dvbRcsSystemLocation OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Physical location of the ODU antenna expressed as
longitude, latitude, and altitude. The string
shall have 31 characters in the following format:
<xxxx.xxx>,<a>,<yyyyy.yyy>,<b>,<zzzz.z>,M
where x, y and z represents digits,
a=N or S,
b=E or W,
Reading the digits from left to right:
\x\ 7 latitude digits;
x digits 1-2 contain the degrees,
x digits 3-7 contain the minutes in decimal;
\y\ 8 longitude digits;
y digits 1-3 contain the degrees,
y digits 4-8 contain the minutes in decimal;
\z\ 5 altitude digits;
meters above sea level in decimal;
\.\ is the decimal point;
\,\ is the field separator;
\M\ is the indicator for altitude meters.
This format is a modified subset of the NMEA 0183
(National Marine Electronics Association, Interface
Standard) format for Global Positioning System Fix
Data.
This location and the satellite position are used to
calculate the RCST-satellite path delay.
Note: The system.sysLocation object of MIB-II provides
physical location of the IDU unit."
View at oid-info.com
Automatically extracted from RFC5728
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.239.1.1.1.1 | dvbRcsSystemMibRevision | 0 | 0 | dvbRcsSystemMibRevision OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows … |
| 1.3.6.1.2.1.10.239.1.1.1.2 | dvbRcsSystemSatLabsProfilesDeclaration | 0 | 0 | dvbRcsSystemSatLabsProfilesDeclaration OBJECT-TYPE SYNTAX DvbRcsSatLabsProfileMap MAX-ACCESS read-only STATUS current DESCRIPTI… |
| 1.3.6.1.2.1.10.239.1.1.1.3 | dvbRcsSystemSatLabsOptionsDeclaration | 0 | 0 | dvbRcsSystemSatLabsOptionsDeclaration OBJECT-TYPE SYNTAX DvbRcsSatLabsOptionMap MAX-ACCESS read-only STATUS current DESCRIPTION… |
| 1.3.6.1.2.1.10.239.1.1.1.4 | dvbRcsSystemSatLabsFeaturesDeclaration | 0 | 0 | dvbRcsSystemSatLabsFeaturesDeclaration OBJECT-TYPE SYNTAX DvbRcsSatLabsFeatureMap MAX-ACCESS read-only STATUS current DESCRIPTI… |
| 1.3.6.1.2.1.10.239.1.1.1.6 | dvbRcsSystemOduAntennaSize | 0 | 0 | dvbRcsSystemOduAntennaSize OBJECT-TYPE SYNTAX Unsigned32 UNITS "cm" MAX-ACCESS read-write STATUS current DESCRIPTION "Diameter … |
| 1.3.6.1.2.1.10.239.1.1.1.7 | dvbRcsSystemOduAntennaGain | 0 | 0 | dvbRcsSystemOduAntennaGain OBJECT-TYPE SYNTAX Unsigned32 UNITS "x0.1 dBi" MAX-ACCESS read-write STATUS current DESCRIPTION "Ant… |
| 1.3.6.1.2.1.10.239.1.1.1.8 | dvbRcsSystemOduSspa | 0 | 0 | dvbRcsSystemOduSspa OBJECT-TYPE SYNTAX Unsigned32 UNITS "x0.1 W" MAX-ACCESS read-write STATUS current DESCRIPTION "Power level … |
| 1.3.6.1.2.1.10.239.1.1.1.9 | dvbRcsSystemOduTxType | 0 | 0 | dvbRcsSystemOduTxType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Type of transmitter … |
| 1.3.6.1.2.1.10.239.1.1.1.10 | dvbRcsSystemOduRxType | 0 | 0 | dvbRcsSystemOduRxType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Type of LNB installe… |
| 1.3.6.1.2.1.10.239.1.1.1.11 | dvbRcsSystemOduRxBand | 0 | 0 | dvbRcsSystemOduRxBand OBJECT-TYPE SYNTAX INTEGER { oduHighRxBand (0), oduLowRxBand (1) } MAX-ACCESS read-write STATUS current D… |
| 1.3.6.1.2.1.10.239.1.1.1.12 | dvbRcsSystemOduRxLO | 0 | 0 | dvbRcsSystemOduRxLO OBJECT-TYPE SYNTAX Unsigned32 UNITS "x100 Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Frequency o… |
| 1.3.6.1.2.1.10.239.1.1.1.13 | dvbRcsSystemOduTxLO | 0 | 0 | dvbRcsSystemOduTxLO OBJECT-TYPE SYNTAX Unsigned32 UNITS "x100 Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Frequency o… |
| 1.3.6.1.2.1.10.239.1.1.1.14 | dvbRcsSystemIduPep | 2 | 2 | None |
| 1.3.6.1.2.1.10.239.1.1.1.15 | dvbRcsOduTx | 2 | 5 | None |
| 1.3.6.1.2.1.10.239.1.1.1.16 | dvbRcsOduRx | 2 | 5 | None |
| 1.3.6.1.2.1.10.239.1.1.1.17 | dvbRcsOduAntenna | 2 | 5 | None |