The MEP table entry
The MEP table entry
The MEP table entry
The MEP table entry
Parsed from file IEEE8021-CFM-MIB.my.txt
Company: None
Module: IEEE8021-CFM-MIB
The MEP table entry
Parsed from file IEEE8021-CFM-MIB.mib
Module: IEEE8021-CFM-MIB
dot1agCfmMepEntry OBJECT-TYPE SYNTAX Dot1agCfmMepEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The MEP table entry" INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier } ::= { dot1agCfmMepTable 1 }
Vendor: Cisco Systems
Module: IEEE8021-CFM-MIB (IEEE8021-CFM-MIB-V1SMI.my)
Type: ENTRY
Access: not-accessible
Syntax: Dot1agCfmMepEntry
Automatically extracted from www.mibdepot.com
dot1agCfmMepEntry OBJECT-TYPE SYNTAX Dot1agCfmMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP table entry" INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier } ::= { dot1agCfmMepTable 1 }
dot1agCfmMepEntry OBJECT-TYPE SYNTAX Dot1agCfmMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP table entry" INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier } ::= { dot1agCfmMepTable 1 }
dot1agCfmMepEntry OBJECT-TYPE SYNTAX Dot1agCfmMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP table entry" INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier } ::= { dot1agCfmMepTable 1 }
dot1agCfmMepEntry OBJECT-TYPE SYNTAX Dot1agCfmMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP table entry" INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier } ::= { dot1agCfmMepTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.111.2.802.1.1.8.1.7.1.1.1 | dot1agCfmMepIdentifier | 0 | 0 | Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance A… |
| 1.3.111.2.802.1.1.8.1.7.1.1.2 | dot1agCfmMepIfIndex | 0 | 0 | This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, … |
| 1.3.111.2.802.1.1.8.1.7.1.1.3 | dot1agCfmMepDirection | 0 | 0 | The direction in which the MEP faces on the Bridge port. |
| 1.3.111.2.802.1.1.8.1.7.1.1.4 | dot1agCfmMepPrimaryVid | 0 | 0 | An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that ei… |
| 1.3.111.2.802.1.1.8.1.7.1.1.5 | dot1agCfmMepActive | 0 | 0 | Administrative state of the MEP A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to funct… |
| 1.3.111.2.802.1.1.8.1.7.1.1.6 | dot1agCfmMepFngState | 0 | 0 | Current state of the MEP Fault Notification Generator State Machine. |
| 1.3.111.2.802.1.1.8.1.7.1.1.7 | dot1agCfmMepCciEnabled | 0 | 0 | If set to true, the MEP will generate CCM messages. |
| 1.3.111.2.802.1.1.8.1.7.1.1.8 | dot1agCfmMepCcmLtmPriority | 0 | 0 | The priority value for CCMs and LTMs transmitted by the MEP. Default Value is the highest priority value allowed to pass through … |
| 1.3.111.2.802.1.1.8.1.7.1.1.9 | dot1agCfmMepMacAddress | 0 | 0 | MAC address of the MEP. |
| 1.3.111.2.802.1.1.8.1.7.1.1.10 | dot1agCfmMepLowPrDef | 0 | 0 | An integer value specifying the lowest priority defect that is allowed to generate fault alarm. |
| 1.3.111.2.802.1.1.8.1.7.1.1.11 | dot1agCfmMepFngAlarmTime | 0 | 0 | The time that defects MUST be present before a Fault Alarm is issued (fngAlarmTime. 20.33.3) (default 2.5s). |
| 1.3.111.2.802.1.1.8.1.7.1.1.12 | dot1agCfmMepFngResetTime | 0 | 0 | The time that defects MUST be absent before resetting a Fault Alarm (fngResetTime, 20.33.4) (default 10s). |
| 1.3.111.2.802.1.1.8.1.7.1.1.13 | dot1agCfmMepHighestPrDefect | 0 | 0 | The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_R… |
| 1.3.111.2.802.1.1.8.1.7.1.1.14 | dot1agCfmMepDefects | 0 | 0 | A vector of Boolean error conditions from Table 20-1, any of which may be true: DefRDICCM(0) DefMACstatus(1) DefRemoteCCM(2) DefErro… |
| 1.3.111.2.802.1.1.8.1.7.1.1.15 | dot1agCfmMepErrorCcmLastFailure | 0 | 0 | The last-received CCM that triggered an DefErrorCCM fault. |
| 1.3.111.2.802.1.1.8.1.7.1.1.16 | dot1agCfmMepXconCcmLastFailure | 0 | 0 | The last-received CCM that triggered a DefXconCCM fault. |
| 1.3.111.2.802.1.1.8.1.7.1.1.17 | dot1agCfmMepCcmSequenceErrors | 0 | 0 | The total number of out-of-sequence CCMs received from all remote MEPs. |
| 1.3.111.2.802.1.1.8.1.7.1.1.18 | dot1agCfmMepCciSentCcms | 0 | 0 | Total number of Continuity Check messages transmitted. |
| 1.3.111.2.802.1.1.8.1.7.1.1.19 | dot1agCfmMepNextLbmTransId | 0 | 0 | Next sequence number/transaction identifier to be sent in a Loopback message. This sequence number can be zero because it wraps a… |
| 1.3.111.2.802.1.1.8.1.7.1.1.20 | dot1agCfmMepLbrIn | 0 | 0 | Total number of valid, in-order Loopback Replies received. |
| 1.3.111.2.802.1.1.8.1.7.1.1.21 | dot1agCfmMepLbrInOutOfOrder | 0 | 0 | The total number of valid, out-of-order Loopback Replies received. |
| 1.3.111.2.802.1.1.8.1.7.1.1.22 | dot1agCfmMepLbrBadMsdu | 0 | 0 | The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM… |
| 1.3.111.2.802.1.1.8.1.7.1.1.23 | dot1agCfmMepLtmNextSeqNumber | 0 | 0 | Next transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps … |
| 1.3.111.2.802.1.1.8.1.7.1.1.24 | dot1agCfmMepUnexpLtrIn | 0 | 0 | The total number of unexpected LTRs received (20.39.1). |
| 1.3.111.2.802.1.1.8.1.7.1.1.25 | dot1agCfmMepLbrOut | 0 | 0 | Total number of Loopback Replies transmitted. |
| 1.3.111.2.802.1.1.8.1.7.1.1.26 | dot1agCfmMepTransmitLbmStatus | 0 | 0 | A Boolean flag set to true by the MEP Loopback Initiator State Machine or an MIB manager to indicate that another LBM is being tr… |
| 1.3.111.2.802.1.1.8.1.7.1.1.27 | dot1agCfmMepTransmitLbmDestMacAddress | 0 | 0 | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the … |
| 1.3.111.2.802.1.1.8.1.7.1.1.28 | dot1agCfmMepTransmitLbmDestMepId | 0 | 0 | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sen… |
| 1.3.111.2.802.1.1.8.1.7.1.1.29 | dot1agCfmMepTransmitLbmDestIsMepId | 0 | 0 | True indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC addre… |
| 1.3.111.2.802.1.1.8.1.7.1.1.30 | dot1agCfmMepTransmitLbmMessages | 0 | 0 | The number of Loopback messages to be transmitted. |
| 1.3.111.2.802.1.1.8.1.7.1.1.31 | dot1agCfmMepTransmitLbmDataTlv | 0 | 0 | An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. The intent is to be able to … |
| 1.3.111.2.802.1.1.8.1.7.1.1.32 | dot1agCfmMepTransmitLbmVlanPriority | 0 | 0 | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is CCM priority. |
| 1.3.111.2.802.1.1.8.1.7.1.1.33 | dot1agCfmMepTransmitLbmVlanDropEnable | 0 | 0 | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enabl… |
| 1.3.111.2.802.1.1.8.1.7.1.1.34 | dot1agCfmMepTransmitLbmResultOK | 0 | 0 | Indicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback … |
| 1.3.111.2.802.1.1.8.1.7.1.1.35 | dot1agCfmMepTransmitLbmSeqNumber | 0 | 0 | The Loopback Transaction Identifier (dot1agCfmMepNextLbmTransId) of the first LBM (to be) sent. The value returned is undefined i… |
| 1.3.111.2.802.1.1.8.1.7.1.1.36 | dot1agCfmMepTransmitLtmStatus | 0 | 0 | A Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted. Reset to false by the MEP Linktrac… |
| 1.3.111.2.802.1.1.8.1.7.1.1.37 | dot1agCfmMepTransmitLtmFlags | 0 | 0 | The flags field for LTMs transmitted by the MEP. |
| 1.3.111.2.802.1.1.8.1.7.1.1.38 | dot1agCfmMepTransmitLtmTargetMacAddress | 0 | 0 | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the … |
| 1.3.111.2.802.1.1.8.1.7.1.1.39 | dot1agCfmMepTransmitLtmTargetMepId | 0 | 0 | An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP i… |
| 1.3.111.2.802.1.1.8.1.7.1.1.40 | dot1agCfmMepTransmitLtmTargetIsMepId | 0 | 0 | True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC addr… |
| 1.3.111.2.802.1.1.8.1.7.1.1.41 | dot1agCfmMepTransmitLtmTtl | 0 | 0 | The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decr… |
| 1.3.111.2.802.1.1.8.1.7.1.1.42 | dot1agCfmMepTransmitLtmResult | 0 | 0 | Indicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Messag… |
| 1.3.111.2.802.1.1.8.1.7.1.1.43 | dot1agCfmMepTransmitLtmSeqNumber | 0 | 0 | The LTM Transaction Identifier (dot1agCfmMepLtmNextSeqNumber) of the LTM sent. The value returned is undefined if dot1agCfmMepTran… |
| 1.3.111.2.802.1.1.8.1.7.1.1.44 | dot1agCfmMepTransmitLtmEgressIdentifier | 0 | 0 | Identifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM. The low-orde… |
| 1.3.111.2.802.1.1.8.1.7.1.1.45 | dot1agCfmMepRowStatus | 0 | 0 | The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value… |
| 1.3.111.2.802.1.1.8.1.7.1.1.46 | dot1agCfmMepPbbTeCanReportPbbTePresence | 0 | 0 | A Boolean valued parameter that is set to true if the system has the capability to report the presence of traffic and that the ca… |
| 1.3.111.2.802.1.1.8.1.7.1.1.47 | dot1agCfmMepPbbTeTrafficMismatchDefect | 0 | 0 | A Boolean valued parameter that is set to true if the system has detected a traffic field mismatch defect. Mismatch detection is… |
| 1.3.111.2.802.1.1.8.1.7.1.1.48 | dot1agCfmMepPbbTransmitLbmLtmReverseVid | 0 | 0 | This column specifies the value to use in the Reverse VID value field of PBB-TE MIP TLVs contained within TransmitLTM pdus. |
| 1.3.111.2.802.1.1.8.1.7.1.1.49 | dot1agCfmMepPbbTeMismatchAlarm | 0 | 0 | A Boolean valued parameter that is set to true if the system is to allow a mismatch defect to generate a fault alarm. |
| 1.3.111.2.802.1.1.8.1.7.1.1.50 | dot1agCfmMepPbbTeLocalMismatchDefect | 0 | 0 | A Boolean valued parameter that is set to true if the system has detected a local mismatch defect. Mismatch detection is an opti… |
| 1.3.111.2.802.1.1.8.1.7.1.1.51 | dot1agCfmMepPbbTeMismatchSinceReset | 0 | 0 | A Boolean valued parameter indicating if the mismatch defect has been present since the MEP Mismatch Fault Notification Generator… |