When this object is set to LOAD (2) or STORE (3), the
device will discontinue its normal operation and begin
loading or storing of the image specified by probeDownloadFile
using the TFTP protocol. If LOAD(2) is specified, the new image
is copied from the TFTP Server to the unit. If STORE(3)is specified
the image is written to the TFTP Server.
Parsed from file REMOTEACCESS-MIB.mib
Module: REMOTEACCESS-MIB
When this object is set to downloadToRAM(2) or
downloadToPROM(3), the device will discontinue its
normal operation and begin download of the image specified
by probeDownloadFile from the server specified by
probeDownloadTFTPServer using the TFTP protocol. If
downloadToRAM(2) is specified, the new image is copied
to RAM only (the old image remains unaltered in the flash
EPROM). If downloadToPROM(3) is specified
the new image is written to the flash EPROM
memory after its checksum has been verified to be correct.
When the download process is completed, the device will
warm boot to restart the newly loaded application.
When the device is not downloading, this object will have
a value of notDownloading(1).
probeDownloadAction OBJECT-TYPE
SYNTAX INTEGER {
notDownloading(1),
downloadToPROM(2),
downloadToRAM(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to downloadToRAM(2) or
downloadToPROM(3), the device will discontinue its
normal operation and begin download of the image specified
by probeDownloadFile from the server specified by
probeDownloadTFTPServer using the TFTP protocol. If
downloadToRAM(2) is specified, the new image is copied
to RAM only (the old image remains unaltered in the flash
EPROM). If downloadToPROM(3) is specified
the new image is written to the flash EPROM
memory after its checksum has been verified to be correct.
When the download process is completed, the device will
warm boot to restart the newly loaded application.
When the device is not downloading, this object will have
a value of notDownloading(1)."
View at oid-info.com
When this object is set to downloadToRAM(3) or
downloadToPROM(2), the device will discontinue its
normal operation and begin download of the image specified
by probeDownloadFile from the server specified by
probeDownloadTFTPServer using the TFTP protocol. If
downloadToRAM(3) is specified, the new image is copied
to RAM only (the old image remains unaltered in the flash
EPROM). If downloadToPROM(2) is specified,
the new image is written to the flash EPROM
memory after its checksum has been verified to be correct.
When the download process is completed, the device will
warm boot to restart the newly loaded application.
When the device is not downloading, this object will have
a value of notDownloading(1).
This object has been deprecated, as it has not had enough
independent implementations to demonstrate interoperability to
meet the requirements of a Draft Standard.
Parsed from file rmon2.mib.txt
Company: None
Module: RMON2-MIB
When this object is set to downloadToRAM(2) or
downloadToPROM(3), the device will discontinue its
normal operation and begin download of the image specified
by probeDownloadFile from the server specified by
probeDownloadTFTPServer using the TFTP protocol. If
downloadToRAM(2) is specified, the new image is copied
to RAM only (the old image remains unaltered in the flash
EPROM). If downloadToPROM(3) is specified
the new image is written to the flash EPROM
memory after its checksum has been verified to be correct.
When the download process is completed, the device will
warm boot to restart the newly loaded application.
When the device is not downloading, this object will have
a value of notDownloading(1).
tftpAction OBJECT-TYPE SYNTAX INTEGER { idle(1), load(2), store(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is set to LOAD (2) or STORE (3), the device will discontinue its normal operation and begin loading or storing of the image specified by probeDownloadFile using the TFTP protocol. If LOAD(2) is specified, the new image is copied from the TFTP Server to the unit. If STORE(3)is specified the image is written to the TFTP Server." ::= { tftp 8 }
probeDownloadAction OBJECT-TYPE SYNTAX INTEGER { notDownloading(1), downloadToPROM(2), downloadToRAM(3) } ACCESS read-write STATUS mandatory DESCRIPTION "When this object is set to downloadToRAM(2) or downloadToPROM(3), the device will discontinue its normal operation and begin download of the image specified by probeDownloadFile from the server specified by probeDownloadTFTPServer using the TFTP protocol. If downloadToRAM(2) is specified, the new image is copied to RAM only (the old image remains unaltered in the flash EPROM). If downloadToPROM(3) is specified the new image is written to the flash EPROM memory after its checksum has been verified to be correct. When the download process is completed, the device will warm boot to restart the newly loaded application. When the device is not downloading, this object will have a value of notDownloading(1)." ::= { probeConfig 8 }
Automatically extracted from RFC2021
probeDownloadAction OBJECT-TYPE SYNTAX INTEGER { notDownloading(1), downloadToPROM(2), downloadToRAM(3) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "When this object is set to downloadToRAM(3) or downloadToPROM(2), the device will discontinue its normal operation and begin download of the image specified by probeDownloadFile from the server specified by probeDownloadTFTPServer using the TFTP protocol. If downloadToRAM(3) is specified, the new image is copied to RAM only (the old image remains unaltered in the flash EPROM). If downloadToPROM(2) is specified, the new image is written to the flash EPROM memory after its checksum has been verified to be correct. When the download process is completed, the device will warm boot to restart the newly loaded application. When the device is not downloading, this object will have a value of notDownloading(1). This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard." ::= { probeConfig 8 }
probeDownloadAction OBJECT-TYPE SYNTAX INTEGER { notDownloading(1), downloadToPROM(2), downloadToRAM(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is set to downloadToRAM(2) or downloadToPROM(3), the device will discontinue its normal operation and begin download of the image specified by probeDownloadFile from the server specified by probeDownloadTFTPServer using the TFTP protocol. If downloadToRAM(2) is specified, the new image is copied to RAM only (the old image remains unaltered in the flash EPROM). If downloadToPROM(3) is specified the new image is written to the flash EPROM memory after its checksum has been verified to be correct. When the download process is completed, the device will warm boot to restart the newly loaded application. When the device is not downloading, this object will have a value of notDownloading(1)." ::= { probeConfig 8 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.16.19.8.0 | 0 | 0 | 0 | TFTPAction |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.16.19.1 | probeCapabilities | 1 | 1 | An indication of the RMON MIB groups supported on at least one interface by this probe. |
1.3.6.1.2.1.16.19.2 | probeSoftwareRev | 1 | 1 | The software revision of this device. This string will have a zero length if the revision is unknown. |
1.3.6.1.2.1.16.19.3 | probeHardwareRev | 1 | 1 | The hardware revision of this device. This string will have a zero length if the revision is unknown. |
1.3.6.1.2.1.16.19.4 | probeDateTime | 1 | 1 | probeDateTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 8 | 11)) MAX-ACCESS read-write STATUS current DESCRIPTION "Probes curr… |
1.3.6.1.2.1.16.19.5 | probeResetControl | 1 | 1 | Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters sa… |
1.3.6.1.2.1.16.19.6 | probeDownloadFile, TFTPFile | 1 | 1 | The file name to be downloaded from the TFTP server when a download is next requested via this MIB. This value is set to the zer… |
1.3.6.1.2.1.16.19.7 | probeDownloadTFTPServer, TFTPServerIP | 1 | 1 | The IP address of the TFTP server that contains the boot image to load when a download is next requested via this MIB. This value… |
1.3.6.1.2.1.16.19.9 | probeDownloadStatus, TFTPStatus | 1 | 1 | The status of the last download procedure, if any. This object will have a value of StatusUnknown(2) if no LOAD or STORE process… |
1.3.6.1.2.1.16.19.10 | serialConfigTable | 1 | 10 | A table of serial interface configuration entries. This data will be stored in non-volatile memory and preserved across probe re… |
1.3.6.1.2.1.16.19.11 | netConfigTable | 1 | 6 | A table of netConfigEntries. |
1.3.6.1.2.1.16.19.12 | netDefaultGateway | 1 | 1 | The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0. |
1.3.6.1.2.1.16.19.13 | trapDestTable | 1 | 7 | A list of trap destination entries. |
1.3.6.1.2.1.16.19.14 | serialConnectionTable | 1 | 10 | A list of serialConnectionEntries. |
1.3.6.1.2.1.16.19.15 | smonCapabilities | 1 | 1 | An indication of the SMON MIB groups supported by this agent. |
1.3.6.1.2.1.16.19.16 | hcRMONCapabilities | 1 | 1 | An indication of the High Capacity RMON MIB groups supported on at least one interface by this probe. |