Reference record for OID 1.3.6.1.2.1.10.127.1.1.4.1.5



parent
1.3.6.1.2.1.10.127.1.1.4.1 (docsIfSignalQualityEntry)
node code
5
node name
docsIfSigQSignalNoise
dot oid
1.3.6.1.2.1.10.127.1.1.4.1.5
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfBaseObjects(1) docsIfSignalQualityTable(4) docsIfSignalQualityEntry(1) docsIfSigQSignalNoise(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfBaseObjects(1) docsIfSignalQualityTable(4) docsIfSignalQualityEntry(1) docsIfSigQSignalNoise(5)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfBaseObjects(1) docsIfSignalQualityTable(4) docsIfSignalQualityEntry(1) docsIfSigQSignalNoise(5)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfBaseObjects(1) docsIfSignalQualityTable(4) docsIfSignalQualityEntry(1) docsIfSigQSignalNoise(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfBaseObjects(1) docsIfSignalQualityTable(4) docsIfSignalQualityEntry(1) docsIfSigQSignalNoise(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfBaseObjects(1) docsIfSignalQualityTable(4) docsIfSignalQualityEntry(1) docsIfSigQSignalNoise(5)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/docsIfMib/docsIfMibObjects/docsIfBaseObjects/docsIfSignalQualityTable/docsIfSignalQualityEntry/docsIfSigQSignalNoise
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/docsIfMib/docsIfMibObjects/docsIfBaseObjects/docsIfSignalQualityTable/docsIfSignalQualityEntry/docsIfSigQSignalNoise
  • /iso/org/dod/internet/mgmt/mib-2/transmission/docsIfMib/docsIfMibObjects/docsIfBaseObjects/docsIfSignalQualityTable/docsIfSignalQualityEntry/docsIfSigQSignalNoise
  • /iso/org/dod/internet/mgmt/mib/transmission/docsIfMib/docsIfMibObjects/docsIfBaseObjects/docsIfSignalQualityTable/docsIfSignalQualityEntry/docsIfSigQSignalNoise
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/docsIfMib/docsIfMibObjects/docsIfBaseObjects/docsIfSignalQualityTable/docsIfSignalQualityEntry/docsIfSigQSignalNoise
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/docsIfMib/docsIfMibObjects/docsIfBaseObjects/docsIfSignalQualityTable/docsIfSignalQualityEntry/docsIfSigQSignalNoise
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/10/127/1/1/4/1/5

    Description by circitor

    Signal/Noise ratio as perceived for this channel.
    At the CM, this object describes the Signal/Noise of the
    downstream channel. At the CMTS, it describes the
    average Signal/Noise of the upstream channel.

    Parsed from file DOCS-IF-MIB.mib
    Module: DOCS-IF-MIB

    Description by cisco_v1

    Signal/Noise ratio as perceived for this channel.
    At the CM, this object describes the Signal/Noise of the
    downstream channel. At the CMTS, it describes the
    average Signal/Noise of the upstream channel.

    Description by oid_info

    docsIfSigQSignalNoise OBJECT-TYPE
    SYNTAX TenthdB
    UNITS "dB"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Signal/Noise ratio as perceived for this channel.
    At the CM, describes the Signal/Noise of the downstream
    channel. At the CMTS, describes the average Signal/Noise
    of the upstream channel."
    REFERENCE
    "DOCSIS Radio Frequency Interface specification,
    Table 2-1 and 2-2"
    View at oid-info.com

    Description by mibdepot

    Signal/Noise ratio as perceived for this channel.
    At the CM, describes the Signal/Noise of the downstream
    channel. At the CMTS, describes the average Signal/Noise
    of the upstream channel.

    Parsed from file DOCS-IF-MIB.txt
    Company: None
    Module: DOCS-IF-MIB

    Description by cisco

    Signal/Noise ratio as perceived for this channel.
    At the CM, this object describes the Signal/Noise of the
    downstream channel. At the CMTS, it describes the
    average Signal/Noise of the upstream channel.

    Information by circitor

    docsIfSigQSignalNoise OBJECT-TYPE
    SYNTAX TenthdB



    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Signal/Noise ratio as perceived for this channel.
         At the CM, this object  describes the Signal/Noise of the
         downstream channel.  At the CMTS, it describes the
         average Signal/Noise of the upstream channel."
    REFERENCE
        "Data-Over-Cable Service Interface Specifications: Radio
         Frequency Interface Specification SP-RFIv2.0-I10-051209,
         Tables 4-1 and 4-2"
    ::= { docsIfSignalQualityEntry 5 }

    Information by cisco_v1

    docsIfSigQSignalNoise OBJECT-TYPE
    SYNTAX TenthdB



    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Signal/Noise ratio as perceived for this channel.
         At the CM, this object  describes the Signal/Noise of the
         downstream channel.  At the CMTS, it describes the
         average Signal/Noise of the upstream channel."
    REFERENCE
        "Data-Over-Cable Service Interface Specifications: Radio
         Frequency Interface Specification SP-RFIv2.0-I10-051209,
         Tables 4-1 and 4-2"
    ::= { docsIfSignalQualityEntry 5 }

    Information by oid_info

    Automatically extracted from RFC2670

    Information by mibdepot

    docsIfSigQSignalNoise OBJECT-TYPE
        SYNTAX      TenthdB
        UNITS       "dB"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Signal/Noise ratio as perceived for this channel.
             At the CM, describes the Signal/Noise of the downstream
             channel.  At the CMTS, describes the average Signal/Noise
             of the upstream channel."
        REFERENCE
            "DOCSIS Radio Frequency Interface specification,
             Table 2-1 and 2-2"
        ::= { docsIfSignalQualityEntry 5 }

    Information by cisco

    docsIfSigQSignalNoise OBJECT-TYPE
        SYNTAX      TenthdB
        UNITS       "TenthdB"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Signal/Noise ratio as perceived for this channel.
             At the CM, this object  describes the Signal/Noise of the
             downstream channel.  At the CMTS, it describes the
             average Signal/Noise of the upstream channel."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I10-051209,
             Tables 4-1 and 4-2"
        ::= { docsIfSignalQualityEntry 5 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (9)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.127.1.1.4.1.1 docsIfSigQIncludesContention 0 0 true(1) if this CMTS includes contention intervals in
    the counters in this table. Always false(2) for CMs.
    1.3.6.1.2.1.10.127.1.1.4.1.2 docsIfSigQUnerroreds 0 0 Codewords received on this channel without error.
    This includes all codewords, whether or not they
    were part of frames destined f…
    1.3.6.1.2.1.10.127.1.1.4.1.3 docsIfSigQCorrecteds 0 0 Codewords received on this channel with correctable
    errors. This includes all codewords, whether or not
    they were part of frames …
    1.3.6.1.2.1.10.127.1.1.4.1.4 docsIfSigQUncorrectables 0 0 Codewords received on this channel with uncorrectable
    errors. This includes all codewords, whether or not
    they were part of frame…
    1.3.6.1.2.1.10.127.1.1.4.1.6 docsIfSigQMicroreflections 0 0 Microreflections, including in-channel response
    as perceived on this interface, measured in dBc below
    the signal level.
    This objec…
    1.3.6.1.2.1.10.127.1.1.4.1.7 docsIfSigQEqualizationData 0 0 At the CM, returns the equalization data for the downstream
    channel. At the CMTS, returns the average equalization
    data for the u…
    1.3.6.1.2.1.10.127.1.1.4.1.8 docsIfSigQExtUnerroreds 0 0 Codewords received on this channel without error.
    This includes all codewords, whether or not they
    were part of frames destined f…
    1.3.6.1.2.1.10.127.1.1.4.1.9 docsIfSigQExtCorrecteds 0 0 Codewords received on this channel with correctable
    errors. This includes all codewords, whether or not
    they were part of frames…
    1.3.6.1.2.1.10.127.1.1.4.1.10 docsIfSigQExtUncorrectables 0 0 Codewords received on this channel with uncorrectable
    errors. This includes all codewords, whether or not
    they were part of fram…