Reference record for OID 1.3.6.1.2.1.10.251.1.2.3.1.4



parent
1.3.6.1.2.1.10.251.1.2.3.1 (xdsl2SCStatusEntry)
node code
4
node name
xdsl2SCStatusLogMt
dot oid
1.3.6.1.2.1.10.251.1.2.3.1.4
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Status(2) xdsl2SCStatusTable(3) xdsl2SCStatusEntry(1) xdsl2SCStatusLogMt(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Status(2) xdsl2SCStatusTable(3) xdsl2SCStatusEntry(1) xdsl2SCStatusLogMt(4)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Status(2) xdsl2SCStatusTable(3) xdsl2SCStatusEntry(1) xdsl2SCStatusLogMt(4)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Status(2) xdsl2SCStatusTable(3) xdsl2SCStatusEntry(1) xdsl2SCStatusLogMt(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Status(2) xdsl2SCStatusTable(3) xdsl2SCStatusEntry(1) xdsl2SCStatusLogMt(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Status(2) xdsl2SCStatusTable(3) xdsl2SCStatusEntry(1) xdsl2SCStatusLogMt(4)}
  • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/vdsl2MIB/xdsl2Objects/xdsl2Status/xdsl2SCStatusTable/xdsl2SCStatusEntry/xdsl2SCStatusLogMt
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/vdsl2MIB/xdsl2Objects/xdsl2Status/xdsl2SCStatusTable/xdsl2SCStatusEntry/xdsl2SCStatusLogMt
  • /iso/org/dod/internet/mgmt/mib-2/transmission/vdsl2MIB/xdsl2Objects/xdsl2Status/xdsl2SCStatusTable/xdsl2SCStatusEntry/xdsl2SCStatusLogMt
  • /iso/org/dod/internet/mgmt/mib/transmission/vdsl2MIB/xdsl2Objects/xdsl2Status/xdsl2SCStatusTable/xdsl2SCStatusEntry/xdsl2SCStatusLogMt
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/vdsl2MIB/xdsl2Objects/xdsl2Status/xdsl2SCStatusTable/xdsl2SCStatusEntry/xdsl2SCStatusLogMt
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/vdsl2MIB/xdsl2Objects/xdsl2Status/xdsl2SCStatusTable/xdsl2SCStatusEntry/xdsl2SCStatusLogMt
  • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/10/251/1/2/3/1/4

    Description by circitor

    This parameter contains the number of symbols used to
    measure the Hlog(f) values. It is represented as an unsigned
    integer in the range from 1 to 2^16-1.
    After a loop diagnostic procedure, this parameter shall contain
    the number of symbols used to measure the Hlog(f). It should
    correspond to the value specified in the Recommendation (e.g., the
    number of symbols in 1 s time interval for ITU-T Recommendation.
    G.992.3).

    Parsed from file VDSL2-LINE-MIB.mib
    Module: VDSL2-LINE-MIB

    Description by cisco_v1

    This parameter contains the number of symbols used to
    measure the Hlog(f) values. It is represented as an unsigned
    integer in the range from 1 to 2^16-1.
    After a loop diagnostic procedure, this parameter shall contain
    the number of symbols used to measure the Hlog(f). It should
    correspond to the value specified in the Recommendation (e.g., the
    number of symbols in 1 s time interval for ITU-T Recommendation.
    G.992.3).

    Description by oid_info

    xdsl2SCStatusLogMt OBJECT-TYPE
    SYNTAX Unsigned32 (1..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "This parameter contains the number of symbols used to
    measure the Hlog(f) values. It is represented as an unsigned
    integer in the range from 1 to 2^16-1.
    After a loop diagnostic procedure, this parameter shall contain
    the number of symbols used to measure the Hlog(f). It should
    correspond to the value specified in the Recommendation (e.g., the
    number of symbols in 1 s time interval for ITU-T Recommendation.
    G.992.3)."
    REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.4 (HLOGMTds)
    and paragraph #7.5.1.26.10 (HLOGMTus)"

    View at oid-info.com

    Description by mibdepot

    This parameter contains the number of symbols used to
    measure the Hlog(f) values. It is represented as an unsigned
    integer in the range from 1 to 2^16-1.
    After a loop diagnostic procedure, this parameter shall contain
    the number of symbols used to measure the Hlog(f). It should
    correspond to the value specified in the Recommendation (e.g., the
    number of symbols in 1 s time interval for ITU-T Recommendation.
    G.992.3).

    Parsed from file VDSL2-LINE-MIB.my.txt
    Company: None
    Module: VDSL2-LINE-MIB

    Description by cisco

    This parameter contains the number of symbols used to
    measure the Hlog(f) values. It is represented as an unsigned
    integer in the range from 1 to 2^16-1.
    After a loop diagnostic procedure, this parameter shall contain
    the number of symbols used to measure the Hlog(f). It should
    correspond to the value specified in the Recommendation (e.g., the
    number of symbols in 1 s time interval for ITU-T Recommendation.
    G.992.3).

    Information by circitor

    xdsl2SCStatusLogMt OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter contains the number of symbols used to measure the Hlog(f) values. It is represented as an unsigned integer in the range from 1 to 2^16-1. After a loop diagnostic procedure, this parameter shall contain the number of symbols used to measure the Hlog(f). It should correspond to the value specified in the Recommendation (e.g., the number of symbols in 1 s time interval for ITU-T Recommendation. G.992.3)." REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.4 (HLOGMTds) and paragraph #7.5.1.26.10 (HLOGMTus)" ::= { xdsl2SCStatusEntry 4 }

    Information by cisco_v1

    xdsl2SCStatusLogMt OBJECT-TYPE SYNTAX Gauge(1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This parameter contains the number of symbols used to measure the Hlog(f) values. It is represented as an unsigned integer in the range from 1 to 2^16-1. After a loop diagnostic procedure, this parameter shall contain the number of symbols used to measure the Hlog(f). It should correspond to the value specified in the Recommendation (e.g., the number of symbols in 1 s time interval for ITU-T Recommendation. G.992.3)." REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.4 (HLOGMTds) and paragraph #7.5.1.26.10 (HLOGMTus)" ::= { xdsl2SCStatusEntry 4 }

    Information by oid_info

    Automatically extracted from RFC5650

    Information by mibdepot

    xdsl2SCStatusLogMt OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter contains the number of symbols used to measure the Hlog(f) values. It is represented as an unsigned integer in the range from 1 to 2^16-1. After a loop diagnostic procedure, this parameter shall contain the number of symbols used to measure the Hlog(f). It should correspond to the value specified in the Recommendation (e.g., the number of symbols in 1 s time interval for ITU-T Recommendation. G.992.3)." REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.4 (HLOGMTds) and paragraph #7.5.1.26.10 (HLOGMTus)" ::= { xdsl2SCStatusEntry 4 }

    Information by cisco

    xdsl2SCStatusLogMt OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter contains the number of symbols used to measure the Hlog(f) values. It is represented as an unsigned integer in the range from 1 to 2^16-1. After a loop diagnostic procedure, this parameter shall contain the number of symbols used to measure the Hlog(f). It should correspond to the value specified in the Recommendation (e.g., the number of symbols in 1 s time interval for ITU-T Recommendation. G.992.3)." REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.4 (HLOGMTds) and paragraph #7.5.1.26.10 (HLOGMTus)" ::= { xdsl2SCStatusEntry 4 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (10)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.251.1.2.3.1.1 xdsl2SCStatusDirection 0 0 The direction of the subcarrier either
    upstream or downstream.
    1.3.6.1.2.1.10.251.1.2.3.1.2 xdsl2SCStatusLinScale 0 0 The scale factor to be applied to the H(f) linear
    representation values for the respective transmission direction.
    This parameter…
    1.3.6.1.2.1.10.251.1.2.3.1.3 xdsl2SCStatusLinScGroupSize 0 0 Number of subcarriers per group used to report the H(f)
    linear representation values for the respective transmission
    direction. …
    1.3.6.1.2.1.10.251.1.2.3.1.5 xdsl2SCStatusLogScGroupSize 0 0 Number of subcarriers per group used to report the H(f)
    logarithmic representation values for the respective
    transmission directi…
    1.3.6.1.2.1.10.251.1.2.3.1.6 xdsl2SCStatusQlnMt 0 0 This parameter contains the number of symbols used to
    measure the QLN(f) values. It is an unsigned integer in the range
    from 1 t…
    1.3.6.1.2.1.10.251.1.2.3.1.7 xdsl2SCStatusQlnScGroupSize 0 0 Number of subcarriers per group used to report the Quiet
    Line Noise values for the respective transmission direction.
    The valid v…
    1.3.6.1.2.1.10.251.1.2.3.1.8 xdsl2SCStatusSnrMtime 0 0 This parameter contains the number of symbols used to measure
    the SNR(f) values. It is an unsigned integer in the range from 1
    t…
    1.3.6.1.2.1.10.251.1.2.3.1.9 xdsl2SCStatusSnrScGroupSize 0 0 Number of subcarriers per group used to report the SNR values
    on the respective transmission direction.
    The valid values are 1, 2…
    1.3.6.1.2.1.10.251.1.2.3.1.10 xdsl2SCStatusAttainableRate 0 0 Maximum Attainable Data Rate. The maximum net data rate
    currently attainable by the xTU-C transmitter and xTU-R receiver
    (when r…
    1.3.6.1.2.1.10.251.1.2.3.1.11 xdsl2SCStatusRowStatus 0 0 Row Status. The SNMP agent will create a row in this table
    for storing the results of a DELT performed on the associated
    line, i…