Reference record for OID 1.0.8802.1.1.2.1.1.4


parent
1.0.8802.1.1.2.1.1 (lldpConfiguration)
node code
4
node name
lldpTxDelay
dot oid
1.0.8802.1.1.2.1.1.4
type
OBJECT-TYPE
asn1 oid
  • {iso(1) standard(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) ieee8021lldp(2) lldpObjects(1) lldpConfiguration(1) lldpTxDelay(4)}
  • {iso(1) standard(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) lldpMIB(2) lldpObjects(1) lldpConfiguration(1) lldpTxDelay(4)}
  • {iso(1) std(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) ieee8021lldp(2) lldpObjects(1) lldpConfiguration(1) lldpTxDelay(4)}
  • {iso(1) std(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) lldpMIB(2) lldpObjects(1) lldpConfiguration(1) lldpTxDelay(4)}
    • iri oid
  • /iso/standard/iso8802/ieee802dot1/ieee802dot1mibs/ieee8021lldp/lldpObjects/lldpConfiguration/lldpTxDelay
  • /iso/standard/iso8802/ieee802dot1/ieee802dot1mibs/lldpMIB/lldpObjects/lldpConfiguration/lldpTxDelay
  • /iso/std/iso8802/ieee802dot1/ieee802dot1mibs/ieee8021lldp/lldpObjects/lldpConfiguration/lldpTxDelay
  • /iso/std/iso8802/ieee802dot1/ieee802dot1mibs/lldpMIB/lldpObjects/lldpConfiguration/lldpTxDelay
    • iri by oid_info
    /ISO/Standard/8802/1/1/2/1/1/4

    Description by cisco_v1

    The lldpTxDelay indicates the delay (in units
    of seconds) between successive LLDP frame transmissions
    initiated by value/status changes in the LLDP local systems
    MIB. The recommended value for the lldpTxDelay is set by the
    following formula:

    1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)

    The default value for lldpTxDelay object is two seconds.

    The value of this object must be restored from non-volatile
    storage after a re-initialization of the management system.

    Description by cisco

    The lldpTxDelay indicates the delay (in units
    of seconds) between successive LLDP frame transmissions
    initiated by value/status changes in the LLDP local systems
    MIB. The recommended value for the lldpTxDelay is set by the
    following formula:

    1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)

    The default value for lldpTxDelay object is two seconds.

    The value of this object must be restored from non-volatile
    storage after a re-initialization of the management system.

    Description by ieee802

    The lldpTxDelay indicates the delay (in units
    of seconds) between successive LLDP frame transmissions
    initiated by value/status changes in the LLDP local systems
    MIB. The recommended value for the lldpTxDelay is set by the
    following formula:

    1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)

    The default value for lldpTxDelay object is two seconds.

    The value of this object must be restored from non-volatile
    storage after a re-initialization of the management system.

    Description by mibdepot

    The lldpTxDelay indicates the delay (in units
    of seconds) between successive LLDP frame transmissions
    initiated by value/status changes in the LLDP local systems
    MIB. The recommended value for the lldpTxDelay is set by the
    following formula:

    1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)

    The default value for lldpTxDelay object is two seconds.

    The value of this object must be restored from non-volatile
    storage after a re-initialization of the management system.

    Parsed from file LLDP-MIB.txt
    Company: None
    Module: LLDP-MIB

    Description by circitor

    The lldpTxDelay indicates the delay (in units
    of seconds) between successive LLDP frame transmissions
    initiated by value/status changes in the LLDP local systems
    MIB. The recommended value for the lldpTxDelay is set by the
    following formula:

    1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)

    The default value for lldpTxDelay object is two seconds.

    The value of this object must be restored from non-volatile
    storage after a re-initialization of the management system.

    Parsed from file LLDP-MIB.mib
    Module: LLDP-MIB

    Information by cisco_v1

    lldpTxDelay OBJECT-TYPE
    SYNTAX INTEGER(1..8192)


    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The lldpTxDelay indicates the delay (in units
        of seconds) between successive LLDP frame transmissions 
        initiated by value/status changes in the LLDP local systems
        MIB.  The recommended value for the lldpTxDelay is set by the
        following  formula:
        
           1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)
        
        The default value for lldpTxDelay object is two seconds.
        
        The value of this object must be restored from non-volatile
        storage after a re-initialization of the management system."
    REFERENCE
        "IEEE 802.1AB-2005 10.5.3.3"
    DEFVAL { 2 }
    ::= { lldpConfiguration 4 }

    Information by oid_info

    Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.

    Information by cisco

    lldpTxDelay OBJECT-TYPE
    SYNTAX          Integer32 (1..8192 )
    UNITS           "seconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The lldpTxDelay indicates the delay (in units
        of seconds) between successive LLDP frame transmissions 
        initiated by value/status changes in the LLDP local systems
        MIB.  The recommended value for the lldpTxDelay is set by the
        following  formula:

           1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)

        The default value for lldpTxDelay object is two seconds.

        The value of this object must be restored from non-volatile
        storage after a re-initialization of the management system."
    REFERENCE       "IEEE 802.1AB-2005 10.5.3.3"
    DEFVAL          { 2 } 
    ::= { lldpConfiguration 4 }

    Information by ieee802

    lldpTxDelay OBJECT-TYPE
    SYNTAX      Integer32(1..8192)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The lldpTxDelay indicates the delay (in units
            of seconds) between successive LLDP frame transmissions 
            initiated by value/status changes in the LLDP local systems
            MIB.  The recommended value for the lldpTxDelay is set by the
            following  formula:

               1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)

            The default value for lldpTxDelay object is two seconds.

            The value of this object must be restored from non-volatile
            storage after a re-initialization of the management system."
    REFERENCE 
            "IEEE 802.1AB-2005 10.5.3.3"
    DEFVAL      { 2 }    
    ::= { lldpConfiguration 4 }

    Information by mibdepot

    lldpTxDelay OBJECT-TYPE
    SYNTAX      Integer32(1..8192)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The lldpTxDelay indicates the delay (in units
            of seconds) between successive LLDP frame transmissions 
            initiated by value/status changes in the LLDP local systems
            MIB.  The recommended value for the lldpTxDelay is set by the
            following  formula:

               1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)

            The default value for lldpTxDelay object is two seconds.

            The value of this object must be restored from non-volatile
            storage after a re-initialization of the management system."
    REFERENCE 
            "IEEE 802.1AB-2005 10.5.3.3"
    DEFVAL      { 2 }    
    ::= { lldpConfiguration 4 }

    Information by circitor

    lldpTxDelay OBJECT-TYPE
    SYNTAX      Integer32(1..8192)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The lldpTxDelay indicates the delay (in units
            of seconds) between successive LLDP frame transmissions 
            initiated by value/status changes in the LLDP local systems
            MIB.  The recommended value for the lldpTxDelay is set by the
            following  formula:

               1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)

            The default value for lldpTxDelay object is two seconds.

            The value of this object must be restored from non-volatile
            storage after a re-initialization of the management system."
    REFERENCE 
            "IEEE 802.1AB-2004 10.5.3.3"
    DEFVAL      { 2 }    
    ::= { lldpConfiguration 4 }

    Current Registration Authority (recovered by parent 1.0)

    ISO and IEC

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.0.8802.1.1.2.1.1.4.0 lldpTxDelay 0 0 None

    Brothers (6)

    OIDNameSub childrenSub Nodes TotalDescription
    1.0.8802.1.1.2.1.1.1 lldpMessageTxInterval 1 1 The interval at which LLDP frames are transmitted on
    behalf of this LLDP agent.

    The default value for lldpMessageTxInterval objec…
    1.0.8802.1.1.2.1.1.2 lldpMessageTxHoldMultiplier 1 1 The time-to-live value expressed as a multiple of the
    lldpMessageTxInterval object. The actual time-to-live value
    used in LLDP f…
    1.0.8802.1.1.2.1.1.3 lldpReinitDelay 1 1 The lldpReinitDelay indicates the delay (in units of
    seconds) from when lldpPortConfigAdminStatus object of a
    particular port bec…
    1.0.8802.1.1.2.1.1.5 lldpNotificationInterval 1 1 This object controls the transmission of LLDP notifications.

    the agent must not generate more than one lldpRemTablesChange
    notifi…
    1.0.8802.1.1.2.1.1.6 lldpPortConfigTable 1 5 The table that controls LLDP frame transmission on individual
    ports.
    1.0.8802.1.1.2.1.1.7 lldpConfigManAddrTable 1 2 The table that controls selection of LLDP management address
    TLV instances to be transmitted on individual ports.