teLinkDescriptorEntry OBJECT-TYPE
SYNTAX TeLinkDescriptorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created for every TE link interface
switching capability descriptor. An ifEntry in the iftable
must exist before a teLinkDescriptorEntry using the same
ifIndex is created. iftype of ifEntry must be teLink(200).
If a TE link entry in the iftable is destroyed, then so are
all of the entries in the teLinkDescriptorTable that use the
ifIndex of this TE link."
INDEX { ifIndex, teLinkDescriptorId }
View at oid-info.com
An entry in this table is created for every TE link interface
switching capability descriptor. An ifEntry in the ifTable
must exist before a teLinkDescriptorEntry using the same
ifIndex is created. ifType of ifEntry must be teLink(200).
If a TE link entry in the ifTable is destroyed, then so are
all of the entries in the teLinkDescriptorTable that use the
ifIndex of this TE link.
Parsed from file rfc4220-MPLS-TE-Link.mib.txt
Company: None
Module: TE-LINK-STD-MIB
An entry in this table is created for every TE link interface
switching capability descriptor. An ifEntry in the ifTable
must exist before a teLinkDescriptorEntry using the same
ifIndex is created. ifType of ifEntry must be teLink(200).
If a TE link entry in the ifTable is destroyed, then so are
all of the entries in the teLinkDescriptorTable that use the
ifIndex of this TE link.
Parsed from file TE-LINK-STD-MIB.mib
Module: TE-LINK-STD-MIB
Automatically extracted from RFC4220
teLinkDescriptorEntry OBJECT-TYPE SYNTAX TeLinkDescriptorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created for every TE link interface switching capability descriptor. An ifEntry in the ifTable must exist before a teLinkDescriptorEntry using the same ifIndex is created. ifType of ifEntry must be teLink(200). If a TE link entry in the ifTable is destroyed, then so are all of the entries in the teLinkDescriptorTable that use the ifIndex of this TE link." INDEX { ifIndex, teLinkDescriptorId } ::= { teLinkDescriptorTable 1 }
teLinkDescriptorEntry OBJECT-TYPE SYNTAX TeLinkDescriptorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created for every TE link interface switching capability descriptor. An ifEntry in the ifTable must exist before a teLinkDescriptorEntry using the same ifIndex is created. ifType of ifEntry must be teLink(200). If a TE link entry in the ifTable is destroyed, then so are all of the entries in the teLinkDescriptorTable that use the ifIndex of this TE link." INDEX { ifIndex, teLinkDescriptorId } ::= { teLinkDescriptorTable 1 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.200.1.2.1.1 | teLinkDescriptorId | 0 | 0 | This object specifies the link descriptor identifier. |
| 1.3.6.1.2.1.10.200.1.2.1.2 | teLinkDescrSwitchingCapability | 0 | 0 | This attribute specifies interface switching capability of the TE link, which is derived from its component links. |
| 1.3.6.1.2.1.10.200.1.2.1.3 | teLinkDescrEncodingType | 0 | 0 | This attribute specifies the TE link encoding type. |
| 1.3.6.1.2.1.10.200.1.2.1.4 | teLinkDescrMinLspBandwidth | 0 | 0 | This attribute specifies the minimum LSP bandwidth on the TE link. This is derived from the union of the minimum LSP bandwidth o… |
| 1.3.6.1.2.1.10.200.1.2.1.5 | teLinkDescrMaxLspBandwidthPrio0 | 0 | 0 | This attribute specifies the maximum LSP bandwidth at priority 0 on the TE link. This is the union of the maximum LSP bandwidth … |
| 1.3.6.1.2.1.10.200.1.2.1.6 | teLinkDescrMaxLspBandwidthPrio1 | 0 | 0 | This attribute specifies the maximum LSP bandwidth at priority 1 on the TE link. This is the union of the maximum LSP bandwidth … |
| 1.3.6.1.2.1.10.200.1.2.1.7 | teLinkDescrMaxLspBandwidthPrio2 | 0 | 0 | This attribute specifies the maximum LSP bandwidth at priority 2 on the TE link. This is the union of the maximum LSP bandwidth … |
| 1.3.6.1.2.1.10.200.1.2.1.8 | teLinkDescrMaxLspBandwidthPrio3 | 0 | 0 | This attribute specifies the maximum LSP bandwidth at priority 3 on the TE link. This is the union of the maximum LSP bandwidth … |
| 1.3.6.1.2.1.10.200.1.2.1.9 | teLinkDescrMaxLspBandwidthPrio4 | 0 | 0 | This attribute specifies the maximum LSP bandwidth at priority 4 on the TE link. This is the union of the maximum LSP bandwidth … |
| 1.3.6.1.2.1.10.200.1.2.1.10 | teLinkDescrMaxLspBandwidthPrio5 | 0 | 0 | This attribute specifies the maximum LSP bandwidth at priority 5 on the TE link. This is the union of the maximum LSP bandwidth … |
| 1.3.6.1.2.1.10.200.1.2.1.11 | teLinkDescrMaxLspBandwidthPrio6 | 0 | 0 | This attribute specifies the maximum LSP bandwidth at priority 6 on the TE link. This is the union of the maximum LSP bandwidth … |
| 1.3.6.1.2.1.10.200.1.2.1.12 | teLinkDescrMaxLspBandwidthPrio7 | 0 | 0 | This attribute specifies the maximum LSP bandwidth at priority 7 on the TE link. This is the union of the maximum LSP bandwidth … |
| 1.3.6.1.2.1.10.200.1.2.1.13 | teLinkDescrInterfaceMtu | 0 | 0 | This attribute specifies the interface MTU for the TE link descriptor. |
| 1.3.6.1.2.1.10.200.1.2.1.14 | teLinkDescrIndication | 0 | 0 | This attribute specifies whether this interface supports Standard or Arbitrary SONET/SDH. |
| 1.3.6.1.2.1.10.200.1.2.1.15 | teLinkDescrRowStatus | 0 | 0 | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be changed if teLinkDescrR… |
| 1.3.6.1.2.1.10.200.1.2.1.16 | teLinkDescrStorageType | 0 | 0 | The storage type for this conceptual row in the teLinkDescriptorTable. Conceptual rows having the value 'permanent' need not all… |