit." DEFVAL { disabled } ::= { cktEntry 168 } cktAbrFRMRTT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ABR fixed RM round trip time for this SVC." ::= { cktEntry 169 } cktAbrICR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ABR initial cell rate for this SVC." ::= { cktEntry 170 } cktRAbrICR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The reverse ABR initial cell rate for this SVC." ::= { cktEntry 171 } cktAbrRIF OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ABR rate increase factor for this SVC." ::= { cktEntry 172 } cktRAbrRIF OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The reverse ABR rate increase factor for this SVC." ::= { cktEntry 173 } cktAbrRDF OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ABR rate decrease factor for this SVC." ::= { cktEntry 174 } cktRAbrRDF OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The reverse ABR rate decrease factor for this SVC." ::= { cktEntry 175 } cktAbrTBE OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ABR transient buffer exposure for this SVC." ::= { cktEntry 176 } cktRAbrTBE OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The reverse ABR transient buffer exposure for this SVC." ::= { cktEntry 177 } cktAbrNRM OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ABR NRM for this SVC." ::= { cktEntry 178 } cktRAbrNRM OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The reverse ABR NRM for this SVC." ::= { cktEntry 179 } cktAbrTRM OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ABR TRM for this SVC." ::= { cktEntry 180 } cktRAbrTRM OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The reverse ABR TRM for this SVC." ::= { cktEntry 181 } cktAbrCDF OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ABR CDF for this SVC." ::= { cktEntry 182 } cktRAbrCDF OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The reverse ABR CDF for this SVC." ::= { cktEntry 183 } cktAbrADTF OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ABR ADTF for this SVC." ::= { cktEntry 184 } cktRAbrADTF OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The reverse ABR ADTF for this SVC." ::= { cktEntry 185 } cktAccumCTD OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The accumulated cell(frame) transfer delay for this circuit, in microseconds. The distinguished value 0x00FFFFFF means not valid." ::= { cktEntry 186 } cktAccumCDV OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The accumulated cell delay variation for this circuit, in microseconds. The distinguished value 0x00FFFFFF means not valid." ::= { cktEntry 187 } cktAccumRCDV OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The accumulated reverse cell delay variation for this circuit, in microseconds. The distinguished value 0x00FFFFFF means not valid." ::= { cktEntry 188 } cktCLR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The cell loss ratio requirement, expressed as a negative exponent of 10. The default value 255 represents any cell loss ratio acceptable." ::= { cktEntry 189 } cktRCLR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The reverse cell loss ratio requirement, expressed as a negative exponent of 10. The default value 255 represents any cell loss ratio acceptable." ::= { cktEntry 190 } cktAtmLijId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Leaf Initiated Join ID of the PMP SVC rooted at this interface." ::= { cktEntry 191 } cktAtmLijType OBJECT-TYPE SYNTAX INTEGER { not-lij (1), -- not a PMP SVC root-lij (2), -- network LIJ disallowed network-lij (3) -- network LIJ allowed } ACCESS read-only STATUS mandatory DESCRIPTION "The Leaf Initiated Join type of the PMP SVC rooted at this interface." ::= { cktEntry 192 } cktRtLastDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The last round-trip delay (micro-seconds)." ::= { cktEntry 193 } cktRtAccuMinDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The prev min round-trip delay (micro-seconds)." ::= { cktEntry 194 } cktRtAccuMaxDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The prev max round-trip delay (micro-seconds)." ::= { cktEntry 195 } cktRtAccuAvgDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The prev avg round-trip delay (micro-seconds)." ::= { cktEntry 196 } cktQosIntPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of periods for calculating qos params." ::= { cktEntry 197 } cktAtmOutOAMClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of OAM CLP0 cells transmitted on this circuit. For BIO1 card (on Garnet Platform), this count is not reported separately - see cktEntry 99. " ::= { cktEntry 198 } cktAtmOutOAMClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of OAM CLP1 cells transmitted on this circuit. For BIO1 card (on Garnet Platform), this count is not reported separately - see cktEntry 100." ::= { cktEntry 199 } cktReqCTD OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The requested cell/frame delay variation for this circuit, in microseconds. The range for PVC is 1 - 0x00FFFFFF. The default is 0x00FFFFFF, which means not valid." ::= { cktEntry 200 } cktInOctetsPeak OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 5-minute peak value of the number of inbound octets (bytes) for the circuit - from Bulk Statistics." ::= { cktEntry 201 } cktOutOctetsPeak OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 5-minute peak value of the number of outbound octets (bytes) for the circuit - from Bulk Statistics." ::= { cktEntry 202 } cktInDEOctetsPeak OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 5-minute peak value of the number of inbound DE-marked octets (bytes) for the circuit - from Bulk Statistics." ::= { cktEntry 203 } cktOutDEOctetsPeak OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 5-minute peak value of the number of outbound DE-marked octets (bytes) for the circuit - from Bulk Statistics." ::= { cktEntry 204 } cktInODEOctetsPeak OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 5-minute peak value of the number of inbound ODE-marked octets (bytes) for the circuit - from Bulk Statistics." ::= { cktEntry 205 } cktOutODEOctetsPeak OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 5-minute peak value of the number of outbound ODE-marked octets (bytes) for the circuit - from Bulk Statistics." ::= { cktEntry 206 } cktAdminCostThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum allowable admin cost for the circuit. If no paths are available with cost less than or equal to this value, the circuit is not established. DEFVAL is 0 which means invalid, valid values range from 1 to 0xFFFFFFFF." ::= { cktEntry 207 } cktAtmSvcServiceCategory OBJECT-TYPE SYNTAX INTEGER { cbr (1), vbr1 (2), vbr2 (3), ubr_abr (4), unspecified (5) } ACCESS read-only STATUS mandatory DESCRIPTION "The derived service category in the forward direction for this ATM SVC." ::= { cktEntry 208 } cktAtmSvcRServiceCategory OBJECT-TYPE SYNTAX INTEGER { cbr (1), vbr1 (2), vbr2 (3), ubr_abr (4), unspecified (5) } ACCESS read-only STATUS mandatory DESCRIPTION "The derived service category in the reverse direction for this ATM SVC." ::= { cktEntry 209 } cktInterworkingFrToAtmEFCI OBJECT-TYPE SYNTAX INTEGER { fr-fecn (1), efci0 (2) } ACCESS read-write STATUS mandatory DESCRIPTION "EFCI mapping for Frame Relay To ATM Service Interworking." ::= { cktEntry 210 } cktDiagSARMon OBJECT-TYPE SYNTAX INTEGER { flowOnInbound (1), flowOffInbound (2), flowOnOutbound (3), flowOffOutbound (4), flowOnInboundOutbound (5), flowOffInboundOutbound (6) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to start or stop flow on the inbound/outbound ATMizer without informing the PPC." ::= { cktEntry 211 } cktAdminCostReal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Actual value of total administration cost of a circuit. Ranges from 0 to 0xFFFFFFFF." ::= { cktEntry 212 } cktAtmInClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM CLP 0 cells received on a VC (VPC or VCC)." ::= { cktEntry 213 } cktAtmInClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM CLP 1 cells received on a VC (VPC or VCC)." ::= { cktEntry 214 } cktATMAAL5CRC32Error OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received AAL5 packets with CRC32 errors." ::= { cktEntry 215 } cktATMAAL5CPIError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received AAL5 packets with CPI errors The only valid value currently defined for the CPI field is all zeros" ::= { cktEntry 216 } cktATMAAL5LengthError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received AAL5 packets which satisfied one of the following error conditions: 1. number of received cells * 48 bytes - length value in trailer > 55 bytes 2. number of received cells * 48 bytes - length value in trailer < 8 bytes" ::= { cktEntry 217 } cktATMAAL5ReassemblyTimerError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of expired reassembly timers" ::= { cktEntry 218 } cktATMAAL5MaxNrSegError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received AAL5 packets which exceeds the maximum allowed length" ::= { cktEntry 219 } cktIWF1490to1483Error OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Frames received that failed the rfc1490 to rfc 1483 header translation. This error counter indicates that frames being recevied from the frame relay side of the connection have an incorrectly formatted 1490 header and cannot be translated. See cktIWF1490to1483LastBadHeader for the last received 1490 header" ::= { cktEntry 220 } cktIWF1490to1483LastBadHeader OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Ascii string of the first 8 bytes of the header from the last frame discarded because the 1490 to 1483 header translation failed. The string displays the hexidecimal values for the data bytes" ::= { cktEntry 221 } cktIWF1483to1490Error OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Frames received that failed the rfc1483 to rfc 1490 header translation. This error counter indicates that frames being recevied from the atm side of the connection have an incorrectly formatted 1483 header and cannot be translated. See cktIWF1483to1490LastBadHeader for the last received 1490 header" ::= { cktEntry 222 } cktIWF1483to1490LastBadHeader OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Ascii string of the first 10 bytes of the header from the last frame discarded because the 1483 to 1490 header translation failed. The string displays the hexidecimal values for the data bytes" ::= { cktEntry 223 } -- -- The cktLeafTable -- cktLeafTable OBJECT-TYPE SYNTAX SEQUENCE OF CktLeafEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing information about leaves of multipoint circuits." ::= { ckt 2 } cktLeafEntry OBJECT-TYPE SYNTAX CktLeafEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The objects relevant to a single leaf in a multipoint circuit." INDEX { cktLeafSrcIfIndex, cktLeafSrcDlci, cktLeafEndpointIndex } ::= { cktLeafTable 1 } CktLeafEntry ::= SEQUENCE { cktLeafSrcIfIndex Index, cktLeafSrcDlci INTEGER, cktLeafEndpointIndex INTEGER, cktLeafCreationTime TimeTicks, cktLeafEgressIfIndex Index, cktLeafEgressDlci INTEGER, cktLeafDestNodeId INTEGER, cktLeafDestIfIndex Index, cktLeafDestDlci INTEGER, cktLeafSvcCallingParty OCTET STRING, cktLeafSvcCalledParty OCTET STRING, cktLeafAdminStatus INTEGER, cktLeafVcState INTEGER, cktLeafOperStatus INTEGER, cktLeafDceState INTEGER, cktLeafDteStatus INTEGER, cktLeafDteState INTEGER, cktLeafVcPtr OCTET STRING, cktLeafHopCnt INTEGER, cktLeafPath OCTET STRING, cktLeafFailReason INTEGER, cktLeafFailNode INTEGER, cktLeafFailPort INTEGER, cktLeafHelloCounter INTEGER, cktLeafHelloAckCounter INTEGER, cktLeafAtmVPI INTEGER, cktLeafAtmVCI INTEGER, cktLeafType INTEGER, cktLeafAtmInCells Counter, cktLeafAtmOutCells Counter, cktLeafAtmInDiscardedClp0Cells Counter, cktLeafAtmInDiscardedClp1Cells Counter, cktLeafAtmInPassedClp0Cells Counter, cktLeafAtmInPassedClp1Cells Counter, cktLeafAtmInTaggedCells Counter, cktLeafAtmOutClp0Cells Counter, cktLeafAtmOutClp1Cells Counter } cktLeafSrcIfIndex OBJECT-TYPE SYNTAX Index ACCESS read-only STATUS mandatory DESCRIPTION "The interface ID at this node's ingress port for the corresponding multipoint circuit." ::= { cktLeafEntry 1 } cktLeafSrcDlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The DLCI, if a frame relay circuit, or concatenated VPI and VCI, if an ATM circuit, at this node's ingress port for the corresponding multipoint circuit." ::= { cktLeafEntry 2 } cktLeafEndpointIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An identifier unique to this leaf for the corresponding multipoint circuit." ::= { cktLeafEntry 3 } cktLeafCreationTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when this leaf was created for the corresponding multipoint circuit." ::= { cktLeafEntry 4 } cktLeafEgressIfIndex OBJECT-TYPE SYNTAX Index ACCESS read-only STATUS mandatory DESCRIPTION "The interface ID at this node's egress port for this leaf's segment of the corresponding multipoint circuit." ::= { cktLeafEntry 5 } cktLeafEgressDlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The DLCI, if a frame relay circuit, or concatenated VPI and VCI, if an ATM circuit, at this node's egress port for this leaf's segment of the corresponding multipoint circuit." ::= { cktLeafEntry 6 } cktLeafDestNodeId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The node ID of the node where this leaf terminates." ::= { cktLeafEntry 7 } cktLeafDestIfIndex OBJECT-TYPE SYNTAX Index ACCESS read-write STATUS mandatory DESCRIPTION "The interface ID at the egress port of the destination node for this leaf, if this is a PVC." ::= { cktLeafEntry 8 } cktLeafDestDlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The DLCI, if a frame relay circuit, or concatenated VPI and VCI, if an ATM circuit, at this node's destination port for the corresponding multipoint circuit." ::= { cktLeafEntry 9 } cktLeafSvcCallingParty OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The calling party number for this leaf, if this is an SVC." ::= { cktLeafEntry 10 } cktLeafSvcCalledParty OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The called party number for this leaf, if this is an SVC." ::= { cktLeafEntry 11 } cktLeafAdminStatus OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), down (1), up (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state for the leaf entry." ::= { cktLeafEntry 12 } cktLeafVcState OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), inactive (1), retry (2), calling (3), wcbdeact(4), wcbdelete(5), active (6), svcall (7), svclr (8), backedup (9), wcbbkdp (10), wcbreact (11), slowretry (12) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the leaf PVC segment in the Cascade network." ::= { cktLeafEntry 13 } cktLeafOperStatus OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), inactive (1), active (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational status of the entire leaf PVC." ::= { cktLeafEntry 14 } cktLeafDceState OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), inactive (1), active (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The DCE state of the circuit." ::= { cktLeafEntry 15 } cktLeafDteStatus OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), inactive (1), active (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The DTE status of the circuit." ::= { cktLeafEntry 16 } cktLeafDteState OBJECT-TYPE SYNTAX INTEGER { -- invalid (0), inactive (1), active (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The DTE state of the circuit." ::= { cktLeafEntry 17 } cktLeafVcPtr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "An 8-byte Octect string indicating the vc pointer." ::= { cktLeafEntry 18 } cktLeafHopCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The count of hops along the circuit path. (Max is 16)" ::= { cktLeafEntry 19 } cktLeafPath OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The circuit path consisting a sequence of outbound interface indexes at nodes along the established circuit. The format is interface:interface:interface......" ::= { cktLeafEntry 20 } cktLeafFailReason OBJECT-TYPE SYNTAX INTEGER { -- none (0), admindown (1), novcbuff (2), nobw (3), noroute (4), timeout (5), nopdubuff (6), nodest (7), trkrnr (8), trkdown (9), balancereroute (10), dead(11), defpathreroute(12), nidown(13), otherpvcsegdown(14), otherpvcsegrnr(15), usingaltpathwarning(16), iopdown(17), numsgbuffer(18), noport(19), misconfig(20), svcsetupfail(21), srcbackedup(22), srcunknown(23), dstunknown(24), bkpdlcicollision(25), oldrevinpath(26), smdsmgmttrunk(27), nevercalled(28), bothendptbackup(29), pvcroutemgttrunk(30), nomultipointparent(31), pvcroutefail(32), novpivci(33) } ACCESS read-only STATUS mandatory DESCRIPTION "The reason for the PVC establishment failure." ::= { cktLeafEntry 21 } cktLeafFailNode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The node which causes the PVC failure." ::= { cktLeafEntry 22 } cktLeafFailPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port on the fail node which causes the PVC failure." ::= { cktLeafEntry 23 } cktLeafHelloCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of PVC hello pdu frames received in the VC entry of the called side." ::= { cktLeafEntry 24 } cktLeafHelloAckCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of PVC hello Ack pdu frames received in the VC entry of the calling side." ::= { cktLeafEntry 25 } cktLeafAtmVPI OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "VPI value in the ATM cell header" ::= { cktLeafEntry 26 } cktLeafAtmVCI OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "VCI value in the ATM cell header" ::= { cktLeafEntry 27 } cktLeafType OBJECT-TYPE SYNTAX INTEGER { pvc (1), svc (2) } ACCESS read-only STATUS mandatory DESCRIPTION "1 if a permanent virtual circuit; 2 if a switched virtual circuit." ::= { cktLeafEntry 28 } cktLeafAtmInCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM cells received on a VCC." ::= { cktLeafEntry 29 } cktLeafAtmOutCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM cells transmitted on a VCC." ::= { cktLeafEntry 30 } cktLeafAtmInDiscardedClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM CLP0 cells received and discarded on a VCC." ::= { cktLeafEntry 31 } cktLeafAtmInDiscardedClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM CLP1 cells received and discarded on a VCC." ::= { cktLeafEntry 32 } cktLeafAtmInPassedClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM CLP 0 cells received and passed UPC on a VCC." ::= { cktLeafEntry 33 } cktLeafAtmInPassedClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM CLP 1 cells received and passed UPC on a VCC." ::= { cktLeafEntry 34 } cktLeafAtmInTaggedCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM cells received and tagged on a VCC." ::= { cktLeafEntry 35 } cktLeafAtmOutClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM CLP 0 cells transmitted on a VCC." ::= { cktLeafEntry 36 } cktLeafAtmOutClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Number of ATM CLP 1 cells transmitted on a VCC." ::= { cktLeafEntry 37 } -- A Circuit Table to manage SMDS routes -- cktSmdsRtTable OBJECT-TYPE SYNTAX SEQUENCE OF CktSmdsRtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing information about destination, VC, hops and routes." ::= { ckt 3 } cktSmdsRtEntry OBJECT-TYPE SYNTAX CktSmdsRtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The information regarding routes from a node to all its neighbors." INDEX { cktSmdsRemoteNode } ::= { cktSmdsRtTable 1 } CktSmdsRtEntry ::= SEQUENCE { cktSmdsRemoteNode INTEGER, cktSmdsHopCnt INTEGER, cktSmdsRoute OCTET STRING, cktSmdsLocalPort INTEGER, cktSmdsRemotePort INTEGER, cktSmdsVcState INTEGER } cktSmdsRemoteNode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The nodeId of the node to which a rought is sought." ::= { cktSmdsRtEntry 1 } cktSmdsHopCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of hops to reach the desired destination node." ::= { cktSmdsRtEntry 2 } cktSmdsRoute OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The out-going Interface Id of each of the nodes in the path." ::= { cktSmdsRtEntry 3 } cktSmdsLocalPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The out-going local portId." ::= { cktSmdsRtEntry 4 } cktSmdsRemotePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The remote portId of the destination nodeId." ::= { cktSmdsRtEntry 5 } cktSmdsVcState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The state of the circuit." ::= { cktSmdsRtEntry 6 } -- the DS1 Configuration Table dsx1ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS1 Configuration table." ::= { ds1 1 } dsx1ConfigEntry OBJECT-TYPE SYNTAX Dsx1ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS1 Configuration table." INDEX { dsx1SlotId, dsx1PortId } ::= { dsx1ConfigTable 1 } Dsx1ConfigEntry ::= SEQUENCE { dsx1SlotId INTEGER, dsx1PortId INTEGER, dsx1TimeElapsed INTEGER, dsx1ValidIntervals INTEGER, dsx1LineType INTEGER, dsx1LineCoding INTEGER, dsx1SendCode INTEGER, dsx1CircuitIdentifier DisplayString, dsx1LoopbackConfig INTEGER, dsx1LineStatus INTEGER, dsx1SignalMode INTEGER, dsx1TransmitClockSource INTEGER, dsx1Fdl INTEGER, dsx1FdlVersion INTEGER } dsx1SlotId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number of the corresponding DS1." ::= { dsx1ConfigEntry 1 } dsx1PortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the corresponding DS1 on the board." ::= { dsx1ConfigEntry 2 } dsx1TimeElapsed OBJECT-TYPE SYNTAX INTEGER (0..899) ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds that have elapsed since the beginning of the current error-measurement period." ::= { dsx1ConfigEntry 3 } dsx1ValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) ACCESS read-only STATUS mandatory DESCRIPTION "The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals the since interface has been online." ::= { dsx1ConfigEntry 4 } dsx1LineType OBJECT-TYPE SYNTAX INTEGER { other(1), dsx1ESF(2), dsx1D4(3), dsx1E1(4), dsx1E1-CRC(5), dsx1E1-MF(6), dsx1E1-CRC-MF(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: dsx1ESF Extended SuperFrame DS1 dsx1D4 AT&T D4 format DS1 dsx1E1 CCITT Recommendation G.704 (Table 4a) dsx1E1-CRC CCITT Recommendation G.704 (Table 4b) dsxE1-MF G.704 (Table 4a) with TS16 multiframing enabled dsx1E1-CRC-MF G.704 (Table 4b) with TS16 multiframing enabled" ::= { dsx1ConfigEntry 5 } dsx1LineCoding OBJECT-TYPE SYNTAX INTEGER { dsx1JBZS (1), dsx1B8ZS (2), dsx1HDB3 (3), dsx1ZBTSI (4), dsx1AMI (5), other(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. dsx1JBZS refers the Jammed Bit Zero Suppres- sion, in which the AT&T specification of at least one pulse every 8 bit periods is literal- ly implemented by forcing a pulse in bit 8 of each channel. Thus, only seven bits per chan- nel, or 1.344 Mbps, is available for data. dsx1B8ZS refers to the use of a specified pat- tern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. ANSI Clear Channels may use dsx1ZBTSI, or Zero Byte Time Slot Interchange. E1 links, with or without CRC, use dsx1HDB3 or dsx1AMI. dsx1AMI refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density re- quirements, such as inverting HDLC data." ::= { dsx1ConfigEntry 6 } dsx1SendCode OBJECT-TYPE SYNTAX INTEGER { dsx1SendNoCode(1), dsx1SendLineCode(2), dsx1SendPayloadCode(3), dsx1SendResetCode(4), dsx1SendQRS(5), dsx1Send511Pattern(6), dsx1Send3in24Pattern(7), dsx1SendOtherTestPattern(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean: dsx1SendNoCode sending looped or normal data dsx1SendLineCode sending a request for a line loopback dsx1SendPayloadCode sending a request for a payload loopback dsx1SendResetCode sending a loopback termination request dsx1SendQRS sending a Quasi-Random Signal (QRS) test pattern dsx1Send511Pattern sending a 511 bit fixed test pattern dsx1Send3in24Pattern sending a fixed test pattern of 3 bits set in 24 dsx1SendOtherTestPattern sending a test pattern other than those described by this object" ::= { dsx1ConfigEntry 7 } dsx1CircuitIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting." ::= { dsx1ConfigEntry 8 } dsx1LoopbackConfig OBJECT-TYPE SYNTAX INTEGER { dsx1NoLoop(1), dsx1PayloadLoop(2), dsx1LineLoop(3), dsx1OtherLoop(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should return badValue in response to a requested loopback state that the interface does not support. The values mean: dsx1NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as it's value. dsx1PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for re- transmission after it has passed through the device's framing function. dsx1LineLoop The received signal at this interface does not go through the device (minimum pene- tration) but is looped back out. dsx1OtherLoop Loopbacks that are not defined here." ::= { dsx1ConfigEntry 9 } dsx1LineStatus OBJECT-TYPE SYNTAX INTEGER (1..8191) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The dsx1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. dsx1NoAlarm should be set if and only if no other flag is set. If the dsx1LoopbackState bit is set, the loopback in ef- fect can be determined from the dsx1LoopbackConfig object. The various bit positions are: 1 dsx1NoAlarm No Alarm Present 2 dsx1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm) 4 dsx1XmtFarEndLOF Near end sending LOF Indication 8 dsx1RcvAIS Far end sending AIS 16 dsx1XmtAIS Near end sending AIS 32 dsx1LossOfFrame Near end LOF (a.k.a., Red Alarm) 64 dsx1LossOfSignal Near end Loss Of Signal 128 dsx1LoopbackState Near end is looped 256 dsx1T16AIS E1 TS16 AIS 512 dsx1RcvFarEndLOMF Far End Sending TS16 LOMF 1024 dsx1XmtFarEndLOMF Near End Sending TS16 LOMF 2048 dsx1RcvTestCode Near End detects a test code 4096 dsx1OtherFailure any line status not defined here" ::= { dsx1ConfigEntry 10 } dsx1SignalMode OBJECT-TYPE SYNTAX INTEGER { none (1), robbedBit (2), bitOriented (3), messageOriented (4) } ACCESS read-only STATUS mandatory DESCRIPTION "'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that T1 Robbed Bit Sig- naling is in use. 'bitOriented' indicates that E1 Channel Asso- ciated Signaling is in use. 'messageOriented' indicates that Common Chan- nel Signaling is in use either on channel 16 of an E1 link or channel 24 of a T1." ::= { dsx1ConfigEntry 11 } dsx1TransmitClockSource OBJECT-TYPE SYNTAX INTEGER { loopTiming (1), localTiming (2), throughTiming (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. 'throughTiming' indicates that recovered re- ceive clock from another interface is used as the transmit clock." ::= { dsx1ConfigEntry 12 } dsx1Fdl OBJECT-TYPE SYNTAX INTEGER { other(1), dsx1Ansi-T1-403(2), dsx1Att-54016(4), dsx1Fdl-none(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a protocol other than one following is used. 'dsx1Ansi-T1-403' refers to the FDL exchange recommended by ANSI. 'dsx1Att-54016' refers to ESF FDL exchanges. 'dsx1Fdl-none' indicates that the device does not use the FDL." ::= { dsx1ConfigEntry 13 } dsx1FdlVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The version of the Dallas FDL firmware" ::= { dsx1ConfigEntry 14 } -- the DS1 Current Table -- The DS1 current table contains various statistics being -- collected for the current 15 minute interval. dsx1CurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1CurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS1 Current table." ::= { ds1 2 } dsx1CurrentEntry OBJECT-TYPE SYNTAX Dsx1CurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS1 Current table." INDEX { dsx1CurrentSlotId, dsx1CurrentPortId } ::= { dsx1CurrentTable 1 } Dsx1CurrentEntry ::= SEQUENCE { dsx1CurrentSlotId INTEGER, dsx1CurrentPortId INTEGER, dsx1CurrentESs Gauge, dsx1CurrentSESs Gauge, dsx1CurrentSEFSs Gauge, dsx1CurrentUASs Gauge, dsx1CurrentCSSs Gauge, dsx1CurrentBESs Gauge } dsx1CurrentSlotId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number of the corresponding DS1." ::= { dsx1CurrentEntry 1 } dsx1CurrentPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the corresponding DS1 on the board." ::= { dsx1CurrentEntry 2 } dsx1CurrentESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Errored Seconds, encountered by a DS1 interface in the current 15 minute inter- val." ::= { dsx1CurrentEntry 3 } dsx1CurrentSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Severely Errored Seconds encoun- tered by a DS1 interface in the current 15 minute interval." ::= { dsx1CurrentEntry 4 } dsx1CurrentSEFSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Severely Errored Framing Seconds encountered by a DS1 interface in the current 15 minute interval." ::= { dsx1CurrentEntry 5 } dsx1CurrentUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Unavailable Seconds encountered by a DS1 interface in the current 15 minute in- terval." ::= { dsx1CurrentEntry 6 } dsx1CurrentCSSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Controlled Slip Seconds encoun- tered by a DS1 interface in the current 15 minute interval." ::= { dsx1CurrentEntry 7 } dsx1CurrentBESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the current 15 minute interval." ::= {dsx1CurrentEntry 8 } -- the DS1 Interval -- The DS1 Interval Table contains various statistics -- collected by each DS1 Interface over the previous 24 hours of -- operation. The past 24 hours are broken into 96 completed -- 15 minute intervals. dsx1IntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1IntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS1 Interval table." ::= { ds1 3 } dsx1IntervalEntry OBJECT-TYPE SYNTAX Dsx1IntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS1 Interval table." INDEX { dsx1IntervalSlotId, dsx1IntervalPortId, dsx1IntervalNumber } ::= { dsx1IntervalTable 1 } Dsx1IntervalEntry ::= SEQUENCE { dsx1IntervalSlotId INTEGER, dsx1IntervalPortId INTEGER, dsx1IntervalNumber INTEGER, dsx1IntervalESs Gauge, dsx1IntervalSESs Gauge, dsx1IntervalSEFSs Gauge, dsx1IntervalUASs Gauge, dsx1IntervalCSSs Gauge, dsx1IntervalBESs Gauge } dsx1IntervalSlotId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number of the corresponding DS1." ::= { dsx1IntervalEntry 1 } dsx1IntervalPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the corresponding DS1 on the board." ::= { dsx1IntervalEntry 2 } dsx1IntervalNumber OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION "A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid)." ::= { dsx1IntervalEntry 3 } dsx1IntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Errored Seconds encountered by a DS1 interface in one of the previous 96, indi- vidual 15 minute, intervals." ::= { dsx1IntervalEntry 4 } dsx1IntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Severely Errored Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals." ::= { dsx1IntervalEntry 5 } dsx1IntervalSEFSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Severely Errored Framing Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals." ::= { dsx1IntervalEntry 6 } dsx1IntervalUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Unavailable Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals." ::= { dsx1IntervalEntry 7 } dsx1IntervalCSSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Controlled Slip Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals." ::= { dsx1IntervalEntry 8 } dsx1IntervalBESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals." ::= {dsx1IntervalEntry 9 } -- the DS1 Total -- The DS1 Total Table contains the cumulative sum of the -- various statistics for the 24 hour period preceding the -- current interval. dsx1TotalTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1TotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS1 Total table. 24 hour interval." ::= { ds1 4 } dsx1TotalEntry OBJECT-TYPE SYNTAX Dsx1TotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS1 Total table." INDEX { dsx1TotalSlotId, dsx1TotalPortId } ::= { dsx1TotalTable 1 } Dsx1TotalEntry ::= SEQUENCE { dsx1TotalSlotId INTEGER, dsx1TotalPortId INTEGER, dsx1TotalESs Gauge, dsx1TotalSESs Gauge, dsx1TotalSEFSs Gauge, dsx1TotalUASs Gauge, dsx1TotalCSSs Gauge, dsx1TotalBESs Gauge } dsx1TotalSlotId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number of the corresponding DS1." ::= { dsx1TotalEntry 1 } dsx1TotalPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the corresponding DS1 on the board." ::= { dsx1TotalEntry 2 } dsx1TotalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Errored Seconds encountered by a DS1 interface in the previous 24 hour interval" ::= { dsx1TotalEntry 3 } dsx1TotalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Severely Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval." ::= { dsx1TotalEntry 4 } dsx1TotalSEFSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval." ::= { dsx1TotalEntry 5 } dsx1TotalUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour in- terval." ::= { dsx1TotalEntry 6 } dsx1TotalCSSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Controlled Slip Seconds encoun- tered by a DS1 interface in the previous 24 hour interval." ::= { dsx1TotalEntry 7 } dsx1TotalBESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval." ::= { dsx1TotalEntry 8 } -- -- SMDS address : An SMDS address can be a local individual address -- assigned to a DXI/SNI, a local group address defined in the STDX, -- an individual address which is not assigned to any DXI/SNI in this -- STDX but is a member of an individual address screen, or can be -- a group address which is not defined in the STDX but is a member -- of a group address screen. -- smdsaddrTable OBJECT-TYPE SYNTAX SEQUENCE OF SmdsaddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of smds adress entries." ::= { smdsaddr 1 } smdsaddrEntry OBJECT-TYPE SYNTAX SmdsaddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An smds address and its associated information." INDEX { smdsaddrAddr } ::= { smdsaddrTable 1 } SmdsaddrEntry ::= SEQUENCE { smdsaddrAddr OCTET STRING, smdsaddrType INTEGER, smdsaddrId INTEGER, smdsaddrIf INTEGER, smdsaddrParentGrpMap OCTET STRING, smdsaddrParentScrnMap OCTET STRING, smdsaddrMemberAddrMap OCTET STRING, smdsaddrAdminStatus INTEGER, smdsaddrSlot INTEGER, smdsaddrSsiIfNum INTEGER } smdsaddrAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "SMDS address. The 4 most significant bits are the address type : 1100 for an individual address, 1110 for a group address. The following 4 bits are 0001. The following 5 bytes are the 10 digits number in BCD format. The following 16 bits are padded with 1's" ::= { smdsaddrEntry 1 } smdsaddrType OBJECT-TYPE SYNTAX INTEGER { local-individual-address(1), local-group-address(2), non-local-individual-address(3), non-local-group-address(4) } ACCESS read-write STATUS mandatory DESCRIPTION "SMDS address internal type." ::= { smdsaddrEntry 2 } smdsaddrId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "smds address internal ID. Range from 1 to 192 for local individual addresses. Range from 193 to 704 for Alien individual addresses. Range from 1 to 64 for local group addresses. Range from 65 to 576 for alien group addresses." ::= { smdsaddrEntry 3 } smdsaddrIf OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interface to which this address is assigned." ::= { smdsaddrEntry 4 } smdsaddrParentGrpMap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The parent group bit map. The bit position of each bit in this bit map represent a parent group address ID. The most significant bit is corresponding to group address ID 1. This MIB object applies to a local individual address only." ::= { smdsaddrEntry 5 } smdsaddrParentScrnMap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This MIB object not applicable to switch software versions 03.99.00 and above. The parent screen bit map. The bit position of each bit in this bit map represent a parent screen ID. The most significant bit is corresponding to screen ID 1." ::= { smdsaddrEntry 6 } smdsaddrMemberAddrMap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The member individual address bit map. For set request, the first byte is the operation : 1 for deleting, 2 for adding. The following bytes are the bit map. The bit position of each bit in this bit map represent a member local individual address ID. The most significant bit is corresponding to local individual address ID 1. For get response, The whole string is the bit map." ::= { smdsaddrEntry 7 } smdsaddrAdminStatus OBJECT-TYPE SYNTAX INTEGER { -- invalid(0), down(1), up(2) } ACCESS read-write STATUS mandatory DESCRIPTION "administration status" ::= { smdsaddrEntry 8 } smdsaddrSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Slot in which this address is assigned." ::= { smdsaddrEntry 9 } smdsaddrSsiIfNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The SSI to which this address is associated." ::= { smdsaddrEntry 10 } -- -- ISDN Addr Group -- -- The ISDN addr group is comprised of two tables: -- 1) indexed based on interface id, this table contains the lport E.164 address -- and the lport type - b-channel or sw56 -- 2) indexed based on interface id, this table contains valid caller ids -- isdnAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF IsdnAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of E.164 address entries." ::= { isdnaddr 1 } isdnAddrEntry OBJECT-TYPE SYNTAX IsdnAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a single local E.164 address in the table. Setting this varible to 0 removes the entry." INDEX { isdnAddrIf } ::= { isdnAddrTable 1 } IsdnAddrEntry ::= SEQUENCE { isdnAddrIf INTEGER, isdnAddr OCTET STRING, isdnChanType INTEGER } isdnAddrIf OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interface id of the logical port in question" ::= { isdnAddrEntry 1 } isdnAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "ISDN address. The actual E164 number. For example, ISDN address 15086922600 is stored as string 15086922600. Setting this value to a null string removes this entry." ::= { isdnAddrEntry 2 } isdnChanType OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " type of logical port 0 => isdn b-channel, 1 => sw56 " ::= { isdnAddrEntry 3} isdnCallerIDTable OBJECT-TYPE SYNTAX SEQUENCE OF IsdnCallerIDEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of valid caller ids " ::= { isdnaddr 2 } isdnCallerIDEntry OBJECT-TYPE SYNTAX IsdnCallerIDEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a single valid caller id." INDEX { isdnCallerIDIf, isdnCallerIDAddr } ::= { isdnCallerIDTable 1 } IsdnCallerIDEntry ::= SEQUENCE { isdnCallerIDIf INTEGER, isdnCallerIDAddr OCTET STRING, isdnCallerAdminStatus INTEGER } isdnCallerIDIf OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interface id of the logical port in question" ::= { isdnCallerIDEntry 1 } isdnCallerIDAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "ISDN address. The actual E164 number. For example, ISDN address 15086922600 is stored as string 15086922600." ::= { isdnCallerIDEntry 2 } isdnCallerAdminStatus OBJECT-TYPE SYNTAX INTEGER { -- remove (0), add (1) } ACCESS read-write STATUS mandatory DESCRIPTION "administration status" ::= { isdnCallerIDEntry 3 } -- The Service Name Binding Group -- -- The variables that are relevant to a Service Name Binding Table -- namebindingTable OBJECT-TYPE SYNTAX SEQUENCE OF NamebindingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of name bindings to a set of logical ports." ::= { namebinding 1 } namebindingEntry OBJECT-TYPE SYNTAX NamebindingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The name binding entry contains objects relative to a name binding." INDEX { nameType, nameName, namePrimary } ::= { namebindingTable 1 } NamebindingEntry ::= SEQUENCE { nameType INTEGER, nameName OCTET STRING, namePrimary INTEGER, nameIfIndex INTEGER, nameNodeId INTEGER, nameStatus INTEGER } nameType OBJECT-TYPE SYNTAX INTEGER { uninniladdr(1), -- this is a logical address for frame relay e164(2), -- this is an E.164 address nsap(3), -- this is an NSAP address sni(4) -- this is an SNI SMDS address } ACCESS read-write STATUS mandatory DESCRIPTION "The name type." ::= { namebindingEntry 1 } nameName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A name of the type indicated by nameType." ::= { namebindingEntry 2 } namePrimary OBJECT-TYPE SYNTAX INTEGER { primary(1), -- a primary backup backup(2) -- a backup binding } ACCESS read-write STATUS mandatory DESCRIPTION "The current binding type for this entry." ::= { namebindingEntry 3 } nameIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interface number of the logical port for this binding." ::= { namebindingEntry 4 } nameNodeId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier number of the node for this binding." ::= { namebindingEntry 5 } nameStatus OBJECT-TYPE SYNTAX INTEGER { active(1), -- binding is active invalid(2) -- binding is invalid and is deleted } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the binding." ::= { namebindingEntry 6 } -- The SVC Address Group -- -- The tables that are relevant to managing SVC addresses and prefixes -- in a Cascade network. -- -- -- SVC Node Prefix Table -- svcNodePrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcNodePrefixEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of prefixes associated with this node." ::= { svcaddress 1 } svcNodePrefixEntry OBJECT-TYPE SYNTAX SvcNodePrefixEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The node prefix entry contains objects relevant to SVC prefixes associated with the node." INDEX { svcNodePrefixPrefix } ::= { svcNodePrefixTable 1 } SvcNodePrefixEntry ::= SEQUENCE { svcNodePrefixPrefix OCTET STRING, svcNodePrefixNumBits INTEGER, svcNodePrefixNmbPlan INTEGER, svcNodePrefixAdminStatus INTEGER } svcNodePrefixPrefix OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) ACCESS read-only STATUS mandatory DESCRIPTION "A prefix associated with this node. E.164 prefixes are coded as 1-15 ASCII octets with no leading padding required. ATM endsystem prefixes are coded as 1-20 binary octets. Unused bits in the last octet must be set to 0." ::= { svcNodePrefixEntry 1 } svcNodePrefixNumBits OBJECT-TYPE SYNTAX INTEGER (1..160) ACCESS read-write STATUS mandatory DESCRIPTION "The number of valid bits associated with this entry's prefix object. By default, this value will be 8 times the prefix object's octet string length." ::= { svcNodePrefixEntry 2 } svcNodePrefixNmbPlan OBJECT-TYPE SYNTAX INTEGER { e164 (1), atm-endsystem (2), unknown (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The numbering plan corresponding to this entry's prefix object." ::= { svcNodePrefixEntry 3 } svcNodePrefixAdminStatus OBJECT-TYPE SYNTAX INTEGER { configured (1), -- this entry has been configured by NMS invalid (2) -- this entry shall be deleted } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this entry." ::= { svcNodePrefixEntry 4 } -- -- SVC Prefix Table -- svcPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcPrefixEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of SVC address prefixes associated with ports on this node." ::= { svcaddress 2 } svcPrefixEntry OBJECT-TYPE SYNTAX SvcPrefixEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The prefix entry contains objects relevant to SVC prefixes associated with this port." INDEX { svcPrefixIfIndex, svcPrefixPrefix } ::= { svcPrefixTable 1 } SvcPrefixEntry ::= SEQUENCE { svcPrefixIfIndex Index, svcPrefixPrefix OCTET STRING, svcPrefixNumBits INTEGER, svcPrefixNmbPlan INTEGER, svcPrefixAdminCost INTEGER, svcPrefixLocalGatewayAddress OCTET STRING, svcPrefixLocalGatewayNmbPlan INTEGER, svcPrefixRemoteGatewayAddress OCTET STRING, svcPrefixRemoteGatewayNmbPlan INTEGER, svcPrefixAdminStatus INTEGER } svcPrefixIfIndex OBJECT-TYPE SYNTAX Index ACCESS read-only STATUS mandatory DESCRIPTION "The interface value of the corresponding MIB-II ifEntry." ::= { svcPrefixEntry 1 } svcPrefixPrefix OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) ACCESS read-only STATUS mandatory DESCRIPTION "A prefix associated with this port. E.164 prefixes are coded as 1-15 ASCII octets with no leading padding required. ATM endsystem prefixes are coded as 1-20 binary octets. Unused bits in the last octet must be set to 0. For ATM DCE ports, only, atm-endsystem prefixes with length 104 bits (13 octets) and all E.164 prefixes are eligible for ILMI address registration." ::= { svcPrefixEntry 2 } svcPrefixNumBits OBJECT-TYPE SYNTAX INTEGER (1..160) ACCESS read-write STATUS mandatory DESCRIPTION "The number of valid bits associated with this entry's prefix object. By default, this value will be 8 times the prefix object's octet string length." ::= { svcPrefixEntry 3 } svcPrefixNmbPlan OBJECT-TYPE SYNTAX INTEGER { e164 (1), atm-endsystem (2), unknown (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The numbering plan corresponding to this entry's prefix object." ::= { svcPrefixEntry 4 } svcPrefixAdminCost OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This object is only relevant for ports connecting this network to another network and is used to represent the administrative cost of reaching destinations containing this entry's prefix value." ::= { svcPrefixEntry 5 } svcPrefixLocalGatewayAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This object is only relevant for ports connecting this network to another network and is used to replace the calling party number when egress address translation is configured to the appropriate mode. E.164 addresses are coded as 1-15 ASCII octets Atm-endsystem addresses are coded as 20 octet binary addresses." ::= { svcPrefixEntry 6 } svcPrefixLocalGatewayNmbPlan OBJECT-TYPE SYNTAX INTEGER { e164 (1), atm-endsystem (2), unknown (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The numbering plan corresponding to this entry's local gateway address object." ::= { svcPrefixEntry 7 } svcPrefixRemoteGatewayAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This object is only relevant for ports connecting this network to another network and is used to replace the calling party number when egress address translation is configured to the appropriate mode. E.164 addresses are coded as 1-15 ASCII octets Atm-endsystem addresses are coded as 20 octet binary addresses." ::= { svcPrefixEntry 8 } svcPrefixRemoteGatewayNmbPlan OBJECT-TYPE SYNTAX INTEGER { e164 (1), atm-endsystem (2), unknown (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The numbering plan corresponding to this entry's remote gateway address object." ::= { svcPrefixEntry 9 } svcPrefixAdminStatus OBJECT-TYPE SYNTAX INTEGER { configured (1), -- this entry has been configured by NMS invalid (2), -- this entry shall be deleted dynamic (3) -- this entry created via peer device (ATM UNI DTE, only) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this entry." ::= { svcPrefixEntry 10 } -- -- SVC Addr Table -- svcAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of SVC addresses associated with with ports on this node." ::= { svcaddress 3 } svcAddrEntry OBJECT-TYPE SYNTAX SvcAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The address entry contains objects relevant to SVC addresses associated with this port." INDEX { svcAddrIfIndex, svcAddrAddress } ::= { svcAddrTable 1 } SvcAddrEntry ::= SEQUENCE { svcAddrIfIndex Index, svcAddrAddress OCTET STRING, svcAddrNmbPlan INTEGER, svcAddrAdminStatus INTEGER } svcAddrIfIndex OBJECT-TYPE SYNTAX Index ACCESS read-only STATUS mandatory DESCRIPTION "The interface value of the corresponding MIB-II ifEntry." ::= { svcAddrEntry 1 } svcAddrAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) ACCESS read-only STATUS mandatory DESCRIPTION "An address associated with this port. E.164 addresses are coded as 1-15 ASCII octets. ATM-Endsystem addresses are coded as 20 binary octets." ::= { svcAddrEntry 2 } svcAddrNmbPlan OBJECT-TYPE SYNTAX INTEGER { e164 (1), atm-endsystem (2), unknown (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The numbering plan corresponding to this entry's address object." ::= { svcAddrEntry 3 } svcAddrAdminStatus OBJECT-TYPE SYNTAX INTEGER { configured (1), -- this entry has been configured by NMS invalid (2), -- this entry shall be deleted dynamic (3) -- this entry created by peer device (ATM UNI DCE, only) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this entry." ::= { svcAddrEntry 4 } -- -- SVC ATM User Part Table -- svcAtmUserPartTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcAtmUserPartEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of partial SVC addresses associated with ports on this node, relevant only to ATM DTE ports for use in ILMI address registration." ::= { svcaddress 4 } svcAtmUserPartEntry OBJECT-TYPE SYNTAX SvcAtmUserPartEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The user part entry contains objects relevant to partial SVC addresses associated with ATM DTE ports on this node." INDEX { svcAtmUserPartIfIndex, svcAtmUserPartUserPart } ::= { svcAtmUserPartTable 1 } SvcAtmUserPartEntry ::= SEQUENCE { svcAtmUserPartIfIndex Index, svcAtmUserPartUserPart OCTET STRING, svcAtmUserPartAdminStatus INTEGER } svcAtmUserPartIfIndex OBJECT-TYPE SYNTAX Index ACCESS read-only STATUS mandatory DESCRIPTION "The interface value of the corresponding MIB-II ifEntry." ::= { svcAtmUserPartEntry 1 } svcAtmUserPartUserPart OBJECT-TYPE SYNTAX OCTET STRING (SIZE(7)) ACCESS read-only STATUS mandatory DESCRIPTION "A partial ATM endsystem address associated with this ATM DTE port. It will be combined with ATM endsystem prefixes received from the peer DCE to form a full ATM endsystem address. This object is coded as 7 binary octets." ::= { svcAtmUserPartEntry 2 } svcAtmUserPartAdminStatus OBJECT-TYPE SYNTAX INTEGER { configured (1), -- this entry has been configured by NMS invalid (2) -- this entry shall be deleted } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this entry." ::= { svcAtmUserPartEntry 3 } -- The SVC Management Group -- -- The tables that are relevant to managing ATM SVC's in a Cascade network. -- -- -- SVC Configuration Table -- svcConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of SVC configuration paramaters associated with logical ports. The number of entries is given by the value of ifNumber in MIB-II." ::= { svcmgt 1 } svcConfigEntry OBJECT-TYPE SYNTAX SvcConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SVC configuration entry contains objects relevant to SVC operation on a logical port." INDEX { svcConfigIfIndex } ::= { svcConfigTable 1 } SvcConfigEntry ::= SEQUENCE { svcConfigIfIndex Index, svcConfigInitiateIdentStatsUpload IpAddress, svcConfigCgPtyInsertionMode INTEGER, svcConfigCgPtyInsertionAddress OCTET STRING, svcConfigCgPtyInsertionNmbPlan INTEGER, svcConfigCgPtyScreenMode INTEGER, svcConfigEgressAddrXlateMode INTEGER, svcConfigIngressAddrXlateMode INTEGER, svcConfigCgPtyPresentationMode INTEGER } svcConfigIfIndex OBJECT-TYPE SYNTAX Index ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex value of the corresponding ifEntry." ::= { svcConfigEntry 1 } svcConfigInitiateIdentStatsUpload OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object initiates a TFTP upload of SVC identification statistics to the specified IP address. These statistics may be used to identify SVC's of interest on this port and to determine the keys for those SVC's so that further information may be obtained by accessing the circuit table." ::= { svcConfigEntry 2 } svcConfigCgPtyInsertionMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), insert (2), -- insert when absent replace (3) -- insert/replace always } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines whether a statically configured address shall be inserted in the calling party address IE for calls entering the network at this port." ::= { svcConfigEntry 3 } svcConfigCgPtyInsertionAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(15..20)) ACCESS read-write STATUS mandatory DESCRIPTION "The calling party address to use in conjunction with the calling party insertion function. E.164 addresses are coded as 15 ASCII octets, utilizing leading ASCII '0' characters, as necessary. Atm-endsystem addresses are coded as 20 octet binary addresses." ::= { svcConfigEntry 4 } svcConfigCgPtyInsertionNmbPlan OBJECT-TYPE SYNTAX INTEGER { e164 (1), atm-endsystem (2), unknown (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The numbering plan corresponding to this entry's calling party insertion address object." ::= { svcConfigEntry 5 } svcConfigCgPtyScreenMode OBJECT-TYPE SYNTAX INTEGER { node-prefix (1), port-prefix (2), node-prefix-or-port-prefix (3), address (4), node-prefix-or-address (5), port-prefix-or-address (6), node-prefix-or-port-prefix-or-address (7), disabled (255) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of screening to perform on the calling party number for calls entering the network at this port. Screening will be conducted by performing a bit-wise (for prefixes) or byte-wise (for addresses) comparison of the calling party number with the appropriate prefix or address database(s), as configured." ::= { svcConfigEntry 6 } svcConfigEgressAddrXlateMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), tunnel-when-called-party-matches-prefix (2), replace-when-called-party-matches-prefix (3), translate-e164-native-to-nsap (4), translate-e164-nsap-to-native (5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines the type of address translation, if any to occur for calls exiting the network at this port. The tunnelling mode will screen the called address against the prefixes configured for this port. If no match is found, no action is taken. If a remote gateway address is configured for the matching prefix entry, the called party address will be tunnelled as a called subaddress and the configured remote gateway address will be inserted as the called party address. If a local gateway address is configured for the matching prefix entry, the calling party address, if present, will be tunnelled as a calling subaddress and the configured local gateway address, if present, will be inserted as the calling party. The replacement mode will operate as does the tunnelling mode, except the original called and calling party addresses will be discarded. The two translation modes are used for address interworking between networks using E.164 ATM Endsystem addresses and native ISDN E.164 addresses." ::= { svcConfigEntry 7 } svcConfigIngressAddrXlateMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), tunnel(2), translate-e164-native-to-nsap (4), translate-e164-nsap-to-native (5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines the type of address translation, if any to occur for calls entering the network at this port. The tunnelling mode reverses the actions of egress tunnelling. If a called subaddress is present, it will replace the called party address, which will be discarded. If a calling subaddress is present, it will replace the calling party address, which will be discarded. The two translation modes are used for address interworking between networks using E.164 ATM Endsystem addresses and native ISDN E.164 addresses." ::= { svcConfigEntry 8 } svcConfigCgPtyPresentationMode OBJECT-TYPE SYNTAX INTEGER { user (1), -- use signalled presentation indicator never (2), -- override signalled presentation and never present always (3) -- override signalled presentation and always present } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls the circumstances under which the calling party number shall be presented at the egress port of the network." ::= { svcConfigEntry 9 } -- -- SVC ATM Configuration Table -- svcAtmConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcAtmConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of ATM signalling paramaters associated with ATM logical ports. The maximum number of entries is given by the value of ifNumber in MIB-II." ::= { svcmgt 2 } svcAtmConfigEntry OBJECT-TYPE SYNTAX SvcAtmConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SVC ATM configuration entry contains objects relevant to the configuration and monitoring of ATM signalling on an ATM logical port." INDEX { svcAtmConfigIfIndex } ::= { svcAtmConfigTable 1 } SvcAtmConfigEntry ::= SEQUENCE { svcAtmConfigIfIndex Index, svcAtmConfigAdminStatus INTEGER, svcAtmConfigOperStatus INTEGER, svcAtmConfigQ93bMaxRestart INTEGER, svcAtmConfigQ93bMaxStatEnq INTEGER, svcAtmConfigQ93bT303 INTEGER, svcAtmConfigQ93bT308 INTEGER, svcAtmConfigQ93bT309 INTEGER, svcAtmConfigQ93bT310 INTEGER, svcAtmConfigQ93bT313 INTEGER, svcAtmConfigQ93bT316 INTEGER, svcAtmConfigQ93bT322 INTEGER, svcAtmConfigQ93bT398 INTEGER, svcAtmConfigQ93bT399 INTEGER, svcAtmConfigQ93bTotalConns Counter, svcAtmConfigQ93bActiveConns Counter, svcAtmConfigQ93bLastCauseTx INTEGER, svcAtmConfigQ93bLastCauseRx INTEGER, svcAtmConfigQ93bNumSetupPduTx Counter, svcAtmConfigQ93bNumSetupPduRx Counter, svcAtmConfigQ93bNumCallProcPduTx Counter, svcAtmConfigQ93bNumCallProcPduRx Counter, svcAtmConfigQ93bNumConnectPduTx Counter, svcAtmConfigQ93bNumConnectPduRx Counter, svcAtmConfigQ93bNumConnectAckPduTx Counter, svcAtmConfigQ93bNumConnectAckPduRx Counter, svcAtmConfigQ93bNumReleasePduTx Counter, svcAtmConfigQ93bNumReleasePduRx Counter, svcAtmConfigQ93bNumReleaseCmpltPduTx Counter, svcAtmConfigQ93bNumReleaseCmpltPduRx Counter, svcAtmConfigQ93bNumAddPtyPduTx Counter, svcAtmConfigQ93bNumAddPtyPduRx Counter, svcAtmConfigQ93bNumAddPtyAckPduTx Counter, svcAtmConfigQ93bNumAddPtyAckPduRx Counter, svcAtmConfigQ93bNumAddPtyRejPduTx Counter, svcAtmConfigQ93bNumAddPtyRejPduRx Counter, svcAtmConfigQ93bNumDropPtyPduTx Counter, svcAtmConfigQ93bNumDropPtyPduRx Counter, svcAtmConfigQ93bNumDropPtyAckPduTx Counter, svcAtmConfigQ93bNumDropPtyAckPduRx Counter, svcAtmConfigQ93bNumStatusEnqPduTx Counter, svcAtmConfigQ93bNumStatusEnqPduRx Counter, svcAtmConfigQ93bNumStatusPduTx Counter, svcAtmConfigQ93bNumStatusPduRx Counter, svcAtmConfigQ93bNumRestartPduTx Counter, svcAtmConfigQ93bNumRestartPduRx Counter, svcAtmConfigQ93bNumRestartAckPduTx Counter, svcAtmConfigQ93bNumRestartAckPduRx Counter, svcAtmConfigQSaalMaxCC INTEGER, svcAtmConfigQSaalMaxPD INTEGER, svcAtmConfigQSaalMaxStat INTEGER, svcAtmConfigQSaalTPoll INTEGER, svcAtmConfigQSaalTKeepalive INTEGER, svcAtmConfigQSaalTNoResponse INTEGER, svcAtmConfigQSaalTCC INTEGER, svcAtmConfigQSaalTIdle INTEGER, svcAtmConfigQSaalNumDiscardTx Counter, svcAtmConfigQSaalNumDiscardRx Counter, svcAtmConfigQSaalNumErrorTx Counter, svcAtmConfigQSaalNumErrorRx Counter, svcAtmConfigQSaalNumBgnPduTx Counter, svcAtmConfigQSaalNumBgnPduRx Counter, svcAtmConfigQSaalNumBgakPduTx Counter, svcAtmConfigQSaalNumBgakPduRx Counter, svcAtmConfigQSaalNumBgrejPduTx Counter, svcAtmConfigQSaalNumBgrejPduRx Counter, svcAtmConfigQSaalNumEndPduTx Counter, svcAtmConfigQSaalNumEndPduRx Counter, svcAtmConfigQSaalNumEndakPduTx Counter, svcAtmConfigQSaalNumEndakPduRx Counter, svcAtmConfigQSaalNumRsPduTx Counter, svcAtmConfigQSaalNumRsPduRx Counter, svcAtmConfigQSaalNumRsakPduTx Counter, svcAtmConfigQSaalNumRsakPduRx Counter, svcAtmConfigQSaalNumErPduTx Counter, svcAtmConfigQSaalNumErPduRx Counter, svcAtmConfigQSaalNumErakPduTx Counter, svcAtmConfigQSaalNumErakPduRx Counter, svcAtmConfigQSaalNumSdPduTx Counter, svcAtmConfigQSaalNumSdPduRx Counter, svcAtmConfigQSaalNumPollPduTx Counter, svcAtmConfigQSaalNumPollPduRx Counter, svcAtmConfigQSaalNumStatPduTx Counter, svcAtmConfigQSaalNumStatPduRx Counter, svcAtmConfigQSaalNumUstatPduTx Counter, svcAtmConfigQSaalNumUstatPduRx Counter, svcAtmConfigQSaalNumUdPduTx Counter, svcAtmConfigQSaalNumUdPduRx Counter, svcAtmConfigQSaalNumMdPduTx Counter, svcAtmConfigQSaalNumMdPduRx Counter } svcAtmConfigIfIndex OBJECT-TYPE SYNTAX Index ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex value of the corresponding ifEntry." ::= { svcAtmConfigEntry 1 } svcAtmConfigAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The configured state of the ATM signalling function for this port." ::= { svcAtmConfigEntry 2 } svcAtmConfigOperStatus OBJECT-TYPE SYNTAX INTEGER { down (1), connecting (2), up (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The operational status of the signalling function on this port." ::= { svcAtmConfigEntry 3 } svcAtmConfigQ93bMaxRestart OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of unacknowledged restarts to send before declaring a signalling failure." ::= { svcAtmConfigEntry 4 } svcAtmConfigQ93bMaxStatEnq OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of unacknowledged status enquiries to send before issuing a restart." ::= { svcAtmConfigEntry 5 } svcAtmConfigQ93bT303 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Protocol Timer T303, specified in milliseconds." ::= { svcAtmConfigEntry 6 } svcAtmConfigQ93bT308 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Protocol Timer T308, specified in milliseconds." ::= { svcAtmConfigEntry 7 } svcAtmConfigQ93bT309 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Protocol Timer T309, specified in milliseconds." ::= { svcAtmConfigEntry 8 } svcAtmConfigQ93bT310 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Protocol Timer T310, specified in milliseconds." ::= { svcAtmConfigEntry 9 } svcAtmConfigQ93bT313 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Protocol Timer T313, specified in milliseconds." ::= { svcAtmConfigEntry 10 } svcAtmConfigQ93bT316 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Protocol Timer T316, specified in milliseconds." ::= { svcAtmConfigEntry 11 } svcAtmConfigQ93bT322 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Protocol Timer T322, specified in milliseconds." ::= { svcAtmConfigEntry 12 } svcAtmConfigQ93bT398 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Protocol Timer T398, specified in milliseconds." ::= { svcAtmConfigEntry 13 } svcAtmConfigQ93bT399 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Protocol Timer T399, specified in milliseconds." ::= { svcAtmConfigEntry 14 } svcAtmConfigQ93bTotalConns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SVC's established on this port." ::= { svcAtmConfigEntry 15 } svcAtmConfigQ93bActiveConns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of SVC's present on this port." ::= { svcAtmConfigEntry 16 } svcAtmConfigQ93bLastCauseTx OBJECT-TYPE SYNTAX INTEGER { unalloc-nmb (1), -- unallocated (unassigned) number no-route-transnet (2), -- no route to transit network no-route-dest (3), -- no route to destination vcc-unacceptable-30 (10), -- UNI 3.0: VPCI/VCI unacceptable normal-call-clr-31 (16), -- UNI 3.1: normal call clearing user-busy (17), -- user busy no-user-response (18), -- no user response call-reject (21), -- call rejected nmb-changed (22), -- number changed call-reject-clir (23), -- user rejects all calls with CLIR dest-out-of-order (27), -- destination out of order invalid-nmb-format (28), -- invalid number format response-stat-enq (30), -- response to STATUS ENQUIRY normal-unspecified (31), -- normal unspecified req-vcc-unavailable (35), -- requested VPCI/VCI unavailable vcc-fail-31 (36), -- UNI 3.1: VPCI/VCI assignment failure rate-unavail-31 (37), -- UNI 3.1: user cell rate unavailable network-out-of-order (38), -- network out of order temp-fail (41), -- Temporary failure access-info-discard (43), -- access info discarded no-vcc-available (45), -- no VPCI/VCI unavailable resources-unavailable (47), -- resources unavailable, unspecified qos-unavailable (49), -- Quality of Service unavailable rate-unavailable-30 (51), -- UNI 3.0: user cell rate unavailable b-cap-not-authorized (57), -- bearer capability not authorized b-cap-unavailable (58), -- bearer capability not available service-unavailable (63), -- Service or option unavailable b-cap-not-implemented (65), -- bearer capability not implemented combination-unsupported (73), -- unsupported comb. of traffic parameters aal-params-unsupp-31 (78), -- UNI 3.1: AAL paramteres cannot be supported invalid-call-reference (81), -- invalid call reference no-channel (82), -- identified channel does not exist dest-incompatible (88), -- incompatible destination invalid-endpoint-ref (89), -- invalid endpoint reference invalid-transit-net (91), -- invalid transit network selection too-many-add-pty-req (92), -- too many add party requests aal-params-unsupp-30 (93), -- UNI 3.0:AAL paramteres cannot be supported info-element-missing (96), -- mandatory info element is missing msg-type-not-imp (97), -- message type not implemented info-element-not-imp (99), -- info element not implemented invalid-info-element (100), -- invalid info element message-not-compatible (101), -- msg type not compatible with call st timer-recovery (102), -- recovery on timer expiry invalid-message-len (104), -- incorrect message length protocol-error (111), -- protocol error, unspecified optional-element-error (127) -- opt info el content error (non-std) } ACCESS read-only STATUS mandatory DESCRIPTION "The last transmitted cause code for this port." ::= { svcAtmConfigEntry 17 } svcAtmConfigQ93bLastCauseRx OBJECT-TYPE SYNTAX INTEGER { unalloc-nmb (1), -- unallocated (unassigned) number no-route-transnet (2), -- no route to transit network no-route-dest (3), -- no route to destination vcc-unacceptable-30 (10), -- UNI 3.0: VPCI/VCI unacceptable normal-call-clr-31 (16), -- UNI 3.1: normal call clearing user-busy (17), -- user busy no-user-response (18), -- no user response call-reject (21), -- call rejected nmb-changed (22), -- number changed call-reject-clir (23), -- user rejects all calls with CLIR dest-out-of-order (27), -- destination out of order invalid-nmb-format (28), -- invalid number format response-stat-enq (30), -- response to STATUS ENQUIRY normal-unspecified (31), -- normal unspecified req-vcc-unavailable (35), -- requested VPCI/VCI unavailable vcc-fail-31 (36), -- UNI 3.1: VPCI/VCI assignment failure rate-unavail-31 (37), -- UNI 3.1: user cell rate unavailable network-out-of-order (38), -- network out of order temp-fail (41), -- Temporary failure access-info-discard (43), -- access info discarded no-vcc-available (45), -- no VPCI/VCI unavailable resources-unavailable (47), -- resources unavailable, unspecified qos-unavailable (49), -- Quality of Service unavailable rate-unavailable-30 (51), -- UNI 3.0: user cell rate unavailable b-cap-not-authorized (57), -- bearer capability not authorized b-cap-unavailable (58), -- bearer capability not available service-unavailable (63), -- Service or option unavailable b-cap-not-implemented (65), -- bearer capability not implemented combination-unsupported (73), -- unsupported comb. of traffic parameters aal-params-unsupp-31 (78), -- UNI 3.1: AAL paramteres cannot be supported invalid-call-reference (81), -- invalid call reference no-channel (82), -- identified channel does not exist dest-incompatible (88), -- incompatible destination invalid-endpoint-ref (89), -- invalid endpoint reference invalid-transit-net (91), -- invalid transit network selection too-many-add-pty-req (92), -- too many add party requests aal-params-unsupp-30 (93), -- UNI 3.0:AAL paramteres cannot be supported info-element-missing (96), -- mandatory info element is missing msg-type-not-imp (97), -- message type not implemented info-element-not-imp (99), -- info element not implemented invalid-info-element (100), -- invalid info element message-not-compatible (101), -- msg type not compatible with call st timer-recovery (102), -- recovery on timer expiry invalid-message-len (104), -- incorrect message length protocol-error (111), -- protocol error, unspecified optional-element-error (127) -- opt info el content error (non-std) } ACCESS read-only STATUS mandatory DESCRIPTION "The last received cause code for this port." ::= { svcAtmConfigEntry 18 } svcAtmConfigQ93bNumSetupPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of setup PDU's transmitted on this port." ::= { svcAtmConfigEntry 19 } svcAtmConfigQ93bNumSetupPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of setup PDU's received on this port." ::= { svcAtmConfigEntry 20 } svcAtmConfigQ93bNumCallProcPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of call proceeding PDU's transmitted on this port." ::= { svcAtmConfigEntry 21 } svcAtmConfigQ93bNumCallProcPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of call proceeding PDU's received on this port." ::= { svcAtmConfigEntry 22 } svcAtmConfigQ93bNumConnectPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of connect PDU's transmitted on this port." ::= { svcAtmConfigEntry 23 } svcAtmConfigQ93bNumConnectPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of connect PDU's received on this port." ::= { svcAtmConfigEntry 24 } svcAtmConfigQ93bNumConnectAckPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of connect ack PDU's transmitted on this port." ::= { svcAtmConfigEntry 25 } svcAtmConfigQ93bNumConnectAckPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of connect ack PDU's received on this port." ::= { svcAtmConfigEntry 26 } svcAtmConfigQ93bNumReleasePduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of release PDU's transmitted on this port." ::= { svcAtmConfigEntry 27 } svcAtmConfigQ93bNumReleasePduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of release PDU's received on this port." ::= { svcAtmConfigEntry 28 } svcAtmConfigQ93bNumReleaseCmpltPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of release complete PDU's transmitted on this port." ::= { svcAtmConfigEntry 29 } svcAtmConfigQ93bNumReleaseCmpltPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of release complete PDU's received on this port." ::= { svcAtmConfigEntry 30 } svcAtmConfigQ93bNumAddPtyPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of add party PDU's transmitted on this port." ::= { svcAtmConfigEntry 31 } svcAtmConfigQ93bNumAddPtyPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of add party PDU's received on this port." ::= { svcAtmConfigEntry 32 } svcAtmConfigQ93bNumAddPtyAckPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of add party acknowledge PDU's transmitted on this port." ::= { svcAtmConfigEntry 33 } svcAtmConfigQ93bNumAddPtyAckPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of add party acknowledge PDU's received on this port." ::= { svcAtmConfigEntry 34 } svcAtmConfigQ93bNumAddPtyRejPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of add party reject PDU's transmitted on this port." ::= { svcAtmConfigEntry 35 } svcAtmConfigQ93bNumAddPtyRejPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of add party reject PDU's received on this port." ::= { svcAtmConfigEntry 36 } svcAtmConfigQ93bNumDropPtyPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of drop party PDU's transmitted on this port." ::= { svcAtmConfigEntry 37 } svcAtmConfigQ93bNumDropPtyPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of drop party PDU's received on this port." ::= { svcAtmConfigEntry 38 } svcAtmConfigQ93bNumDropPtyAckPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of drop party acknowledge PDU's transmitted on this port." ::= { svcAtmConfigEntry 39 } svcAtmConfigQ93bNumDropPtyAckPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of drop party acknowledge PDU's received on this port." ::= { svcAtmConfigEntry 40 } svcAtmConfigQ93bNumStatusEnqPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of status enquiry PDU's transmitted on this port." ::= { svcAtmConfigEntry 41 } svcAtmConfigQ93bNumStatusEnqPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of status enquiry PDU's received on this port." ::= { svcAtmConfigEntry 42 } svcAtmConfigQ93bNumStatusPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of status PDU's transmitted on this port." ::= { svcAtmConfigEntry 43 } svcAtmConfigQ93bNumStatusPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of status PDU's received on this port." ::= { svcAtmConfigEntry 44 } svcAtmConfigQ93bNumRestartPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of restart PDU's transmitted on this port." ::= { svcAtmConfigEntry 45 } svcAtmConfigQ93bNumRestartPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of restart PDU's received on this port." ::= { svcAtmConfigEntry 46 } svcAtmConfigQ93bNumRestartAckPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of restart acknowledge PDU's transmitted on this port." ::= { svcAtmConfigEntry 47 } svcAtmConfigQ93bNumRestartAckPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of restart acknowledge PDU's received on this port." ::= { svcAtmConfigEntry 48 } svcAtmConfigQSaalMaxCC OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of unacknowledged transmitted control PDU's before declaring a loss of connection." ::= { svcAtmConfigEntry 49 } svcAtmConfigQSaalMaxPD OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of PDU's transmitted before a POLL PDU is transmitted." ::= { svcAtmConfigEntry 50 } svcAtmConfigQSaalMaxStat OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of list elements in a STAT PDU." ::= { svcAtmConfigEntry 51 } svcAtmConfigQSaalTPoll OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The protocol timer corresponding to the polling function, specified in milliseconds." ::= { svcAtmConfigEntry 52 } svcAtmConfigQSaalTKeepalive OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The protocol timer corresponding to the keepalive function, specified in milliseconds." ::= { svcAtmConfigEntry 53 } svcAtmConfigQSaalTNoResponse OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The protocol timer corresponding to the response timeout function, specified in milliseconds." ::= { svcAtmConfigEntry 54 } svcAtmConfigQSaalTCC OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The protocol timer corresponding to the transmission of control PDU's, specified in milliseconds." ::= { svcAtmConfigEntry 55 } svcAtmConfigQSaalTIdle OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The protocol timer corresponding to the idle function for UNI 3.1, only, specified in milliseconds." ::= { svcAtmConfigEntry 56 } svcAtmConfigQSaalNumDiscardTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of QSaal transmit discards on this port." ::= { svcAtmConfigEntry 57 } svcAtmConfigQSaalNumDiscardRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of QSaal receive discards on this port." ::= { svcAtmConfigEntry 58 } svcAtmConfigQSaalNumErrorTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of QSaal transmit errors on this port." ::= { svcAtmConfigEntry 59 } svcAtmConfigQSaalNumErrorRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of QSaal receive errors on this port." ::= { svcAtmConfigEntry 60 } svcAtmConfigQSaalNumBgnPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of begin PDU's transmitted on this port." ::= { svcAtmConfigEntry 61 } svcAtmConfigQSaalNumBgnPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of begin PDU's received on this port." ::= { svcAtmConfigEntry 62 } svcAtmConfigQSaalNumBgakPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of begin acknowledge PDU's transmitted on this port." ::= { svcAtmConfigEntry 63 } svcAtmConfigQSaalNumBgakPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of begin acknowledge PDU's received on this port." ::= { svcAtmConfigEntry 64 } svcAtmConfigQSaalNumBgrejPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of begin reject PDU's transmitted on this port." ::= { svcAtmConfigEntry 65 } svcAtmConfigQSaalNumBgrejPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of begin reject PDU's received on this port." ::= { svcAtmConfigEntry 66 } svcAtmConfigQSaalNumEndPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of end PDU's transmitted on this port." ::= { svcAtmConfigEntry 67 } svcAtmConfigQSaalNumEndPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of end PDU's received on this port." ::= { svcAtmConfigEntry 68 } svcAtmConfigQSaalNumEndakPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of end acknowledge PDU's transmitted on this port." ::= { svcAtmConfigEntry 69 } svcAtmConfigQSaalNumEndakPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of end acknowldge PDU's received on this port." ::= { svcAtmConfigEntry 70 } svcAtmConfigQSaalNumRsPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of resynchronization PDU's transmitted on this port." ::= { svcAtmConfigEntry 71 } svcAtmConfigQSaalNumRsPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of resynchronization PDU's received on this port." ::= { svcAtmConfigEntry 72 } svcAtmConfigQSaalNumRsakPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of resynchronization acknowledge PDU's transmitted on this port." ::= { svcAtmConfigEntry 73 } svcAtmConfigQSaalNumRsakPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of resynchronization acknowldge PDU's received on this port." ::= { svcAtmConfigEntry 74 } svcAtmConfigQSaalNumErPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of error recovery PDU's transmitted on this port." ::= { svcAtmConfigEntry 75 } svcAtmConfigQSaalNumErPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of errror recovery PDU's received on this port." ::= { svcAtmConfigEntry 76 } svcAtmConfigQSaalNumErakPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of error recovery acknowledge PDU's transmitted on this port." ::= { svcAtmConfigEntry 77 } svcAtmConfigQSaalNumErakPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of errror recovery acknowledge PDU's received on this port." ::= { svcAtmConfigEntry 78 } svcAtmConfigQSaalNumSdPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of sequenced data PDU's transmitted on this port." ::= { svcAtmConfigEntry 79 } svcAtmConfigQSaalNumSdPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of sequenced data PDU's received on this port." ::= { svcAtmConfigEntry 80 } svcAtmConfigQSaalNumPollPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of poll PDU's transmitted on this port." ::= { svcAtmConfigEntry 81 } svcAtmConfigQSaalNumPollPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of poll PDU's received on this port." ::= { svcAtmConfigEntry 82 } svcAtmConfigQSaalNumStatPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of status PDU's transmitted on this port." ::= { svcAtmConfigEntry 83 } svcAtmConfigQSaalNumStatPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of status PDU's received on this port." ::= { svcAtmConfigEntry 84 } svcAtmConfigQSaalNumUstatPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unsolicited status PDU's transmitted on this port." ::= { svcAtmConfigEntry 85 } svcAtmConfigQSaalNumUstatPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unsolicited status PDU's received on this port." ::= { svcAtmConfigEntry 86 } svcAtmConfigQSaalNumUdPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unnumbered user data PDU's transmitted on this port." ::= { svcAtmConfigEntry 87 } svcAtmConfigQSaalNumUdPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unnumbered user data PDU's received on this port." ::= { svcAtmConfigEntry 88 } svcAtmConfigQSaalNumMdPduTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unnumbered management data PDU's transmitted on this port." ::= { svcAtmConfigEntry 89 } svcAtmConfigQSaalNumMdPduRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of unnumbered management data PDU's received on this port." ::= { svcAtmConfigEntry 90 } -- -- SVC ATM Failed Call Table -- svcAtmFailedCallTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcAtmFailedCallEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of objects describing the N most recent SVC failures per port, in FIFO order." ::= { svcmgt 3 } svcAtmFailedCallEntry OBJECT-TYPE SYNTAX SvcAtmFailedCallEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The failed call entry contains objects relevant to abnormal SVC call failures." INDEX { svcAtmFailedCallIfIndex, svcAtmFailedCallIndex } ::= { svcAtmFailedCallTable 1 } SvcAtmFailedCallEntry ::= SEQUENCE { svcAtmFailedCallIfIndex Index, svcAtmFailedCallIndex INTEGER, svcAtmFailedCallDirection INTEGER, svcAtmFailedCallPduType INTEGER, svcAtmFailedCallPduDirection INTEGER, svcAtmFailedCallCause INTEGER, svcAtmFailedCallLocation INTEGER, svcAtmFailedCallDiagnostic OCTET STRING, svcAtmFailedCallCreationTime TimeTicks, svcAtmFailedCallTerminationTime TimeTicks, svcAtmFailedCallFailureNodeId INTEGER, svcAtmFailedCallFailureIfIndex Index, svcAtmFailedCallCallingParty OCTET STRING, svcAtmFailedCallCalledParty OCTET STRING, svcAtmFailedCallAtmTfdType INTEGER, svcAtmFailedCallAtmTfdParam1 INTEGER, svcAtmFailedCallAtmTfdParam2 INTEGER, svcAtmFailedCallAtmTfdParam3 INTEGER, svcAtmFailedCallAtmQosClass INTEGER, svcAtmFailedCallAtmRTfdType INTEGER, svcAtmFailedCallAtmRTfdParam1 INTEGER, svcAtmFailedCallAtmRTfdParam2 INTEGER, svcAtmFailedCallAtmRTfdParam3 INTEGER, svcAtmFailedCallAtmRQoSClass INTEGER, svcAtmFailedCallBBearerClass INTEGER, svcAtmFailedCallBBearerTfcType INTEGER, svcAtmFailedCallBBearerTmgRqmt INTEGER, svcAtmFailedCallBBearerUplaneCfg INTEGER, svcAtmFailedCallBBearerClippingSusc INTEGER, svcAtmFailedCallAdminStatus INTEGER } svcAtmFailedCallIfIndex OBJECT-TYPE SYNTAX Index ACCESS read-only STATUS mandatory DESCRIPTION "The interface value of the corresponding MIB-II ifEntry for the port at which this call failure was declared." ::= { svcAtmFailedCallEntry 1 } svcAtmFailedCallIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The instance number for this failed call at this port." ::= { svcAtmFailedCallEntry 2 } svcAtmFailedCallDirection OBJECT-TYPE SYNTAX INTEGER { caller(1), callee(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The direction of the failed call." ::= { svcAtmFailedCallEntry 3 } svcAtmFailedCallPduType OBJECT-TYPE SYNTAX INTEGER { release(1), addPartyReject(2), dropParty(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The Pdu Type containing the cause IE." ::= { svcAtmFailedCallEntry 4 } svcAtmFailedCallPduDirection OBJECT-TYPE SYNTAX INTEGER { transmitted(1), received(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether the terminating PDU was transmitted or received on this port." ::= { svcAtmFailedCallEntry 5 } svcAtmFailedCallCause OBJECT-TYPE SYNTAX INTEGER { unalloc-nmb (1), -- unallocated (unassigned) number no-route-transnet (2), -- no route to transit network no-route-dest (3), -- no route to destination vcc-unacceptable-30 (10), -- UNI 3.0: VPCI/VCI unacceptable normal-call-clr-31 (16), -- UNI 3.1: normal call clearing user-busy (17), -- user busy no-user-response (18), -- no user response call-reject (21), -- call rejected nmb-changed (22), -- number changed call-reject-clir (23), -- user rejects all calls with CLIR dest-out-of-order (27), -- destination out of order invalid-nmb-format (28), -- invalid number format response-stat-enq (30), -- response to STATUS ENQUIRY normal-unspecified (31), -- normal unspecified req-vcc-unavailable (35), -- requested VPCI/VCI unavailable vcc-fail-31 (36), -- UNI 3.1: VPCI/VCI assignment failure rate-unavail-31 (37), -- UNI 3.1: user cell rate unavailable network-out-of-order (38), -- network out of order temp-fail (41), -- Temporary failure access-info-discard (43), -- access info discarded no-vcc-available (45), -- no VPCI/VCI unavailable resources-unavailable (47), -- resources unavailable, unspecified qos-unavailable (49), -- Quality of Service unavailable rate-unavailable-30 (51), -- UNI 3.0: user cell rate unavailable b-cap-not-authorized (57), -- bearer capability not authorized b-cap-unavailable (58), -- bearer capability not available service-unavailable (63), -- Service or option unavailable b-cap-not-implemented (65), -- bearer capability not implemented combination-unsupported (73), -- unsupported comb. of traffic parameters aal-params-unsupp-31 (78), -- UNI 3.1: AAL paramteres cannot be supported invalid-call-reference (81), -- invalid call reference no-channel (82), -- identified channel does not exist dest-incompatible (88), -- incompatible destination invalid-endpoint-ref (89), -- invalid endpoint reference invalid-transit-net (91), -- invalid transit network selection too-many-add-pty-req (92), -- too many add party requests aal-params-unsupp-30 (93), -- UNI 3.0:AAL paramteres cannot be supported info-element-missing (96), -- mandatory info element is missing msg-type-not-imp (97), -- message type not implemented info-element-not-imp (99), -- info element not implemented invalid-info-element (100), -- invalid info element message-not-compatible (101), -- msg type not compatible with call st timer-recovery (102), -- recovery on timer expiry invalid-message-len (104), -- incorrect message length protocol-error (111), -- protocol error, unspecified optional-element-error (127) -- opt info el content error (non-std) } ACCESS read-only STATUS mandatory DESCRIPTION "The failure cause contained in the cause IE." ::= { svcAtmFailedCallEntry 6 } svcAtmFailedCallLocation OBJECT-TYPE SYNTAX INTEGER { user (1), -- user privNetServLocal (2), -- private network serving local user pubNetServLocal (3), -- public network serving local user transitNet (4), -- transit network pubNetServRemote (5), -- public network serving remote user privNetServRemote (6), -- private network serving remote user intlNet (7), -- international network netBeyondInterwkPt (8) -- network beyond interworking point } ACCESS read-only STATUS mandatory DESCRIPTION "The failure location contained in the cause IE." ::= { svcAtmFailedCallEntry 7 } svcAtmFailedCallDiagnostic OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The diagnostic information contained in the cause IE." ::= { svcAtmFailedCallEntry 8 } svcAtmFailedCallCreationTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The sysUpTime when this call was initiated." ::= { svcAtmFailedCallEntry 9 } svcAtmFailedCallTerminationTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The sysUpTime when this call was terminated." ::= { svcAtmFailedCallEntry 10 } svcAtmFailedCallFailureNodeId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The node which caused the SVC failure." ::= { svcAtmFailedCallEntry 11 } svcAtmFailedCallFailureIfIndex OBJECT-TYPE SYNTAX Index ACCESS read-only STATUS mandatory DESCRIPTION "The port on the failure node which caused the SVC failure." ::= { svcAtmFailedCallEntry 12 } svcAtmFailedCallCallingParty OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The calling party number for this failed call, if present." ::= { svcAtmFailedCallEntry 13 } svcAtmFailedCallCalledParty OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The called party number for this failed call." ::= { svcAtmFailedCallEntry 14 } svcAtmFailedCallAtmTfdType OBJECT-TYPE SYNTAX INTEGER { pcr-0-01 (1), pcr-0-01-tag (2), pcr-01-scr-0-mbs-0 (3), pcr-01-scr-0-mbs-0-tag (4), pcr-01 (5), pcr-01-scr-01-mbs-01 (6), pcr-01-bestEffort (7), unknown (8) } ACCESS read-only STATUS mandatory DESCRIPTION "The combination of forward traffic parameters for this failed call." ::= { svcAtmFailedCallEntry 15 } svcAtmFailedCallAtmTfdParam1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Forward traffic descriptor parameter 1 for this failed call." ::= { svcAtmFailedCallEntry 16 } svcAtmFailedCallAtmTfdParam2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Forward traffic descriptor parameter 2 for this failed call." ::= { svcAtmFailedCallEntry 17 } svcAtmFailedCallAtmTfdParam3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Forward traffic descriptor parameter 3 for this failed call." ::= { svcAtmFailedCallEntry 18 } svcAtmFailedCallAtmQosClass OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Forward QOS class for this failed call." ::= { svcAtmFailedCallEntry 19 } svcAtmFailedCallAtmRTfdType OBJECT-TYPE SYNTAX INTEGER { pcr-0-01 (1), pcr-0-01-tag (2), pcr-01-scr-0-mbs-0 (3), pcr-01-scr-0-mbs-0-tag (4), pcr-01 (5), pcr-01-scr-01-mbs-01 (6), pcr-01-bestEffort (7), unknown (8) } ACCESS read-only STATUS mandatory DESCRIPTION "The combination of reverse traffic parameters for this failed call." ::= { svcAtmFailedCallEntry 20 } svcAtmFailedCallAtmRTfdParam1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reverse traffic descriptor parameter 1 for this failed call." ::= { svcAtmFailedCallEntry 21 } svcAtmFailedCallAtmRTfdParam2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reverse traffic descriptor parameter 2 for this failed call." ::= { svcAtmFailedCallEntry 22 } svcAtmFailedCallAtmRTfdParam3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reverse traffic descriptor parameter 3 for this failed call." ::= { svcAtmFailedCallEntry 23 } svcAtmFailedCallAtmRQoSClass OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reverse QOS class for this failed call." ::= { svcAtmFailedCallEntry 24 } svcAtmFailedCallBBearerClass OBJECT-TYPE SYNTAX INTEGER { class-A(1), class-C(3), class-X(16) } ACCESS read-only STATUS mandatory DESCRIPTION "Broadband bearer class for this failed call." ::= { svcAtmFailedCallEntry 25 } svcAtmFailedCallBBearerTfcType OBJECT-TYPE SYNTAX INTEGER { notIndicated(1), cbr(2), vbr(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Broadband bearer traffic type for this failed call." ::= { svcAtmFailedCallEntry 26 } svcAtmFailedCallBBearerTmgRqmt OBJECT-TYPE SYNTAX INTEGER { notIndicated(1), required(2), not-required(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Broadband bearer timing requirement for this failed call." ::= { svcAtmFailedCallEntry 27 } svcAtmFailedCallBBearerUplaneCfg OBJECT-TYPE SYNTAX INTEGER { point-point(1), point-multipoint(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Broadband bearer user plane configuration for this failed call." ::= { svcAtmFailedCallEntry 28 } svcAtmFailedCallBBearerClippingSusc OBJECT-TYPE SYNTAX INTEGER { not-susceptible(1), susceptible(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Broadband bearer clipping susceptability for this failed call." ::= { svcAtmFailedCallEntry 29 } svcAtmFailedCallAdminStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), -- entry is valid invalid (2) -- entry is invalid } ACCESS read-only STATUS mandatory DESCRIPTION "All entries are initially invalid. Due to the FIFO nature of this table, once N entries have been created, all entries will always be valid." ::= { svcAtmFailedCallEntry 30 } -- -- The Software Group -- -- The variables that describe the software running on a particular card. -- swTable OBJECT-TYPE SYNTAX SEQUENCE OF SwEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of swEntry's. The number of entries is given by the value of swCardNumber" ::= { software 1 } swEntry OBJECT-TYPE SYNTAX SwEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The software entry contains objects describing the software cards." INDEX { swLogicalSlotId, swRedundState } ::= { swTable 1 } SwEntry ::= SEQUENCE { swLogicalSlotId INTEGER, swRedundState INTEGER, swRevision DisplayString, swBuildID DisplayString, swBuildDate DisplayString, swBuildDescription DisplayString, swCopyrightNotice DisplayString, swCapabilityMask INTEGER, swFeatureMask INTEGER, swPatchMask INTEGER, swBuildUserId DisplayString, swBuildView DisplayString, swBuildConfigSpec DisplayString } swLogicalSlotId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The logical slot number of this card. This is used as an index for the swTable. In redundant configurations, this can be the physical slot number of either redundant card. In non redundant configurations, this is the same as cardPhysicalSlotId." ::= { swEntry 1} swRedundState OBJECT-TYPE SYNTAX INTEGER { active (1), standby (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current redundancy state of this card." ::= { swEntry 2 } swRevision OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The software revision number in the form (major.minor.maint.patch) where major == the major release number minor == the minor release number maint == a maintenance release based on major.minor patch == a patch release based on major.minor.maint" ::= { swEntry 3 } swBuildID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An identifier which uniquely identifies the software image within the scope of the release. The build ID is generated automatically through the build process and assigned to the software image during the final load generation." ::= { swEntry 4 } swBuildDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The date on which the software image was generated." ::= { swEntry 5 } swBuildDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A general description of the release." ::= { swEntry 6 } swCopyrightNotice OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Legalese describing the Copyrights covering this software image." ::= { swEntry 7 } swCapabilityMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A 32-bit integer which bitmaps optional or additional features supported by this software release. For use by the NMS in determining capabilities of the software. The significance of this bitmap varies by release. For Cascade internal use." ::= { swEntry 8 } swFeatureMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A 32-bit integer which bitmaps optional or additional features supported by this software release. For use by the NMS in determining capabilities of the software. The significance of this bitmap varies by release. For Cascade internal use." ::= { swEntry 9 } swPatchMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A 32-bit integer which bitmaps incremental patches which have been applied to the software release. The significance of this bitmap varies by release. For Cascade internal use." ::= { swEntry 10 } swBuildUserId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The user ID of the person responsible for generating the software image. For Cascade internal use." ::= { swEntry 11 } swBuildView OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Source control information for image generation. For Cascade internal use." ::= { swEntry 12 } swBuildConfigSpec OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Source control information for image generation. For Cascade internal use." ::= { swEntry 13 } -- The Traps Group -- -- Definitions for Cascade Frame Relay Specific Traps. -- nodeBoardInserted TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportType } DESCRIPTION "This trap indicates that a board has been inserted into the indicated slot." ::= 1 nodeBoardPulled TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportType } DESCRIPTION "This trap indicates that a board has been pulled out from the indicated slot." ::= 2 nodeBoardMismatch TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportType } DESCRIPTION "This trap indicates that the actual board type on the indicated slot is inconsistent with what is configured." ::= 3 nodePsAStatusChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodePsAStatus } DESCRIPTION "This trap indicates that the power supply A has changed state (toggled between up and down states)." ::= 4 nodePsBStatusChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodePsBStatus } DESCRIPTION "This trap indicates that the power supply B has changed state (toggled between up and down states)." ::= 5 nodeFanStatusChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodeFanIndex, nodeFanStatus } DESCRIPTION "This trap indicates that a fan has changed state (toggled between up and down states)." ::= 6 nodeSwDownloadComplete TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodeSwFilename } DESCRIPTION "This trap indicates that a software download was complete." ::= 7 nodeSwDownloadFailed TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodeSwFilename } DESCRIPTION "This trap indicates that a software download failed." ::= 8 nodePrDownloadComplete TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodePrFilename } DESCRIPTION "This trap indicates that a PRAM download was complete." ::= 9 nodePrDownloadFailed TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodePrFilename } DESCRIPTION "This trap indicates that a PRAM download failed." ::= 10 nodeTracefull TRAP-TYPE ENTERPRISE cascfr DESCRIPTION "This trap indicates that the node trace table was full and has been copied to a TFTP buffer awaiting to be xfered to the NMS." ::= 11 nodeDiagLogfull TRAP-TYPE ENTERPRISE cascfr DESCRIPTION "This trap indicates that the diagnostic log table was full and has been copied to a TFTP buffer awaiting to be xfered to the NMS." ::= 12 nodeFlashMemErr TRAP-TYPE ENTERPRISE cascfr DESCRIPTION "This trap indicates that a checksum or CRC-32 error occurred in Flash." ::= 13 nodePramErr TRAP-TYPE ENTERPRISE cascfr DESCRIPTION "This trap indicates that a checksum error or battery problem occurred in PRAM." ::= 14 nodeRamErr TRAP-TYPE ENTERPRISE cascfr DESCRIPTION "This trap indicates that an I/O error occurred in DRAM or SRAM." ::= 15 nodeInternalErr TRAP-TYPE ENTERPRISE cascfr DESCRIPTION "This trap indicates that a fatal internal hardware or software error encountered and system needs to be re-booted." ::= 16 pportStatusChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportId, pportOperStatus, pportLinkDownReason } DESCRIPTION "This trap indicates that the indicated physical port has changed state." ::= 17 lportCongests TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportCongestRate } DESCRIPTION "This trap indicates that the rate of entering severely and absolutely congested state on the indicated logical port has exceeded the threshold." ::= 18 trkStatusChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId, lportTrkStatus } DESCRIPTION "This trap indicates that the trunk associated with the indicated logical port has changed state." ::= 19 cktDlciStatusChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { cktSrcIfIndex, cktSrcDlci, cktOperStatus, cktFailReason, cktFailNode, cktFailPort } DESCRIPTION "This trap indicates that the user-to-user PVC state has been changed for this virtual circuit. It has either been created or invalidated, or has toggled between the active and inactive states." ::= 20 cktDlciReroute TRAP-TYPE ENTERPRISE cascfr VARIABLES { cktSrcIfIndex, cktSrcDlci } DESCRIPTION "This trap indicates that a PVC has been re-routed." ::= 21 pportInterfaceMismatch TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportId, pportAdminInterface, pportInterface } DESCRIPTION "This trap indicates the actual physical interface is different than the configured physical interface." ::= 22 lportErrorExceedThreshold TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, ifInErrors } DESCRIPTION "This trap indicates the frame errors per minute on this lport exceeded the threshold." ::= 23 nodeErrorReport TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodeDiagNonFatalSource, nodeDiagNonFatalTime, nodeDiagNonFatalErrMajor, nodeDiagNonFatalErrMinor, nodeDiagNonFatalStr } DESCRIPTION "A component in the switch discovered a non-fatal error condition." ::= 24 cktGrpStatusChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { cardCktGroupTrap } DESCRIPTION "Circuits on interfaces go up or down." ::= 25 nodeUserLogin TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodeConsoleIndex, nodeUserName, nodeUserFrom, nodeConsoleUptime } DESCRIPTION "An user has logged in STDX through either serial console or telnet." ::= 26 nodeUserLogout TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodeConsoleIndex, nodeUserName, nodeUserFrom, nodeConsoleUptime } DESCRIPTION "An user has logged out." ::= 27 cardUp TRAP-TYPE ENTERPRISE cascfr VARIABLES { cardPhysicalSlotId } DESCRIPTION "This trap indicates that an intelligent card has transitioned to an ACTIVE state." ::= 28 cardDown TRAP-TYPE ENTERPRISE cascfr VARIABLES { cardPhysicalSlotId } DESCRIPTION "This trap indicates that an intelligent card has transitioned to a NON-ACTIVE state." ::= 29 lnkStatusChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId, lportLinkStatus} DESCRIPTION "This trap indicates that the link status (Link protocol) associated with the indicated logical port has changed state." ::= 30 lnkSmdsHbpNaTca TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId } DESCRIPTION "This trap indicates that non-Ack count for SMDS DXI heartbeat poll exceedes the threshold. The non-Ack count is reset every 15 minutes." ::= 31 lnkSmdsDiscardTca TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId } DESCRIPTION "This trap indicates that Total Discard packet count for SMDS packet exceedes the threshold. ( This trap has not been implemented in this release yet )." ::= 32 cardRedundSwitchOver TRAP-TYPE ENTERPRISE cascfr VARIABLES { cardPhysicalSlotId } DESCRIPTION "This trap indicates that the card in the specified slot has shot its active partner and has become the active card of the pair." ::= 33 cardErrorReport TRAP-TYPE ENTERPRISE cascfr VARIABLES { cardDiagNonFatalSource, cardDiagNonFatalTime, cardDiagNonFatalErrMajor, cardDiagNonFatalErrMinor, cardDiagNonFatalStr, cardPhysicalSlotId } DESCRIPTION "The specified card discovered a non-fatal error condition." ::= 34 svcSetup TRAP-TYPE ENTERPRISE cascfr VARIABLES { cktSrcIfIndex, cktSrcDlci, cktSvcCallingParty, cktSvcCalledParty } DESCRIPTION "This trap is generated by the ingress switch whenever a Frame Relay Svc is setup or cleared. cktStatus indicates whether it is a setup or a clearing." ::= 35 svcClearing TRAP-TYPE ENTERPRISE cascfr DESCRIPTION "Reserved for Frame Relay SVC." ::= 36 svcFailure TRAP-TYPE ENTERPRISE cascfr VARIABLES { cktSvcCallingParty, cktSvcCalledParty, cktSvcCause } DESCRIPTION "This trap is generated by the ingress switch whenever a Frame Relay svc setup fails. cktSvcCause contains the cause number." ::= 37 trkBuAttempt TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId } DESCRIPTION "This trap indicates that an attempt to establish the backup trunk associated with the indicated logical port is being made." ::= 38 trkBuFailure TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId, lportBuFailReason } DESCRIPTION "This trap indicates that the primary trunk associated with the indicated logical port has not been backed up or the backup trunk associated with the indicated logical port has not been restored. The reason for failure is provided. The lportBuFailReason indicates the trunk type as follows: lportBuFailReson Trunk Type buTrkNotDef primary trunk buTrkNotEstab backup trunk" ::= 39 trkBuReleased TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId } DESCRIPTION "This trap indicates that the backup trunk associated with the indicated logical port has been released." ::= 40 pportDS0LoopUpChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportId, pportDS0LoopUpStatus } DESCRIPTION "This trap indicates one or more DS0's have gone into loopback.pportDS0LoopUpStatus reports the DS0's that have gone into loopback." ::= 41 pportDS0LoopDownChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportId, pportDS0LoopDownStatus } DESCRIPTION "This trap indicates one or more DS0's have gone out of loopback.pportDS0LoopDownStatus reports the DS0's that have gone out of loopback." ::= 42 lportISDNCallRej TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportISDNCallRejCause } DESCRIPTION "This trap indicates that a call has been rejected due either the inability to authenticate the call or lack of B-channel pool resources." ::= 43 pportdsx3LoopChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportId, pportdsx3LoopStatus } DESCRIPTION "This trap indicates when the DS3 or E3 has changed its current loopback state." ::= 44 pportds1LoopChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportId, pportds1LoopStatus } DESCRIPTION "This trap indicates when the DS1 has changed its current loopback state." ::= 45 pportExtClockBackup TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportId, pportSetClkBkup } DESCRIPTION "This trap indicates that a pport has lost the external clock source and is switching over to the backup clock selected." ::= 46 pportExtClockRestore TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportId } DESCRIPTION "This trap indicates that external clock is recovered and the pport will switch back to external clock." ::= 47 pportExtClkCapabilityMismatch TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportId } DESCRIPTION "This trap indicates the port on this card (and the card itself) is not capable of running external clock." ::= 48 nodeFileTransferReport TRAP-TYPE ENTERPRISE cascade VARIABLES { nodeFileTransferRequest, nodeFileTransferStatus } DESCRIPTION "Reporting the outcome of a previous file transfer request. nodeFileTransferRequest specifies the request and nodeFileTransferStatus gives the outcome." ::= 49 nodeBillingUsageRecOvflWarning TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodeBillingService } DESCRIPTION "Warning that a usage record counter-value overflow condition has occurred while aggregating usage data recently collected from one or more IOPs. An overflow condition exists when an attempt was made to update a usage record counter, but such an update would have overflowed the counter. In this case, the usage record is closed and a new one is opened, if there is sufficient space in the service's aggregated usage data store. " ::= 50 nodeBillingUsageRecCrFailed TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodeBillingService } DESCRIPTION "Notification that a usage record could not be created." ::= 51 nodeBillingStateChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodeBillingService, nodeBilling } DESCRIPTION "Notification that billing has been enabled or disabled on the switch. This trap is generated at switch boot or when the value of the nodeBilling object is modified." ::= 52 lportBillingStateChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodeBillingService, lportBilling, lportIfIndex, lportSlotId, lportPportId, lportId } DESCRIPTION "Notification that billing has been enabled or disabled on a particular logical port. This trap is generated the value of the lportBilling is modified for a particular port; this trap IS NOT generated when the global nodeBilling is modified or when at switch boot." ::= 53 nodeBillingSwAPCommsFailure TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodeBillingAPAddress } DESCRIPTION " Notification that switch to Adjunct Processor communication has failed and that a usage file transfer has failed to complete. " ::= 54 svcAtmFailedCall TRAP-TYPE ENTERPRISE cascsvc VARIABLES { svcAtmFailedCallIfIndex, svcAtmFailedCallIndex } DESCRIPTION "Notification that one or more SVC call failures have been logged in the svcAtmFailedCallTable." ::= 55 svcAtmSigStatusChange TRAP-TYPE ENTERPRISE cascsvc VARIABLES { svcAtmConfigIfIndex, svcAtmConfigOperStatus } DESCRIPTION "Notification that the status of the ATM signalling function has changed on the port." ::= 56 lportCBRLineDataError TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId, lportStarvation, lportRecOverflow, lportLossOfCellSequence, lportLossOfStructurePointer } DESCRIPTION "This trap indicates the error state of the CBR lport." ::= 57 clkSourceSwitch TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportId, pportCbrCurrentClockMode } DESCRIPTION "This trap indicates that the CBR port switched its clock method." ::= 58 clkSourceFailure TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportId, nodeRefclockActiveSrc } DESCRIPTION "This trap indicates that the clock generation unit switched between holdover mode and synchronization to reference clock." ::= 59 lportSmdsSip3SaNotFoundTca TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId } DESCRIPTION "This trap indicates that the number of Sa Not Found violations exceeded the specified Smds pdu violation threshold for the logical port. " ::= 60 lportSmdsSip3SaDaOnSamePortTca TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId } DESCRIPTION "This trap indicates that the number of Sa Da On Same Port violations exceeded the specified Smds pdu violation threshold for the logical port. " ::= 61 lportSmdsSip3DstGaNotFoundTca TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId } DESCRIPTION "This trap indicates that the number of Dst Ga Not Found violations exceeded the specified Smds pdu violation threshold for the logical port. " ::= 62 lportSmdsSip3DstIaScrnFailTca TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId } DESCRIPTION "This trap indicates that the number of Dst Ia Scrn Fail violations exceeded the specified Smds pdu violation threshold for the logical port. " ::= 63 lportSmdsSip3SaValFailTca TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId } DESCRIPTION "This trap indicates that the number of Sa Val Fail violations exceeded the specified Smds pdu violation threshold for the logical port. " ::= 64 lportSmdsSip3DstIaNotFoundTca TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId } DESCRIPTION "This trap indicates that the number of Dst Ia Not Found violations exceeded the specified Smds pdu violation threshold for the logical port. " ::= 65 lportSmdsSip3SrcIaScrnFailTca TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId } DESCRIPTION "This trap indicates that the number of Src Ia Scrn Fail violations exceeded the specified Smds pdu violation threshold for the logical port. " ::= 66 lportSmdsSip3DstGaScrnFailTca TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId } DESCRIPTION "This trap indicates that the number of Dst Ga Scrn Fail violations exceeded the specified Smds pdu violation threshold for the logical port. " ::= 67 lportSmdsDxi2LinkIdInvalidTca TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportSlotId, lportPportId, lportId } DESCRIPTION "This trap indicates that the number of Link Id Invalid violations exceeded the specified Smds pdu violation threshold for the logical port. " ::= 68 nodePrimarySyncReferenceChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodePrimarySyncRefOperationalState } DESCRIPTION "Notification that the Primary Synchronization Reference operational state has changed." ::= 69 nodeSecondarySyncReferenceChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodeSecondarySyncRefOperationalState } DESCRIPTION "Notification that the Secondary Synchronization Reference operational state has changed." ::= 70 nodeExternalClockAChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodeExternalClockAOperationalState } DESCRIPTION "Notification that the External Reference Clock A operational state has changed." ::= 71 nodeExternalClockBChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodeExternalClockBOperationalState } DESCRIPTION "Notification that the External Reference Clock B operational state has changed." ::= 72 nodePortReferenceAChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodePortClockAOperationalState } DESCRIPTION "Notification that the Port Reference Clock A operational state has changed." ::= 73 nodePortReferenceBChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { nodePortClockBOperationalState } DESCRIPTION "Notification that the Port Reference Clock B operational state has changed." ::= 74 pportDS0InitiateLpbkFailure TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportId, pportDS0FarendDS0InLpbk } DESCRIPTION "This trap indicates that the DS0 requested to be set into far end loopback has failed to do so." ::= 75 pportDS0InitiateLpbkSuccess TRAP-TYPE ENTERPRISE cascfr VARIABLES { pportSlotId, pportId, pportDS0FarendDS0InLpbk } DESCRIPTION "This trap indicates that the DS0 requested to be set into far end loopback has succeeded." ::= 76 lportISDNIpAddrRej TRAP-TYPE ENTERPRISE cascfr VARIABLES { lportIfIndex, lportISDNIpAddrAssignFail } DESCRIPTION "This trap indicates that an Ip Address assignment failed." ::= 77 cktAtmStatusChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { cktSrcIfIndex, cktAtmVPI, cktAtmVCI, cktOperStatus, cktFailReason, cktFailNode, cktFailPort } DESCRIPTION "This trap indicates that the user-to-user ATM PVC state has been changed for this virtual circuit. It has either been created or invalidated, or has toggled between the active and inactive states." ::= 78 cktAtmReroute TRAP-TYPE ENTERPRISE cascfr VARIABLES { cktSrcIfIndex, cktAtmVPI, cktAtmVCI } DESCRIPTION "This trap indicates that an ATM PVC has been re-routed." ::= 79 cardTransmitClockStatusChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { cardPhysicalSlotId, cardTransmitClockStatus } DESCRIPTION "This trap indicates the IOM transmit clock synchronization status has chnaged." ::= 80 cardSystemPrimaryClockStatusChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { cardPhysicalSlotId, cardSystemPrimaryClockStatus } DESCRIPTION "This trap indicates that the IOM system primary clock reference status has changed." ::= 81 cardSystemSecondaryClockStatusChange TRAP-TYPE ENTERPRISE cascfr VARIABLES { cardPhysicalSlotId, cardSystemSecondaryClockStatus } DESCRIPTION "This trap indicates that the IOM system primary clock reference status has changed." ::= 82 END