ETSI (European Telecommunications Standards Institute)
View at oid-info.com
The rules for assigning values in this domain are:
1. An identifier in the common domain (arcs 0 to 126) is available for use only under the following rule: that the domain consists of definitions used in two or more ETSI deliverables. Names and values shall be allocated and registered by the ETSI Secretariat. Since only 126 values are available, domains should be used only if the commonalty of such a domain justifies this. The granting of a domain value shall be upon the recommendation of the relevant Technical Body.
NOTE: The rules for using the common domain are interim. These rules need to be rediscussed and agreed after the first 50 values have been allocated. New allocation rules need also to provide a justification that can be used in the formulation of subsequent rules.
The rules for assigning object identifiers are defined in EG 200 351 downloadable from http://portal.etsi.org (i.e., for an OID local to a specific deliverable, the value below "etsi(0)" should be the last five digits of the number of the publication, ignoring any part number. Thus object identifiers local to, say, EG 201 097-1 would be of the form {itu-t(0) identified-organization(4) etsi(0) name(1097)}.
2. The ETSI-deliverable-based domain (arcs 128 upwards) is the most commonly used form of OIDs in ETSI.
The OID tree value for a given ETSI deliverable is derived by deleting the first digit of its document number (and omitting leading zeros).
EXAMPLE 1: The allocated value for ETS 300 182 is "0 4 0 182".
EXAMPLE 2: The allocated value for TS 201 123 and ES 201 123 is "0 4 0 1123". The assignment of document numbers is independent of ETSI deliverable type. Technically, TS 101 123 and ES 201 123 are just two different versions of the same document.
See the expandable list of OIDs. To get the formal definition of OIDs, see the document cited on the right. The tree is not necessarily complete; further extensions may be included in the referenced document.
This table is presented for information only. The formal definitions of the object identifiers are contained in the referenced documents. At present, only the object identifiers assigned under the ETSI arc are listed.
ETSI also owns OID {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) etsi(13019)}.
Address: The European Telecommunications Standards Institute (ETSI)
650, route des Lucioles
06921 Sophia Antipolis, FRANCE
Note: John M. Meredith is responsible for object identifiers within the 3GPP field, and within the ETSI field only insofar as they are relevant to 3GPP.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 0.4.0.0 | mobileDomain | 8 | 910 | Mobile domain |
| 0.4.0.1 | inDomain | 6 | 117 | Intelligent Network (IN) domain |
| 0.4.0.2 | etsi-library | 4 | 416 | ETSI library. Also ASN.1 module named SecurityDomainDefinitions defined in ETSI TS 101 671 |
| 0.4.0.3 | service-function | 0 | 0 | Service functions |
| 0.4.0.4 | branDomain | 4 | 5 | ETSI Broadband Radio Access Networks (BRAN) domain |
| 0.4.0.5 | itsDomain | 5 | 16 | Intelligent Transport Systems (ITS) |
| 0.4.0.127 | reserved | 1 | 21 | Reserved domain |
| 0.4.0.128 | deliverable-domain | 0 | 0 | ETSI deliverable domain |
| 0.4.0.182 | 182 | 1 | 1 | ETS 300 182 |
| 0.4.0.196 | 196 | 2 | 2 | EN 300 196 "Integrated Services Digital Network (ISDN) - Generic functional protocol for the support of supplementary services … |
| 0.4.0.369 | 369 | 2 | 3 | EN 300 369 "Integrated Services Digital Network (ISDN) -- Explicit Call Transfer (ECT) supplementary service -- Digital Subscri… |
| 0.4.0.819 | usageMeteringInformationManagement | 1 | 117 | Interim European Telecommunication Standard (I-ETS) 300 819 "Functional Specification of usage metering information management … |
| 0.4.0.1040 | en301040 | 1 | 1 | EN 301 040 |
| 0.4.0.1296 | 1296 | 3 | 3 | ES 201 296: "Integrated Services Digital Network (ISDN) -- Signalling System No. 7 -- ISdn User Part (ISUP) -- Signalling aspec… |
| 0.4.0.1456 | qualified-certificate-policies | 1 | 3 | Qualified certificate policies |
| 0.4.0.1733 | electronic-signature-standard | 2 | 9 | Electronic signature standard |
| 0.4.0.1862 | qc-profile | 2 | 7 | Qualified certificate profile |
| 0.4.0.1909 | ts101909 | 1 | 5 | ETSI TS 101 909 "Digital Broadband Cable Access to the Public Telecommunications Network; Internet Protocol (IP) Multimedia Tim… |
| 0.4.0.2023 | time-stamp-policy | 0 | 0 | Baseline time-stamp policy |
| 0.4.0.2042 | other-certificate-policies | 1 | 6 | Other certificate policies |
| 0.4.0.2231 | tsl-specification | 6 | 22 | ETSI TS 102 231: "Electronic Signatures and Infrastructures (ESI); Provision of harmonized Trust-service status information" |
| 0.4.0.194112 | qualified-certificate-policies | 1 | 6 | ETSI EN 319 411-2 "Electronic Signatures and Infrastructures (ESI); Policy and security requirements for Trust Service Provider… |
| 0.4.0.194121 | id-cert-profile | 2 | 5 | ETSI EN 319 412-1 "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 1: Overview and common data stru… |
| 0.4.0.194125 | id-qc-statements | 1 | 2 | ETSI EN 319 412-5 "Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 5: QCStatements" |