-- ============================================================================
-- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
--
-- Description: The purpose of this MIB file is to provide the definition of
--              the ARP Rate Limit general configuration.
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 2009-12-08
--   Initial version, created by gejianzhuang
-- ============================================================================
HPN-ICF-ARP-RATELIMIT-MIB DEFINITIONS ::= BEGIN

IMPORTS
        hpnicfCommon
    FROM HPN-ICF-OID-MIB
        Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
    FROM SNMPv2-SMI;

hpnicfARPRatelimit MODULE-IDENTITY
    LAST-UPDATED "200912081912Z"        -- DEC 08, 2009 at 19:12 GMT
    ORGANIZATION
        ""
    CONTACT-INFO
        ""
    DESCRIPTION
        "This MIB file defines the ARP packet rate limit configuration.
        The ARP packet rate limit feature monitors and controls the
        rate of ARP packets delivered to the CPU on a device.  The
        current version supports the monitoring feature only."
    REVISION "200912081912Z"
    DESCRIPTION
        "The initial version of this MIB file."
    ::= { hpnicfCommon 110 }


hpnicfARPRatelimitObjects OBJECT IDENTIFIER ::= { hpnicfARPRatelimit 1 }

hpnicfARPRatelimitTrap OBJECT IDENTIFIER  ::= { hpnicfARPRatelimitObjects 1 }

-- hpnicfARPRatelimitTraps

hpnicfARPRatelimitTraps OBJECT IDENTIFIER ::= { hpnicfARPRatelimitTrap 0 }

hpnicfARPRatelimitOverspeedTrap NOTIFICATION-TYPE
    OBJECTS
        {
            hpnicfARPRatelimitTrapVer,
            hpnicfARPRatelimitTrapCount,
            hpnicfARPRatelimitTrapMsg
        }
    STATUS      current
    DESCRIPTION
        "If the rate of ARP packets delivered to the CPU on a device
        exceeds the threshold, a trap message is generated and sent
        to the remote monitoring device."
    ::= { hpnicfARPRatelimitTraps 1 }

hpnicfARPRatelimitTrapObjects OBJECT IDENTIFIER  ::= { hpnicfARPRatelimitTrap 1 }

hpnicfARPRatelimitTrapVer OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The version of trap information."
    ::= { hpnicfARPRatelimitTrapObjects 1 }

hpnicfARPRatelimitTrapCount OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Number of cells in the trap message.  A trap message may contain
        multiple cells, each of which indicates that the rate information of
        ARP packets exceeds the threshold."
    ::= { hpnicfARPRatelimitTrapObjects 2 }

hpnicfARPRatelimitTrapMsg OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(1..254))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This object is the cell section in a trap message sent from a
        monitored device.  This object can contain multiple cells.
        This object is in the format of '<cell1><cell2>...'.  Each cell
        consists of 17 octets in the format of
        '<TrapOrigin><IfIndex><OverSpeedValue><Threshold><Interval>'.

        <TrapOrigin> indicates the source of the trap message and has
        size of 1 octet.  It only supports the following values.
        1 - Global.
        2 - Interface.

        <IfIndex> is the index of the interface where the rate of ARP packet
        exceeds the threshold and has size of 4 octets.  It is 0xFFFFFFFF
        when <TrapOrigin> is 1(Global).

        <OverSpeedValue> indicates the rate that ARP packets are actually
        delivered and has size of 4 octets.

        <Threshold> indicates the threshold that ARP packets can be delivered
        to CPU and has size of 4 octets.

        <Interval> indicates the interval that a trap message is sent out
        and has size of 4 octets."

    ::= { hpnicfARPRatelimitTrapObjects 3 }
END