ieee8021SpanningTreeRstpTxHoldCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate. This is used by bridges
that are running the Rapid Spanning Tree Protocol.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE "12.8.1.1.3 m)"
DEFVAL { 3 }
View at oid-info.com
The value used by the Port Transmit state machine to limit
the maximum transmission rate. This is used by bridges
that are running the Rapid Spanning Tree Protocol.
The value of this object MUST be retained across
reinitializations of the management system.
Automatically extracted from IEEE Management Information Bases (MIBs).
ieee8021SpanningTreeRstpTxHoldCount OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The value used by the Port Transmit state machine to limit the maximum transmission rate. This is used by bridges that are running the Rapid Spanning Tree Protocol. The value of this object MUST be retained across reinitializations of the management system." REFERENCE "12.8.1.1.3 m)" DEFVAL { 3 } ::= { ieee8021SpanningTreeEntry 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.111.2.802.1.1.3.1.1.1.1 | ieee8021SpanningTreeComponentId | 0 | 0 | The component identifier is used to distinguish between the multiple virtual bridge instances within a PBB. In simple situations… |
| 1.3.111.2.802.1.1.3.1.1.1.2 | ieee8021SpanningTreeProtocolSpecification | 0 | 0 | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 10… |
| 1.3.111.2.802.1.1.3.1.1.1.3 | ieee8021SpanningTreePriority | 0 | 0 | The value of the write-able portion of the Bridge ID (i.e., the first two octets of the (8 octet long) Bridge ID). The other (la… |
| 1.3.111.2.802.1.1.3.1.1.1.4 | ieee8021SpanningTreeTimeSinceTopologyChange | 0 | 0 | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. For RSTP, this repor… |
| 1.3.111.2.802.1.1.3.1.1.1.5 | ieee8021SpanningTreeTopChanges | 0 | 0 | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. Discontinu… |
| 1.3.111.2.802.1.1.3.1.1.1.6 | ieee8021SpanningTreeDesignatedRoot | 0 | 0 | The bridge identifier of the root of the spanning tree, as determined by the Spanning Tree Protocol, as executed by this node. T… |
| 1.3.111.2.802.1.1.3.1.1.1.7 | ieee8021SpanningTreeRootCost | 0 | 0 | The cost of the path to the root as seen from this bridge. |
| 1.3.111.2.802.1.1.3.1.1.1.8 | ieee8021SpanningTreeRootPort | 0 | 0 | The port number of the port that offers the lowest cost path from this bridge to the root bridge. |
| 1.3.111.2.802.1.1.3.1.1.1.9 | ieee8021SpanningTreeMaxAge | 0 | 0 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
| 1.3.111.2.802.1.1.3.1.1.1.10 | ieee8021SpanningTreeHelloTime | 0 | 0 | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the span… |
| 1.3.111.2.802.1.1.3.1.1.1.11 | ieee8021SpanningTreeHoldTime | 0 | 0 | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by th… |
| 1.3.111.2.802.1.1.3.1.1.1.12 | ieee8021SpanningTreeForwardDelay | 0 | 0 | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving tow… |
| 1.3.111.2.802.1.1.3.1.1.1.13 | ieee8021SpanningTreeBridgeMaxAge | 0 | 0 | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range… |
| 1.3.111.2.802.1.1.3.1.1.1.14 | ieee8021SpanningTreeBridgeHelloTime | 0 | 0 | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified … |
| 1.3.111.2.802.1.1.3.1.1.1.15 | ieee8021SpanningTreeBridgeForwardDelay | 0 | 0 | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1998 specifies that the… |
| 1.3.111.2.802.1.1.3.1.1.1.16 | ieee8021SpanningTreeVersion | 0 | 0 | The version of Spanning Tree Protocol the bridge is currently running. The values are directly from the IEEE standard. New valu… |