Reference record for OID 1.3.6.1.2.1.10.94.1.1.3.1.6



parent
1.3.6.1.2.1.10.94.1.1.3.1 (adslAturPhysEntry)
node code
6
node name
adslAturCurrStatus
dot oid
1.3.6.1.2.1.10.94.1.1.3.1.6
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) adslmib(94) adslLineMib(1) adslMibObjects(1) adslAturPhysTable(3) adslAturPhysEntry(1) adslAturCurrStatus(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) adslmib(94) adslLineMib(1) adslMibObjects(1) adslAturPhysTable(3) adslAturPhysEntry(1) adslAturCurrStatus(6)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) adslmib(94) adslLineMib(1) adslMibObjects(1) adslAturPhysTable(3) adslAturPhysEntry(1) adslAturCurrStatus(6)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) adslmib(94) adslLineMib(1) adslMibObjects(1) adslAturPhysTable(3) adslAturPhysEntry(1) adslAturCurrStatus(6)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) adslmib(94) adslLineMib(1) adslMibObjects(1) adslAturPhysTable(3) adslAturPhysEntry(1) adslAturCurrStatus(6)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) adslmib(94) adslLineMib(1) adslMibObjects(1) adslAturPhysTable(3) adslAturPhysEntry(1) adslAturCurrStatus(6)}
  • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/adslmib/adslLineMib/adslMibObjects/adslAturPhysTable/adslAturPhysEntry/adslAturCurrStatus
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/adslmib/adslLineMib/adslMibObjects/adslAturPhysTable/adslAturPhysEntry/adslAturCurrStatus
  • /iso/org/dod/internet/mgmt/mib-2/transmission/adslmib/adslLineMib/adslMibObjects/adslAturPhysTable/adslAturPhysEntry/adslAturCurrStatus
  • /iso/org/dod/internet/mgmt/mib/transmission/adslmib/adslLineMib/adslMibObjects/adslAturPhysTable/adslAturPhysEntry/adslAturCurrStatus
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/adslmib/adslLineMib/adslMibObjects/adslAturPhysTable/adslAturPhysEntry/adslAturCurrStatus
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/adslmib/adslLineMib/adslMibObjects/adslAturPhysTable/adslAturPhysEntry/adslAturCurrStatus
  • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/10/94/1/1/3/1/6

    Description by circitor

    Indicates current state of the ATUR line. This is a
    bit-map of possible conditions. Due to the isolation
    of the ATUR when line problems occur, many state
    conditions like loss of power, loss of quality signal,
    and initialization errors, can not be determined.
    While trouble shooting ATUR, also use object,
    adslAtucCurrStatus. The various bit positions are:

    0 noDefect There no defects on the line

    1 lossOfFraming ATUR failure due to not
    receiving valid frame

    2 lossOfSignal ATUR failure due to not
    receiving signal

    3 lossOfPower ATUR failure due to loss of
    power

    4 lossOfSignalQuality Loss of Signal Quality is
    declared when the Noise Margin
    falls below the Minimum Noise
    Margin, or the
    bit-error-rate exceeds 10^-7.

    This is intended to supplement ifOperStatus.

    Parsed from file ADSL-LINE-MIB.mib
    Module: ADSL-LINE-MIB

    Description by cisco_v1

    Indicates current state of the ATUR line. This is a
    bit-map of possible conditions. Due to the isolation
    of the ATUR when line problems occur, many state
    conditions like loss of power, loss of quality signal,
    and initialization errors, can not be determined.
    While trouble shooting ATUR, also use object,
    adslAtucCurrStatus. The various bit positions are:

    0 noDefect There no defects on the line

    1 lossOfFraming ATUR failure due to not
    receiving valid frame

    2 lossOfSignal ATUR failure due to not
    receiving signal

    3 lossOfPower ATUR failure due to loss of
    power

    4 lossOfSignalQuality Loss of Signal Quality is
    declared when the Noise Margin
    falls below the Minimum Noise
    Margin, or the
    bit-error-rate exceeds 10^-7.

    This is intended to supplement ifOperStatus.

    Description by oid_info

    SYNTAX BITS {
    noDefect(0),
    lossOfFraming(1),
    lossOfSignal(2),
    lossOfPower(3),
    lossOfSignalQuality(4)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Indicates current state of the ATUR line. This is a
    bit-map of possible conditions. Due to the isolation
    of the ATUR when line problems occur, many state
    conditions like loss of power, loss of quality signal,
    and initialization errors, can not be determined.
    While trouble shooting ATUR, also use object,
    adslAtucCurrStatus. The various bit positions are:
    0 noDefect There no defects on the line
    1 lossOfFraming ATUR failure due to not
    receiving valid frame
    2 lossOfSignal ATUR failure due to not
    receiving signal
    3 lossOfPower ATUR failure due to loss of
    power
    4 lossOfSignalQuality Loss of Signal Quality is
    declared when the Noise Margin
    falls below the Minimum Noise
    Margin, or the
    bit-error-rate exceeds 10^-7.
    This is intended to supplement ifOperStatus."
    View at oid-info.com

    Description by mibdepot

    Indicates current state of the ATUR line. This is a
    bit-map of possible conditions. Due to the isolation
    of the ATUR when line problems occur, many state
    conditions like loss of power, loss of quality signal,
    and initialization errors, can not be determined.
    While trouble shooting ATUR, also use object,
    adslAtucCurrStatus. The various bit positions are:

    0 noDefect There no defects on the line

    1 lossOfFraming ATUR failure due to not
    receiving valid frame

    2 lossOfSignal ATUR failure due to not
    receiving signal

    3 lossOfPower ATUR failure due to loss of
    power

    4 lossOfSignalQuality Loss of Signal Quality is
    declared when the Noise Margin
    falls below the Minimum Noise
    Margin, or the
    bit-error-rate exceeds 10^-7.

    This is intended to supplement ifOperStatus.

    Parsed from file adsl-line.mib.txt
    Company: None
    Module: ADSL-LINE-MIB

    Description by cisco

    Indicates current state of the ATUR line. This is a
    bit-map of possible conditions. Due to the isolation
    of the ATUR when line problems occur, many state
    conditions like loss of power, loss of quality signal,
    and initialization errors, can not be determined.
    While trouble shooting ATUR, also use object,
    adslAtucCurrStatus. The various bit positions are:

    0 noDefect There no defects on the line

    1 lossOfFraming ATUR failure due to not
    receiving valid frame

    2 lossOfSignal ATUR failure due to not
    receiving signal

    3 lossOfPower ATUR failure due to loss of
    power

    4 lossOfSignalQuality Loss of Signal Quality is
    declared when the Noise Margin
    falls below the Minimum Noise
    Margin, or the
    bit-error-rate exceeds 10^-7.

    This is intended to supplement ifOperStatus.

    Information by circitor

    adslAturCurrStatus OBJECT-TYPE SYNTAX BITS { noDefect(0), lossOfFraming(1), lossOfSignal(2), lossOfPower(3), lossOfSignalQuality(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current state of the ATUR line. This is a bit-map of possible conditions. Due to the isolation of the ATUR when line problems occur, many state conditions like loss of power, loss of quality signal, and initialization errors, can not be determined. While trouble shooting ATUR, also use object, adslAtucCurrStatus. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming ATUR failure due to not receiving valid frame 2 lossOfSignal ATUR failure due to not receiving signal 3 lossOfPower ATUR failure due to loss of power 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. This is intended to supplement ifOperStatus." ::= { adslAturPhysEntry 6 }

    Information by cisco_v1

    adslAturCurrStatus OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Indicates current state of the ATUR line. This is a bit-map of possible conditions. Due to the isolation of the ATUR when line problems occur, many state conditions like loss of power, loss of quality signal, and initialization errors, can not be determined. While trouble shooting ATUR, also use object, adslAtucCurrStatus. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming ATUR failure due to not receiving valid frame 2 lossOfSignal ATUR failure due to not receiving signal 3 lossOfPower ATUR failure due to loss of power 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. This is intended to supplement ifOperStatus." ::= { adslAturPhysEntry 6 }

    Information by oid_info

    Defined in RFC2662

    Information by mibdepot

    adslAturCurrStatus OBJECT-TYPE SYNTAX BITS { noDefect(0), lossOfFraming(1), lossOfSignal(2), lossOfPower(3), lossOfSignalQuality(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current state of the ATUR line. This is a bit-map of possible conditions. Due to the isolation of the ATUR when line problems occur, many state conditions like loss of power, loss of quality signal, and initialization errors, can not be determined. While trouble shooting ATUR, also use object, adslAtucCurrStatus. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming ATUR failure due to not receiving valid frame 2 lossOfSignal ATUR failure due to not receiving signal 3 lossOfPower ATUR failure due to loss of power 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. This is intended to supplement ifOperStatus." ::= { adslAturPhysEntry 6 }

    Information by cisco

    adslAturCurrStatus OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current state of the ATUR line. This is a bit-map of possible conditions. Due to the isolation of the ATUR when line problems occur, many state conditions like loss of power, loss of quality signal, and initialization errors, can not be determined. While trouble shooting ATUR, also use object, adslAtucCurrStatus. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming ATUR failure due to not receiving valid frame 2 lossOfSignal ATUR failure due to not receiving signal 3 lossOfPower ATUR failure due to loss of power 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. This is intended to supplement ifOperStatus." ::= { adslAturPhysEntry 6 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (7)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.94.1.1.3.1.1 adslAturInvSerialNumber 0 0 Vendor specific string that identifies the vendor
    equipment.
    1.3.6.1.2.1.10.94.1.1.3.1.2 adslAturInvVendorID 0 0 The vendor ID assigned by T1E1.413 according to its
    Annex D.
    1.3.6.1.2.1.10.94.1.1.3.1.3 adslAturInvVersionNumber 0 0 Vendor specific version number sent by this ATU as
    part of the initialization messages.
    1.3.6.1.2.1.10.94.1.1.3.1.4 adslAturCurrSnrMgn 0 0 Noise Margin as seen by this ATU with respect to its
    received signal in tenth dB.
    1.3.6.1.2.1.10.94.1.1.3.1.5 adslAturCurrAtn 0 0 Measured difference in the total power transmitted by
    the peer ATU and the total power received by this ATU.
    1.3.6.1.2.1.10.94.1.1.3.1.7 adslAturCurrOutputPwr 0 0 Measured total output power transmitted by this ATU.
    This is the measurement that was reported during
    the last activation sequenc…
    1.3.6.1.2.1.10.94.1.1.3.1.8 adslAturCurrAttainableRate 0 0 Indicates the maximum currently attainable data rate
    by the ATU. This value will be equal or greater than
    the current line rate.