Denotes the interval in seconds, at which the route max threshold
notification may be reissued after the maximum value has been
exceeded (or has been reached if mplsL3VpnVrfConfMaxRoutes and
mplsL3VpnVrfConfHighRteThresh are equal) and the initial
notification has been issued. This value is intended to prevent
continuous generation of notifications by an agent in the event
that routes are continually added to a VRF after it has reached
its maximum value. If this value is set to 0, the agent should
only issue a single notification at the time that the maximum
threshold has been reached, and should not issue any more
notifications until the value of routes has fallen below the
configured threshold value. This is the recommended default
behavior.
Parsed from file MPLS-L3VPN-STD-MIB.mib
Module: MPLS-L3VPN-STD-MIB
Denotes the interval in seconds, at which the route max threshold
notification may be reissued after the maximum value has been
exceeded (or has been reached if mplsL3VpnVrfConfMaxRoutes and
mplsL3VpnVrfConfHighRteThresh are equal) and the initial
notification has been issued. This value is intended to prevent
continuous generation of notifications by an agent in the event
that routes are continually added to a VRF after it has reached
its maximum value. If this value is set to 0, the agent should
only issue a single notification at the time that the maximum
threshold has been reached, and should not issue any more
notifications until the value of routes has fallen below the
configured threshold value. This is the recommended default
behavior.
mplsL3VpnVrfConfRteMxThrshtime
View at oid-info.com
Denotes the interval in seconds, at which the route max threshold
notification may be reissued after the maximum value has been
exceeded (or has been reached if mplsL3VpnVrfConfMaxRoutes and
mplsL3VpnVrfConfHighRteThresh are equal) and the initial
notification has been issued. This value is intended to prevent
continuous generation of notifications by an agent in the event
that routes are continually added to a VRF after it has reached
its maximum value. If this value is set to 0, the agent should
only issue a single notification at the time that the maximum
threshold has been reached, and should not issue any more
notifications until the value of routes has fallen below the
configured threshold value. This is the recommended default
behavior.
Parsed from file rfc4382-MPLS__BGP-Layer-3-Virtual-Private-Network-VPN.mib.txt
Company: None
Module: MPLS-L3VPN-STD-MIB
Denotes the interval in seconds, at which the route max threshold
notification may be reissued after the maximum value has been
exceeded (or has been reached if mplsL3VpnVrfConfMaxRoutes and
mplsL3VpnVrfConfHighRteThresh are equal) and the initial
notification has been issued. This value is intended to prevent
continuous generation of notifications by an agent in the event
that routes are continually added to a VRF after it has reached
its maximum value. If this value is set to 0, the agent should
only issue a single notification at the time that the maximum
threshold has been reached, and should not issue any more
notifications until the value of routes has fallen below the
configured threshold value. This is the recommended default
behavior.
mplsL3VpnVrfConfRteMxThrshTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes the interval in seconds, at which the route max threshold notification may be reissued after the maximum value has been exceeded (or has been reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued. This value is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added to a VRF after it has reached its maximum value. If this value is set to 0, the agent should only issue a single notification at the time that the maximum threshold has been reached, and should not issue any more notifications until the value of routes has fallen below the configured threshold value. This is the recommended default behavior." DEFVAL { 0 } ::= { mplsL3VpnScalars 6 }
mplsL3VpnVrfConfRteMxThrshTime OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Denotes the interval in seconds, at which the route max threshold notification may be reissued after the maximum value has been exceeded (or has been reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued. This value is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added to a VRF after it has reached its maximum value. If this value is set to 0, the agent should only issue a single notification at the time that the maximum threshold has been reached, and should not issue any more notifications until the value of routes has fallen below the configured threshold value. This is the recommended default behavior." DEFVAL { 0 } ::= { mplsL3VpnScalars 6 }
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
mplsL3VpnVrfConfRteMxThrshTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes the interval in seconds, at which the route max threshold notification may be reissued after the maximum value has been exceeded (or has been reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued. This value is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added to a VRF after it has reached its maximum value. If this value is set to 0, the agent should only issue a single notification at the time that the maximum threshold has been reached, and should not issue any more notifications until the value of routes has fallen below the configured threshold value. This is the recommended default behavior." DEFVAL { 0 } ::= { mplsL3VpnScalars 6 }
mplsL3VpnVrfConfRteMxThrshTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes the interval in seconds, at which the route max threshold notification may be reissued after the maximum value has been exceeded (or has been reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued. This value is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added to a VRF after it has reached its maximum value. If this value is set to 0, the agent should only issue a single notification at the time that the maximum threshold has been reached, and should not issue any more notifications until the value of routes has fallen below the configured threshold value. This is the recommended default behavior." DEFVAL { 0 } ::= { mplsL3VpnScalars 6 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.11.1.1.6.0 | mplsL3VpnVrfConfRteMxThrshTime | 0 | 0 | mplsL3VpnVrfConfRteMxThrshtime |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.11.1.1.1 | mplsL3VpnConfiguredVrfs | 1 | 1 | The number of VRFs that are configured on this node. |
| 1.3.6.1.2.1.10.166.11.1.1.2 | mplsL3VpnActiveVrfs | 1 | 1 | The number of VRFs that are active on this node. That is, those VRFs whose corresponding mplsL3VpnVrfOperStatus object value is e… |
| 1.3.6.1.2.1.10.166.11.1.1.3 | mplsL3VpnConnectedInterfaces | 1 | 1 | Total number of interfaces connected to a VRF. |
| 1.3.6.1.2.1.10.166.11.1.1.4 | mplsL3VpnNotificationEnable | 1 | 1 | If this object is true, then it enables the generation of all notifications defined in this MIB. This object's value should be pr… |
| 1.3.6.1.2.1.10.166.11.1.1.5 | mplsL3VpnVrfConfMaxPossRts | 1 | 1 | Denotes maximum number of routes that the device will allow all VRFs jointly to hold. If this value is set to 0, this indicates … |
| 1.3.6.1.2.1.10.166.11.1.1.7 | mplsL3VpnIllLblRcvThrsh | 1 | 1 | The number of illegally received labels above which the mplsNumVrfSecIllglLblThrshExcd notification is issued. The persistence o… |