pimAnycastRPSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF PimAnycastRPSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage Anycast-RP via PIM Register
messages, as opposed to via other protocols such as MSDP
(Multicast Source Discovery Protocol).
Entries must be configured in this table if and only if the
local router is a member of one or more Anycast-RP sets,
that is, one or more Anycast-RP addresses are assigned to
the local router. Note that if using static RP
configuration, this is in addition to, not instead of, the
pimStaticRPTable entries that must be configured for the
Anycast-RPs.
The set of rows with the same values of both
pimAnycastRPSetAddressType and pimAnycastRPSetAnycastAddress
corresponds to the Anycast-RP set for that Anycast-RP
address.
When an Anycast-RP set configuration is active, one entry
per pimAnycastRPSetAnycastAddress corresponds to the local
router. The local router is identified by the
pimAnycastRpSetLocalRouter object. That entry determines
the source address used by the local router when forwarding
PIM Register messages within the Anycast-RP set."
REFERENCE "RFC 4610, RFC 3618"
View at oid-info.com
This table is used to manage Anycast-RP via PIM Register
messages, as opposed to via other protocols such as MSDP
(Multicast Source Discovery Protocol).
Entries must be configured in this table if and only if the
local router is a member of one or more Anycast-RP sets,
that is, one or more Anycast-RP addresses are assigned to
the local router. Note that if using static RP
configuration, this is in addition to, not instead of, the
pimStaticRPTable entries that must be configured for the
Anycast-RPs.
The set of rows with the same values of both
pimAnycastRPSetAddressType and pimAnycastRPSetAnycastAddress
corresponds to the Anycast-RP set for that Anycast-RP
address.
When an Anycast-RP set configuration is active, one entry
per pimAnycastRPSetAnycastAddress corresponds to the local
router. The local router is identified by the
pimAnycastRpSetLocalRouter object. That entry determines
the source address used by the local router when forwarding
PIM Register messages within the Anycast-RP set.
Parsed from file rfc5060-Protocol-Independent-Multicast-PIM.mib.txt
Company: None
Module: PIM-STD-MIB
This table is used to manage Anycast-RP via PIM Register
messages, as opposed to via other protocols such as MSDP
(Multicast Source Discovery Protocol).
Entries must be configured in this table if and only if the
local router is a member of one or more Anycast-RP sets,
that is, one or more Anycast-RP addresses are assigned to
the local router. Note that if using static RP
configuration, this is in addition to, not instead of, the
pimStaticRPTable entries that must be configured for the
Anycast-RPs.
The set of rows with the same values of both
pimAnycastRPSetAddressType and pimAnycastRPSetAnycastAddress
corresponds to the Anycast-RP set for that Anycast-RP
address.
When an Anycast-RP set configuration is active, one entry
per pimAnycastRPSetAnycastAddress corresponds to the local
router. The local router is identified by the
pimAnycastRpSetLocalRouter object. That entry determines
the source address used by the local router when forwarding
PIM Register messages within the Anycast-RP set.
Parsed from file PIM-STD-MIB.mib
Module: PIM-STD-MIB
Automatically extracted from RFC5060
pimAnycastRPSetTable OBJECT-TYPE SYNTAX SEQUENCE OF PimAnycastRPSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage Anycast-RP via PIM Register messages, as opposed to via other protocols such as MSDP (Multicast Source Discovery Protocol). Entries must be configured in this table if and only if the local router is a member of one or more Anycast-RP sets, that is, one or more Anycast-RP addresses are assigned to the local router. Note that if using static RP configuration, this is in addition to, not instead of, the pimStaticRPTable entries that must be configured for the Anycast-RPs. The set of rows with the same values of both pimAnycastRPSetAddressType and pimAnycastRPSetAnycastAddress corresponds to the Anycast-RP set for that Anycast-RP address. When an Anycast-RP set configuration is active, one entry per pimAnycastRPSetAnycastAddress corresponds to the local router. The local router is identified by the pimAnycastRpSetLocalRouter object. That entry determines the source address used by the local router when forwarding PIM Register messages within the Anycast-RP set." REFERENCE "RFC 4610, RFC 3618" ::= { pim 12 }
pimAnycastRPSetTable OBJECT-TYPE SYNTAX SEQUENCE OF PimAnycastRPSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage Anycast-RP via PIM Register messages, as opposed to via other protocols such as MSDP (Multicast Source Discovery Protocol). Entries must be configured in this table if and only if the local router is a member of one or more Anycast-RP sets, that is, one or more Anycast-RP addresses are assigned to the local router. Note that if using static RP configuration, this is in addition to, not instead of, the pimStaticRPTable entries that must be configured for the Anycast-RPs. The set of rows with the same values of both pimAnycastRPSetAddressType and pimAnycastRPSetAnycastAddress corresponds to the Anycast-RP set for that Anycast-RP address. When an Anycast-RP set configuration is active, one entry per pimAnycastRPSetAnycastAddress corresponds to the local router. The local router is identified by the pimAnycastRpSetLocalRouter object. That entry determines the source address used by the local router when forwarding PIM Register messages within the Anycast-RP set." REFERENCE "RFC 4610, RFC 3618" ::= { pim 12 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.157.1.12.1 | pimAnycastRPSetEntry | 6 | 6 | An entry corresponds to a single router within a particular Anycast-RP set. This entry is preserved on agent restart. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.157.1.1 | pimInterfaceTable | 1 | 29 | The (conceptual) table listing the router's PIM interfaces. PIM is enabled on all interfaces listed in this table. |
| 1.3.6.1.2.1.157.1.2 | pimNeighborTable | 1 | 16 | The (conceptual) table listing the router's PIM neighbors. |
| 1.3.6.1.2.1.157.1.3 | pimNbrSecAddressTable | 1 | 5 | The (conceptual) table listing the secondary addresses advertised by each PIM neighbor (on a subset of the rows of the pimNeighbo… |
| 1.3.6.1.2.1.157.1.4 | pimStarGTable | 1 | 21 | The (conceptual) table listing the non-interface specific (*,G) state that PIM has. |
| 1.3.6.1.2.1.157.1.5 | pimStarGITable | 1 | 13 | The (conceptual) table listing the interface-specific (*,G) state that PIM has. |
| 1.3.6.1.2.1.157.1.6 | pimSGTable | 1 | 28 | The (conceptual) table listing the non-interface specific (S,G) state that PIM has. |
| 1.3.6.1.2.1.157.1.7 | pimSGITable | 1 | 13 | The (conceptual) table listing the interface-specific (S,G) state that PIM has. |
| 1.3.6.1.2.1.157.1.8 | pimSGRptTable | 1 | 5 | The (conceptual) table listing the non-interface specific (S,G,rpt) state that PIM has. |
| 1.3.6.1.2.1.157.1.9 | pimSGRptITable | 1 | 7 | The (conceptual) table listing the interface-specific (S,G,rpt) state that PIM has. |
| 1.3.6.1.2.1.157.1.10 | pimBidirDFElectionTable | 1 | 11 | The (conceptual) table listing the per-RP Designated Forwarder (DF) Election state for each interface for all the RPs in BIDIR mo… |
| 1.3.6.1.2.1.157.1.11 | pimStaticRPTable | 1 | 10 | This table is used to manage static configuration of RPs. If the group prefixes configured for two or more rows in this table ove… |
| 1.3.6.1.2.1.157.1.13 | pimGroupMappingTable | 1 | 9 | The (conceptual) table listing mappings from multicast group prefixes to the PIM mode and RP address to use for groups within tha… |
| 1.3.6.1.2.1.157.1.14 | pimKeepalivePeriod | 1 | 1 | The duration of the Keepalive Timer. This is the period during which the PIM router will maintain (S,G) state in the absence of … |
| 1.3.6.1.2.1.157.1.15 | pimRegisterSuppressionTime | 1 | 1 | The duration of the Register Suppression Timer. This is the period during which a PIM Designated Router (DR) stops sending Regis… |
| 1.3.6.1.2.1.157.1.16 | pimStarGEntries | 1 | 1 | The number of entries in the pimStarGTable. |
| 1.3.6.1.2.1.157.1.17 | pimStarGIEntries | 1 | 1 | The number of entries in the pimStarGITable. |
| 1.3.6.1.2.1.157.1.18 | pimSGEntries | 1 | 1 | The number of entries in the pimSGTable. |
| 1.3.6.1.2.1.157.1.19 | pimSGIEntries | 1 | 1 | The number of entries in the pimSGITable. |
| 1.3.6.1.2.1.157.1.20 | pimSGRptEntries | 1 | 1 | The number of entries in the pimSGRptTable. |
| 1.3.6.1.2.1.157.1.21 | pimSGRptIEntries | 1 | 1 | The number of entries in the pimSGRptITable. |
| 1.3.6.1.2.1.157.1.22 | pimOutAsserts | 1 | 1 | The number of Asserts sent by this router. Discontinuities in the value of this counter can occur at re-initialization of the man… |
| 1.3.6.1.2.1.157.1.23 | pimInAsserts | 1 | 1 | The number of Asserts received by this router. Asserts are multicast to all routers on a network. This counter is incremented b… |
| 1.3.6.1.2.1.157.1.24 | pimLastAssertInterface | 1 | 1 | The interface on which this router most recently sent or received an assert, or zero if this router has not sent or received an a… |
| 1.3.6.1.2.1.157.1.25 | pimLastAssertGroupAddressType | 1 | 1 | The address type of the multicast group address in the most recently sent or received assert. If this router has not sent or rec… |
| 1.3.6.1.2.1.157.1.26 | pimLastAssertGroupAddress | 1 | 1 | The multicast group address in the most recently sent or received assert. The InetAddressType is given by the pimLastAssertGroup… |
| 1.3.6.1.2.1.157.1.27 | pimLastAssertSourceAddressType | 1 | 1 | The address type of the source address in the most recently sent or received assert. If the most recent assert was (*,G), or if … |
| 1.3.6.1.2.1.157.1.28 | pimLastAssertSourceAddress | 1 | 1 | The source address in the most recently sent or received assert. The InetAddressType is given by the pimLastAssertSourceAddressT… |
| 1.3.6.1.2.1.157.1.29 | pimNeighborLossNotificationPeriod | 1 | 1 | The minimum time that must elapse between pimNeighborLoss notifications originated by this router. The maximum value 65535 repre… |
| 1.3.6.1.2.1.157.1.30 | pimNeighborLossCount | 1 | 1 | The number of neighbor loss events that have occurred. This counter is incremented when the neighbor timer expires, and the route… |
| 1.3.6.1.2.1.157.1.31 | pimInvalidRegisterNotificationPeriod | 1 | 1 | The minimum time that must elapse between pimInvalidRegister notifications originated by this router. The default value of 65535 … |
| 1.3.6.1.2.1.157.1.32 | pimInvalidRegisterMsgsRcvd | 1 | 1 | The number of invalid PIM Register messages that have been received by this device. A PIM Register message is invalid if either o … |
| 1.3.6.1.2.1.157.1.33 | pimInvalidRegisterAddressType | 1 | 1 | The address type stored in pimInvalidRegisterOrigin, pimInvalidRegisterGroup, and pimInvalidRegisterRp. If no invalid Register me… |
| 1.3.6.1.2.1.157.1.34 | pimInvalidRegisterOrigin | 1 | 1 | The source address of the last invalid Register message received by this device. |
| 1.3.6.1.2.1.157.1.35 | pimInvalidRegisterGroup | 1 | 1 | The IP multicast group address to which the last invalid Register message received by this device was addressed. |
| 1.3.6.1.2.1.157.1.36 | pimInvalidRegisterRp | 1 | 1 | The RP address to which the last invalid Register message received by this device was delivered. |
| 1.3.6.1.2.1.157.1.37 | pimInvalidJoinPruneNotificationPeriod | 1 | 1 | The minimum time that must elapse between pimInvalidJoinPrune notifications originated by this router. The default value of 65535… |
| 1.3.6.1.2.1.157.1.38 | pimInvalidJoinPruneMsgsRcvd | 1 | 1 | The number of invalid PIM Join/Prune messages that have been received by this device. A PIM Join/Prune message is invalid if eith… |
| 1.3.6.1.2.1.157.1.39 | pimInvalidJoinPruneAddressType | 1 | 1 | The address type stored in pimInvalidJoinPruneOrigin, pimInvalidJoinPruneGroup, and pimInvalidJoinPruneRp. If no invalid Join/Pru… |
| 1.3.6.1.2.1.157.1.40 | pimInvalidJoinPruneOrigin | 1 | 1 | The source address of the last invalid Join/Prune message received by this device. |
| 1.3.6.1.2.1.157.1.41 | pimInvalidJoinPruneGroup | 1 | 1 | The IP multicast group address carried in the last invalid Join/Prune message received by this device. |
| 1.3.6.1.2.1.157.1.42 | pimInvalidJoinPruneRp | 1 | 1 | The RP address carried in the last invalid Join/Prune message received by this device. |
| 1.3.6.1.2.1.157.1.43 | pimRPMappingNotificationPeriod | 1 | 1 | The minimum time that must elapse between pimRPMappingChange notifications originated by this router. The default value of 65535 … |
| 1.3.6.1.2.1.157.1.44 | pimRPMappingChangeCount | 1 | 1 | The number of changes to active RP mappings on this device. Information about active RP mappings is available in pimGroupMappingT… |
| 1.3.6.1.2.1.157.1.45 | pimInterfaceElectionNotificationPeriod | 1 | 1 | The minimum time that must elapse between pimInterfaceElection notifications originated by this router. The default value of 655… |
| 1.3.6.1.2.1.157.1.46 | pimInterfaceElectionWinCount | 1 | 1 | The number of times this device has been elected DR or DF on any interface. Elections occur frequently on newly-active interfaces… |
| 1.3.6.1.2.1.157.1.47 | pimRefreshInterval | 1 | 1 | The interval between successive State Refresh messages sent by an Originator. This timer period is called the RefreshInterval in… |
| 1.3.6.1.2.1.157.1.48 | pimDeviceConfigStorageType | 1 | 1 | The storage type used for the global PIM configuration of this device, comprised of the objects listed below. If this storage ty… |