Reference record for OID 1.3.6.1.2.1.10.166.3.2.10


parent
1.3.6.1.2.1.10.166.3.2 (mplsTeObjects)
node code
10
node name
mplsTunnelCRLDPResTable
dot oid
1.3.6.1.2.1.10.166.3.2.10
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) mplsStdMIB(166) mplsTeStdMIB(3) mplsTeObjects(2) mplsTunnelCRLDPResTable(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) mplsStdMIB(166) mplsTeStdMIB(3) mplsTeObjects(2) mplsTunnelCRLDPResTable(10)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) mplsStdMIB(166) mplsTeStdMIB(3) mplsTeObjects(2) mplsTunnelCRLDPResTable(10)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) mplsStdMIB(166) mplsTeStdMIB(3) mplsTeObjects(2) mplsTunnelCRLDPResTable(10)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) mplsStdMIB(166) mplsTeStdMIB(3) mplsTeObjects(2) mplsTunnelCRLDPResTable(10)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) mplsStdMIB(166) mplsTeStdMIB(3) mplsTeObjects(2) mplsTunnelCRLDPResTable(10)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/mplsStdMIB/mplsTeStdMIB/mplsTeObjects/mplsTunnelCRLDPResTable
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/mplsStdMIB/mplsTeStdMIB/mplsTeObjects/mplsTunnelCRLDPResTable
  • /iso/org/dod/internet/mgmt/mib-2/transmission/mplsStdMIB/mplsTeStdMIB/mplsTeObjects/mplsTunnelCRLDPResTable
  • /iso/org/dod/internet/mgmt/mib/transmission/mplsStdMIB/mplsTeStdMIB/mplsTeObjects/mplsTunnelCRLDPResTable
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/mplsStdMIB/mplsTeStdMIB/mplsTeObjects/mplsTunnelCRLDPResTable
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/mplsStdMIB/mplsTeStdMIB/mplsTeObjects/mplsTunnelCRLDPResTable
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/10/166/3/2/10

    Description by circitor

    The mplsTunnelCRLDPResTable allows a manager to
    specify which CR-LDP-specific resources are desired
    for an MPLS tunnel if that tunnel is signaled using
    CR-LDP. Note that these attributes are in addition
    to those specified in mplsTunnelResourceTable. This
    table also allows several tunnels to point to a
    single entry in this table, implying that these
    tunnels should share resources.

    Parsed from file MPLS-TE-STD-MIB.mib
    Module: MPLS-TE-STD-MIB

    Description by cisco_v1

    The mplsTunnelCRLDPResTable allows a manager to
    specify which CR-LDP-specific resources are desired
    for an MPLS tunnel if that tunnel is signaled using
    CR-LDP. Note that these attributes are in addition
    to those specified in mplsTunnelResourceTable. This
    table also allows several tunnels to point to a
    single entry in this table, implying that these
    tunnels should share resources.

    Description by oid_info

    mplsTunnelCRLDPResTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MplsTunnelCRLDPResEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "The mplsTunnelCRLDPResTable allows a manager to
    specify which CR-LDP-specific resources are desired
    for an MPLS tunnel if that tunnel is signaled using
    CR-LDP. Note that these attributes are in addition
    to those specified in mplsTunnelResourceTable. This
    table also allows several tunnels to point to a
    single entry in this table, implying that these
    tunnels should share resources."
    View at oid-info.com

    Description by mibdepot

    The mplsTunnelCRLDPResTable allows a manager to
    specify which CR-LDP-specific resources are desired
    for an MPLS tunnel if that tunnel is signaled using
    CR-LDP. Note that these attributes are in addition
    to those specified in mplsTunnelResourceTable. This
    table also allows several tunnels to point to a
    single entry in this table, implying that these
    tunnels should share resources.

    Parsed from file rfc3812-MPLS-Traffic-Engineering-TE.mib.txt
    Company: None
    Module: MPLS-TE-STD-MIB

    Description by cisco

    The mplsTunnelCRLDPResTable allows a manager to
    specify which CR-LDP-specific resources are desired
    for an MPLS tunnel if that tunnel is signaled using
    CR-LDP. Note that these attributes are in addition
    to those specified in mplsTunnelResourceTable. This
    table also allows several tunnels to point to a
    single entry in this table, implying that these
    tunnels should share resources.

    Information by circitor

    mplsTunnelCRLDPResTable OBJECT-TYPE
   SYNTAX        SEQUENCE OF MplsTunnelCRLDPResEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "The mplsTunnelCRLDPResTable allows a manager to
          specify which CR-LDP-specific resources are desired
          for an MPLS tunnel if that tunnel is signaled using
          CR-LDP. Note that these attributes are in addition
          to those specified in mplsTunnelResourceTable. This
          table also allows several tunnels to point to a
          single entry in this table, implying that these
          tunnels should share resources."
   ::= { mplsTeObjects 10 }

    Information by cisco_v1

    mplsTunnelCRLDPResTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MplsTunnelCRLDPResEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The mplsTunnelCRLDPResTable allows a manager to
          specify which CR-LDP-specific resources are desired
          for an MPLS tunnel if that tunnel is signaled using
          CR-LDP. Note that these attributes are in addition
          to those specified in mplsTunnelResourceTable. This
          table also allows several tunnels to point to a
          single entry in this table, implying that these
          tunnels should share resources."
    ::= { mplsTeObjects 10 }

    Information by oid_info

    Automatically extracted from RFC3812

    Information by mibdepot

    mplsTunnelCRLDPResTable OBJECT-TYPE
      SYNTAX        SEQUENCE OF MplsTunnelCRLDPResEntry
      MAX-ACCESS    not-accessible
      STATUS        current
      DESCRIPTION
           "The mplsTunnelCRLDPResTable allows a manager to
             specify which CR-LDP-specific resources are desired
             for an MPLS tunnel if that tunnel is signaled using
             CR-LDP. Note that these attributes are in addition
             to those specified in mplsTunnelResourceTable. This
             table also allows several tunnels to point to a
             single entry in this table, implying that these
             tunnels should share resources."
      ::= { mplsTeObjects 10 }

    Information by cisco

    mplsTunnelCRLDPResTable OBJECT-TYPE
      SYNTAX        SEQUENCE OF MplsTunnelCRLDPResEntry
      MAX-ACCESS    not-accessible
      STATUS        current
      DESCRIPTION
           "The mplsTunnelCRLDPResTable allows a manager to
             specify which CR-LDP-specific resources are desired
             for an MPLS tunnel if that tunnel is signaled using
             CR-LDP. Note that these attributes are in addition
             to those specified in mplsTunnelResourceTable. This
             table also allows several tunnels to point to a
             single entry in this table, implying that these
             tunnels should share resources."
      ::= { mplsTeObjects 10 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.166.3.2.10.1 mplsTunnelCRLDPResEntry 7 7 An entry in this table represents a set of resources
    for an MPLS tunnel established using CRLDP
    (mplsTunnelSignallingProto equal …

    Brothers (10)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.166.3.2.1 mplsTunnelIndexNext 1 1 This object contains an unused value for
    mplsTunnelIndex, or a zero to indicate
    that none exist. Negative values are not allowed,…
    1.3.6.1.2.1.10.166.3.2.2 mplsTunnelTable 1 38 The mplsTunnelTable allows new MPLS tunnels to be
    created between an LSR and a remote endpoint, and
    existing tunnels to be reconf…
    1.3.6.1.2.1.10.166.3.2.3 mplsTunnelHopListIndexNext 1 1 This object contains an appropriate value to be used
    for mplsTunnelHopListIndex when creating entries in
    the mplsTunnelHopTable. …
    1.3.6.1.2.1.10.166.3.2.4 mplsTunnelHopTable 1 16 The mplsTunnelHopTable is used to indicate the hops,
    strict or loose, for an instance of an MPLS tunnel
    defined in mplsTunnelTabl…
    1.3.6.1.2.1.10.166.3.2.5 mplsTunnelResourceIndexNext 1 1 This object contains the next appropriate value to
    be used for mplsTunnelResourceIndex when creating
    entries in the mplsTunnelRes…
    1.3.6.1.2.1.10.166.3.2.6 mplsTunnelResourceTable 1 11 The mplsTunnelResourceTable allows a manager to
    specify which resources are desired for an MPLS
    tunnel. This table also allows s…
    1.3.6.1.2.1.10.166.3.2.7 mplsTunnelARHopTable 1 7 The mplsTunnelARHopTable is used to indicate the
    hops for an MPLS tunnel defined in mplsTunnelTable,
    as reported by the MPLS sign…
    1.3.6.1.2.1.10.166.3.2.8 mplsTunnelCHopTable 1 10 The mplsTunnelCHopTable is used to indicate the
    hops, strict or loose, for an MPLS tunnel defined
    in mplsTunnelTable, as computed…
    1.3.6.1.2.1.10.166.3.2.9 mplsTunnelPerfTable 1 6 This table provides per-tunnel instance MPLS
    performance information.
    1.3.6.1.2.1.10.166.3.2.11 mplsTunnelNotificationEnable 1 1 If this object is true, then it enables the
    generation of mplsTunnelUp and mplsTunnelDown
    traps, otherwise these traps are not em…