Describes the attributes for a single class of service.
If implemented as read-create in the Cable Modem
Termination System, creation of entries in this table is
controlled by the value of
docsIfCmtsQosProfilePermissions.
If implemented as read-only, entries are created based
on information in REG-REQ MAC messages received from
cable modems (for Cable Modem Termination System), or
based on information extracted from the TFTP option file
(for Cable Modem).
In the Cable Modem Termination System, read-only entries
are removed if no longer referenced by
docsIfCmtsServiceTable.
An entry in this table MUST not be removed while it is
referenced by an entry in docsIfCmServiceTable (Cable
Modem) or docsIfCmtsServiceTable (Cable Modem Termination
System).
An entry in this table SHOULD NOT be changeable while
it is referenced by an entry in docsIfCmtsServiceTable.
If this table is created automatically, there SHOULD only
be a single entry for each Class of Service. Multiple
entries with the same Class of Service parameters are NOT
RECOMMENDED.
Parsed from file DOCS-IF-MIB.mib
Module: DOCS-IF-MIB
Describes the attributes for a single class of service.
If implemented as read-create in the Cable Modem
Termination System, creation of entries in this table is
controlled by the value of
docsIfCmtsQosProfilePermissions.
If implemented as read-only, entries are created based
on information in REG-REQ MAC messages received from
cable modems (for Cable Modem Termination System), or
based on information extracted from the TFTP option file
(for Cable Modem).
In the Cable Modem Termination System, read-only entries
are removed if no longer referenced by
docsIfCmtsServiceTable.
An entry in this table MUST not be removed while it is
referenced by an entry in docsIfCmServiceTable (Cable
Modem) or docsIfCmtsServiceTable (Cable Modem Termination
System).
An entry in this table SHOULD NOT be changeable while
it is referenced by an entry in docsIfCmtsServiceTable.
If this table is created automatically, there SHOULD only
be a single entry for each Class of Service. Multiple
entries with the same Class of Service parameters are NOT
RECOMMENDED.
docsIfQosProfileEntry OBJECT-TYPE
SYNTAX DocsIfQosProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the attributes for a single class of service.
If implemented as read-create in the Cable Modem
Termination System, creation of entries in this table is
controlled by the value of docsIfCmtsQosProfilePermissions.
If implemented as read-only, entries are created based
on information in REG-REQ MAC messages received from
Cable Modems (Cable Modem Termination System
implementation), or based on information extracted from
the TFTP option file (Cable Modem implementation).
In the Cable Modem Termination system, read-only entries
are removed if no longer referenced by
docsIfCmtsServiceTable.
An entry in this table must not be removed while it is
referenced by an entry in docsIfCmServiceTable (Cable Modem)
or docsIfCmtsServiceTable (Cable Modem Termination System).
An entry in this table should not be changeable while
it is referenced by an entry in docsIfCmtsServiceTable.
If this table is created automatically, there should only
be a single entry for each Class of Service. Multiple
entries with the same Class of Service parameters are not
recommended."
INDEX { docsIfQosProfIndex }
View at oid-info.com
Describes the attributes for a single class of service.
If implemented as read-create in the Cable Modem
Termination System, creation of entries in this table is
controlled by the value of docsIfCmtsQosProfilePermissions.
If implemented as read-only, entries are created based
on information in REG-REQ MAC messages received from
Cable Modems (Cable Modem Termination System
implementation), or based on information extracted from
the TFTP option file (Cable Modem implementation).
In the Cable Modem Termination system, read-only entries
are removed if no longer referenced by
docsIfCmtsServiceTable.
An entry in this table must not be removed while it is
referenced by an entry in docsIfCmServiceTable (Cable Modem)
or docsIfCmtsServiceTable (Cable Modem Termination System).
An entry in this table should not be changeable while
it is referenced by an entry in docsIfCmtsServiceTable.
If this table is created automatically, there should only
be a single entry for each Class of Service. Multiple
entries with the same Class of Service parameters are not
recommended.
Parsed from file DOCS-IF-MIB.txt
Company: None
Module: DOCS-IF-MIB
Describes the attributes for a single class of service.
If implemented as read-create in the Cable Modem
Termination System, creation of entries in this table is
controlled by the value of
docsIfCmtsQosProfilePermissions.
If implemented as read-only, entries are created based
on information in REG-REQ MAC messages received from
cable modems (for Cable Modem Termination System), or
based on information extracted from the TFTP option file
(for Cable Modem).
In the Cable Modem Termination System, read-only entries
are removed if no longer referenced by
docsIfCmtsServiceTable.
An entry in this table MUST not be removed while it is
referenced by an entry in docsIfCmServiceTable (Cable
Modem) or docsIfCmtsServiceTable (Cable Modem Termination
System).
An entry in this table SHOULD NOT be changeable while
it is referenced by an entry in docsIfCmtsServiceTable.
If this table is created automatically, there SHOULD only
be a single entry for each Class of Service. Multiple
entries with the same Class of Service parameters are NOT
RECOMMENDED.
docsIfQosProfileEntry OBJECT-TYPE SYNTAX DocsIfQosProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes the attributes for a single class of service. If implemented as read-create in the Cable Modem Termination System, creation of entries in this table is controlled by the value of docsIfCmtsQosProfilePermissions. If implemented as read-only, entries are created based on information in REG-REQ MAC messages received from cable modems (for Cable Modem Termination System), or based on information extracted from the TFTP option file (for Cable Modem). In the Cable Modem Termination System, read-only entries are removed if no longer referenced by docsIfCmtsServiceTable. An entry in this table MUST not be removed while it is referenced by an entry in docsIfCmServiceTable (Cable Modem) or docsIfCmtsServiceTable (Cable Modem Termination System). An entry in this table SHOULD NOT be changeable while it is referenced by an entry in docsIfCmtsServiceTable. If this table is created automatically, there SHOULD only be a single entry for each Class of Service. Multiple entries with the same Class of Service parameters are NOT RECOMMENDED." INDEX { docsIfQosProfIndex } ::= { docsIfQosProfileTable 1 }
docsIfQosProfileEntry OBJECT-TYPE SYNTAX DocsIfQosProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes the attributes for a single class of service. If implemented as read-create in the Cable Modem Termination System, creation of entries in this table is controlled by the value of docsIfCmtsQosProfilePermissions. If implemented as read-only, entries are created based on information in REG-REQ MAC messages received from cable modems (for Cable Modem Termination System), or based on information extracted from the TFTP option file (for Cable Modem). In the Cable Modem Termination System, read-only entries are removed if no longer referenced by docsIfCmtsServiceTable. An entry in this table MUST not be removed while it is referenced by an entry in docsIfCmServiceTable (Cable Modem) or docsIfCmtsServiceTable (Cable Modem Termination System). An entry in this table SHOULD NOT be changeable while it is referenced by an entry in docsIfCmtsServiceTable. If this table is created automatically, there SHOULD only be a single entry for each Class of Service. Multiple entries with the same Class of Service parameters are NOT RECOMMENDED." INDEX { docsIfQosProfIndex } ::= { docsIfQosProfileTable 1 }
Automatically extracted from RFC2670
docsIfQosProfileEntry OBJECT-TYPE SYNTAX DocsIfQosProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Describes the attributes for a single class of service. If implemented as read-create in the Cable Modem Termination System, creation of entries in this table is controlled by the value of docsIfCmtsQosProfilePermissions. If implemented as read-only, entries are created based on information in REG-REQ MAC messages received from Cable Modems (Cable Modem Termination System implementation), or based on information extracted from the TFTP option file (Cable Modem implementation). In the Cable Modem Termination system, read-only entries are removed if no longer referenced by docsIfCmtsServiceTable. An entry in this table must not be removed while it is referenced by an entry in docsIfCmServiceTable (Cable Modem) or docsIfCmtsServiceTable (Cable Modem Termination System). An entry in this table should not be changeable while it is referenced by an entry in docsIfCmtsServiceTable. If this table is created automatically, there should only be a single entry for each Class of Service. Multiple entries with the same Class of Service parameters are not recommended." INDEX { docsIfQosProfIndex } ::= { docsIfQosProfileTable 1 }
docsIfQosProfileEntry OBJECT-TYPE SYNTAX DocsIfQosProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Describes the attributes for a single class of service. If implemented as read-create in the Cable Modem Termination System, creation of entries in this table is controlled by the value of docsIfCmtsQosProfilePermissions. If implemented as read-only, entries are created based on information in REG-REQ MAC messages received from cable modems (for Cable Modem Termination System), or based on information extracted from the TFTP option file (for Cable Modem). In the Cable Modem Termination System, read-only entries are removed if no longer referenced by docsIfCmtsServiceTable. An entry in this table MUST not be removed while it is referenced by an entry in docsIfCmServiceTable (Cable Modem) or docsIfCmtsServiceTable (Cable Modem Termination System). An entry in this table SHOULD NOT be changeable while it is referenced by an entry in docsIfCmtsServiceTable. If this table is created automatically, there SHOULD only be a single entry for each Class of Service. Multiple entries with the same Class of Service parameters are NOT RECOMMENDED." INDEX { docsIfQosProfIndex } ::= { docsIfQosProfileTable 1 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.127.1.1.3.1.1 | docsIfQosProfIndex | 0 | 0 | The index value that uniquely identifies an entry in the docsIfQosProfileTable. |
1.3.6.1.2.1.10.127.1.1.3.1.2 | docsIfQosProfPriority | 0 | 0 | A relative priority assigned to this service when allocating bandwidth. Zero indicates lowest priority and seven indicates highe… |
1.3.6.1.2.1.10.127.1.1.3.1.3 | docsIfQosProfMaxUpBandwidth | 0 | 0 | The maximum upstream bandwidth, in bits per second, allowed for a service with this service class. Zero if there is no restrictio… |
1.3.6.1.2.1.10.127.1.1.3.1.4 | docsIfQosProfGuarUpBandwidth | 0 | 0 | Minimum guaranteed upstream bandwidth, in bits per second, allowed for a service with this service class. MUST NOT be changed whi… |
1.3.6.1.2.1.10.127.1.1.3.1.5 | docsIfQosProfMaxDownBandwidth | 0 | 0 | The maximum downstream bandwidth, in bits per second, allowed for a service with this service class. Zero if there is no restrict… |
1.3.6.1.2.1.10.127.1.1.3.1.6 | docsIfQosProfMaxTxBurst | 0 | 0 | The maximum number of mini-slots that may be requested for a single upstream transmission. A value of zero means there is no limi… |
1.3.6.1.2.1.10.127.1.1.3.1.7 | docsIfQosProfBaselinePrivacy | 0 | 0 | Indicates whether Baseline Privacy is enabled for this service class. MUST NOT be changed while this row is active. |
1.3.6.1.2.1.10.127.1.1.3.1.8 | docsIfQosProfStatus | 0 | 0 | This is object is used to create or delete rows in this table. This object MUST NOT be changed from active while the row is refe… |
1.3.6.1.2.1.10.127.1.1.3.1.9 | docsIfQosProfMaxTransmitBurst | 0 | 0 | The maximum number of bytes that may be requested for a single upstream transmission. A value of zero means there is no limit. … |
1.3.6.1.2.1.10.127.1.1.3.1.10 | docsIfQosProfStorageType | 0 | 0 | The storage type for this conceptual row. Entries with this object set to permanent(4) do not require write operations for writab… |