Reference record for OID 1.3.6.1.2.1.10.127.1.1.1.1.5



parent
1.3.6.1.2.1.10.127.1.1.1.1 (docsIfDownstreamChannelEntry)
node code
5
node name
docsIfDownChannelInterleave
dot oid
1.3.6.1.2.1.10.127.1.1.1.1.5
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfBaseObjects(1) docsIfDownstreamChannelTable(1) docsIfDownstreamChannelEntry(1) docsIfDownChannelInterleave(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfBaseObjects(1) docsIfDownstreamChannelTable(1) docsIfDownstreamChannelEntry(1) docsIfDownChannelInterleave(5)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfBaseObjects(1) docsIfDownstreamChannelTable(1) docsIfDownstreamChannelEntry(1) docsIfDownChannelInterleave(5)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfBaseObjects(1) docsIfDownstreamChannelTable(1) docsIfDownstreamChannelEntry(1) docsIfDownChannelInterleave(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfBaseObjects(1) docsIfDownstreamChannelTable(1) docsIfDownstreamChannelEntry(1) docsIfDownChannelInterleave(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfBaseObjects(1) docsIfDownstreamChannelTable(1) docsIfDownstreamChannelEntry(1) docsIfDownChannelInterleave(5)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/docsIfMib/docsIfMibObjects/docsIfBaseObjects/docsIfDownstreamChannelTable/docsIfDownstreamChannelEntry/docsIfDownChannelInterleave
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/docsIfMib/docsIfMibObjects/docsIfBaseObjects/docsIfDownstreamChannelTable/docsIfDownstreamChannelEntry/docsIfDownChannelInterleave
  • /iso/org/dod/internet/mgmt/mib-2/transmission/docsIfMib/docsIfMibObjects/docsIfBaseObjects/docsIfDownstreamChannelTable/docsIfDownstreamChannelEntry/docsIfDownChannelInterleave
  • /iso/org/dod/internet/mgmt/mib/transmission/docsIfMib/docsIfMibObjects/docsIfBaseObjects/docsIfDownstreamChannelTable/docsIfDownstreamChannelEntry/docsIfDownChannelInterleave
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/docsIfMib/docsIfMibObjects/docsIfBaseObjects/docsIfDownstreamChannelTable/docsIfDownstreamChannelEntry/docsIfDownChannelInterleave
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/docsIfMib/docsIfMibObjects/docsIfBaseObjects/docsIfDownstreamChannelTable/docsIfDownstreamChannelEntry/docsIfDownChannelInterleave
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/10/127/1/1/1/1/5

    Description by circitor

    The Forward Error Correction (FEC) interleaving used
    for this downstream channel.
    Values are defined as follows:
    taps8Increment16(3): protection 5.9/4.1 usec,
    latency .22/.15 msec
    taps16Increment8(4): protection 12/8.2 usec,
    latency .48/.33 msec
    taps32Increment4(5): protection 24/16 usec,
    latency .98/.68 msec
    taps64Increment2(6): protection 47/33 usec,
    latency 2/1.4 msec
    taps128Increment1(7): protection 95/66 usec,
    latency 4/2.8 msec
    taps12increment17(8): protection 18/14 usec,
    latency 0.43/0.32 msec

    The value 'taps12increment17' is supported by EuroDOCSIS
    cable systems only, and the others by DOCSIS cable systems.

    If the interface is down, this object either returns
    the configured value (CMTS), the most current value (CM),
    or the value of unknown(1).
    The value of other(2) is returned if the interleave
    is known but not defined in the above list.
    See the associated conformance object for write
    conditions and limitations. See the reference for the FEC
    configuration described by the setting of this object.

    Parsed from file DOCS-IF-MIB.mib
    Module: DOCS-IF-MIB

    Description by cisco_v1

    The Forward Error Correction (FEC) interleaving used
    for this downstream channel.
    Values are defined as follows:
    taps8Increment16(3): protection 5.9/4.1 usec,
    latency .22/.15 msec
    taps16Increment8(4): protection 12/8.2 usec,
    latency .48/.33 msec
    taps32Increment4(5): protection 24/16 usec,
    latency .98/.68 msec
    taps64Increment2(6): protection 47/33 usec,
    latency 2/1.4 msec
    taps128Increment1(7): protection 95/66 usec,
    latency 4/2.8 msec
    taps12increment17(8): protection 18/14 usec,
    latency 0.43/0.32 msec

    The value 'taps12increment17' is supported by EuroDOCSIS
    cable systems only, and the others by DOCSIS cable systems.

    If the interface is down, this object either returns
    the configured value (CMTS), the most current value (CM),
    or the value of unknown(1).
    The value of other(2) is returned if the interleave
    is known but not defined in the above list.
    See the associated conformance object for write
    conditions and limitations. See the reference for the FEC
    configuration described by the setting of this object.

    Description by oid_info

    docsIfDownChannelInterleave OBJECT-TYPE
    SYNTAX INTEGER {
    unknown(1),
    other(2),
    taps8Increment16(3),
    taps16Increment8(4),
    taps32Increment4(5),
    taps64Increment2(6),
    taps128Increment1(7)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The Forward Error Correction (FEC) interleaving used
    for this downstream channel.
    Values are defined as follows:
    taps8Increment16(3): protection 5.9/4.1 usec,
    latency .22/.15 msec
    taps16Increment8(4): protection 12/8.2 usec,
    latency .48/.33 msec
    taps32Increment4(5): protection 24/16 usec,
    latency .98/.68 msec
    taps64Increment2(6): protection 47/33 usec,
    latency 2/1.4 msec
    taps128Increment1(7): protection 95/66 usec,
    latency 4/2.8 msec
    If the interface is down, this object either returns
    the configured value (CMTS), the most current value (CM),
    or the value of unknown(1).
    The value of other(2) is returned if the interleave
    is known but not defined in the above list.
    See the associated conformance object for write
    conditions and limitations. See the reference for the FEC
    configuration described by the setting of this object."
    REFERENCE
    "DOCSIS Radio Frequency Interface Specification,
    Section 4.3.2."
    View at oid-info.com

    Description by mibdepot

    The Forward Error Correction (FEC) interleaving used
    for this downstream channel.
    Values are defined as follows:
    taps8Increment16(3): protection 5.9/4.1 usec,
    latency .22/.15 msec
    taps16Increment8(4): protection 12/8.2 usec,
    latency .48/.33 msec
    taps32Increment4(5): protection 24/16 usec,
    latency .98/.68 msec
    taps64Increment2(6): protection 47/33 usec,
    latency 2/1.4 msec
    taps128Increment1(7): protection 95/66 usec,
    latency 4/2.8 msec
    If the interface is down, this object either returns
    the configured value (CMTS), the most current value (CM),
    or the value of unknown(1).
    The value of other(2) is returned if the interleave
    is known but not defined in the above list.
    See the associated conformance object for write
    conditions and limitations. See the reference for the FEC
    configuration described by the setting of this object.

    Parsed from file DOCS-IF-MIB.txt
    Company: None
    Module: DOCS-IF-MIB

    Description by cisco

    The Forward Error Correction (FEC) interleaving used
    for this downstream channel.
    Values are defined as follows:
    taps8Increment16(3): protection 5.9/4.1 usec,
    latency .22/.15 msec
    taps16Increment8(4): protection 12/8.2 usec,
    latency .48/.33 msec
    taps32Increment4(5): protection 24/16 usec,
    latency .98/.68 msec
    taps64Increment2(6): protection 47/33 usec,
    latency 2/1.4 msec
    taps128Increment1(7): protection 95/66 usec,
    latency 4/2.8 msec
    taps12increment17(8): protection 18/14 usec,
    latency 0.43/0.32 msec

    The value 'taps12increment17' is supported by EuroDOCSIS
    cable systems only, and the others by DOCSIS cable systems.

    If the interface is down, this object either returns
    the configured value (CMTS), the most current value (CM),
    or the value of unknown(1).
    The value of other(2) is returned if the interleave
    is known but not defined in the above list.
    See the associated conformance object for write
    conditions and limitations. See the reference for the FEC
    configuration described by the setting of this object.

    Information by circitor

    docsIfDownChannelInterleave OBJECT-TYPE
    SYNTAX INTEGER {
        unknown(1),
        other(2),
        taps8Increment16(3),
        taps16Increment8(4),
        taps32Increment4(5),
        taps64Increment2(6),
        taps128Increment1(7),
        taps12increment17(8)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The Forward Error Correction (FEC) interleaving used
         for this downstream channel.
         Values are defined as follows:
         taps8Increment16(3):   protection 5.9/4.1 usec,
                                latency .22/.15 msec
         taps16Increment8(4):   protection 12/8.2 usec,
                                latency .48/.33 msec
         taps32Increment4(5):   protection 24/16 usec,
                                latency .98/.68 msec
         taps64Increment2(6):   protection 47/33 usec,
                                latency 2/1.4 msec
         taps128Increment1(7):  protection 95/66 usec,
                                latency 4/2.8 msec
         taps12increment17(8):  protection 18/14 usec,
                                latency 0.43/0.32 msec
        
        The value 'taps12increment17' is supported by EuroDOCSIS
        cable systems only, and the others by DOCSIS cable systems.
        
         If the interface is down, this object either returns
         the configured value (CMTS), the most current value (CM),
         or the value of unknown(1).
         The value of other(2) is returned if the interleave
         is known but not defined in the above list.
         See the associated conformance object for write
         conditions and limitations.  See the reference for the FEC
         configuration described by the setting of this object."
    REFERENCE
        "Data-Over-Cable Service Interface Specifications: Radio
         Frequency Interface Specification SP-RFIv2.0-I10-051209,
         Table 6-15."
    ::= { docsIfDownstreamChannelEntry 5 }

    Information by cisco_v1

    docsIfDownChannelInterleave OBJECT-TYPE
    SYNTAX INTEGER {
        unknown(1),
        other(2),
        taps8Increment16(3),
        taps16Increment8(4),
        taps32Increment4(5),
        taps64Increment2(6),
        taps128Increment1(7),
        taps12increment17(8)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The Forward Error Correction (FEC) interleaving used
         for this downstream channel.
         Values are defined as follows:
         taps8Increment16(3):   protection 5.9/4.1 usec,
                                latency .22/.15 msec
         taps16Increment8(4):   protection 12/8.2 usec,
                                latency .48/.33 msec
         taps32Increment4(5):   protection 24/16 usec,
                                latency .98/.68 msec
         taps64Increment2(6):   protection 47/33 usec,
                                latency 2/1.4 msec
         taps128Increment1(7):  protection 95/66 usec,
                                latency 4/2.8 msec
         taps12increment17(8):  protection 18/14 usec,
                                latency 0.43/0.32 msec
        
        The value 'taps12increment17' is supported by EuroDOCSIS
        cable systems only, and the others by DOCSIS cable systems.
        
         If the interface is down, this object either returns
         the configured value (CMTS), the most current value (CM),
         or the value of unknown(1).
         The value of other(2) is returned if the interleave
         is known but not defined in the above list.
         See the associated conformance object for write
         conditions and limitations.  See the reference for the FEC
         configuration described by the setting of this object."
    REFERENCE
        "Data-Over-Cable Service Interface Specifications: Radio
         Frequency Interface Specification SP-RFIv2.0-I10-051209,
         Table 6-15."
    ::= { docsIfDownstreamChannelEntry 5 }

    Information by oid_info

    Automatically extracted from RFC2670

    Information by mibdepot

    docsIfDownChannelInterleave OBJECT-TYPE
        SYNTAX      INTEGER {
            unknown(1),


            other(2),
            taps8Increment16(3),
            taps16Increment8(4),
            taps32Increment4(5),
            taps64Increment2(6),
            taps128Increment1(7)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The Forward Error Correction (FEC) interleaving used
             for this downstream channel.
             Values are defined as follows:
             taps8Increment16(3):   protection 5.9/4.1 usec,
                                    latency .22/.15 msec
             taps16Increment8(4):   protection 12/8.2 usec,
                                    latency .48/.33 msec
             taps32Increment4(5):   protection 24/16 usec,
                                    latency .98/.68 msec
             taps64Increment2(6):   protection 47/33 usec,
                                    latency 2/1.4 msec
             taps128Increment1(7):  protection 95/66 usec,
                                    latency 4/2.8 msec
             If the interface is down, this object either returns
             the configured value (CMTS), the most current value (CM),
             or the value of unknown(1).
             The value of other(2) is returned if the interleave
             is known but not defined in the above list.
             See the associated conformance object for write
             conditions and limitations. See the reference for the FEC
             configuration described by the setting of this object."
        REFERENCE
            "DOCSIS Radio Frequency Interface Specification,
             Section 4.3.2."
        ::= { docsIfDownstreamChannelEntry 5 }

    Information by cisco

    docsIfDownChannelInterleave OBJECT-TYPE
        SYNTAX      INTEGER {
            unknown(1),
            other(2),
            taps8Increment16(3),
            taps16Increment8(4),
            taps32Increment4(5),
            taps64Increment2(6),
            taps128Increment1(7),
            taps12increment17(8)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The Forward Error Correction (FEC) interleaving used
             for this downstream channel.
             Values are defined as follows:
             taps8Increment16(3):   protection 5.9/4.1 usec,
                                    latency .22/.15 msec
             taps16Increment8(4):   protection 12/8.2 usec,
                                    latency .48/.33 msec
             taps32Increment4(5):   protection 24/16 usec,
                                    latency .98/.68 msec
             taps64Increment2(6):   protection 47/33 usec,
                                    latency 2/1.4 msec
             taps128Increment1(7):  protection 95/66 usec,
                                    latency 4/2.8 msec
             taps12increment17(8):  protection 18/14 usec,
                                    latency 0.43/0.32 msec

            The value 'taps12increment17' is supported by EuroDOCSIS
            cable systems only, and the others by DOCSIS cable systems.

             If the interface is down, this object either returns
             the configured value (CMTS), the most current value (CM),
             or the value of unknown(1).
             The value of other(2) is returned if the interleave
             is known but not defined in the above list.
             See the associated conformance object for write
             conditions and limitations.  See the reference for the FEC
             configuration described by the setting of this object."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I10-051209,
             Table 6-15."
        ::= { docsIfDownstreamChannelEntry 5 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (7)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.127.1.1.1.1.1 docsIfDownChannelId 0 0 The Cable Modem Termination System identification of the
    downstream channel within this particular MAC interface.
    if the interfac…
    1.3.6.1.2.1.10.127.1.1.1.1.2 docsIfDownChannelFrequency 0 0 The center of the downstream frequency associated with
    this channel. This object will return the current tuner
    frequency. If a …
    1.3.6.1.2.1.10.127.1.1.1.1.3 docsIfDownChannelWidth 0 0 The bandwidth of this downstream channel. Most
    implementations are expected to support a channel width
    of 6 MHz (North America) a…
    1.3.6.1.2.1.10.127.1.1.1.1.4 docsIfDownChannelModulation 0 0 The modulation type associated with this downstream
    channel. If the interface is down, this object either
    returns the configured …
    1.3.6.1.2.1.10.127.1.1.1.1.6 docsIfDownChannelPower 0 0 At the CMTS, the operational transmit power. At the CM,
    the received power level.
    If the interface is down, this object either r…
    1.3.6.1.2.1.10.127.1.1.1.1.7 docsIfDownChannelAnnex 0 0 The value of this object indicates the conformance of
    the implementation to important regional cable standards.
    annexA : Annex A …
    1.3.6.1.2.1.10.127.1.1.1.1.8 docsIfDownChannelStorageType 0 0 The storage type for this conceptual row.
    Entries with this object set to permanent(4)
    do not require write operations for read-w…