dot11Groups OBJECT IDENTIFIER ::= { dot11Conformance 1 }
dot11Groups OBJECT IDENTIFIER ::= { dot11Conformance 1 }
Automatically extracted from Cisco "SNMP v2 MIBs".
dot11Groups OBJECT IDENTIFIER ::= { dot11Conformance 1 }
dot11Groups OBJECT IDENTIFIER ::= { dot11Conformance 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.2.840.10036.5.1.1 | dot11SMTbase | 0 | 0 | The SMT object class provides the necessary support at the STA to manage the processes in the STA such that the STA may work coop… |
| 1.2.840.10036.5.1.2 | dot11SMTprivacy | 0 | 0 | The SMTPrivacy package is a set of attributes that are present if WEP is implemented in the STA. |
| 1.2.840.10036.5.1.3 | dot11MACbase | 0 | 0 | The MAC object class provides the necessary support for the access control, generation, and verification of frame check sequences… |
| 1.2.840.10036.5.1.4 | dot11MACStatistics | 0 | 0 | The MACStatistics package provides extended statistical information on the operation of the MAC. This package is completely opt… |
| 1.2.840.10036.5.1.5 | dot11ResourceTypeID | 0 | 0 | Attributes used to identify a STA, its manufacturer, and various product names and versions. |
| 1.2.840.10036.5.1.6 | dot11SmtAuthenticationAlgorithms | 0 | 0 | Authentication Algorithm Table. |
| 1.2.840.10036.5.1.7 | dot11PhyOperationComplianceGroup | 0 | 0 | PHY layer operations attributes. |
| 1.2.840.10036.5.1.8 | dot11PhyAntennaComplianceGroup | 0 | 0 | Attributes for Data Rates for IEEE 802.11. |
| 1.2.840.10036.5.1.9 | dot11PhyTxPowerComplianceGroup | 0 | 0 | Attributes for Control and Management of transmit power. |
| 1.2.840.10036.5.1.10 | dot11PhyFHSSComplianceGroup | 0 | 0 | Attributes that configure the Frequency Hopping for IEEE 802.11. |
| 1.2.840.10036.5.1.11 | dot11PhyDSSSComplianceGroup | 0 | 0 | Attributes that configure the DSSS for IEEE 802.11. |
| 1.2.840.10036.5.1.12 | dot11PhyIRComplianceGroup | 0 | 0 | Attributes that configure the baseband IR for IEEE 802.11. |
| 1.2.840.10036.5.1.13 | dot11PhyRegDomainsSupportGroup | 0 | 0 | Attributes that specify the supported Regulation Domains. |
| 1.2.840.10036.5.1.14 | dot11PhyAntennasListGroup | 0 | 0 | Attributes that specify the supported Regulation Domains. |
| 1.2.840.10036.5.1.15 | dot11PhyRateGroup | 0 | 0 | Attributes for Data Rates for IEEE 802.11. |
| 1.2.840.10036.5.1.16 | dot11CountersGroup | 0 | 0 | Attributes from the dot11CountersGroup that are not described in the dot11MACStatistics group. These objects are mandatory. |
| 1.2.840.10036.5.1.17 | dot11NotificationGroup | 0 | 0 | IEEE 802.11 notifications |
| 1.2.840.10036.5.1.18 | dot11SMTbase2 | 0 | 0 | The SMTbase2 object class provides the necessary support at the STA to manage the processes in the STA such that the STA may work… |
| 1.2.840.10036.5.1.19 | dot11PhyOFDMComplianceGroup | 0 | 0 | Attributes that configure the OFDM for IEEE 802.11. |
| 1.2.840.10036.5.1.20 | dot11SMTbase3 | 0 | 0 | The SMTbase3 object class provides the necessary support at the STA to manage the processes in the STA such that the STA may work… |
| 1.2.840.10036.5.1.21 | dot11MultiDomainCapabilityGroup | 0 | 0 | The dot11MultiDomainCapabilityGroup object class provides the objects necessary to manage the channels usable by a STA, when th… |
| 1.2.840.10036.5.1.22 | dot11PhyFHSSComplianceGroup2 | 0 | 0 | Attributes that configure the Frequency Hopping for IEEE 802.11 when multi-domain capability option is implemented. |
| 1.2.840.10036.5.1.23 | dot11PhyHRDSSSComplianceGroup | 0 | 0 | Attributes that configure the HRDSSS for IEEE 802.11. |
| 1.2.840.10036.5.1.24 | dot11PhyERPComplianceGroup | 0 | 0 | Attributes that configure the ERP. |
| 1.2.840.10036.5.1.25 | dot11RSNAadditions | 0 | 0 | This object class provides the objects from the IEEE 802.11 MIB required to manage RSNA functionality. Note that additional obj… |
| 1.2.840.10036.5.1.26 | dot11SMTbase4 | 0 | 0 | Superseded by dot11SMTbase5. The SMTbase4 object class provides the necessary support at the IEEE STA to manage the processes in… |
| 1.2.840.10036.5.1.27 | dot11RSNBase | 0 | 0 | The dot11RSNBase object class provides the necessary support for managing RSNA functionality in the STA. |
| 1.2.840.10036.5.1.28 | dot11RSNPMKcachingGroup | 0 | 0 | The dot11RSNPMKcachingGroup object class provides the necessary support for managing PMK caching functionality in the STA |
| 1.2.840.10036.5.1.29 | dot11RSNSMKcachingGroup | 0 | 0 | The dot11RSNSMKcachingGroup object class provides the necessary support for managing SMK caching functionality in the STA. |
| 1.2.840.10036.5.1.30 | dot11SMTbase5 | 0 | 0 | The SMTbase5 object class provides the necessary support at the STA to manage the processes in the STA so that the STA may work… |
| 1.2.840.10036.5.1.31 | dot11MACbase2 | 0 | 0 | Superseded by dot11MACbase3. The MAC object class provides the necessary support for the access control, generation, and verific… |
| 1.2.840.10036.5.1.32 | dot11CountersGroup2 | 0 | 0 | Superseded by dot11CountersGroup3. Attributes from the dot11CountersGroup that are not described in the dot11MACStatistics group… |
| 1.2.840.10036.5.1.33 | dot11Qosadditions | 0 | 0 | This object class provides the objects from the IEEE 802.11 MIB required to manage QoS functionality. |
| 1.2.840.10036.5.1.34 | dot11SMTbase6 | 0 | 0 | Superseded by dot11SMTbase7. The SMTbase6 object class provides the necessary support at the STA to manage the processes in the … |
| 1.2.840.10036.5.1.35 | dot11PhyOFDMComplianceGroup2 | 0 | 0 | Superseded by dot11PhyOFDMComplianceGroup3. Attributes that configure the OFDM for IEEE 802.11. |
| 1.2.840.10036.5.1.36 | dot11SMTbase7 | 0 | 0 | Superseded by dot11SMTbase8. The SMTbase7 object class provides the necessary support at the STA to manage the processes in the … |
| 1.2.840.10036.5.1.37 | dot11SMTRMRequest | 0 | 0 | The SMTRMRequest package is a set of attributes that are present if the STA supports the Radio Measurement service. |
| 1.2.840.10036.5.1.38 | dot11SMTRMReport | 0 | 0 | The SMTRMReport package is a set of attributes that are present if the STA supports the Radio Measurement service. |
| 1.2.840.10036.5.1.39 | dot11SMTRMConfig | 0 | 0 | The SMTRMConfig package is a set of attributes that are present if the STA supports the Radio Measurement service. |
| 1.2.840.10036.5.1.40 | dot11FTComplianceGroup | 0 | 0 | This object class provides the objects from the IEEE 802.11 MIB required to manage fast BSS transition functionality. Note that… |
| 1.2.840.10036.5.1.41 | dot11SMTbase8 | 0 | 0 | Superseded by dot11SMTbase9. The SMTbase8 object class provides the necessary support at the STA to manage the processes in the … |
| 1.2.840.10036.5.1.42 | dot11PhyOFDMComplianceGroup3 | 0 | 0 | Attributes that configure the OFDM for IEEE 802.11. |
| 1.2.840.10036.5.1.43 | dot11SMTbase9 | 0 | 0 | Superseded by dot11SMTbase10. The SMTbase9 object class provides the necessary support at the STA to manage the processes in the… |
| 1.2.840.10036.5.1.44 | dot11PhyAntennaComplianceGroup2 | 0 | 0 | Attributes for Data Rates for IEEE 802.11. |
| 1.2.840.10036.5.1.45 | dot11MACbase3 | 0 | 0 | The MAC object class provides the necessary support for the access control, generation, and verification of frame check sequenc… |
| 1.2.840.10036.5.1.46 | dot11CountersGroup3 | 0 | 0 | Attributes from the dot11CountersGroup that are not described in the dot11MACStatistics group. These objects are mandatory. |
| 1.2.840.10036.5.1.47 | dot11SMTbase10 | 0 | 0 | Superceded by dot11SMTbase 11. The SMTbase10 object class provides the necessary support at the STA to manage the processes in t… |
| 1.2.840.10036.5.1.48 | dot11PhyMCSGroup | 0 | 0 | Attributes for MCS for IEEE 802.11 HT. |
| 1.2.840.10036.5.1.49 | dot11PhyHTComplianceGroup | 0 | 0 | Attributes that configure the HT for IEEE 802.11. |
| 1.2.840.10036.5.1.50 | dot11HTMACAdditions | 0 | 0 | Attributes that configure the HT for IEEE 802.11. |
| 1.2.840.10036.5.1.51 | dot11TransmitBeamformingGroup | 0 | 0 | Attributes that configure the Beamforming for IEEE 802.11 HT. |
| 1.2.840.10036.5.1.53 | dot11SMTbase11 | 0 | 0 | Superseded by dot11SMTbase12. The SMTbase11 object class provides the necessary support at the STA to manage the processes in th… |
| 1.2.840.10036.5.1.54 | dot11SMTWNMRequest | 0 | 0 | The SMTWNMRequest package is a set of attributes that shall be present if the STA supports the WNM service. |
| 1.2.840.10036.5.1.55 | dot11SMTWNMReport | 0 | 0 | The SMTWNMReport package is a set of attributes that shall be present if the STA supports the WNM service. |
| 1.2.840.10036.5.1.56 | dot11MeshComplianceGroup | 0 | 0 | This object class provides the objects from the IEEE 802.11 MIB required to manage mandatory mesh functionality. Note that addi… |
| 1.2.840.10036.5.1.57 | dot11SMTbase12 | 0 | 0 | The SMTbase12 object class provides the necessary support at the STA to manage the processes in the STA such that the STA may w… |
| 1.2.840.10036.5.1.58 | dot11OperatingClassesGroup | 0 | 0 | Attributes that configure the OFDM for IEEE 802.11 in many regulatory domains. |
| 1.2.840.10036.5.1.59 | dot11PhyOperationComplianceGroup2 | 0 | 0 | PHY layer operations attributes. |
| 1.2.840.10036.5.1.60 | dot11MeshOptionGroup | 0 | 0 | This object class provides the objects from the IEEE 802.11 MIB required to manage optional mesh functionality. Note that other… |
| 1.2.840.10036.5.1.61 | dot11MeshHWMPComplianceGroup | 0 | 0 | This object class provides the objects from the IEEE 802.11 MIB required to manage HWMP path selection functionality. Note that… |
| 1.2.840.10036.5.1.62 | dot11PasswordAuthComplianceGroup | 0 | 0 | This object class provides the objects from the IEEE 802.11 MIB required to manage password authentication. Note that other obj… |
| 1.2.840.10036.5.1.72 | dot11SpectrumManagementGroup | 0 | 0 | This object class provides the objects from the IEEE 802.11 MIB for spectrum management. |
| 1.2.840.10036.5.1.73 | dot11ProtectedManagementFrameGroup | 0 | 0 | This object class provides the objects from the IEEE 802.11 MIB required to operate protected management frame. |
| 1.2.840.10036.5.1.74 | dot11LCIDSEGroup | 0 | 0 | This object class provides the objects from the IEEE 802.11 MIB required to enable 3650-3700 MHz Operation in USA. |
| 1.2.840.10036.5.1.75 | dot11TDLSComplianceGroup | 0 | 0 | This object class provides the objects from the IEEE 802.11 MIB required to operate tunneled direct link setup. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.2.840.10036.5.2 | dot11Compliances | 9 | 9 | None |