Reference record for OID 1.3.6.1.2.1.10.166.8.2.2.2

parent

1.3.6.1.2.1.10.166.8.2.2 (mplsFTNCompliances)

node code

2

node name

mplsFTNModuleReadOnlyCompliance

dot oid

1.3.6.1.2.1.10.166.8.2.2.2

type

MODULE-COMPLIANCE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) mplsStdMIB(166) mplsFTNStdMIB(8) mplsFTNConformance(2) mplsFTNCompliances(2) mplsFTNModuleReadOnlyCompliance(2)}

{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) mplsStdMIB(166) mplsFTNStdMIB(8) mplsFTNConformance(2) mplsFTNCompliances(2) mplsFTNModuleReadOnlyCompliance(2)}

{iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) mplsStdMIB(166) mplsFTNStdMIB(8) mplsFTNConformance(2) mplsFTNCompliances(2) mplsFTNModuleReadOnlyCompliance(2)}

{iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) mplsStdMIB(166) mplsFTNStdMIB(8) mplsFTNConformance(2) mplsFTNCompliances(2) mplsFTNModuleReadOnlyCompliance(2)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) mplsStdMIB(166) mplsFTNStdMIB(8) mplsFTNConformance(2) mplsFTNCompliances(2) mplsFTNModuleReadOnlyCompliance(2)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) mplsStdMIB(166) mplsFTNStdMIB(8) mplsFTNConformance(2) mplsFTNCompliances(2) mplsFTNModuleReadOnlyCompliance(2)}

iri oid

/iso/identified-organization/dod/internet/mgmt/mib-2/transmission/mplsStdMIB/mplsFTNStdMIB/mplsFTNConformance/mplsFTNCompliances/mplsFTNModuleReadOnlyCompliance

/iso/identified-organization/dod/internet/mgmt/mib/transmission/mplsStdMIB/mplsFTNStdMIB/mplsFTNConformance/mplsFTNCompliances/mplsFTNModuleReadOnlyCompliance

/iso/org/dod/internet/mgmt/mib-2/transmission/mplsStdMIB/mplsFTNStdMIB/mplsFTNConformance/mplsFTNCompliances/mplsFTNModuleReadOnlyCompliance

/iso/org/dod/internet/mgmt/mib/transmission/mplsStdMIB/mplsFTNStdMIB/mplsFTNConformance/mplsFTNCompliances/mplsFTNModuleReadOnlyCompliance

/iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/mplsStdMIB/mplsFTNStdMIB/mplsFTNConformance/mplsFTNCompliances/mplsFTNModuleReadOnlyCompliance

/iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/mplsStdMIB/mplsFTNStdMIB/mplsFTNConformance/mplsFTNCompliances/mplsFTNModuleReadOnlyCompliance

iri by oid_info

/ISO/Identified-Organization/6/1/2/1/10/166/8/2/2/2

Description by oid_info

mplsFTNModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance requirement for implementations that only
provide read-only support for MPLS-FTN-STD-MIB. Such
devices can then be monitored but cannot be configured
using this MIB module."
MODULE IF-MIB -- The interfaces Group MIB, RFC 2863
MANDATORY-GROUPS {
ifGeneralInformationGroup,
ifCounterDiscontinuityGroup
}
MODULE -- This module
MANDATORY-GROUPS {
mplsFTNRuleGroup,
mplsFTNMapGroup,
mplsFTNPerfGroup
}
OBJECT mplsFTNIndexNext
MIN-ACCESS not-accessible
DESCRIPTION
"This object is not needed when mplsFTNTable is
implemented as read-only."
OBJECT mplsFTNRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only
status that needs to be supported."
OBJECT mplsFTNDescr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNMask
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNAddrType
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses."
OBJECT mplsFTNSourceAddrMin
SYNTAX InetAddress (SIZE (4 | 20))
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses."
OBJECT mplsFTNSourceAddrMax
SYNTAX InetAddress (SIZE (4 | 20))
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses."
OBJECT mplsFTNDestAddrMin
SYNTAX InetAddress (SIZE (4 | 20))
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses."
OBJECT mplsFTNDestAddrMax
SYNTAX InetAddress (SIZE (4 | 20))
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses."
OBJECT mplsFTNSourcePortMin
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNSourcePortMax
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNDestPortMin
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNDestPortMax
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNProtocol
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNActionType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNActionPointer
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNDscp
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFTNMapRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active(1) is the only
status that needs to be supported."
OBJECT mplsFTNMapStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
View at oid-info.com

Description by mibdepot

Compliance requirement for implementations that only
provide read-only support for MPLS-FTN-STD-MIB. Such
devices can then be monitored but cannot be configured
using this MIB module.

Parsed from file rfc3814-MPLS-Forwarding-Equivalence-Class-To-Next-Hop-Label-Forwarding-Entry-FEC-To-NHLFE.mib.txt
Company: None
Module: MPLS-FTN-STD-MIB

Description by circitor

Compliance requirement for implementations that only

provide read-only support for MPLS-FTN-STD-MIB. Such
devices can then be monitored but cannot be configured
using this MIB module.

Parsed from file MPLS-FTN-STD-MIB.mib
Module: MPLS-FTN-STD-MIB

Information by oid_info

Automatically extracted from RFC3814

Information by mibdepot

mplsFTNModuleReadOnlyCompliance MODULE-COMPLIANCE
      STATUS current
      DESCRIPTION
          "Compliance requirement for implementations that only
           provide read-only support for MPLS-FTN-STD-MIB. Such
           devices can then be monitored but cannot be configured
           using this MIB module."

      MODULE IF-MIB 
      MANDATORY-GROUPS {
         ifGeneralInformationGroup,
         ifCounterDiscontinuityGroup
      }

      MODULE 
      MANDATORY-GROUPS {
         mplsFTNRuleGroup,
         mplsFTNMapGroup,
         mplsFTNPerfGroup
      }

      OBJECT mplsFTNIndexNext
      MIN-ACCESS   not-accessible
      DESCRIPTION
          "This object is not needed when mplsFTNTable is
           implemented as read-only."

      OBJECT mplsFTNRowStatus
      SYNTAX       RowStatus { active(1) }
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required, and active is the only
           status that needs to be supported."

      OBJECT mplsFTNDescr
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT mplsFTNMask
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT mplsFTNAddrType
      SYNTAX       InetAddressType { ipv4(1), ipv6(2) }
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required. An implementation is only
           required to support IPv4 and IPv6 addresses."

      OBJECT mplsFTNSourceAddrMin
      SYNTAX       InetAddress (SIZE (4 | 20))
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required. An implementation is only
           required to support IPv4 and IPv6 addresses."

      OBJECT mplsFTNSourceAddrMax
      SYNTAX       InetAddress (SIZE (4 | 20))
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required. An implementation is only
           required to support IPv4 and IPv6 addresses."

      OBJECT mplsFTNDestAddrMin
      SYNTAX       InetAddress (SIZE (4 | 20))
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required. An implementation is only
           required to support IPv4 and IPv6 addresses."

      OBJECT mplsFTNDestAddrMax
      SYNTAX       InetAddress (SIZE (4 | 20))
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required. An implementation is only
           required to support IPv4 and IPv6 addresses."

      OBJECT mplsFTNSourcePortMin
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT mplsFTNSourcePortMax
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT mplsFTNDestPortMin
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT mplsFTNDestPortMax
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT mplsFTNProtocol
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT mplsFTNActionType
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT mplsFTNActionPointer
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT mplsFTNDscp
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT mplsFTNStorageType
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT mplsFTNMapRowStatus
      SYNTAX       RowStatus { active(1) }
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required, and active(1) is the only
           status that needs to be supported."

      OBJECT mplsFTNMapStorageType
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required."
      ::= { mplsFTNCompliances 2 }

Information by circitor

mplsFTNModuleReadOnlyCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
       "Compliance requirement for implementations that only

        provide read-only support for MPLS-FTN-STD-MIB. Such
        devices can then be monitored but cannot be configured
        using this MIB module."

   MODULE IF-MIB 
   MANDATORY-GROUPS {
      ifGeneralInformationGroup,
      ifCounterDiscontinuityGroup
   }

   MODULE 
   MANDATORY-GROUPS {
      mplsFTNRuleGroup,
      mplsFTNMapGroup,
      mplsFTNPerfGroup
   }

   OBJECT mplsFTNIndexNext
   MIN-ACCESS   not-accessible
   DESCRIPTION
       "This object is not needed when mplsFTNTable is
        implemented as read-only."

   OBJECT mplsFTNRowStatus
   SYNTAX       RowStatus { active(1) }
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required, and active is the only
        status that needs to be supported."

   OBJECT mplsFTNDescr
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required."

   OBJECT mplsFTNMask
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required."

   OBJECT mplsFTNAddrType
   SYNTAX       InetAddressType { ipv4(1), ipv6(2) }
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required. An implementation is only
        required to support IPv4 and IPv6 addresses."

   OBJECT mplsFTNSourceAddrMin

   SYNTAX       InetAddress (SIZE (4 | 20))
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required. An implementation is only
        required to support IPv4 and IPv6 addresses."

   OBJECT mplsFTNSourceAddrMax
   SYNTAX       InetAddress (SIZE (4 | 20))
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required. An implementation is only
        required to support IPv4 and IPv6 addresses."

   OBJECT mplsFTNDestAddrMin
   SYNTAX       InetAddress (SIZE (4 | 20))
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required. An implementation is only
        required to support IPv4 and IPv6 addresses."

   OBJECT mplsFTNDestAddrMax
   SYNTAX       InetAddress (SIZE (4 | 20))
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required. An implementation is only
        required to support IPv4 and IPv6 addresses."

   OBJECT mplsFTNSourcePortMin
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required."

   OBJECT mplsFTNSourcePortMax
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required."

   OBJECT mplsFTNDestPortMin
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required."

   OBJECT mplsFTNDestPortMax
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required."

   OBJECT mplsFTNProtocol

   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required."

   OBJECT mplsFTNActionType
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required."

   OBJECT mplsFTNActionPointer
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required."

   OBJECT mplsFTNDscp
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required."

   OBJECT mplsFTNStorageType
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required."

   OBJECT mplsFTNMapRowStatus
   SYNTAX       RowStatus { active(1) }
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required, and active(1) is the only
        status that needs to be supported."

   OBJECT mplsFTNMapStorageType
   MIN-ACCESS   read-only
   DESCRIPTION
       "Write access is not required."
   ::= { mplsFTNCompliances 2 }

First Registration Authority (recovered by parent 1.3.6)

Defense Communication Agency

Current Registration Authority (recovered by parent 1.3.6.1.2)

Internet Assigned Numbers Authority

Brothers (1)