The ifIndex value that identifies the local interface
through which the next hop of this route should be
reached. A value of 0 is valid and represents the
scenario where no interface is specified.
Parsed from file MPLS-L3VPN-STD-MIB.mib
Module: MPLS-L3VPN-STD-MIB
The ifIndex value that identifies the local interface
through which the next hop of this route should be
reached. A value of 0 is valid and represents the
scenario where no interface is specified.
The ifIndex value that identifies the local interface
through which the next hop of this route should be
reached. A value of 0 is valid and represents the
scenario where no interface is specified.
Parsed from file rfc4382-MPLS__BGP-Layer-3-Virtual-Private-Network-VPN.mib.txt
Company: None
Module: MPLS-L3VPN-STD-MIB
The ifIndex value that identifies the local interface
through which the next hop of this route should be
reached. A value of 0 is valid and represents the
scenario where no interface is specified.
mplsL3VpnVrfRteInetCidrIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified." DEFVAL { 0 } ::= { mplsL3VpnVrfRteEntry 7 }
mplsL3VpnVrfRteInetCidrIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero ACCESS read-write STATUS mandatory DESCRIPTION "The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified." DEFVAL { 0 } ::= { mplsL3VpnVrfRteEntry 7 }
Vendor: Cisco Systems
Module: MPLS-L3VPN-STD-MIB (MPLS-L3VPN-STD-MIB-V1SMI.my)
Type: TABULAR
Access: read-write
Syntax: InterfaceIndexOrZero
Automatically extracted from www.mibdepot.com
mplsL3VpnVrfRteInetCidrIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified." DEFVAL { 0 } ::= { mplsL3VpnVrfRteEntry 7 }
mplsL3VpnVrfRteInetCidrIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified." DEFVAL { 0 } ::= { mplsL3VpnVrfRteEntry 7 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.11.1.4.1.1.1 | mplsL3VpnVrfRteInetCidrDestType | 0 | 0 | The type of the mplsL3VpnVrfRteInetCidrDest address, as defined in the InetAddress MIB. Only those address types that may appear … |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.2 | mplsL3VpnVrfRteInetCidrDest | 0 | 0 | The destination IP address of this route. The type of this address is determined by the value of the mplsL3VpnVrfRteInetCidrDestT… |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.3 | mplsL3VpnVrfRteInetCidrPfxLen | 0 | 0 | Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compare… |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.4 | mplsL3VpnVrfRteInetCidrPolicy | 0 | 0 | This object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate… |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.5 | mplsL3VpnVrfRteInetCidrNHopType | 0 | 0 | The type of the mplsL3VpnVrfRteInetCidrNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for … |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.6 | mplsL3VpnVrfRteInetCidrNextHop | 0 | 0 | On remote routes, the address of the next system en route. For non-remote routes, a zero-length string. The type of this address… |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.8 | mplsL3VpnVrfRteInetCidrType | 0 | 0 | The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a r… |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.9 | mplsL3VpnVrfRteInetCidrProto | 0 | 0 | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to impl… |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.10 | mplsL3VpnVrfRteInetCidrAge | 0 | 0 | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too ol… |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.11 | mplsL3VpnVrfRteInetCidrNextHopAS | 0 | 0 | The Autonomous System Number of the next hop. The semantics of this object are determined by the routing protocol specified in t… |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.12 | mplsL3VpnVrfRteInetCidrMetric1 | 0 | 0 | The primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the … |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.13 | mplsL3VpnVrfRteInetCidrMetric2 | 0 | 0 | An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the… |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.14 | mplsL3VpnVrfRteInetCidrMetric3 | 0 | 0 | An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the… |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.15 | mplsL3VpnVrfRteInetCidrMetric4 | 0 | 0 | An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the… |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.16 | mplsL3VpnVrfRteInetCidrMetric5 | 0 | 0 | An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the… |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.17 | mplsL3VpnVrfRteXCPointer | 0 | 0 | Index into mplsXCTable that identifies which cross- connect entry is associated with this VRF route entry by containing the mplsX… |
| 1.3.6.1.2.1.10.166.11.1.4.1.1.18 | mplsL3VpnVrfRteInetCidrStatus | 0 | 0 | The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the stat… |