ds1NMibE1PriNCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for using this MIB for ISDN
Primary Rate interfaces on E1 lines."
MODULE
MANDATORY-GROUPS { ds1NearEndCfgGroup,
ds1NearEndStatGroup }
OBJECT dsx1LineType
SYNTAX INTEGER {
dsx1E1CRC(5)
}
MIN-ACCESS read-only
DESCRIPTION
"Line type for E1 ISDN Primary Rate
interfaces."
OBJECT dsx1LineCoding
SYNTAX INTEGER {
dsx1HDB3(3)
}
MIN-ACCESS read-only
DESCRIPTION
"Type of Zero Code Suppression for
E1 ISDN Primary Rate interfaces."
OBJECT dsx1SignalMode
SYNTAX INTEGER {
messageOriented(4)
}
MIN-ACCESS read-only
DESCRIPTION
"Signaling on E1 ISDN Primary Rate interfaces
is always message oriented."
OBJECT dsx1TransmitClockSource
SYNTAX INTEGER {
loopTiming(1)
}
MIN-ACCESS read-only
DESCRIPTION
"The transmit clock is derived from received
clock on ISDN Primary Rate interfaces."
OBJECT dsx1Fdl
MIN-ACCESS read-only
DESCRIPTION
"Facilities Data Link usage on E1 ISDN
Primary Rate interfaces.
Note: There is an \M-Channel\ in E1,
using National Bit Sa4 (G704,
Table 5A). It is used to implement
management features between ET
and NT. This is different from
FDL in T1, which is used to carry
control signals and performance
data. In E1, control and status
signals are carried using National
Bits Sa5, Sa6, and A (RAI Ind.).
This indicates that only the other(1) or
eventually the dsx1Fdl-none(8) bits should
be set in this object for E1 PRI."
OBJECT dsx1Channelization
MIN-ACCESS read-only
DESCRIPTION
"The ability to set the channelization is not
required."
OBJECT dsx1LineMode
MIN-ACCESS read-only
DESCRIPTION
"The ability to set the line mode is not
required."
OBJECT dsx1LineBuildOut
MIN-ACCESS read-only
DESCRIPTION
"The ability to set the line build-out
is not required."
OBJECT dsx1LineImpedance
MIN-ACCESS read-only
DESCRIPTION
"The ability to set line impedance is not
required."
View at oid-info.com
Automatically extracted from RFC4805
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.18.14.2.1 | ds1Compliance | 0 | 0 | The compliance statement for T1 and E1 interfaces. |
1.3.6.1.2.1.10.18.14.2.2 | ds1MibT1PriCompliance | 0 | 0 | Compliance statement for using this MIB for ISDN Primary Rate interfaces on T1 lines. |
1.3.6.1.2.1.10.18.14.2.3 | ds1MibE1PriCompliance | 0 | 0 | Compliance statement for using this MIB for ISDN Primary Rate interfaces on E1 lines. |
1.3.6.1.2.1.10.18.14.2.4 | ds1Ds2Compliance | 0 | 0 | Compliance statement for using this MIB for DS2 interfaces. |
1.3.6.1.2.1.10.18.14.2.5 | ds1NCompliance | 0 | 0 | The compliance statement for T1 and E1 interfaces. |
1.3.6.1.2.1.10.18.14.2.6 | ds1MibT1PriNCompliance | 0 | 0 | Compliance statement for using this MIB for ISDN Primary Rate interfaces on T1 lines. |
1.3.6.1.2.1.10.18.14.2.7 | ds1MibE1PriNCompliance | 0 | 0 | Compliance statement for using this MIB for ISDN Primary Rate interfaces on E1 lines. |
1.3.6.1.2.1.10.18.14.2.8 | ds1J1Compliance | 0 | 0 | ds1J1Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for T1, J1, and E1 interfaces." MODULE -… |
1.3.6.1.2.1.10.18.14.2.9 | ds1NMibT1PriNCompliance | 0 | 0 | ds1NMibT1PriNCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for using this MIB for ISDN Primary … |