Status and parameter values for a synchronous
port.
Parsed from file MRVINREACH.mib
Module: MRVINREACH
Status and parameter values for a synchronous
port.
rs232SyncPortEntry OBJECT-TYPE
SYNTAX Rs232SyncPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Status and parameter values for a synchronous
port."
INDEX { rs232SyncPortIndex }
View at oid-info.com
Status and parameter values for a synchronous
port.
Parsed from file rfc1659.mib.txt
Company: None
Module: RS-232-MIB
Status and parameter values for a synchronous
port.
rs232SyncPortEntry OBJECT-TYPE SYNTAX Rs232SyncPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status and parameter values for a synchronous port." INDEX { rs232SyncPortIndex } ::= { rs232SyncPortTable 1 }
rs232SyncPortEntry OBJECT-TYPE SYNTAX Rs232SyncPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status and parameter values for a synchronous port." INDEX { rs232SyncPortIndex } ::= { rs232SyncPortTable 1 }
Automatically extracted from Cisco "SNMP v2 MIBs".
rs232SyncPortEntry OBJECT-TYPE SYNTAX Rs232SyncPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status and parameter values for a synchronous port." INDEX { rs232SyncPortIndex } ::= { rs232SyncPortTable 1 }
rs232SyncPortEntry OBJECT-TYPE SYNTAX Rs232SyncPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Status and parameter values for a synchronous port." INDEX { rs232SyncPortIndex } ::= { rs232SyncPortTable 1 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.33.4.1.1 | rs232SyncPortIndex | 0 | 0 | A unique value for each port. Its value is the same as rs232PortIndex for the port. |
1.3.6.1.2.1.10.33.4.1.2 | rs232SyncPortClockSource | 0 | 0 | Source of the port's bit rate clock. 'split' means the tranmit clock is internal and the receive clock is external. |
1.3.6.1.2.1.10.33.4.1.3 | rs232SyncPortFrameCheckErrs | 0 | 0 | Total number of frames with an invalid frame check sequence, input from the port since system re-initialization and while the por… |
1.3.6.1.2.1.10.33.4.1.4 | rs232SyncPortTransmitUnderrunErrs, rs232SyncPortTxUnderrunErrs | 0 | 0 | Total number of frames that failed to be transmitted on the port since system re-initialization and while the port state was 'up'… |
1.3.6.1.2.1.10.33.4.1.5 | rs232SyncPortReceiveOverrunErrs, rs232SyncPortRxOverrunErrs | 0 | 0 | Total number of frames that failed to be received on the port since system re-initialization and while the port state was 'up' or… |
1.3.6.1.2.1.10.33.4.1.6 | rs232SyncPortInterruptedFrames, rs232SyncPortInterFrames | 0 | 0 | Total number of frames that failed to be received or transmitted on the port due to loss of modem signals since system re-initial… |
1.3.6.1.2.1.10.33.4.1.7 | rs232SyncPortAbortedFrames | 0 | 0 | Number of frames aborted on the port due to receiving an abort sequence since system re-initialization and while the port state w… |
1.3.6.1.2.1.10.33.4.1.8 | rs232SyncPortRole | 0 | 0 | The role the device is playing that is using this port. dte means the device is performing the role of data terminal equipment… |
1.3.6.1.2.1.10.33.4.1.9 | rs232SyncPortEncoding | 0 | 0 | The bit stream encoding technique that is in effect for this port. nrz for Non-Return to Zero encoding nrzi for Non-Return to… |
1.3.6.1.2.1.10.33.4.1.10 | rs232SyncPortRTSControl | 0 | 0 | The method used to control the Request To Send (RTS) signal. controlled when the DTE is asserts RTS each time data needs to be tr… |
1.3.6.1.2.1.10.33.4.1.11 | rs232SyncPortRTSCTSDelay | 0 | 0 | The interval (in milliseconds) that the DCE must wait after it sees RTS asserted before asserting CTS. This object exists in sup… |
1.3.6.1.2.1.10.33.4.1.12 | rs232SyncPortMode | 0 | 0 | The mode of operation of the port with respect to the direction and simultaneity of data transfer. fdx when frames o… |
1.3.6.1.2.1.10.33.4.1.13 | rs232SyncPortIdlePattern | 0 | 0 | The bit pattern used to indicate an idle line. |
1.3.6.1.2.1.10.33.4.1.14 | rs232SyncPortMinFlags | 0 | 0 | The minimum number of flag patterns this port needs in order to recognize the end of one frame and the start of the next. Plausi… |