The MIB module to describe SONET/SDH interface objects.
Copyright (C) The Internet Society (2003). This version
of this MIB module is part of RFC 3592; see the RFC
itself for full legal notices.
Parsed from file SONET-MIB.mib
Module: SONET-MIB
sonetMIB MODULE-IDENTITY
LAST-UPDATED "9401030000Z"
ORGANIZATION "IETF AToM MIB Working Group"
CONTACT-INFO
" Tracy Brown
Postal: Bell Communications Research
331 Newman Springs Road
P.O. Box 7020
Red Bank, NJ 07701-7020
US
Tel: +1 908 758 2107
Fax: +1 908 758 4177
E-mail: [email protected]
Kaj Tesink
Postal: Bell Communications Research
331 Newman Springs Road
P.O. Box 7020
Red Bank, NJ 07701-7020
US
Tel: +1 908 758 5254
Fax: +1 908 758 4196
E-mail: [email protected]"
DESCRIPTION
"The MIB module to describe
SONET/SDH interfaces objects."
View at oid-info.com
The MIB module to describe
SONET/SDH interfaces objects.
Parsed from file SONET-MIB.txt
Company: None
Module: SONET-MIB
The MIB module to describe SONET/SDH interface objects.
Copyright (C) The Internet Society (2003). This version
of this MIB module is part of RFC 3592; see the RFC
itself for full legal notices.
sonetMIB MODULE-IDENTITY LAST-UPDATED "200308110000Z" ORGANIZATION "IETF AToM MIB Working Group" CONTACT-INFO "WG charter: http://www.ietf.org/html.charters/atommib-charter.html Mailing Lists: General Discussion: [email protected] To Subscribe: [email protected] Kaj Tesink Telcordia Technologies Tel: (732) 758-5254 Fax: (732) 758-2269 E-mail: [email protected]." DESCRIPTION "The MIB module to describe SONET/SDH interface objects. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3592; see the RFC itself for full legal notices." REVISION "200308110000Z" DESCRIPTION "The key changes made to this MIB module since its publication in RFC 2558 are as follows. (1) Corrected typographical error (bellcore1991(2) in sonetSESthresholdSet) (2) Added support for sts192cSTM64(6) and sts768cSTM256(7) in sonetPathCurrentWidth (3) Corrected description of the applicability of VTs for SDH for improved accuracy (4) Added clarification in the SES description that CV counts should be frozen during SESs (5) Corrected typographical errors: - Line Alarm Indication Signal description of the Terminology section (20.5 - In the Terminology section sonetSESThresholdSet " REVISION "199810190000Z" DESCRIPTION "The RFC 2558 version of this MIB module. The key changes made to this MIB module since its initial publication in RFC 1595 are as follows. (1) The MODULE-IDENTITY has been updated to reflect the changes to the MIB. (2) Where applicable, the textual conventions PerfCurrentCount and PerfIntervalCount from PerfHist-TC-MIB have been used in place of Gauge32. (3) An agent now has the option to delay updates to the various performance counts in lieu of performing retroactive adjustments upon entering into or exiting from unavailable time. This implementation option is described in Appendix A of this memo. (4) In order to make the SONET-MIB more useful for circuit provisioning, the formerly read-only objects sonetMediumType, sonetMediumLineCoding, sonetMediumLineType, and sonetMediumCircuitIdentifier have been given a MAX-ACCESS of read-write. The MIN-ACCESS remains read-only. (5) The DESCRIPTION clause for sonetMediumTimeElapsed has been updated to describe its behaviour if the duration of the current interval exceeds the maximum value. (6) The DESCRIPTION clause for sonetMediumValidIntervals has been updated to describe its behaviour when some intervals may be unavailable, and the object sonetMediumInvalidIntervals has been added to keep count of the number of missing intervals (if any). (7) The object sonetMediumLoopbackConfig has been added to enable or disable loopback configurations. (8) Because the error count thresholds for declaring severely errored seconds that are specified in ANSI T1.231-1993, ITU-T G.826-1995, and ANSI T1.231-1997 are all different from each other and from the thresholds specified in RFC 1595, an enumerated INTEGER object sonetSESthresholdSet has been added to allow an agent to specify which threshold set is in use. Text has been added to Section 3 stating that if this object is not implemented the thresholds specified in RFC 1595 should be assumed, and the table containing those thresholds has been moved to Appendix B of this memo. (9) A column with SYNTAX TruthValue has been added to each interval table. The purpose of the additional column is to indicate, for each interval, whether the data is valid in the sense intended by ANSI T1.231 clause 9.1.2.2 [T1.231a][T1.231b]. The objects in question are: sonetSectionIntervalValidData sonetLineIntervalValidData sonetFarEndLineIntervalValidData sonetPathIntervalValidData sonetFarEndPathIntervalValidData sonetVTIntervalValidData sonetFarEndVTIntervalValidData (10) The ranges for sonetPathCurrentStatus and sonetVTCurrentStatus have been made consistent with the DESCRIPTION clauses. (11) The conformance information has been updated. Previous conformance information from RFC 1595 has been deprecated. Some typographical errors in the deprecated section have been corrected in order to prevent MIB compilation errors." REVISION "199401030000Z" DESCRIPTION "The RFC 1595 version of this MIB module." ::= { transmission 39 }
sonetMIB OBJECT IDENTIFIER ::= { transmission 39 }
Automatically extracted from Cisco "SNMP v2 MIBs".
sonetMIB MODULE-IDENTITY LAST-UPDATED "9810190000Z" ORGANIZATION "IETF AToM MIB Working Group" CONTACT-INFO "Kaj Tesink Telcordia Technologies Tel: (732) 758-5254 Fax: (732) 758-2269 E-mail: [email protected]." DESCRIPTION "The MIB module to describe SONET/SDH interfaces objects." REVISION "9810190000Z" DESCRIPTION "The key changes made to this MIB module since its initial publication in RFC 1595 are as follows. (1) The MODULE-IDENTITY has been updated to reflect the changes to the MIB. (2) Where applicable, the textual conventions PerfCurrentCount and PerfIntervalCount from PerfHist-TC-MIB have been used in place of Gauge32. (3) An agent now has the option to delay updates to the various performance counts in lieu of performing retroactive adjustments upon entering into or exiting from unavailable time. This implementation option is described in Appendix A of this memo. (4) In order to make the SONET-MIB more useful for circuit provisioning, the formerly read-only objects sonetMediumType, sonetMediumLineCoding, sonetMediumLineType, and sonetMediumCircuitIdentifier have been given a MAX-ACCESS of read-write. The MIN-ACCESS remains read-only. (5) The DESCRIPTION clause for sonetMediumTimeElapsed has been updated to describe its behaviour if the duration of the current interval exceeds the maximum value. (6) The DESCRIPTION clause for sonetMediumValidIntervals has been updated to describe its behaviour when some intervals may be unavailable, and the object sonetMediumInvalidIntervals has been added to keep count of the number of missing intervals (if any). (7) The object sonetMediumLoopbackConfig has been added to enable or disable loopback configurations. (8) Because the error count thresholds for declaring severely errored seconds that are specified in ANSI T1.231-1993, ITU-T G.826-1995, and ANSI T1.231-1997 are all different from each other and from the thresholds specified in RFC 1595, an enumerated INTEGER object sonetSESthresholdSet has been added to allow an agent to specify which threshold set is in use. Text has been added to Section 3 stating that if this object is not implemented the thresholds specified in RFC 1595 should be assumed, and the table containing those thresholds has been moved to Appendix B of this memo. (9) A column with SYNTAX TruthValue has been added to each interval table. The purpose of the additional column is to indicate, for each interval, whether the data is valid in the sense intended by ANSI T1.231 clause 9.1.2.2 [31][35]. The objects in question are: sonetSectionIntervalValidData sonetLineIntervalValidData sonetFarEndLineIntervalValidData sonetPathIntervalValidData sonetFarEndPathIntervalValidData sonetVTIntervalValidData sonetFarEndVTIntervalValidData (10) The ranges for sonetPathCurrentStatus and sonetVTCurrentStatus have been made consistent with the DESCRIPTION clauses. (11) The conformance information has been updated. Previous conformance information from RFC 1595 has been deprecated. Some typographical errors in the deprecated section have been corrected in order to prevent MIB compilation errors." REVISION "9401030000Z" DESCRIPTION "The RFC1595 version of this MIB module." ::= { transmission 39 }
sonetMIB MODULE-IDENTITY LAST-UPDATED "200308110000Z" ORGANIZATION "IETF AToM MIB Working Group" CONTACT-INFO "WG charter: http://www.ietf.org/html.charters/atommib-charter.html Mailing Lists: General Discussion: [email protected] To Subscribe: [email protected] Kaj Tesink Telcordia Technologies Tel: (732) 758-5254 Fax: (732) 758-2269 E-mail: [email protected]." DESCRIPTION "The MIB module to describe SONET/SDH interface objects. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3592; see the RFC itself for full legal notices." REVISION "200308110000Z" DESCRIPTION "The key changes made to this MIB module since its publication in RFC 2558 are as follows. (1) Corrected typographical error (bellcore1991(2) in sonetSESthresholdSet) (2) Added support for sts192cSTM64(6) and sts768cSTM256(7) in sonetPathCurrentWidth (3) Corrected description of the applicability of VTs for SDH for improved accuracy (4) Added clarification in the SES description that CV counts should be frozen during SESs (5) Corrected typographical errors: - Line Alarm Indication Signal description of the Terminology section (20.5 - In the Terminology section sonetSESThresholdSet " REVISION "199810190000Z" DESCRIPTION "The RFC 2558 version of this MIB module. The key changes made to this MIB module since its initial publication in RFC 1595 are as follows. (1) The MODULE-IDENTITY has been updated to reflect the changes to the MIB. (2) Where applicable, the textual conventions PerfCurrentCount and PerfIntervalCount from PerfHist-TC-MIB have been used in place of Gauge32. (3) An agent now has the option to delay updates to the various performance counts in lieu of performing retroactive adjustments upon entering into or exiting from unavailable time. This implementation option is described in Appendix A of this memo. (4) In order to make the SONET-MIB more useful for circuit provisioning, the formerly read-only objects sonetMediumType, sonetMediumLineCoding, sonetMediumLineType, and sonetMediumCircuitIdentifier have been given a MAX-ACCESS of read-write. The MIN-ACCESS remains read-only. (5) The DESCRIPTION clause for sonetMediumTimeElapsed has been updated to describe its behaviour if the duration of the current interval exceeds the maximum value. (6) The DESCRIPTION clause for sonetMediumValidIntervals has been updated to describe its behaviour when some intervals may be unavailable, and the object sonetMediumInvalidIntervals has been added to keep count of the number of missing intervals (if any). (7) The object sonetMediumLoopbackConfig has been added to enable or disable loopback configurations. (8) Because the error count thresholds for declaring severely errored seconds that are specified in ANSI T1.231-1993, ITU-T G.826-1995, and ANSI T1.231-1997 are all different from each other and from the thresholds specified in RFC 1595, an enumerated INTEGER object sonetSESthresholdSet has been added to allow an agent to specify which threshold set is in use. Text has been added to Section 3 stating that if this object is not implemented the thresholds specified in RFC 1595 should be assumed, and the table containing those thresholds has been moved to Appendix B of this memo. (9) A column with SYNTAX TruthValue has been added to each interval table. The purpose of the additional column is to indicate, for each interval, whether the data is valid in the sense intended by ANSI T1.231 clause 9.1.2.2 [T1.231a][T1.231b]. The objects in question are: sonetSectionIntervalValidData sonetLineIntervalValidData sonetFarEndLineIntervalValidData sonetPathIntervalValidData sonetFarEndPathIntervalValidData sonetVTIntervalValidData sonetFarEndVTIntervalValidData (10) The ranges for sonetPathCurrentStatus and sonetVTCurrentStatus have been made consistent with the DESCRIPTION clauses. (11) The conformance information has been updated. Previous conformance information from RFC 1595 has been deprecated. Some typographical errors in the deprecated section have been corrected in order to prevent MIB compilation errors." REVISION "199401030000Z" DESCRIPTION "The RFC 1595 version of this MIB module." ::= { transmission 39 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.39.1 | sonetObjects | 5 | 61 | None |
1.3.6.1.2.1.10.39.2 | sonetObjectsPath | 2 | 32 | None |
1.3.6.1.2.1.10.39.3 | sonetObjectsVT | 2 | 32 | None |
1.3.6.1.2.1.10.39.4 | sonetConformance | 2 | 20 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.1 | optix155622H | 0 | 0 | None |
1.3.6.1.2.1.10.2 | optix10Gv2 | 0 | 0 | None |
1.3.6.1.2.1.10.5 | x25 | 10 | 169 | None |
1.3.6.1.2.1.10.7 | ieee8023, dot3 | 10 | 204 | CSMACD-like Objects (IEEE 802.3) |
1.3.6.1.2.1.10.8 | ieee8024 | 0 | 0 | IEEE 802.4 Token Bus-like Objects |
1.3.6.1.2.1.10.9 | dot5 | 6 | 60 | The MIB module for IEEE Token Ring entities. |
1.3.6.1.2.1.10.10 | dot5 | 4 | 115 | None |
1.3.6.1.2.1.10.15 | fddi | 7 | 236 | None |
1.3.6.1.2.1.10.16 | lapb | 5 | 58 | None |
1.3.6.1.2.1.10.18 | ds1 | 11 | 147 | The MIB module to describe DS1, E1, DS2, and E2 interfaces objects. |
1.3.6.1.2.1.10.19 | e1 | 0 | 0 | E1 Carrier Objects |
1.3.6.1.2.1.10.20 | isdnMib | 3 | 89 | The MIB module to describe the management of ISDN interfaces. |
1.3.6.1.2.1.10.21 | dialControlMib | 3 | 93 | The MIB module to describe peer information for demand access and possibly other kinds of interfaces. |
1.3.6.1.2.1.10.23 | ppp | 4 | 101 | None |
1.3.6.1.2.1.10.30 | ds3 | 12 | 119 | The is the MIB module that describes DS3 and E3 interfaces objects. |
1.3.6.1.2.1.10.31 | sip | 6 | 54 | None |
1.3.6.1.2.1.10.32 | frame-relay, frameRelayDTE, frameRelay, frpublic | 8 | 126 | The MIB module to describe the use of a Frame Relay interface by a DTE. |
1.3.6.1.2.1.10.33 | rs232 | 7 | 58 | The MIB module for RS-232-like hardware devices. |
1.3.6.1.2.1.10.34 | paralell, para | 5 | 25 | The MIB module for Parallel-printer-like hardware devices. |
1.3.6.1.2.1.10.35 | arcnet | 0 | 0 | ARC network |
1.3.6.1.2.1.10.36 | arcnet-plus | 0 | 0 | ARC network plus |
1.3.6.1.2.1.10.37 | atm | 0 | 0 | ATM |
1.3.6.1.2.1.10.38 | miox25, miox | 2 | 36 | MIOX25 |
1.3.6.1.2.1.10.44 | frnetservMIB | 3 | 126 | The MIB module to describe generic objects for Frame Relay Network Service. |
1.3.6.1.2.1.10.45 | dot12MIB | 2 | 34 | This MIB module describes objects for managing IEEE 802.12 interfaces. |
1.3.6.1.2.1.10.46 | ipoaMIB | 3 | 96 | This module defines a portion of the management information base (MIB) for managing Classical IP and ARP over ATM entities. |
1.3.6.1.2.1.10.47 | mfrMib, hippi | 5 | 94 | This is the MIB used to control and monitor the multilink frame relay (MFR) function described in FRF.16. |
1.3.6.1.2.1.10.48 | hdsl2ShdslMIB | 3 | 150 | This MIB module defines a collection of objects for managing HDSL2/SHDSL lines. An agent may reside at either end of the line; h… |
1.3.6.1.2.1.10.49 | apsMIB | 3 | 80 | This management information module supports the configuration and management of SONET linear APS groups. The definitions and desc… |
1.3.6.1.2.1.10.56 | fcMgmtMIB | 3 | 163 | This module defines management information specific to Fibre Channel-attached devices. Copyright (C) The Internet Society (2005).… |
1.3.6.1.2.1.10.81 | ds0 | 3 | 18 | The MIB module to describe DS0 interfaces objects. |
1.3.6.1.2.1.10.82 | ds0bundle | 4 | 19 | The MIB module to describe DS0 Bundle interfaces objects. |
1.3.6.1.2.1.10.94 | adslmib | 3 | 418 | The MIB module defining objects for the management of a pair of ADSL modems at each end of the ADSL line. Each such line has an … |
1.3.6.1.2.1.10.95 | l2tp | 9 | 186 | The MIB module that describes managed objects of general use by the Layer Two Transport Protocol. |
1.3.6.1.2.1.10.96 | hdslHturMIB | 1 | 23 | None |
1.3.6.1.2.1.10.97 | vdslMIB | 1 | 186 | The MIB module defining objects for the management of a pair of VDSL transceivers at each end of the VDSL line. Each such line h… |
1.3.6.1.2.1.10.127 | docsIfMib | 7 | 773 | This is the MIB Module for MCNS/DOCSIS compliant Radio Frequency (RF) interfaces in Cable Modems (CM) and Cable Modem Termination… |
1.3.6.1.2.1.10.128 | docsTrCmMIB | 0 | 0 | TELCO Return MIB for Data Over Cable Access modems and termination systems |
1.3.6.1.2.1.10.131 | tunnelMIB | 2 | 41 | The MIB module for management of IP Tunnels, independent of the specific encapsulation scheme in use. |
1.3.6.1.2.1.10.132 | coffee | 5 | 21 | The MIB Module for coffee vending devices. |
1.3.6.1.2.1.10.133 | optIfMibModule | 2 | 474 | The MIB module to describe pre-OTN and OTN interfaces. Copyright (C) The Internet Society (2003). This version of this MIB modul… |
1.3.6.1.2.1.10.134 | etherWisMIB | 3 | 32 | The objects in this MIB module are used in conjunction with objects in the SONET-MIB and the MAU-MIB to manage the Ethernet WAN I… |
1.3.6.1.2.1.10.146 | dvbInaIf | 2 | 300 | The MIB modules for INAs that conform to the EuroModem specification. This MIB assumes the INA implements MIB-II RFC 1213 The ori… |
1.3.6.1.2.1.10.166 | mplsStdMIB | 16 | 849 | None |
1.3.6.1.2.1.10.200 | teLinkStdMIB | 3 | 87 | Copyright (C) 2005 The Internet Society. This version of this MIB module is part of RFC 4220; see the RFC itself for full legal … |
1.3.6.1.2.1.10.227 | lmpMIB | 3 | 226 | Copyright (C) 2006 The Internet Society. This version of the MIB module is part of RFC 4631; see the RFC itself for full legal n… |
1.3.6.1.2.1.10.228 | vdslExtSCMMIB | 1 | 26 | The VDSL-LINE-MIB found in RFC 3728 defines objects for the management of a pair of VDSL transceivers at each end of the VDSL lin… |
1.3.6.1.2.1.10.229 | vdslExtMCMMIB | 1 | 41 | The VDSL-LINE-MIB found in RFC 3728 defines objects for the management of a pair of VDSL transceivers at each end of the VDSL lin… |
1.3.6.1.2.1.10.230 | ifcpMgmtMIB | 2 | 69 | This module defines management information specific to internet Fibre Channel Protocol (iFCP) gateway management. Copyright (C) Th… |
1.3.6.1.2.1.10.238 | adsl2MIB | 2 | 354 | This document defines a Management Information Base (MIB) module for use with network management protocols in the Internet commun… |
1.3.6.1.2.1.10.239 | dvbRcsMib | 2 | 216 | dvbRcsMib MODULE-IDENTITY LAST-UPDATED "201002161200Z" ORGANIZATION "The SatLabs Group" CONTACT-INFO "The SatLabs Group Web: ht… |
1.3.6.1.2.1.10.246 | pwStdMIB | 3 | 137 | pwStdMIB MODULE-IDENTITY LAST-UPDATED "200906110000Z" -- 11 June 2009 00:00:00 GMT ORGANIZATION "Pseudowire Edge-to-Edge Emulat… |
1.3.6.1.2.1.10.251 | vdsl2MIB | 4 | 435 | This document defines a Management Information Base (MIB) module for use with network management protocols in the Internet commun… |
1.3.6.1.2.1.10.274 | vplsGenericMIB | 3 | 50 | vplsGenericMIB MODULE-IDENTITY LAST-UPDATED "201405191200Z" -- 19 May 2014 12:00:00 GMT ORGANIZATION "Layer 2 Virtual Private N… |
1.3.6.1.2.1.10.275 | vplsLdpMIB | 3 | 13 | vplsLdpMIB MODULE-IDENTITY LAST-UPDATED "201405191200Z" -- 19 May 2014 12:00:00 GMT ORGANIZATION "Layer 2 Virtual Private Netwo… |
1.3.6.1.2.1.10.276 | vplsBgpMIB | 2 | 21 | vplsBgpMIB MODULE-IDENTITY LAST-UPDATED "201405191200Z" -- 19 May 2014 12:00:00 GMT ORGANIZATION "Layer 2 Virtual Private Netwo… |
1.3.6.1.2.1.10.7777 | pwMIB | 1 | 1 | None |
1.3.6.1.2.1.10.9999 | mplsMIB | 1 | 1 | None |