Indicates modulation type currently used by the CM. Since
this object specifically identifies PHY mode, the shared
type is not permitted. If the upstream channel is
unknown, this object returns a value of zero.
Parsed from file DOCS-IF-MIB.mib
Module: DOCS-IF-MIB
Indicates modulation type currently used by the CM. Since
this object specifically identifies PHY mode, the shared
type is not permitted. If the upstream channel is
unknown, this object returns a value of zero.
docsIfCmtsCmStatusModulationType OBJECT-TYPE
SYNTAX DocsisUpstreamTypeStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates modulation type currently used by the CM. Since
this object specifically identifies PHY mode, the shared
type is not permitted."
REFERENCE
"Document [25] from References, Table 8-19."
View at oid-info.com
Indicates modulation type currently used by the CM. Since
this object specifically identifies PHY mode, the shared
type is not permitted. If the upstream channel is
unknown, this object returns a value of zero.
Parsed from file DOCS-IF-MIB.txt
Company: None
Module: DOCS-IF-MIB
Indicates modulation type currently used by the CM. Since
this object specifically identifies PHY mode, the shared
type is not permitted. If the upstream channel is
unknown, this object returns a value of zero.
docsIfCmtsCmStatusModulationType OBJECT-TYPE SYNTAX DocsisUpstreamType ACCESS read-only STATUS mandatory DESCRIPTION "Indicates modulation type currently used by the CM. Since this object specifically identifies PHY mode, the shared type is not permitted. If the upstream channel is unknown, this object returns a value of zero." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification SP-RFIv2.0-I10-051209, Table 8-19." ::= { docsIfCmtsCmStatusEntry 19 }
docsIfCmtsCmStatusModulationType OBJECT-TYPE SYNTAX DocsisUpstreamType ACCESS read-only STATUS mandatory DESCRIPTION "Indicates modulation type currently used by the CM. Since this object specifically identifies PHY mode, the shared type is not permitted. If the upstream channel is unknown, this object returns a value of zero." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification SP-RFIv2.0-I10-051209, Table 8-19." ::= { docsIfCmtsCmStatusEntry 19 }
Automatically extracted from Cisco "SNMP v2 MIBs".
docsIfCmtsCmStatusModulationType OBJECT-TYPE SYNTAX DocsisUpstreamType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates modulation type currently used by the CM. Since this object specifically identifies PHY mode, the shared type is not permitted. If the upstream channel is unknown, this object returns a value of zero." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification SP-RFIv2.0-I10-051209, Table 8-19." ::= { docsIfCmtsCmStatusEntry 19 }
docsIfCmtsCmStatusModulationType OBJECT-TYPE SYNTAX DocsisUpstreamType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates modulation type currently used by the CM. Since this object specifically identifies PHY mode, the shared type is not permitted. If the upstream channel is unknown, this object returns a value of zero." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification SP-RFIv2.0-I10-051209, Table 8-19." ::= { docsIfCmtsCmStatusEntry 19 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.127.1.3.3.1.1 | docsIfCmtsCmStatusIndex | 0 | 0 | Index value to uniquely identify an entry in this table. For an individual cable modem, this index value SHOULD NOT change during… |
1.3.6.1.2.1.10.127.1.3.3.1.2 | docsIfCmtsCmStatusMacAddress | 0 | 0 | MAC address of the cable modem. If the cable modem has multiple MAC addresses, this is the MAC address associated with the Cable… |
1.3.6.1.2.1.10.127.1.3.3.1.3 | docsIfCmtsCmStatusIpAddress | 0 | 0 | IP address of this Cable Modem. If the Cable Modem has no IP address assigned, or the IP address is unknown, this object returns … |
1.3.6.1.2.1.10.127.1.3.3.1.4 | docsIfCmtsCmStatusDownChannelIfIndex | 0 | 0 | IfIndex of the downstream channel this CM is connected to. If the downstream channel is unknown, this object returns a value of z… |
1.3.6.1.2.1.10.127.1.3.3.1.5 | docsIfCmtsCmStatusUpChannelIfIndex | 0 | 0 | IfIndex of the upstream channel this CM is connected to. If the upstream channel is unknown, this object returns a value of zero. |
1.3.6.1.2.1.10.127.1.3.3.1.6 | docsIfCmtsCmStatusRxPower | 0 | 0 | The receive power as perceived for upstream data from this cable modem. If the receive power is unknown, this object returns a val… |
1.3.6.1.2.1.10.127.1.3.3.1.7 | docsIfCmtsCmStatusTimingOffset | 0 | 0 | A measure of the current round trip time for this CM. Used for timing of CM upstream transmissions to ensure synchronized arrival… |
1.3.6.1.2.1.10.127.1.3.3.1.8 | docsIfCmtsCmStatusEqualizationData | 0 | 0 | Equalization data for this CM. Returns an empty string if the value is unknown or if there is no equalization data available or d… |
1.3.6.1.2.1.10.127.1.3.3.1.9 | docsIfCmtsCmStatusValue | 0 | 0 | Current Cable Modem connectivity state, as specified in the RF Interface Specification. Returned status information is the CM sta… |
1.3.6.1.2.1.10.127.1.3.3.1.10 | docsIfCmtsCmStatusUnerroreds | 0 | 0 | Codewords received without error from this Cable Modem. |
1.3.6.1.2.1.10.127.1.3.3.1.11 | docsIfCmtsCmStatusCorrecteds | 0 | 0 | Codewords received with correctable errors from this Cable Modem. |
1.3.6.1.2.1.10.127.1.3.3.1.12 | docsIfCmtsCmStatusUncorrectables | 0 | 0 | Codewords received with uncorrectable errors from this Cable Modem. |
1.3.6.1.2.1.10.127.1.3.3.1.13 | docsIfCmtsCmStatusSignalNoise | 0 | 0 | Signal/Noise ratio as perceived for upstream data from this cable modem. If the Signal/Noise is unknown, this object returns a val… |
1.3.6.1.2.1.10.127.1.3.3.1.14 | docsIfCmtsCmStatusMicroreflections | 0 | 0 | Total microreflections including in-channel response as perceived on this interface, measured in dBc below the signal level. This … |
1.3.6.1.2.1.10.127.1.3.3.1.15 | docsIfCmtsCmStatusExtUnerroreds | 0 | 0 | docsIfCmtsCmStatusExtUnerroreds OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Codewords receive… |
1.3.6.1.2.1.10.127.1.3.3.1.16 | docsIfCmtsCmStatusExtCorrecteds | 0 | 0 | docsIfCmtsCmStatusExtCorrecteds OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Codewords receive… |
1.3.6.1.2.1.10.127.1.3.3.1.17 | docsIfCmtsCmStatusExtUncorrectables | 0 | 0 | docsIfCmtsCmStatusExtUncorrectables OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Codewords rec… |
1.3.6.1.2.1.10.127.1.3.3.1.18 | docsIfCmtsCmStatusDocsisRegMode | 0 | 0 | Indication of whether the CM has registered using 1.0 Class of Service or 1.1 Quality of Service. |
1.3.6.1.2.1.10.127.1.3.3.1.20 | docsIfCmtsCmStatusInetAddressType | 0 | 0 | The type of internet address of docsIfCmtsCmStatusInetAddress. If the cable modem internet address is unassigned or unknown, the… |
1.3.6.1.2.1.10.127.1.3.3.1.21 | docsIfCmtsCmStatusInetAddress | 0 | 0 | Internet address of this cable modem. If the Cable Modem has no Internet address assigned, or the Internet address is unknown, t… |
1.3.6.1.2.1.10.127.1.3.3.1.22 | docsIfCmtsCmStatusValueLastUpdate | 0 | 0 | The value of sysUpTime when docsIfCmtsCmStatusValue was last updated. |
1.3.6.1.2.1.10.127.1.3.3.1.23 | docsIfCmtsCmStatusHighResolutionTimingOffset | 0 | 0 | A measure of the current round trip time for this CM. Used for timing of CM upstream transmissions to ensure synchronized arrival… |