Reference record for OID 1.2.840.10036.1.1.1.11


parent
1.2.840.10036.1.1.1 (dot11StationConfigEntry)
node code
11
node name
dot11OperationalRateSet
dot oid
1.2.840.10036.1.1.1.11
type
OBJECT-TYPE
asn1 oid
  • {iso(1) member-body(2) us(840) ieee802dot11(10036) dot11smt(1) dot11StationConfigTable(1) dot11StationConfigEntry(1) dot11OperationalRateSet(11)}
  • iri oid
  • /iso/member-body/us/ieee802dot11/dot11smt/dot11StationConfigTable/dot11StationConfigEntry/dot11OperationalRateSet
  • iri by oid_info
    /ISO/Member-Body/US/10036/1/1/1/11

    Description by circitor

    This attribute shall specify the set of data
    rates at which the station may transmit data.
    Each octet contains a value representing a rate.
    Each rate shall be within the range from 2 to 127,
    corresponding to data rates in increments of
    500 kbit/s from 1 Mbit/s to 63.5 Mbit/s, and shall
    be supported (as indicated in the supported rates
    table) for receiving data. This value is reported in
    transmitted Beacon, Probe Request, Probe Response,
    Association Request, Association Response,
    Reassociation Request, and Reassociation Response
    frames, and is used to determine whether a BSS
    with which the station desires to synchronize is
    suitable. It is also used when starting a BSS,
    as specified in 10.3.

    Parsed from file IEEE802dot11-MIB.mib
    Module: IEEE802dot11-MIB

    Description by cisco_v1

    This attribute shall specify the set of data
    rates at which the station may transmit data.
    Each octet contains a value representing a rate.
    Each rate shall be within the range from 2 to 127,
    corresponding to data rates in increments of
    500 kbit/s from 1 Mbit/s to 63.5 Mbit/s, and shall
    be supported (as indicated in the supported rates
    table) for receiving data. This value is reported in
    transmitted Beacon, Probe Request, Probe Response,
    Association Request, Association Response,
    Reassociation Request, and Reassociation Response
    frames, and is used to determine whether a BSS
    with which the station desires to synchronize is
    suitable. It is also used when starting a BSS,
    as specified in 10.3.

    Description by oid_info

    dot11OperationalRateSet OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(1..126))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "This attribute shall specify the set of data rates
    at which the station may transmit data. Each octet
    contains a value representing a rate. Each rate
    shall be within the range from 2 to 127,
    corresponding to data rates in increments of
    500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be
    supported (as indicated in the supported rates
    table) for receiving data. This value is reported in
    transmitted Beacon, Probe Request, Probe Response,
    Association Request, Association Response,
    Reassociation Request, and Reassociation Response
    frames, and is used to determine whether a BSS
    with which the station desires to synchronize is
    suitable. It is also used when starting a BSS,
    as specified in 10.3."

    View at oid-info.com

    Description by mibdepot

    This is a status variable.
    It is written by the SME when joining or establishing a BSS.

    This attribute specifies the set of non-HT data rates at which the station may transmit data. The attribute that specifies the set of HT data rates is dot11HTOperationalMCSSet. Each octet contains a value representing a rate. Each rate is within the range from 2 to 127, corresponding to data rates in increments of 500 kbit/s from 1 Mb/s to 63.5 Mb/s, and is supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. It is also used when starting a BSS, as specified in 6.3.4.

    Parsed from file 802_11mib.txt
    Company: None
    Module: IEEE802dot11-MIB

    Description by cisco

    This attribute shall specify the set of data
    rates at which the station may transmit data.
    Each octet contains a value representing a rate.
    Each rate shall be within the range from 2 to 127,
    corresponding to data rates in increments of
    500 kbit/s from 1 Mbit/s to 63.5 Mbit/s, and shall
    be supported (as indicated in the supported rates
    table) for receiving data. This value is reported in
    transmitted Beacon, Probe Request, Probe Response,
    Association Request, Association Response,
    Reassociation Request, and Reassociation Response
    frames, and is used to determine whether a BSS
    with which the station desires to synchronize is
    suitable. It is also used when starting a BSS,
    as specified in 10.3.

    Information by circitor

    dot11OperationalRateSet OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..126)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kbit/s from 1 Mbit/s to 63.5 Mbit/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. It is also used when starting a BSS, as specified in 10.3." ::= { dot11StationConfigEntry 11 }

    Information by cisco_v1

    dot11OperationalRateSet OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..126)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kbit/s from 1 Mbit/s to 63.5 Mbit/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. It is also used when starting a BSS, as specified in 10.3." ::= { dot11StationConfigEntry 11 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    dot11OperationalRateSet OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..126)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a status variable. It is written by the SME when joining or establishing a BSS. This attribute specifies the set of non-HT data rates at which the station may transmit data. The attribute that specifies the set of HT data rates is dot11HTOperationalMCSSet. Each octet contains a value representing a rate. Each rate is within the range from 2 to 127, corresponding to data rates in increments of 500 kbit/s from 1 Mb/s to 63.5 Mb/s, and is supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. It is also used when starting a BSS, as specified in 6.3.4." ::= { dot11StationConfigEntry 11 }

    Information by cisco

    dot11OperationalRateSet OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..126)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kbit/s from 1 Mbit/s to 63.5 Mbit/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. It is also used when starting a BSS, as specified in 10.3." ::= { dot11StationConfigEntry 11 }

    First Registration Authority (recovered by parent 1.2.840.10036)

    Vic Hayes

    Current Registration Authority (recovered by parent 1.2.840)

    Joyce Hsu

    Brothers (135)

    To many brothers! Only 100 nearest brothers are shown.

    OIDNameSub childrenSub Nodes TotalDescription
    ...
    1.2.840.10036.1.1.1.1 dot11StationID 0 0 The purpose of dot11StationID is to allow a manager to
    identify a station for its own purposes. This attribute
    provides for that…
    1.2.840.10036.1.1.1.2 dot11MediumOccupancyLimit 0 0 This attribute shall indicate the maximum amount of time,
    in TU, that a point coordinator (PC) may control the usage
    of the wirel…
    1.2.840.10036.1.1.1.3 dot11CFPollable 0 0 When this attribute is true, it shall indicate that
    the STA is able to respond to a CF-Poll with a data frame
    within a SIFS time.…
    1.2.840.10036.1.1.1.4 dot11CFPPeriod 0 0 The attribute shall describe the number of DTIM intervals
    between the start of CFPs. It is modified by
    MLME-START.request primit…
    1.2.840.10036.1.1.1.5 dot11CFPMaxDuration 0 0 The attribute shall describe the maximum duration of
    the CFP in TU that may be generated by the PCF. It is
    modified by MLME-START…
    1.2.840.10036.1.1.1.6 dot11AuthenticationResponseTimeOut 0 0 This attribute shall specify the number of time units (TUs)
    that a responding STA should wait for the next frame in the
    authentic…
    1.2.840.10036.1.1.1.7 dot11PrivacyOptionImplemented 0 0 This attribute, when true, shall indicate that the IEEE
    802.11 WEP option is implemented. The default value of
    this attribute sh…
    1.2.840.10036.1.1.1.8 dot11PowerManagementMode 0 0 This attribute shall specify the power management
    mode of the STA. When set to active, it shall
    indicate that the station is not …
    1.2.840.10036.1.1.1.9 dot11DesiredSSID 0 0 This attribute reflects the Service Set ID (SSID)
    used in the DesiredSSID parameter of the most recent
    MLME_Scan.request. This v…
    1.2.840.10036.1.1.1.10 dot11DesiredBSSType 0 0 This attribute shall specify the type of BSS the
    station shall use when scanning for a BSS with
    which to synchronize. This value …
    1.2.840.10036.1.1.1.12 dot11BeaconPeriod 0 0 This attribute shall specify the number of TUs that
    a station shall use for scheduling Beacon
    transmissions. This value is transm…
    1.2.840.10036.1.1.1.13 dot11DTIMPeriod 0 0 This attribute shall specify the number of beacon
    intervals that shall elapse between transmission of
    Beacons frames containing a…
    1.2.840.10036.1.1.1.14 dot11AssociationResponseTimeOut 0 0 This attribute shall specify the number of TU that a
    requesting STA should wait for a response to a
    transmitted association-reque…
    1.2.840.10036.1.1.1.15 dot11DisassociateReason 0 0 This attribute holds the most recently
    transmitted Reason Code in a Disassociation
    frame. If no Disassociation frame has been
    tra…
    1.2.840.10036.1.1.1.16 dot11DisassociateStation 0 0 This attribute holds the MAC address from the
    Address 1 field of the most recently transmitted
    Disassociation frame. If no Disas…
    1.2.840.10036.1.1.1.17 dot11DeauthenticateReason 0 0 This attribute holds the most recently
    transmitted Reason Code in a Deauthentication
    frame. If no Deauthentication frame has bee…
    1.2.840.10036.1.1.1.18 dot11DeauthenticateStation 0 0 This attribute holds the MAC address from the
    Address 1 field of the most recently transmitted
    Deauthentication frame. If no Dea…
    1.2.840.10036.1.1.1.19 dot11AuthenticateFailStatus 0 0 This attribute holds the most recently
    transmitted Status Code in a failed
    Authentication frame. If no failed
    Authentication fram…
    1.2.840.10036.1.1.1.20 dot11AuthenticateFailStation 0 0 This attribute holds the MAC address from the
    Address 1 field of the most recently transmitted
    failed Authentication frame. If n…
    1.2.840.10036.1.1.1.21 dot11MultiDomainCapabilityImplemented 0 0 This attribute, when TRUE, indicates that the
    station implementation is capable of supporting
    multiple regulatory domains. The c…
    1.2.840.10036.1.1.1.22 dot11MultiDomainCapabilityEnabled, dot11MultiDomainCapabilityActivated 0 0 This attribute, when TRUE, indicates that the
    capability of the station to operate in multiple
    regulatory domains is enabled. Th…
    1.2.840.10036.1.1.1.23 dot11CountryString 0 0 This attribute identifies the country in which the
    station is operating. The first two octets of this
    string is the two character…
    1.2.840.10036.1.1.1.24 dot11SpectrumManagementImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This attribute, when true, indicates that the stat…
    1.2.840.10036.1.1.1.25 dot11SpectrumManagementRequired 0 0 This is a control variable.
    It is written by the SME or external management entity.
    Changes take effect for the next MLME-START.r…
    1.2.840.10036.1.1.1.26 dot11RSNAOptionImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This variable indicates whether the entity is RSNA…
    1.2.840.10036.1.1.1.27 dot11RSNAPreauthenticationImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This variable indicates whether the entity support…
    1.2.840.10036.1.1.1.28 dot11OperatingClassesImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This attribute, when true, indicates that the stat…
    1.2.840.10036.1.1.1.29 dot11OperatingClassesRequired 0 0 This is a control variable.
    It is written by the SME or external management entity.
    Changes take effect for the next MLME-START.r…
    1.2.840.10036.1.1.1.30 dot11QosOptionImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This attribute, when true, indicates that the stat…
    1.2.840.10036.1.1.1.31 dot11ImmediateBlockAckOptionImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This attribute, when true, indicates that the stat…
    1.2.840.10036.1.1.1.32 dot11DelayedBlockAckOptionImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This attribute, when true, indicates that the stat…
    1.2.840.10036.1.1.1.33 dot11DirectOptionImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This attribute, when true, indicates that the stat…
    1.2.840.10036.1.1.1.34 dot11APSDOptionImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This attribute is available only at an AP. When tr…
    1.2.840.10036.1.1.1.35 dot11QAckOptionImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This attribute, when true, indicates that the stat…
    1.2.840.10036.1.1.1.36 dot11QBSSLoadImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This attribute is available only at an AP. This at…
    1.2.840.10036.1.1.1.37 dot11QueueRequestOptionImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This attribute is available only at an AP. This at…
    1.2.840.10036.1.1.1.38 dot11TXOPRequestOptionImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This attribute is available only at an AP. This at…
    1.2.840.10036.1.1.1.39 dot11MoreDataAckOptionImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This attribute, when true, indicates that the stat…
    1.2.840.10036.1.1.1.40 dot11AssociateInNQBSS 0 0 This is a control variable.
    It is written by an external management entity.
    Changes take effect as soon as practical in the imple…
    1.2.840.10036.1.1.1.41 dot11DLSAllowedInQBSS 0 0 This is a control variable.
    It is written by an external management entity.
    Changes take effect as soon as practical in the imple…
    1.2.840.10036.1.1.1.42 dot11DLSAllowed 0 0 This is a control variable.
    It is written by an external management entity.
    Changes take effect as soon as practical in the imple…
    1.2.840.10036.1.1.1.43 dot11AssociateStation 0 0 This is a status variable.
    It is written by the MAC when a STA associates.

    This attribute indicates the MAC address from the Addr…
    1.2.840.10036.1.1.1.44 dot11AssociateID 0 0 This is a status variable.
    It is written by the MAC when a STA associates.

    This attribute indicates the Association ID from the m…
    1.2.840.10036.1.1.1.45 dot11AssociateFailStation 0 0 This is a status variable.
    It is written by the MAC when a STA fails to associate.

    This attribute indicates the MAC address from …
    1.2.840.10036.1.1.1.46 dot11AssociateFailStatus 0 0 This is a status variable.
    It is written by the MAC when a STA fails to associate.

    This attribute indicates the most recently tra…
    1.2.840.10036.1.1.1.47 dot11ReassociateStation 0 0 This is a status variable.
    It is written by the MAC when a STA reassociates.

    This attribute indicates the MAC address from the Ad…
    1.2.840.10036.1.1.1.48 dot11ReassociateID 0 0 This is a status variable.
    It is written by the MAC when a STA reassociates.

    This attribute indicates the Association ID from the…
    1.2.840.10036.1.1.1.49 dot11ReassociateFailStation 0 0 This is a status variable.
    It is written by the MAC when a STA fails to reassociate.

    This attribute indicates the MAC address fro…
    1.2.840.10036.1.1.1.50 dot11ReassociateFailStatus 0 0 This is a status variable.
    It is written by the MAC when a STA fails to reassociate.

    This attribute indicates the most recently t…
    1.2.840.10036.1.1.1.51 dot11RadioMeasurementImplemented 0 0 This is a capability variable.
    Its value is determined by device capabilities.

    This attribute, when true, indicates that the stat…
    1.2.840.10036.1.1.1.52 dot11RadioMeasurementActivated 0 0 This is a control variable.
    It is written by an external management entity when any of the MIB variables listed in 8.4.2.47 is e…
    1.2.840.10036.1.1.1.53 dot11RMMeasurementProbeDelay 0 0 This is a control variable.
    It is written by an external management entity.
    Changes take effect as soon as practical in the imple…
    1.2.840.10036.1.1.1.54 dot11RMMeasurementPilotPeriod 0 0 This is a control variable.
    It is written by an external management entity.
    Changes take effect as soon as practical in the imple…
    1.2.840.10036.1.1.1.55 dot11RMLinkMeasurementActivated 0 0 This is a control variable.
    It is written by an external management entity.
    Changes take effect for the next MLME-START.request p…
    1.2.840.10036.1.1.1.56 dot11RMNeighborReportActivated 0 0 This is a control variable.
    It is written by an external management entity.
    Changes take effect as soon as practical in the imple…
    1.2.840.10036.1.1.1.57 dot11RMParallelMeasurementsActivated 0 0 This is a control variable.
    It is written by an external management entity.
    Changes take effect for the next MLME-START.request p…
    1.2.840.10036.1.1.1.58 dot11RMRepeatedMeasurementsActivated 0 0 This is a control variable.
    It is written by an external management entity.
    Changes take effect for the next MLME-START.request p…
    1.2.840.10036.1.1.1.59 dot11RMBeaconPassiveMeasurementActivated 0 0 This is a control variable.
    It is written by an external management entity.
    Changes take effect for the next MLME-START.request p…
    1.2.840.10036.1.1.1.60 dot11RMBeaconActiveMeasurementActivated 0 0 This is a control variable.
    It is written by an external management entity.
    Changes take effect for the next MLME-START.request p…
    1.2.840.10036.1.1.1.61 dot11RMBeaconTableMeasurementActivated 0 0 This is a control variable.
    It is written by an external management entity.
    Changes take effect for the next MLME-START.request p…
    ...