pwEntry OBJECT-TYPE
SYNTAX PwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a pseudowire (PW) virtual
connection across a packet network. It is indexed by
pwIndex, which uniquely identifies a singular
connection.
A row can be created by an operator command from a
management plan of a PE, by signaling, or due to auto-
discovery process. An operator\s command can be issued via
a non-SNMP application; in such case, a row will be created
implicitly by the agent.
The read-create objects in this table are divided into
three categories:
1) Objects that MUST NOT be changed after row activation.
These are objects that define basic properties of the
PW (for example type, destination, etc.).
2) Objects that MAY be changed when the PW is
defined as not active. A change of these objects involves
re-signaling of the PW or it might be traffic affecting.
PW not active is defined as one of the following
conditions:
a) The pwRowStatus is notInService(2).
b) The pwRowStatus is notReady(3).
c) The pwAdminStatus is down(2).
If the operator needs to change one of the values for an
active row, the operator can either set the pwRowStatus to
notInService(2) or set pwAdminStatus to down(2).
Signaling (or traffic) is initiated again upon setting
the pwRowStatus to active(1) or setting the pwAdminStatus
to up(1) or testing(3), respectively.
3) Objects that MAY be changed at any time.
A PW MAY have an entry in the iftable in addition to the
entry in this table. In this case, a special iftype for PW
will be set in the iftable, and the ifIndex in the iftable
of the PW will be set in the pwIfIndex object in this table.
By default, all the read-create objects MUST NOT be
changed after row activation, unless specifically indicated
in the individual object description.
Manual entries in this table SHOULD be preserved after a
reboot; the agent MUST ensure the integrity of those
entries. If the set of entries of a specific row are found
to be inconsistent after reboot, the PW pwOperStatus MUST
be declared as notPresent(5).
"
INDEX { pwIndex }
View at oid-info.com
Automatically extracted from RFC5601
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.246.1.2.1.1 | pwIndex | 0 | 0 | pwIndex OBJECT-TYPE SYNTAX PwIndexType MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique index for the conceptual … |
| 1.3.6.1.2.1.10.246.1.2.1.2 | pwType | 0 | 0 | pwType OBJECT-TYPE SYNTAX IANAPwTypeTC MAX-ACCESS read-create STATUS current DESCRIPTION "This value indicates the emulated ser… |
| 1.3.6.1.2.1.10.246.1.2.1.3 | pwOwner | 0 | 0 | pwOwner OBJECT-TYPE SYNTAX INTEGER { manual (1), pwIdFecSignaling (2), -- PW signaling with PW ID FEC genFecSignaling (3), -- G… |
| 1.3.6.1.2.1.10.246.1.2.1.4 | pwPsnType | 0 | 0 | pwPsnType OBJECT-TYPE SYNTAX IANAPwPsnTypeTC MAX-ACCESS read-create STATUS current DESCRIPTION "This object is set by the opera… |
| 1.3.6.1.2.1.10.246.1.2.1.5 | pwSetUpPriority | 0 | 0 | pwSetUpPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the … |
| 1.3.6.1.2.1.10.246.1.2.1.6 | pwHoldingPriority | 0 | 0 | pwHoldingPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines th… |
| 1.3.6.1.2.1.10.246.1.2.1.8 | pwPeerAddrType | 0 | 0 | pwPeerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Denotes the address type o… |
| 1.3.6.1.2.1.10.246.1.2.1.9 | pwPeerAddr | 0 | 0 | pwPeerAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the value of … |
| 1.3.6.1.2.1.10.246.1.2.1.10 | pwAttachedPwIndex | 0 | 0 | pwAttachedPwIndex OBJECT-TYPE SYNTAX PwIndexOrZeroType MAX-ACCESS read-create STATUS current DESCRIPTION "If the PW is attached… |
| 1.3.6.1.2.1.10.246.1.2.1.11 | pwIfIndex | 0 | 0 | pwIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the … |
| 1.3.6.1.2.1.10.246.1.2.1.12 | pwID | 0 | 0 | pwID OBJECT-TYPE SYNTAX PwIDType MAX-ACCESS read-create STATUS current DESCRIPTION "Pseudowire identifier. If the pwOwner objec… |
| 1.3.6.1.2.1.10.246.1.2.1.13 | pwLocalGroupID | 0 | 0 | pwLocalGroupID OBJECT-TYPE SYNTAX PwGroupID MAX-ACCESS read-create STATUS current DESCRIPTION "Used in the Group ID field sent … |
| 1.3.6.1.2.1.10.246.1.2.1.14 | pwGroupAttachmentID | 0 | 0 | pwGroupAttachmentID OBJECT-TYPE SYNTAX PwAttachmentIdentifierType MAX-ACCESS read-create STATUS current DESCRIPTION "This objec… |
| 1.3.6.1.2.1.10.246.1.2.1.15 | pwLocalAttachmentID | 0 | 0 | pwLocalAttachmentID OBJECT-TYPE SYNTAX PwAttachmentIdentifierType MAX-ACCESS read-create STATUS current DESCRIPTION "This objec… |
| 1.3.6.1.2.1.10.246.1.2.1.16 | pwRemoteAttachmentID | 0 | 0 | pwRemoteAttachmentID OBJECT-TYPE SYNTAX PwAttachmentIdentifierType MAX-ACCESS read-create STATUS current DESCRIPTION "This obje… |
| 1.3.6.1.2.1.10.246.1.2.1.17 | pwCwPreference | 0 | 0 | pwCwPreference OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Defines if the control word wil… |
| 1.3.6.1.2.1.10.246.1.2.1.18 | pwLocalIfMtu | 0 | 0 | pwLocalIfMtu OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "If not equal to zero, … |
| 1.3.6.1.2.1.10.246.1.2.1.19 | pwLocalIfString | 0 | 0 | pwLocalIfString OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A PW MAY be associated to an i… |
| 1.3.6.1.2.1.10.246.1.2.1.20 | pwLocalCapabAdvert | 0 | 0 | pwLocalCapabAdvert OBJECT-TYPE SYNTAX IANAPwCapabilities MAX-ACCESS read-create STATUS current DESCRIPTION "If a maintenance pr… |
| 1.3.6.1.2.1.10.246.1.2.1.21 | pwRemoteGroupID | 0 | 0 | pwRemoteGroupID OBJECT-TYPE SYNTAX PwGroupID MAX-ACCESS read-only STATUS current DESCRIPTION "This object is obtained from the … |
| 1.3.6.1.2.1.10.246.1.2.1.22 | pwCwStatus | 0 | 0 | pwCwStatus OBJECT-TYPE SYNTAX PwCwStatusTC MAX-ACCESS read-only STATUS current DESCRIPTION "If signaling is used for PW establi… |
| 1.3.6.1.2.1.10.246.1.2.1.23 | pwRemoteIfMtu | 0 | 0 | pwRemoteIfMtu OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The remote interface MTU as (optio… |
| 1.3.6.1.2.1.10.246.1.2.1.24 | pwRemoteIfString | 0 | 0 | pwRemoteIfString OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates t… |
| 1.3.6.1.2.1.10.246.1.2.1.25 | pwRemoteCapabilities | 0 | 0 | pwRemoteCapabilities OBJECT-TYPE SYNTAX IANAPwCapabilities MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the capab… |
| 1.3.6.1.2.1.10.246.1.2.1.26 | pwFragmentCfgSize | 0 | 0 | pwFragmentCfgSize OBJECT-TYPE SYNTAX PwFragSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "If set to a va… |
| 1.3.6.1.2.1.10.246.1.2.1.27 | pwRmtFragCapability | 0 | 0 | pwRmtFragCapability OBJECT-TYPE SYNTAX PwFragStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the fragment… |
| 1.3.6.1.2.1.10.246.1.2.1.28 | pwFcsRetentionCfg | 0 | 0 | pwFcsRetentionCfg OBJECT-TYPE SYNTAX INTEGER { fcsRetentionDisable (1), fcsRetentionEnable (2) } MAX-ACCESS read-create STATUS … |
| 1.3.6.1.2.1.10.246.1.2.1.29 | pwFcsRetentionStatus | 0 | 0 | pwFcsRetentionStatus OBJECT-TYPE SYNTAX BITS { remoteIndicationUnknown (0), remoteRequestFcsRetention (1), fcsRetentionEnabled … |
| 1.3.6.1.2.1.10.246.1.2.1.30 | pwOutboundLabel | 0 | 0 | pwOutboundLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The PW label used in the outbo… |
| 1.3.6.1.2.1.10.246.1.2.1.31 | pwInboundLabel | 0 | 0 | pwInboundLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The PW label used in the inboun… |
| 1.3.6.1.2.1.10.246.1.2.1.32 | pwName | 0 | 0 | pwName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The canonical name assigned to the… |
| 1.3.6.1.2.1.10.246.1.2.1.33 | pwDescr | 0 | 0 | pwDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "A textual string containing infor… |
| 1.3.6.1.2.1.10.246.1.2.1.34 | pwCreateTime | 0 | 0 | pwCreateTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time t… |
| 1.3.6.1.2.1.10.246.1.2.1.35 | pwUpTime | 0 | 0 | pwUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the time since last change of … |
| 1.3.6.1.2.1.10.246.1.2.1.36 | pwLastChange | 0 | 0 | pwLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time t… |
| 1.3.6.1.2.1.10.246.1.2.1.37 | pwAdminStatus | 0 | 0 | pwAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2), testing(3) -- in a test mode } MAX-ACCESS r… |
| 1.3.6.1.2.1.10.246.1.2.1.38 | pwOperStatus | 0 | 0 | pwOperStatus OBJECT-TYPE SYNTAX PwOperStatusTC MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the opera… |
| 1.3.6.1.2.1.10.246.1.2.1.39 | pwLocalStatus | 0 | 0 | pwLocalStatus OBJECT-TYPE SYNTAX PwStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of the PW in th… |
| 1.3.6.1.2.1.10.246.1.2.1.40 | pwRemoteStatusCapable | 0 | 0 | pwRemoteStatusCapable OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), notYetKnown (2), remoteCapable (3), remoteNotCapable (4) … |
| 1.3.6.1.2.1.10.246.1.2.1.41 | pwRemoteStatus | 0 | 0 | pwRemoteStatus OBJECT-TYPE SYNTAX PwStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of the PW as w… |
| 1.3.6.1.2.1.10.246.1.2.1.42 | pwTimeElapsed | 0 | 0 | pwTimeElapsed OBJECT-TYPE SYNTAX HCPerftimeElapsed MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds, incl… |
| 1.3.6.1.2.1.10.246.1.2.1.43 | pwValidIntervals | 0 | 0 | pwValidIntervals OBJECT-TYPE SYNTAX HCPerfValidIntervals MAX-ACCESS read-only STATUS current DESCRIPTION "The number of previou… |
| 1.3.6.1.2.1.10.246.1.2.1.44 | pwRowStatus | 0 | 0 | pwRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "For creating, modifying, and deleti… |
| 1.3.6.1.2.1.10.246.1.2.1.45 | pwStorageType | 0 | 0 | pwStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the sto… |
| 1.3.6.1.2.1.10.246.1.2.1.46 | pwOamEnable | 0 | 0 | pwOamEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates if OAM is … |
| 1.3.6.1.2.1.10.246.1.2.1.47 | pwGenAGIType | 0 | 0 | pwGenAGIType OBJECT-TYPE SYNTAX PwGenIdType MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the AGI … |
| 1.3.6.1.2.1.10.246.1.2.1.48 | pwGenLocalAIIType | 0 | 0 | pwGenLocalAIIType OBJECT-TYPE SYNTAX PwGenIdType MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the type of … |
| 1.3.6.1.2.1.10.246.1.2.1.49 | pwGenRemoteAIIType | 0 | 0 | pwGenRemoteAIIType OBJECT-TYPE SYNTAX PwGenIdType MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the type of… |