A list of Token Ring timer values for an
802.5 interface.
Parsed from file TOKENRING-MIB.mib
Module: TOKENRING-MIB
A list of Token Ring timer values for an
802.5 interface.
dot5TimerEntry OBJECT-TYPE
SYNTAX Dot5TimerEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A list of Token Ring timer values for an
802.5 interface."
INDEX { dot5TimerIfIndex }
View at oid-info.com
A list of Token Ring timer values for an
802.5 interface.
Parsed from file rfc1231.mib.txt
Company: None
Module: RFC1231-MIB
A list of Token Ring timer values for an
802.5 interface.
dot5TimerEntry OBJECT-TYPE SYNTAX Dot5TimerEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A list of Token Ring timer values for an 802.5 interface." INDEX { dot5TimerIfIndex } ::= { dot5TimerTable 1 }
dot5TimerEntry OBJECT-TYPE SYNTAX Dot5TimerEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "A list of Token Ring timer values for an 802.5 interface." INDEX { dot5TimerIfIndex } ::= { dot5TimerTable 1 }
Automatically extracted from Cisco "SNMP v2 MIBs".
dot5TimerEntry OBJECT-TYPE SYNTAX Dot5TimerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Token Ring timer values for an 802.5 interface." INDEX { dot5TimerIfIndex } ::= { dot5TimerTable 1 }
dot5TimerEntry OBJECT-TYPE SYNTAX Dot5TimerEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A list of Token Ring timer values for an 802.5 interface." INDEX { dot5TimerIfIndex } ::= { dot5TimerTable 1 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.9.5.1.1 | dot5TimerIfIndex | 0 | 0 | The value of this object identifies the 802.5 interface for which this entry contains timer values. The value of this object for … |
| 1.3.6.1.2.1.10.9.5.1.2 | dot5TimerReturnRepeat | 0 | 0 | The time-out value used to ensure the interface will return to Repeat State, in units of 100 micro-seconds. The value should be g… |
| 1.3.6.1.2.1.10.9.5.1.3 | dot5TimerHolding | 0 | 0 | Maximum period of time a station is permitted to transmit frames after capturing a token, in units of 100 micro-seconds. |
| 1.3.6.1.2.1.10.9.5.1.4 | dot5TimerQueuePDU | 0 | 0 | The time-out value for enqueuing of an SMP PDU after reception of an AMP or SMP frame in which the A and C bits were equal to 0, i… |
| 1.3.6.1.2.1.10.9.5.1.5 | dot5TimerValidTransmit | 0 | 0 | The time-out value used by the active monitor to detect the absence of valid transmissions, in units of 100 micro-seconds. |
| 1.3.6.1.2.1.10.9.5.1.6 | dot5TimerNoToken | 0 | 0 | The time-out value used to recover from various-related error situations. If N is the maximum number of stations on the ring, the … |
| 1.3.6.1.2.1.10.9.5.1.7 | dot5TimerActiveMon | 0 | 0 | The time-out value used by the active monitor to stimulate the enqueuing of an AMP PDU for transmission, in units of 100 micro-sec… |
| 1.3.6.1.2.1.10.9.5.1.8 | dot5TimerStandbyMon | 0 | 0 | The time-out value used by the stand-by monitors to ensure that there is an active monitor on the ring and to detect a continuous … |
| 1.3.6.1.2.1.10.9.5.1.9 | dot5TimerErrorReport | 0 | 0 | The time-out value which determines how often a station shall send a Report Error MAC frame to report its error counters, in units… |
| 1.3.6.1.2.1.10.9.5.1.10 | dot5TimerBeaconTransmit | 0 | 0 | The time-out value which determines how long a station shall remain in the state of transmitting Beacon frames before entering the… |
| 1.3.6.1.2.1.10.9.5.1.11 | dot5TimerBeaconReceive | 0 | 0 | The time-out value which determines how long a station shall receive Beacon frames from its downstream neighbor before entering th… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.9.5.2 | dot5Compliances | 0 | 0 | None |