Reference record for OID 1.0.8802.1.1.2.1.1.6.1.4


parent
1.0.8802.1.1.2.1.1.6.1 (lldpPortConfigEntry)
node code
4
node name
lldpPortConfigTLVsTxEnable
dot oid
1.0.8802.1.1.2.1.1.6.1.4
type
OBJECT-TYPE
asn1 oid
  • {iso(1) standard(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) ieee8021lldp(2) lldpObjects(1) lldpConfiguration(1) lldpPortConfigTable(6) lldpPortConfigEntry(1) lldpPortConfigTLVsTxEnable(4)}
  • {iso(1) standard(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) lldpMIB(2) lldpObjects(1) lldpConfiguration(1) lldpPortConfigTable(6) lldpPortConfigEntry(1) lldpPortConfigTLVsTxEnable(4)}
  • {iso(1) std(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) ieee8021lldp(2) lldpObjects(1) lldpConfiguration(1) lldpPortConfigTable(6) lldpPortConfigEntry(1) lldpPortConfigTLVsTxEnable(4)}
  • {iso(1) std(0) iso8802(8802) ieee802dot1(1) ieee802dot1mibs(1) lldpMIB(2) lldpObjects(1) lldpConfiguration(1) lldpPortConfigTable(6) lldpPortConfigEntry(1) lldpPortConfigTLVsTxEnable(4)}
    • iri oid
  • /iso/standard/iso8802/ieee802dot1/ieee802dot1mibs/ieee8021lldp/lldpObjects/lldpConfiguration/lldpPortConfigTable/lldpPortConfigEntry/lldpPortConfigTLVsTxEnable
  • /iso/standard/iso8802/ieee802dot1/ieee802dot1mibs/lldpMIB/lldpObjects/lldpConfiguration/lldpPortConfigTable/lldpPortConfigEntry/lldpPortConfigTLVsTxEnable
  • /iso/std/iso8802/ieee802dot1/ieee802dot1mibs/ieee8021lldp/lldpObjects/lldpConfiguration/lldpPortConfigTable/lldpPortConfigEntry/lldpPortConfigTLVsTxEnable
  • /iso/std/iso8802/ieee802dot1/ieee802dot1mibs/lldpMIB/lldpObjects/lldpConfiguration/lldpPortConfigTable/lldpPortConfigEntry/lldpPortConfigTLVsTxEnable
    • iri by oid_info
    /ISO/Standard/8802/1/1/2/1/1/6/1/4

    Description by cisco_v1

    The lldpPortConfigTLVsTxEnable, defined as a bitmap,
    includes the basic set of LLDP TLVs whose transmission is
    allowed on the local LLDP agent by the network management.
    Each bit in the bitmap corresponds to a TLV type associated
    with a specific optional TLV.

    It should be noted that the organizationally-specific TLVs
    are excluded from the lldpTLVsTxEnable bitmap.

    LLDP Organization Specific Information Extension MIBs should
    have similar configuration object to control transmission
    of their organizationally defined TLVs.

    The bit 'portDesc(0)' indicates that LLDP agent should
    transmit 'Port Description TLV'.

    The bit 'sysName(1)' indicates that LLDP agent should transmit
    'System Name TLV'.

    The bit 'sysDesc(2)' indicates that LLDP agent should transmit
    'System Description TLV'.

    The bit 'sysCap(3)' indicates that LLDP agent should transmit
    'System Capabilities TLV'.

    There is no bit reserved for the management address TLV type
    since transmission of management address TLVs are controlled
    by another object, lldpConfigManAddrTable.

    The default value for lldpPortConfigTLVsTxEnable object is
    empty set, which means no enumerated values are set.

    The value of this object must be restored from non-volatile
    storage after a re-initialization of the management system.

    Description by cisco

    The lldpPortConfigTLVsTxEnable, defined as a bitmap,
    includes the basic set of LLDP TLVs whose transmission is
    allowed on the local LLDP agent by the network management.
    Each bit in the bitmap corresponds to a TLV type associated
    with a specific optional TLV.

    It should be noted that the organizationally-specific TLVs
    are excluded from the lldpTLVsTxEnable bitmap.

    LLDP Organization Specific Information Extension MIBs should
    have similar configuration object to control transmission
    of their organizationally defined TLVs.

    The bit 'portDesc(0)' indicates that LLDP agent should
    transmit 'Port Description TLV'.

    The bit 'sysName(1)' indicates that LLDP agent should transmit
    'System Name TLV'.

    The bit 'sysDesc(2)' indicates that LLDP agent should transmit
    'System Description TLV'.

    The bit 'sysCap(3)' indicates that LLDP agent should transmit
    'System Capabilities TLV'.

    There is no bit reserved for the management address TLV type
    since transmission of management address TLVs are controlled
    by another object, lldpConfigManAddrTable.

    The default value for lldpPortConfigTLVsTxEnable object is
    empty set, which means no enumerated values are set.

    The value of this object must be restored from non-volatile
    storage after a re-initialization of the management system.

    Description by ieee802

    The lldpPortConfigTLVsTxEnable, defined as a bitmap,
    includes the basic set of LLDP TLVs whose transmission is
    allowed on the local LLDP agent by the network management.
    Each bit in the bitmap corresponds to a TLV type associated
    with a specific optional TLV.

    It should be noted that the organizationally-specific TLVs
    are excluded from the lldpTLVsTxEnable bitmap.

    LLDP Organization Specific Information Extension MIBs should
    have similar configuration object to control transmission
    of their organizationally defined TLVs.

    The bit 'portDesc(0)' indicates that LLDP agent should
    transmit 'Port Description TLV'.

    The bit 'sysName(1)' indicates that LLDP agent should transmit
    'System Name TLV'.

    The bit 'sysDesc(2)' indicates that LLDP agent should transmit
    'System Description TLV'.

    The bit 'sysCap(3)' indicates that LLDP agent should transmit
    'System Capabilities TLV'.

    There is no bit reserved for the management address TLV type
    since transmission of management address TLVs are controlled
    by another object, lldpConfigManAddrTable.

    The default value for lldpPortConfigTLVsTxEnable object is
    empty set, which means no enumerated values are set.

    The value of this object must be restored from non-volatile
    storage after a re-initialization of the management system.

    Description by mibdepot

    The lldpPortConfigTLVsTxEnable, defined as a bitmap,
    includes the basic set of LLDP TLVs whose transmission is
    allowed on the local LLDP agent by the network management.
    Each bit in the bitmap corresponds to a TLV type associated
    with a specific optional TLV.

    It should be noted that the organizationally-specific TLVs
    are excluded from the lldpTLVsTxEnable bitmap.

    LLDP Organization Specific Information Extension MIBs should
    have similar configuration object to control transmission
    of their organizationally defined TLVs.

    The bit 'portDesc(0)' indicates that LLDP agent should
    transmit 'Port Description TLV'.

    The bit 'sysName(1)' indicates that LLDP agent should transmit
    'System Name TLV'.

    The bit 'sysDesc(2)' indicates that LLDP agent should transmit
    'System Description TLV'.

    The bit 'sysCap(3)' indicates that LLDP agent should transmit
    'System Capabilities TLV'.

    There is no bit reserved for the management address TLV type
    since transmission of management address TLVs are controlled
    by another object, lldpConfigManAddrTable.

    The default value for lldpPortConfigTLVsTxEnable object is
    empty set, which means no enumerated values are set.

    The value of this object must be restored from non-volatile
    storage after a re-initialization of the management system.

    Parsed from file LLDP-MIB.txt
    Company: None
    Module: LLDP-MIB

    Description by circitor

    The lldpPortConfigTLVsTxEnable, defined as a bitmap,
    includes the basic set of LLDP TLVs whose transmission is
    allowed on the local LLDP agent by the network management.
    Each bit in the bitmap corresponds to a TLV type associated
    with a specific optional TLV.

    It should be noted that the organizationally-specific TLVs
    are excluded from the lldpTLVsTxEnable bitmap.

    LLDP Organization Specific Information Extension MIBs should
    have similar configuration object to control transmission
    of their organizationally defined TLVs.

    The bit 'portDesc(0)' indicates that LLDP agent should
    transmit 'Port Description TLV'.

    The bit 'sysName(1)' indicates that LLDP agent should transmit
    'System Name TLV'.

    The bit 'sysDesc(2)' indicates that LLDP agent should transmit
    'System Description TLV'.

    The bit 'sysCap(3)' indicates that LLDP agent should transmit
    'System Capabilities TLV'.

    There is no bit reserved for the management address TLV type
    since transmission of management address TLVs are controlled
    by another object, lldpConfigManAddrTable.

    The default value for lldpPortConfigTLVsTxEnable object is
    empty set, which means no enumerated values are set.

    The value of this object must be restored from non-volatile
    storage after a re-initialization of the management system.

    Parsed from file LLDP-MIB.mib
    Module: LLDP-MIB

    Information by cisco_v1

    lldpPortConfigTLVsTxEnable OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(1..2))
        
        
        
        
        
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The lldpPortConfigTLVsTxEnable, defined as a bitmap,
        includes the basic set of LLDP TLVs whose transmission is
        allowed on the local LLDP agent by the network management.
        Each bit in the bitmap corresponds to a TLV type associated
        with a specific optional TLV.
        
        It should be noted that the organizationally-specific TLVs
        are excluded from the lldpTLVsTxEnable bitmap.
        
        LLDP Organization Specific Information Extension MIBs should
        have similar configuration object to control transmission
        of their organizationally defined TLVs.
        
        The bit 'portDesc(0)' indicates that LLDP agent should
        transmit 'Port Description TLV'.
        
        The bit 'sysName(1)' indicates that LLDP agent should transmit
        'System Name TLV'.
        
        The bit 'sysDesc(2)' indicates that LLDP agent should transmit
        'System Description TLV'.
        
        The bit 'sysCap(3)' indicates that LLDP agent should transmit
        'System Capabilities TLV'.
        
        There is no bit reserved for the management address TLV type
        since transmission of management address TLVs are controlled
        by another object, lldpConfigManAddrTable.
        
        The default value for lldpPortConfigTLVsTxEnable object is
        empty set, which means no enumerated values are set.
        
        The value of this object must be restored from non-volatile
        storage after a re-initialization of the management system."
    REFERENCE
        "IEEE 802.1AB-2005 10.2.1.1"
    DEFVAL { '00'h }
    ::= { lldpPortConfigEntry 4 }

    Information by oid_info

    Vendor: Avaya
    Module: LLDP-MIB (LLDP-MIB.mib)
    Type: TABULAR
    Access: read-write
    Syntax: BITS

    Automatically extracted from www.mibdepot.com

    Information by cisco

    lldpPortConfigTLVsTxEnable OBJECT-TYPE
    SYNTAX          BITS {
                        portDesc(0),
                        sysName(1),
                        sysDesc(2),
                        sysCap(3)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The lldpPortConfigTLVsTxEnable, defined as a bitmap,
        includes the basic set of LLDP TLVs whose transmission is
        allowed on the local LLDP agent by the network management.
        Each bit in the bitmap corresponds to a TLV type associated
        with a specific optional TLV.

        It should be noted that the organizationally-specific TLVs
        are excluded from the lldpTLVsTxEnable bitmap.

        LLDP Organization Specific Information Extension MIBs should
        have similar configuration object to control transmission
        of their organizationally defined TLVs.

        The bit 'portDesc(0)' indicates that LLDP agent should
        transmit 'Port Description TLV'.

        The bit 'sysName(1)' indicates that LLDP agent should transmit
        'System Name TLV'.

        The bit 'sysDesc(2)' indicates that LLDP agent should transmit
        'System Description TLV'.

        The bit 'sysCap(3)' indicates that LLDP agent should transmit
        'System Capabilities TLV'.

        There is no bit reserved for the management address TLV type
        since transmission of management address TLVs are controlled
        by another object, lldpConfigManAddrTable.

        The default value for lldpPortConfigTLVsTxEnable object is
        empty set, which means no enumerated values are set.

        The value of this object must be restored from non-volatile
        storage after a re-initialization of the management system."
    REFERENCE       "IEEE 802.1AB-2005 10.2.1.1"
    DEFVAL          { {  } } 
    ::= { lldpPortConfigEntry 4 }

    Information by ieee802

    lldpPortConfigTLVsTxEnable OBJECT-TYPE
    SYNTAX      BITS {
            portDesc(0),
            sysName(1),
            sysDesc(2),
            sysCap(3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The lldpPortConfigTLVsTxEnable, defined as a bitmap,
            includes the basic set of LLDP TLVs whose transmission is
            allowed on the local LLDP agent by the network management.
            Each bit in the bitmap corresponds to a TLV type associated
            with a specific optional TLV.

            It should be noted that the organizationally-specific TLVs
            are excluded from the lldpTLVsTxEnable bitmap.
            
            LLDP Organization Specific Information Extension MIBs should
            have similar configuration object to control transmission
            of their organizationally defined TLVs.

            The bit 'portDesc(0)' indicates that LLDP agent should
            transmit 'Port Description TLV'.

            The bit 'sysName(1)' indicates that LLDP agent should transmit
            'System Name TLV'.

            The bit 'sysDesc(2)' indicates that LLDP agent should transmit
            'System Description TLV'.

            The bit 'sysCap(3)' indicates that LLDP agent should transmit
            'System Capabilities TLV'.

            There is no bit reserved for the management address TLV type
            since transmission of management address TLVs are controlled
            by another object, lldpConfigManAddrTable.

            The default value for lldpPortConfigTLVsTxEnable object is
            empty set, which means no enumerated values are set.

            The value of this object must be restored from non-volatile
            storage after a re-initialization of the management system."
    REFERENCE 
            "IEEE 802.1AB-2005 10.2.1.1"
    DEFVAL  { { } }
    ::= { lldpPortConfigEntry 4 }

    Information by mibdepot

    lldpPortConfigTLVsTxEnable OBJECT-TYPE
    SYNTAX      BITS {
            portDesc(0),
            sysName(1),
            sysDesc(2),
            sysCap(3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The lldpPortConfigTLVsTxEnable, defined as a bitmap,
            includes the basic set of LLDP TLVs whose transmission is
            allowed on the local LLDP agent by the network management.
            Each bit in the bitmap corresponds to a TLV type associated
            with a specific optional TLV.

            It should be noted that the organizationally-specific TLVs
            are excluded from the lldpTLVsTxEnable bitmap.
            
            LLDP Organization Specific Information Extension MIBs should
            have similar configuration object to control transmission
            of their organizationally defined TLVs.

            The bit 'portDesc(0)' indicates that LLDP agent should
            transmit 'Port Description TLV'.

            The bit 'sysName(1)' indicates that LLDP agent should transmit
            'System Name TLV'.

            The bit 'sysDesc(2)' indicates that LLDP agent should transmit
            'System Description TLV'.

            The bit 'sysCap(3)' indicates that LLDP agent should transmit
            'System Capabilities TLV'.

            There is no bit reserved for the management address TLV type
            since transmission of management address TLVs are controlled
            by another object, lldpConfigManAddrTable.

            The default value for lldpPortConfigTLVsTxEnable object is
            empty set, which means no enumerated values are set.

            The value of this object must be restored from non-volatile
            storage after a re-initialization of the management system."
    REFERENCE 
            "IEEE 802.1AB-2005 10.2.1.1"
    DEFVAL  { { } }
    ::= { lldpPortConfigEntry 4 }

    Information by circitor

    lldpPortConfigTLVsTxEnable OBJECT-TYPE
    SYNTAX      BITS {
            portDesc(0),
            sysName(1),
            sysDesc(2),
            sysCap(3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The lldpPortConfigTLVsTxEnable, defined as a bitmap,
            includes the basic set of LLDP TLVs whose transmission is
            allowed on the local LLDP agent by the network management.
            Each bit in the bitmap corresponds to a TLV type associated
            with a specific optional TLV.

            It should be noted that the organizationally-specific TLVs
            are excluded from the lldpTLVsTxEnable bitmap.
            
            LLDP Organization Specific Information Extension MIBs should
            have similar configuration object to control transmission
            of their organizationally defined TLVs.

            The bit 'portDesc(0)' indicates that LLDP agent should
            transmit 'Port Description TLV'.

            The bit 'sysName(1)' indicates that LLDP agent should transmit
            'System Name TLV'.

            The bit 'sysDesc(2)' indicates that LLDP agent should transmit
            'System Description TLV'.

            The bit 'sysCap(3)' indicates that LLDP agent should transmit
            'System Capabilities TLV'.

            There is no bit reserved for the management address TLV type
            since transmission of management address TLVs are controlled
            by another object, lldpConfigManAddrTable.

            The default value for lldpPortConfigTLVsTxEnable object is
            empty set, which means no enumerated values are set.

            The value of this object must be restored from non-volatile
            storage after a re-initialization of the management system."
    REFERENCE 
            "IEEE 802.1AB-2004 10.2.1.1"
    DEFVAL  { { } }
    ::= { lldpPortConfigEntry 4 }

    Current Registration Authority (recovered by parent 1.0)

    ISO and IEC

    Brothers (3)

    OIDNameSub childrenSub Nodes TotalDescription
    1.0.8802.1.1.2.1.1.6.1.1 lldpPortConfigPortNum 0 0 The index value used to identify the port component
    (contained in the local chassis with the LLDP agent)
    associated with this ent…
    1.0.8802.1.1.2.1.1.6.1.2 lldpPortConfigAdminStatus 0 0 The administratively desired status of the local LLDP agent.

    If the associated lldpPortConfigAdminStatus object has a
    value of 't…
    1.0.8802.1.1.2.1.1.6.1.3 lldpPortConfigNotificationEnable 0 0 The lldpPortConfigNotificationEnable controls, on a per
    port basis, whether or not notifications from the agent
    are enabled. The…