The type(s) of sorting capabilities supported by the agent.
If the agent supports usrTopN functionality, then the 'usrTopN'
bit will be set. A management application SHOULD NOT try to
access the usrTopN functionality if this bit is not set.
If the agent can perform sorting of interfaces according to the
values of ifInOctets, as defined in [20],
then the 'ifInOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInUcastPkts, as defined in [20],
then the 'ifInUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInNUcastPkts, as defined in [20],
then the 'ifInNUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInDiscards, as defined in [20],
then the 'ifInDiscards' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInErrors, as defined in [20],
then the 'ifInErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInUnknownProtocols, as defined in [20],
then the 'ifInUnknownProtocols' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutOctets, as defined in [20],
then the 'ifOutOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutUcastPackets, as defined in [20],
then the 'ifOutUcastPackets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutNUcastPackets, as defined in [20],
then the 'ifOutNUcastPackets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutDiscards, as defined in [20],
then the 'ifOutDiscards' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutErrors, as defined in [20],
then the 'ifOutErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInMulticastPkts, as defined in [20],
then the 'ifInMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInBroadcastPkts, as defined in [20],
then the 'ifInBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutMulticastPkts, as defined in [20],
then the 'ifOutMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutBroadcastPkts, as defined in [20],
then the 'ifOutBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInOctes, as defined in [20],
then the 'ifHCInOctes' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInMulticastPkts, as defined in [20],
then the 'ifHCInMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInBroadcastPkts, as defined in [20],
then the 'ifHCInBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutOctets, as defined in [20],
then the 'ifHCOutOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutUcastPkts, as defined in [20],
then the 'ifHCOutUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutMulticastPkts, as defined in [20],
then the 'ifHCOutMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutBroadcastPkts, as defined in [20],
then the 'ifHCOutBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsAlignementErrors, as defined in [23],
then the 'dot3StatsAlignementErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsFCSErrors, as defined in [23],
then the 'dot3StatsFCSErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSingleCollisionFrames, as defined in [23],
then the 'dot3StatsSingleCollisionFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSQETestErrors, as defined in [23],
then the 'dot3StatsSQETestErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsDeferredTransmissions, as defined in [23],
then the 'dot3StatsDeferredTransmissions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsLateCollisions, as defined in [23],
then the 'dot3StatsLateCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsExcessiveCollisions, as defined in [23],
then the 'dot3StatsExcessiveCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsInternalMacTransmitErrors, as defined in [23],
then the 'dot3StatsInternalMacTransmitErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsCarrierSenseErrors, as defined in [23],
then the 'dot3StatsCarrierSenseErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsFrameTooLongs, as defined in [23],
then the 'dot3StatsFrameTooLongs' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsInternalMacReceiveErrors, as defined in [23],
then the 'dot3StatsInternalMacReceiveErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSymbolErrors, as defined in [23],
then the 'dot3StatsSymbolErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLineErrors, as defined in [24],
then the 'dot5StatsLineErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsBurstErrors, as defined in [24],
then the 'dot5StatsBurstErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsACErrors, as defined in [24],
then the 'dot5StatsACErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsAbortTransErrors, as defined in [24],
then the 'dot5StatsAbortTransErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsInternalErrors, as defined in [24],
then the 'dot5StatsInternalErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLostFrameErrors, as defined in [24],
then the 'dot5StatsLostFrameErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsReceiveCongestionErrors, as defined in [24],
then the 'dot5StatsReceiveCongestionErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsFrameCopiedErrors, as defined in [24],
then the 'dot5StatsFrameCopiedErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsTokenErrors, as defined in [24],
then the 'dot5StatsTokenErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSoftErrors, as defined in [24],
then the 'dot5StatsSoftErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsHardErrors, as defined in [24],
then the 'dot5StatsHardErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSignalLoss, as defined in [24],
then the 'dot5StatsSignalLoss' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsTransmitBeacons, as defined in [24],
then the 'dot5StatsTransmitBeacons' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsRecoverys, as defined in [24],
then the 'dot5StatsRecoverys' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLobeWires, as defined in [24],
then the 'dot5StatsLobeWires' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsRemoves, as defined in [24],
then the 'dot5StatsRemoves' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSingles, as defined in [24],
then the 'dot5StatsSingles' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsFreqErrors, as defined in [24],
then the 'dot5StatsFreqErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsDropEvents, as defined in [17],
then the 'etherStatsDropEvents' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsOctets, as defined in [17],
then the 'etherStatsOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts, as defined in [17],
then the 'etherStatsPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsBroadcastPkts, as defined in [17],
then the 'etherStatsBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsMulticastPkts, as defined in [17],
then the 'etherStatsMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsCRCAlignErrors, as defined in [17],
then the 'etherStatsCRCAlignErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsUndersizePkts, as defined in [17],
then the 'etherStatsUndersizePkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsOversizePkts, as defined in [17],
then the 'etherStatsOversizePkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsFragments, as defined in [17],
then the 'etherStatsFragments' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsJabbers, as defined in [17],
then the 'etherStatsJabbers' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsCollisions, as defined in [17],
then the 'etherStatsCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts64Octets, as defined in [17],
then the 'etherStatsPkts64Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts65to127Octets, as defined in [17],
then the 'etherStatsPkts65to127Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts128to255Octets, as defined in [17],
then the 'etherStatsPkts128to255Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts256to511Octets, as defined in [17],
then the 'etherStatsPkts256to511Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts512to1023Octets, as defined in [17],
then the 'etherStatsPkts512to1023Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts1024to1518Octets, as defined in [17],
then the 'etherStatsPkts1024to1518Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortInFrames, as defined in [25],
then the 'dot1dTpPortInFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortOutFrames, as defined in [25],
then the 'dot1dTpPortOutFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortInDiscards, as defined in [25],
then the 'dot1dTpPortInDiscards' bit will be set.
Parsed from file INTERFACETOPN-MIB.mib
Module: INTERFACETOPN-MIB
The type(s) of sorting capabilities supported by the agent.
If the agent can perform sorting of interfaces according to the
values of ifInOctets, as defined in [RFC2863],
then the 'ifInOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInUcastPkts, as defined in [RFC2863],
then the 'ifInUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInNUcastPkts, as defined in [RFC2863],
then the 'ifInNUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInDiscards, as defined in [RFC2863],
then the 'ifInDiscards' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInErrors, as defined in [RFC2863],
then the 'ifInErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInUnknownProtocols, as defined in [RFC2863],
then the 'ifInUnknownProtocols' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutOctets, as defined in [RFC2863],
then the 'ifOutOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutUcastPackets, as defined in [RFC2863],
then the 'ifOutUcastPackets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutNUcastPackets, as defined in [RFC2863],
then the 'ifOutNUcastPackets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutDiscards, as defined in [RFC2863],
then the 'ifOutDiscards' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutErrors, as defined in [RFC2863],
then the 'ifOutErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInMulticastPkts, as defined in [RFC2863],
then the 'ifInMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInBroadcastPkts, as defined in [RFC2863],
then the 'ifInBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutMulticastPkts, as defined in [RFC2863],
then the 'ifOutMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutBroadcastPkts, as defined in [RFC2863],
then the 'ifOutBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInOctets, as defined in [RFC2863],
then the 'ifHCInOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInMulticastPkts, as defined in [RFC2863],
then the 'ifHCInMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInBroadcastPkts, as defined in [RFC2863],
then the 'ifHCInBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutOctets, as defined in [RFC2863],
then the 'ifHCOutOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutUcastPkts, as defined in [RFC2863],
then the 'ifHCOutUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutMulticastPkts, as defined in [RFC2863],
then the 'ifHCOutMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutBroadcastPkts, as defined in [RFC2863],
then the 'ifHCOutBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsAlignmentErrors, as defined in [RFC2665],
then the 'dot3StatsAlignmentErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsFCSErrors, as defined in [RFC2665],
then the 'dot3StatsFCSErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSingleCollisionFrames, as defined in
[RFC2665],then the 'dot3StatsSingleCollisionFrames' bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSQETestErrors, as defined in [RFC2665],
then the 'dot3StatsSQETestErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsDeferredTransmissions, as defined in
[RFC2665], then the 'dot3StatsDeferredTransmissions' bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsLateCollisions, as defined in [RFC2665],
then the 'dot3StatsLateCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsExcessiveCollisions, as defined in [RFC2665],
then the 'dot3StatsExcessiveCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsInternalMacTxErrors, as defined in
[RFC2665],then the 'dot3StatsInternalMacTxErrors' bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsCarrierSenseErrors, as defined in [RFC2665],
then the 'dot3StatsCarrierSenseErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsFrameTooLongs, as defined in [RFC2665],
then the 'dot3StatsFrameTooLongs' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsInternalMacRxErrors, as defined in
[RFC2665], then the 'dot3StatsInternalMacRxErrors' bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSymbolErrors, as defined in [RFC2665],
then the 'dot3StatsSymbolErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3InPauseFrames, as defined in [RFC2665],
then the 'dot3InPauseFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3OutPauseFrames, as defined in [RFC2665],
then the 'dot3OutPauseFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLineErrors, as defined in [RFC1748],
then the 'dot5StatsLineErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsBurstErrors, as defined in [RFC1748],
then the 'dot5StatsBurstErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsACErrors, as defined in [RFC1748],
then the 'dot5StatsACErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsAbortTransErrors, as defined in [RFC1748],
then the 'dot5StatsAbortTransErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsInternalErrors, as defined in [RFC1748],
then the 'dot5StatsInternalErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLostFrameErrors, as defined in [RFC1748],
then the 'dot5StatsLostFrameErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsReceiveCongestionErrors, as defined in
[RFC1748], then the 'dot5StatsReceiveCongestionErrors' bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsFrameCopiedErrors, as defined in [RFC1748],
then the 'dot5StatsFrameCopiedErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsTokenErrors, as defined in [RFC1748],
then the 'dot5StatsTokenErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSoftErrors, as defined in [RFC1748],
then the 'dot5StatsSoftErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsHardErrors, as defined in [RFC1748],
then the 'dot5StatsHardErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSignalLoss, as defined in [RFC1748],
then the 'dot5StatsSignalLoss' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsTransmitBeacons, as defined in [RFC1748],
then the 'dot5StatsTransmitBeacons' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsRecoverys, as defined in [RFC1748],
then the 'dot5StatsRecoverys' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLobeWires, as defined in [RFC1748],
then the 'dot5StatsLobeWires' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsRemoves, as defined in [RFC1748],
then the 'dot5StatsRemoves' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSingles, as defined in [RFC1748],
then the 'dot5StatsSingles' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsFreqErrors, as defined in [RFC1748],
then the 'dot5StatsFreqErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsDropEvents, as defined in [RFC2819],
then the 'etherStatsDropEvents' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsOctets, as defined in [RFC2819],
then the 'etherStatsOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts, as defined in [RFC2819],
then the 'etherStatsPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsBroadcastPkts, as defined in [RFC2819],
then the 'etherStatsBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsMulticastPkts, as defined in [RFC2819],
then the 'etherStatsMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsCRCAlignErrors, as defined in [RFC2819],
then the 'etherStatsCRCAlignErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsUndersizePkts, as defined in [RFC2819],
then the 'etherStatsUndersizePkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsOversizePkts, as defined in [RFC2819],
then the 'etherStatsOversizePkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsFragments, as defined in [RFC2819],
then the 'etherStatsFragments' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsJabbers, as defined in [RFC2819],
then the 'etherStatsJabbers' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsCollisions, as defined in [RFC2819],
then the 'etherStatsCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts64Octets, as defined in [RFC2819],
then the 'etherStatsPkts64Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts65to127Octets, as defined in [RFC2819],
then the 'etherStatsPkts65to127Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts128to255Octets, as defined in [RFC2819],
then the 'etherStatsPkts128to255Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts256to511Octets, as defined in [RFC2819],
then the 'etherStatsPkts256to511Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts512to1023Octets, as defined in [RFC2819],
then the 'etherStatsPkts512to1023Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts1024to1518Octets, as defined in
[RFC2819], then the 'etherStatsPkts1024to1518Octets' bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortInFrames, as defined in [RFC1493],
then the 'dot1dTpPortInFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortOutFrames, as defined in [RFC1493],
then the 'dot1dTpPortOutFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortInDiscards, as defined in [RFC1493],
then the 'dot1dTpPortInDiscards' bit will be set.
interfaceTopNCaps OBJECT-TYPE
SYNTAX BITS {
ifInOctets(0),
ifInUcastPkts(1),
ifInNUcastPkts(2),
ifInDiscards(3),
ifInErrors(4),
ifInUnknownProtos(5),
ifOutOctets(6),
ifOutUcastPkts(7),
ifOutNUcastPkts(8),
ifOutDiscards(9),
ifOutErrors(10),
ifInMulticastPkts(11),
ifInBroadcastPkts(12),
ifOutMulticastPkts(13),
ifOutBroadcastPkts(14),
ifHCInOctets(15),
ifHCInUcastPkts(16),
ifHCInMulticastPkts(17),
ifHCInBroadcastPkts(18),
ifHCOutOctets(19),
ifHCOutUcastPkts(20),
ifHCOutMulticastPkts(21),
ifHCOutBroadcastPkts(22),
dot3StatsAlignmentErrors(23),
dot3StatsFCSErrors(24),
dot3StatsSingleCollisionFrames(25),
dot3StatsMultipleCollisionFrames(26),
dot3StatsSQETestErrors(27),
dot3StatsDeferredTransmissions(28),
dot3StatsLateCollisions(29),
dot3StatsExcessiveCollisions(30),
dot3StatsInternalMacTxErrors(31),
dot3StatsCarrierSenseErrors(32),
dot3StatsFrameTooLongs(33),
dot3StatsInternalMacRxErrors(34),
dot3StatsSymbolErrors(35),
dot3InPauseFrames(36),
dot3OutPauseFrames(37),
dot5StatsLineErrors(38),
dot5StatsBurstErrors(39),
dot5StatsACErrors(40),
dot5StatsAbortTransErrors(41),
dot5StatsInternalErrors(42),
dot5StatsLostFrameErrors(43),
dot5StatsReceiveCongestions(44),
dot5StatsFrameCopiedErrors(45),
dot5StatsTokenErrors(46),
dot5StatsSoftErrors(47),
dot5StatsHardErrors(48),
dot5StatsSignalLoss(49),
dot5StatsTransmitBeacons(50),
dot5StatsRecoverys(51),
dot5StatsLobeWires(52),
dot5StatsRemoves(53),
dot5StatsSingles(54),
dot5StatsFreqErrors(55),
etherStatsDropEvents(56),
etherStatsOctets(57),
etherStatsPkts(58),
etherStatsBroadcastPkts(59),
etherStatsMulticastPkts(60),
etherStatsCRCAlignErrors(61),
etherStatsUndersizePkts(62),
etherStatsOversizePkts(63),
etherStatsFragments(64),
etherStatsJabbers(65),
etherStatsCollisions(66),
etherStatsPkts64Octets(67),
etherStatsPkts65to127Octets(68),
etherStatsPkts128to255Octets(69),
etherStatsPkts256to511Octets(70),
etherStatsPkts512to1023Octets(71),
etherStatsPkts1024to1518Octets(72),
dot1dTpPortInFrames(73),
dot1dTpPortOutFrames(74),
dot1dTpPortInDiscards(75)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type(s) of sorting capabilities supported by the agent.
If the agent can perform sorting of interfaces according to the
values of ifInOctets, as defined in [RFC2863],
then the ifInOctets bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInUcastPkts, as defined in [RFC2863],
then the ifInUcastPkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInNUcastPkts, as defined in [RFC2863],
then the ifInNUcastPkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInDiscards, as defined in [RFC2863],
then the ifInDiscards bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInErrors, as defined in [RFC2863],
then the ifInErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInUnknownProtocols, as defined in [RFC2863],
then the ifInUnknownProtocols bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutOctets, as defined in [RFC2863],
then the ifOutOctets bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutUcastPackets, as defined in [RFC2863],
then the ifOutUcastPackets bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutNUcastPackets, as defined in [RFC2863],
then the ifOutNUcastPackets bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutDiscards, as defined in [RFC2863],
then the ifOutDiscards bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutErrors, as defined in [RFC2863],
then the ifOutErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInMulticastPkts, as defined in [RFC2863],
then the ifInMulticastPkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInBroadcastPkts, as defined in [RFC2863],
then the ifInBroadcastPkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutMulticastPkts, as defined in [RFC2863],
then the ifOutMulticastPkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutBroadcastPkts, as defined in [RFC2863],
then the ifOutBroadcastPkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInOctets, as defined in [RFC2863],
then the ifHCInOctets bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInMulticastPkts, as defined in [RFC2863],
then the ifHCInMulticastPkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInBroadcastPkts, as defined in [RFC2863],
then the ifHCInBroadcastPkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutOctets, as defined in [RFC2863],
then the ifHCOutOctets bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutUcastPkts, as defined in [RFC2863],
then the ifHCOutUcastPkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutMulticastPkts, as defined in [RFC2863],
then the ifHCOutMulticastPkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutBroadcastPkts, as defined in [RFC2863],
then the ifHCOutBroadcastPkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsAlignmentErrors, as defined in [RFC2665],
then the dot3StatsAlignmentErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsFCSErrors, as defined in [RFC2665],
then the dot3StatsFCSErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSingleCollisionFrames, as defined in
[RFC2665],then the dot3StatsSingleCollisionFrames bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSQETestErrors, as defined in [RFC2665],
then the dot3StatsSQETestErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsDeferredTransmissions, as defined in
[RFC2665], then the dot3StatsDeferredTransmissions bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsLateCollisions, as defined in [RFC2665],
then the dot3StatsLateCollisions bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsExcessiveCollisions, as defined in [RFC2665],
then the dot3StatsExcessiveCollisions bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsInternalMacTxErrors, as defined in
[RFC2665],then the dot3StatsInternalMacTxErrors bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsCarrierSenseErrors, as defined in [RFC2665],
then the dot3StatsCarrierSenseErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsFrameTooLongs, as defined in [RFC2665],
then the dot3StatsFrameTooLongs bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsInternalMacRxErrors, as defined in
[RFC2665], then the dot3StatsInternalMacRxErrors bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSymbolErrors, as defined in [RFC2665],
then the dot3StatsSymbolErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3InPauseFrames, as defined in [RFC2665],
then the dot3InPauseFrames bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3OutPauseFrames, as defined in [RFC2665],
then the dot3OutPauseFrames bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLineErrors, as defined in [RFC1748],
then the dot5StatsLineErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsBurstErrors, as defined in [RFC1748],
then the dot5StatsBurstErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsACErrors, as defined in [RFC1748],
then the dot5StatsACErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsAbortTransErrors, as defined in [RFC1748],
then the dot5StatsAbortTransErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsInternalErrors, as defined in [RFC1748],
then the dot5StatsInternalErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLostFrameErrors, as defined in [RFC1748],
then the dot5StatsLostFrameErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsReceiveCongestionErrors, as defined in
[RFC1748], then the dot5StatsReceiveCongestionErrors bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsFrameCopiedErrors, as defined in [RFC1748],
then the dot5StatsFrameCopiedErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsTokenErrors, as defined in [RFC1748],
then the dot5StatsTokenErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSoftErrors, as defined in [RFC1748],
then the dot5StatsSoftErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsHardErrors, as defined in [RFC1748],
then the dot5StatsHardErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSignalLoss, as defined in [RFC1748],
then the dot5StatsSignalLoss bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsTransmitBeacons, as defined in [RFC1748],
then the dot5StatsTransmitBeacons bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsRecoverys, as defined in [RFC1748],
then the dot5StatsRecoverys bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLobeWires, as defined in [RFC1748],
then the dot5StatsLobeWires bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsRemoves, as defined in [RFC1748],
then the dot5StatsRemoves bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSingles, as defined in [RFC1748],
then the dot5StatsSingles bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsFreqErrors, as defined in [RFC1748],
then the dot5StatsFreqErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsDropEvents, as defined in [RFC2819],
then the etherStatsDropEvents bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsOctets, as defined in [RFC2819],
then the etherStatsOctets bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts, as defined in [RFC2819],
then the etherStatsPkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsBroadcastPkts, as defined in [RFC2819],
then the etherStatsBroadcastPkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsMulticastPkts, as defined in [RFC2819],
then the etherStatsMulticastPkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsCRCAlignErrors, as defined in [RFC2819],
then the etherStatsCRCAlignErrors bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsUndersizePkts, as defined in [RFC2819],
then the etherStatsUndersizePkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsOversizePkts, as defined in [RFC2819],
then the etherStatsOversizePkts bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsFragments, as defined in [RFC2819],
then the etherStatsFragments bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsJabbers, as defined in [RFC2819],
then the etherStatsJabbers bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsCollisions, as defined in [RFC2819],
then the etherStatsCollisions bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts64Octets, as defined in [RFC2819],
then the etherStatsPkts64Octets bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts65to127Octets, as defined in [RFC2819],
then the etherStatsPkts65to127Octets bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts128to255Octets, as defined in [RFC2819],
then the etherStatsPkts128to255Octets bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts256to511Octets, as defined in [RFC2819],
then the etherStatsPkts256to511Octets bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts512to1023Octets, as defined in [RFC2819],
then the etherStatsPkts512to1023Octets bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts1024to1518Octets, as defined in
[RFC2819], then the etherStatsPkts1024to1518Octets bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortInFrames, as defined in [RFC1493],
then the dot1dTpPortInFrames bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortOutFrames, as defined in [RFC1493],
then the dot1dTpPortOutFrames bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortInDiscards, as defined in [RFC1493],
then the dot1dTpPortInDiscards bit will be set."
View at oid-info.com
The type(s) of sorting capabilities supported by the agent.
If the agent can perform sorting of interfaces according to the
values of ifInOctets, as defined in [RFC2863],
then the 'ifInOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInUcastPkts, as defined in [RFC2863],
then the 'ifInUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInNUcastPkts, as defined in [RFC2863],
then the 'ifInNUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInDiscards, as defined in [RFC2863],
then the 'ifInDiscards' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInErrors, as defined in [RFC2863],
then the 'ifInErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInUnknownProtocols, as defined in [RFC2863],
then the 'ifInUnknownProtocols' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutOctets, as defined in [RFC2863],
then the 'ifOutOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutUcastPackets, as defined in [RFC2863],
then the 'ifOutUcastPackets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutNUcastPackets, as defined in [RFC2863],
then the 'ifOutNUcastPackets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutDiscards, as defined in [RFC2863],
then the 'ifOutDiscards' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutErrors, as defined in [RFC2863],
then the 'ifOutErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInMulticastPkts, as defined in [RFC2863],
then the 'ifInMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInBroadcastPkts, as defined in [RFC2863],
then the 'ifInBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutMulticastPkts, as defined in [RFC2863],
then the 'ifOutMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutBroadcastPkts, as defined in [RFC2863],
then the 'ifOutBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInOctets, as defined in [RFC2863],
then the 'ifHCInOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInMulticastPkts, as defined in [RFC2863],
then the 'ifHCInMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInBroadcastPkts, as defined in [RFC2863],
then the 'ifHCInBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutOctets, as defined in [RFC2863],
then the 'ifHCOutOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutUcastPkts, as defined in [RFC2863],
then the 'ifHCOutUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutMulticastPkts, as defined in [RFC2863],
then the 'ifHCOutMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutBroadcastPkts, as defined in [RFC2863],
then the 'ifHCOutBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsAlignmentErrors, as defined in [RFC2665],
then the 'dot3StatsAlignmentErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsFCSErrors, as defined in [RFC2665],
then the 'dot3StatsFCSErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSingleCollisionFrames, as defined in
[RFC2665],then the 'dot3StatsSingleCollisionFrames' bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSQETestErrors, as defined in [RFC2665],
then the 'dot3StatsSQETestErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsDeferredTransmissions, as defined in
[RFC2665], then the 'dot3StatsDeferredTransmissions' bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsLateCollisions, as defined in [RFC2665],
then the 'dot3StatsLateCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsExcessiveCollisions, as defined in [RFC2665],
then the 'dot3StatsExcessiveCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsInternalMacTxErrors, as defined in
[RFC2665],then the 'dot3StatsInternalMacTxErrors' bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsCarrierSenseErrors, as defined in [RFC2665],
then the 'dot3StatsCarrierSenseErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsFrameTooLongs, as defined in [RFC2665],
then the 'dot3StatsFrameTooLongs' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsInternalMacRxErrors, as defined in
[RFC2665], then the 'dot3StatsInternalMacRxErrors' bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSymbolErrors, as defined in [RFC2665],
then the 'dot3StatsSymbolErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3InPauseFrames, as defined in [RFC2665],
then the 'dot3InPauseFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3OutPauseFrames, as defined in [RFC2665],
then the 'dot3OutPauseFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLineErrors, as defined in [RFC1748],
then the 'dot5StatsLineErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsBurstErrors, as defined in [RFC1748],
then the 'dot5StatsBurstErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsACErrors, as defined in [RFC1748],
then the 'dot5StatsACErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsAbortTransErrors, as defined in [RFC1748],
then the 'dot5StatsAbortTransErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsInternalErrors, as defined in [RFC1748],
then the 'dot5StatsInternalErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLostFrameErrors, as defined in [RFC1748],
then the 'dot5StatsLostFrameErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsReceiveCongestionErrors, as defined in
[RFC1748], then the 'dot5StatsReceiveCongestionErrors' bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsFrameCopiedErrors, as defined in [RFC1748],
then the 'dot5StatsFrameCopiedErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsTokenErrors, as defined in [RFC1748],
then the 'dot5StatsTokenErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSoftErrors, as defined in [RFC1748],
then the 'dot5StatsSoftErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsHardErrors, as defined in [RFC1748],
then the 'dot5StatsHardErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSignalLoss, as defined in [RFC1748],
then the 'dot5StatsSignalLoss' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsTransmitBeacons, as defined in [RFC1748],
then the 'dot5StatsTransmitBeacons' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsRecoverys, as defined in [RFC1748],
then the 'dot5StatsRecoverys' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLobeWires, as defined in [RFC1748],
then the 'dot5StatsLobeWires' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsRemoves, as defined in [RFC1748],
then the 'dot5StatsRemoves' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSingles, as defined in [RFC1748],
then the 'dot5StatsSingles' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsFreqErrors, as defined in [RFC1748],
then the 'dot5StatsFreqErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsDropEvents, as defined in [RFC2819],
then the 'etherStatsDropEvents' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsOctets, as defined in [RFC2819],
then the 'etherStatsOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts, as defined in [RFC2819],
then the 'etherStatsPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsBroadcastPkts, as defined in [RFC2819],
then the 'etherStatsBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsMulticastPkts, as defined in [RFC2819],
then the 'etherStatsMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsCRCAlignErrors, as defined in [RFC2819],
then the 'etherStatsCRCAlignErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsUndersizePkts, as defined in [RFC2819],
then the 'etherStatsUndersizePkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsOversizePkts, as defined in [RFC2819],
then the 'etherStatsOversizePkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsFragments, as defined in [RFC2819],
then the 'etherStatsFragments' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsJabbers, as defined in [RFC2819],
then the 'etherStatsJabbers' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsCollisions, as defined in [RFC2819],
then the 'etherStatsCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts64Octets, as defined in [RFC2819],
then the 'etherStatsPkts64Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts65to127Octets, as defined in [RFC2819],
then the 'etherStatsPkts65to127Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts128to255Octets, as defined in [RFC2819],
then the 'etherStatsPkts128to255Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts256to511Octets, as defined in [RFC2819],
then the 'etherStatsPkts256to511Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts512to1023Octets, as defined in [RFC2819],
then the 'etherStatsPkts512to1023Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts1024to1518Octets, as defined in
[RFC2819], then the 'etherStatsPkts1024to1518Octets' bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortInFrames, as defined in [RFC1493],
then the 'dot1dTpPortInFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortOutFrames, as defined in [RFC1493],
then the 'dot1dTpPortOutFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortInDiscards, as defined in [RFC1493],
then the 'dot1dTpPortInDiscards' bit will be set.
Parsed from file rfc3144-RMON-Extensions-for-Interface-Parameters-Monitoring.mib.txt
Company: None
Module: INTERFACETOPN-MIB
The type(s) of sorting capabilities supported by the agent.
If the agent can perform sorting of interfaces according to the
values of ifInOctets, as defined in [RFC2863],
then the 'ifInOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInUcastPkts, as defined in [RFC2863],
then the 'ifInUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInNUcastPkts, as defined in [RFC2863],
then the 'ifInNUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInDiscards, as defined in [RFC2863],
then the 'ifInDiscards' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInErrors, as defined in [RFC2863],
then the 'ifInErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInUnknownProtocols, as defined in [RFC2863],
then the 'ifInUnknownProtocols' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutOctets, as defined in [RFC2863],
then the 'ifOutOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutUcastPackets, as defined in [RFC2863],
then the 'ifOutUcastPackets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutNUcastPackets, as defined in [RFC2863],
then the 'ifOutNUcastPackets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutDiscards, as defined in [RFC2863],
then the 'ifOutDiscards' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutErrors, as defined in [RFC2863],
then the 'ifOutErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInMulticastPkts, as defined in [RFC2863],
then the 'ifInMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInBroadcastPkts, as defined in [RFC2863],
then the 'ifInBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutMulticastPkts, as defined in [RFC2863],
then the 'ifOutMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutBroadcastPkts, as defined in [RFC2863],
then the 'ifOutBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInOctets, as defined in [RFC2863],
then the 'ifHCInOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInMulticastPkts, as defined in [RFC2863],
then the 'ifHCInMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInBroadcastPkts, as defined in [RFC2863],
then the 'ifHCInBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutOctets, as defined in [RFC2863],
then the 'ifHCOutOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutUcastPkts, as defined in [RFC2863],
then the 'ifHCOutUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutMulticastPkts, as defined in [RFC2863],
then the 'ifHCOutMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutBroadcastPkts, as defined in [RFC2863],
then the 'ifHCOutBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsAlignmentErrors, as defined in [RFC2665],
then the 'dot3StatsAlignmentErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsFCSErrors, as defined in [RFC2665],
then the 'dot3StatsFCSErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSingleCollisionFrames, as defined in
[RFC2665],then the 'dot3StatsSingleCollisionFrames' bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSQETestErrors, as defined in [RFC2665],
then the 'dot3StatsSQETestErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsDeferredTransmissions, as defined in
[RFC2665], then the 'dot3StatsDeferredTransmissions' bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsLateCollisions, as defined in [RFC2665],
then the 'dot3StatsLateCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsExcessiveCollisions, as defined in [RFC2665],
then the 'dot3StatsExcessiveCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsInternalMacTxErrors, as defined in
[RFC2665],then the 'dot3StatsInternalMacTxErrors' bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsCarrierSenseErrors, as defined in [RFC2665],
then the 'dot3StatsCarrierSenseErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsFrameTooLongs, as defined in [RFC2665],
then the 'dot3StatsFrameTooLongs' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsInternalMacRxErrors, as defined in
[RFC2665], then the 'dot3StatsInternalMacRxErrors' bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSymbolErrors, as defined in [RFC2665],
then the 'dot3StatsSymbolErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3InPauseFrames, as defined in [RFC2665],
then the 'dot3InPauseFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3OutPauseFrames, as defined in [RFC2665],
then the 'dot3OutPauseFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLineErrors, as defined in [RFC1748],
then the 'dot5StatsLineErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsBurstErrors, as defined in [RFC1748],
then the 'dot5StatsBurstErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsACErrors, as defined in [RFC1748],
then the 'dot5StatsACErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsAbortTransErrors, as defined in [RFC1748],
then the 'dot5StatsAbortTransErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsInternalErrors, as defined in [RFC1748],
then the 'dot5StatsInternalErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLostFrameErrors, as defined in [RFC1748],
then the 'dot5StatsLostFrameErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsReceiveCongestionErrors, as defined in
[RFC1748], then the 'dot5StatsReceiveCongestionErrors' bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsFrameCopiedErrors, as defined in [RFC1748],
then the 'dot5StatsFrameCopiedErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsTokenErrors, as defined in [RFC1748],
then the 'dot5StatsTokenErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSoftErrors, as defined in [RFC1748],
then the 'dot5StatsSoftErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsHardErrors, as defined in [RFC1748],
then the 'dot5StatsHardErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSignalLoss, as defined in [RFC1748],
then the 'dot5StatsSignalLoss' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsTransmitBeacons, as defined in [RFC1748],
then the 'dot5StatsTransmitBeacons' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsRecoverys, as defined in [RFC1748],
then the 'dot5StatsRecoverys' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLobeWires, as defined in [RFC1748],
then the 'dot5StatsLobeWires' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsRemoves, as defined in [RFC1748],
then the 'dot5StatsRemoves' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSingles, as defined in [RFC1748],
then the 'dot5StatsSingles' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsFreqErrors, as defined in [RFC1748],
then the 'dot5StatsFreqErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsDropEvents, as defined in [RFC2819],
then the 'etherStatsDropEvents' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsOctets, as defined in [RFC2819],
then the 'etherStatsOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts, as defined in [RFC2819],
then the 'etherStatsPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsBroadcastPkts, as defined in [RFC2819],
then the 'etherStatsBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsMulticastPkts, as defined in [RFC2819],
then the 'etherStatsMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsCRCAlignErrors, as defined in [RFC2819],
then the 'etherStatsCRCAlignErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsUndersizePkts, as defined in [RFC2819],
then the 'etherStatsUndersizePkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsOversizePkts, as defined in [RFC2819],
then the 'etherStatsOversizePkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsFragments, as defined in [RFC2819],
then the 'etherStatsFragments' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsJabbers, as defined in [RFC2819],
then the 'etherStatsJabbers' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsCollisions, as defined in [RFC2819],
then the 'etherStatsCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts64Octets, as defined in [RFC2819],
then the 'etherStatsPkts64Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts65to127Octets, as defined in [RFC2819],
then the 'etherStatsPkts65to127Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts128to255Octets, as defined in [RFC2819],
then the 'etherStatsPkts128to255Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts256to511Octets, as defined in [RFC2819],
then the 'etherStatsPkts256to511Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts512to1023Octets, as defined in [RFC2819],
then the 'etherStatsPkts512to1023Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts1024to1518Octets, as defined in
[RFC2819], then the 'etherStatsPkts1024to1518Octets' bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortInFrames, as defined in [RFC1493],
then the 'dot1dTpPortInFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortOutFrames, as defined in [RFC1493],
then the 'dot1dTpPortOutFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortInDiscards, as defined in [RFC1493],
then the 'dot1dTpPortInDiscards' bit will be set.
interfaceTopNCaps OBJECT-TYPE SYNTAX BITS { usrTopN(0), ifInOctets(1), ifInUcastPkts(2), ifInNUcastPkts(3), ifInDiscards(4), ifInErrors(5), ifInUnknownProtos(6), ifOutOctets(7), ifOutUcastPkts(8), ifOutNUcastPkts(9), ifOutDiscards(10), ifOutErrors(11), ifInMulticastPkts(12), ifInBroadcastPkts(13), ifOutMulticastPkts(14), ifOutBroadcastPkts(15), ifHCInOctets(16), ifHCInUcastPkts(17), ifHCInMulticastPkts(18), ifHCInBroadcastPkts(19), ifHCOutOctets(20), ifHCOutUcastPkts(21), ifHCOutMulticastPkts(22), ifHCOutBroadcastPkts(23), dot3StatsAlignmentErrors(24), dot3StatsFCSErrors(25), dot3StatsSingleCollisionFrames(26), dot3StatsMultipleCollisionFrames(27), dot3StatsSQETestErrors(28), dot3StatsDeferredTransmissions(29), dot3StatsLateCollisions(30), dot3StatsExcessiveCollisions(31), dot3StatsInternalMacTransmitErrors(32), dot3StatsCarrierSenseErrors(33), dot3StatsFrameTooLongs(34), dot3StatsInternalMacReceiveErrors(35), dot3StatsSymbolErrors(36), dot5StatsLineErrors(37), dot5StatsBurstErrors(38), dot5StatsACErrors(39), dot5StatsAbortTransErrors(40), dot5StatsInternalErrors(41), dot5StatsLostFrameErrors(42), dot5StatsReceiveCongestions(43), dot5StatsFrameCopiedErrors(44), dot5StatsTokenErrors(45), dot5StatsSoftErrors(46), dot5StatsHardErrors(47), dot5StatsSignalLoss(48), dot5StatsTransmitBeacons(49), dot5StatsRecoverys(50), dot5StatsLobeWires(51), dot5StatsRemoves(52), dot5StatsSingles(53), dot5StatsFreqErrors(54), etherStatsDropEvents(55), etherStatsOctets(56), etherStatsPkts(57), etherStatsBroadcastPkts(58), etherStatsMulticastPkts(59), etherStatsCRCAlignErrors(60), etherStatsUndersizePkts(61), etherStatsOversizePkts(62), etherStatsFragments(63), etherStatsJabbers(64), etherStatsCollisions(65), etherStatsPkts64Octets(66), etherStatsPkts65to127Octets(67), etherStatsPkts128to255Octets(68), etherStatsPkts256to511Octets(69), etherStatsPkts512to1023Octets(70), etherStatsPkts1024to1518Octets(71), dot1dTpPortInFrames(72), dot1dTpPortOutFrames(73), dot1dTpPortInDiscards(74) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type(s) of sorting capabilities supported by the agent. If the agent supports usrTopN functionality, then the 'usrTopN' bit will be set. A management application SHOULD NOT try to access the usrTopN functionality if this bit is not set. If the agent can perform sorting of interfaces according to the values of ifInOctets, as defined in [20], then the 'ifInOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInUcastPkts, as defined in [20], then the 'ifInUcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInNUcastPkts, as defined in [20], then the 'ifInNUcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInDiscards, as defined in [20], then the 'ifInDiscards' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInErrors, as defined in [20], then the 'ifInErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInUnknownProtocols, as defined in [20], then the 'ifInUnknownProtocols' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutOctets, as defined in [20], then the 'ifOutOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutUcastPackets, as defined in [20], then the 'ifOutUcastPackets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutNUcastPackets, as defined in [20], then the 'ifOutNUcastPackets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutDiscards, as defined in [20], then the 'ifOutDiscards' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutErrors, as defined in [20], then the 'ifOutErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInMulticastPkts, as defined in [20], then the 'ifInMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInBroadcastPkts, as defined in [20], then the 'ifInBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutMulticastPkts, as defined in [20], then the 'ifOutMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutBroadcastPkts, as defined in [20], then the 'ifOutBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCInOctes, as defined in [20], then the 'ifHCInOctes' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCInMulticastPkts, as defined in [20], then the 'ifHCInMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCInBroadcastPkts, as defined in [20], then the 'ifHCInBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutOctets, as defined in [20], then the 'ifHCOutOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutUcastPkts, as defined in [20], then the 'ifHCOutUcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutMulticastPkts, as defined in [20], then the 'ifHCOutMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutBroadcastPkts, as defined in [20], then the 'ifHCOutBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsAlignementErrors, as defined in [23], then the 'dot3StatsAlignementErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsFCSErrors, as defined in [23], then the 'dot3StatsFCSErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsSingleCollisionFrames, as defined in [23], then the 'dot3StatsSingleCollisionFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsSQETestErrors, as defined in [23], then the 'dot3StatsSQETestErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsDeferredTransmissions, as defined in [23], then the 'dot3StatsDeferredTransmissions' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsLateCollisions, as defined in [23], then the 'dot3StatsLateCollisions' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsExcessiveCollisions, as defined in [23], then the 'dot3StatsExcessiveCollisions' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsInternalMacTransmitErrors, as defined in [23], then the 'dot3StatsInternalMacTransmitErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsCarrierSenseErrors, as defined in [23], then the 'dot3StatsCarrierSenseErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsFrameTooLongs, as defined in [23], then the 'dot3StatsFrameTooLongs' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsInternalMacReceiveErrors, as defined in [23], then the 'dot3StatsInternalMacReceiveErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsSymbolErrors, as defined in [23], then the 'dot3StatsSymbolErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsLineErrors, as defined in [24], then the 'dot5StatsLineErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsBurstErrors, as defined in [24], then the 'dot5StatsBurstErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsACErrors, as defined in [24], then the 'dot5StatsACErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsAbortTransErrors, as defined in [24], then the 'dot5StatsAbortTransErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsInternalErrors, as defined in [24], then the 'dot5StatsInternalErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsLostFrameErrors, as defined in [24], then the 'dot5StatsLostFrameErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsReceiveCongestionErrors, as defined in [24], then the 'dot5StatsReceiveCongestionErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsFrameCopiedErrors, as defined in [24], then the 'dot5StatsFrameCopiedErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsTokenErrors, as defined in [24], then the 'dot5StatsTokenErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsSoftErrors, as defined in [24], then the 'dot5StatsSoftErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsHardErrors, as defined in [24], then the 'dot5StatsHardErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsSignalLoss, as defined in [24], then the 'dot5StatsSignalLoss' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsTransmitBeacons, as defined in [24], then the 'dot5StatsTransmitBeacons' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsRecoverys, as defined in [24], then the 'dot5StatsRecoverys' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsLobeWires, as defined in [24], then the 'dot5StatsLobeWires' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsRemoves, as defined in [24], then the 'dot5StatsRemoves' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsSingles, as defined in [24], then the 'dot5StatsSingles' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsFreqErrors, as defined in [24], then the 'dot5StatsFreqErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsDropEvents, as defined in [17], then the 'etherStatsDropEvents' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsOctets, as defined in [17], then the 'etherStatsOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts, as defined in [17], then the 'etherStatsPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsBroadcastPkts, as defined in [17], then the 'etherStatsBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsMulticastPkts, as defined in [17], then the 'etherStatsMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsCRCAlignErrors, as defined in [17], then the 'etherStatsCRCAlignErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsUndersizePkts, as defined in [17], then the 'etherStatsUndersizePkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsOversizePkts, as defined in [17], then the 'etherStatsOversizePkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsFragments, as defined in [17], then the 'etherStatsFragments' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsJabbers, as defined in [17], then the 'etherStatsJabbers' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsCollisions, as defined in [17], then the 'etherStatsCollisions' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts64Octets, as defined in [17], then the 'etherStatsPkts64Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts65to127Octets, as defined in [17], then the 'etherStatsPkts65to127Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts128to255Octets, as defined in [17], then the 'etherStatsPkts128to255Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts256to511Octets, as defined in [17], then the 'etherStatsPkts256to511Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts512to1023Octets, as defined in [17], then the 'etherStatsPkts512to1023Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts1024to1518Octets, as defined in [17], then the 'etherStatsPkts1024to1518Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of dot1dTpPortInFrames, as defined in [25], then the 'dot1dTpPortInFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot1dTpPortOutFrames, as defined in [25], then the 'dot1dTpPortOutFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot1dTpPortInDiscards, as defined in [25], then the 'dot1dTpPortInDiscards' bit will be set." ::= { interfaceTopNObjects 1 }
interfaceTopNCaps OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..10)) ACCESS read-only STATUS mandatory DESCRIPTION "The type(s) of sorting capabilities supported by the agent. If the agent can perform sorting of interfaces according to the values of ifInOctets, as defined in [RFC2863], then the 'ifInOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInUcastPkts, as defined in [RFC2863], then the 'ifInUcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInNUcastPkts, as defined in [RFC2863], then the 'ifInNUcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInDiscards, as defined in [RFC2863], then the 'ifInDiscards' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInErrors, as defined in [RFC2863], then the 'ifInErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInUnknownProtocols, as defined in [RFC2863], then the 'ifInUnknownProtocols' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutOctets, as defined in [RFC2863], then the 'ifOutOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutUcastPackets, as defined in [RFC2863], then the 'ifOutUcastPackets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutNUcastPackets, as defined in [RFC2863], then the 'ifOutNUcastPackets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutDiscards, as defined in [RFC2863], then the 'ifOutDiscards' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutErrors, as defined in [RFC2863], then the 'ifOutErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInMulticastPkts, as defined in [RFC2863], then the 'ifInMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInBroadcastPkts, as defined in [RFC2863], then the 'ifInBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutMulticastPkts, as defined in [RFC2863], then the 'ifOutMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutBroadcastPkts, as defined in [RFC2863], then the 'ifOutBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCInOctets, as defined in [RFC2863], then the 'ifHCInOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCInMulticastPkts, as defined in [RFC2863], then the 'ifHCInMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCInBroadcastPkts, as defined in [RFC2863], then the 'ifHCInBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutOctets, as defined in [RFC2863], then the 'ifHCOutOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutUcastPkts, as defined in [RFC2863], then the 'ifHCOutUcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutMulticastPkts, as defined in [RFC2863], then the 'ifHCOutMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutBroadcastPkts, as defined in [RFC2863], then the 'ifHCOutBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsAlignmentErrors, as defined in [RFC2665], then the 'dot3StatsAlignmentErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsFCSErrors, as defined in [RFC2665], then the 'dot3StatsFCSErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsSingleCollisionFrames, as defined in [RFC2665],then the 'dot3StatsSingleCollisionFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsSQETestErrors, as defined in [RFC2665], then the 'dot3StatsSQETestErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsDeferredTransmissions, as defined in [RFC2665], then the 'dot3StatsDeferredTransmissions' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsLateCollisions, as defined in [RFC2665], then the 'dot3StatsLateCollisions' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsExcessiveCollisions, as defined in [RFC2665], then the 'dot3StatsExcessiveCollisions' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsInternalMacTxErrors, as defined in [RFC2665],then the 'dot3StatsInternalMacTxErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsCarrierSenseErrors, as defined in [RFC2665], then the 'dot3StatsCarrierSenseErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsFrameTooLongs, as defined in [RFC2665], then the 'dot3StatsFrameTooLongs' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsInternalMacRxErrors, as defined in [RFC2665], then the 'dot3StatsInternalMacRxErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsSymbolErrors, as defined in [RFC2665], then the 'dot3StatsSymbolErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3InPauseFrames, as defined in [RFC2665], then the 'dot3InPauseFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3OutPauseFrames, as defined in [RFC2665], then the 'dot3OutPauseFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsLineErrors, as defined in [RFC1748], then the 'dot5StatsLineErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsBurstErrors, as defined in [RFC1748], then the 'dot5StatsBurstErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsACErrors, as defined in [RFC1748], then the 'dot5StatsACErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsAbortTransErrors, as defined in [RFC1748], then the 'dot5StatsAbortTransErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsInternalErrors, as defined in [RFC1748], then the 'dot5StatsInternalErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsLostFrameErrors, as defined in [RFC1748], then the 'dot5StatsLostFrameErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsReceiveCongestionErrors, as defined in [RFC1748], then the 'dot5StatsReceiveCongestionErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsFrameCopiedErrors, as defined in [RFC1748], then the 'dot5StatsFrameCopiedErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsTokenErrors, as defined in [RFC1748], then the 'dot5StatsTokenErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsSoftErrors, as defined in [RFC1748], then the 'dot5StatsSoftErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsHardErrors, as defined in [RFC1748], then the 'dot5StatsHardErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsSignalLoss, as defined in [RFC1748], then the 'dot5StatsSignalLoss' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsTransmitBeacons, as defined in [RFC1748], then the 'dot5StatsTransmitBeacons' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsRecoverys, as defined in [RFC1748], then the 'dot5StatsRecoverys' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsLobeWires, as defined in [RFC1748], then the 'dot5StatsLobeWires' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsRemoves, as defined in [RFC1748], then the 'dot5StatsRemoves' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsSingles, as defined in [RFC1748], then the 'dot5StatsSingles' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsFreqErrors, as defined in [RFC1748], then the 'dot5StatsFreqErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsDropEvents, as defined in [RFC2819], then the 'etherStatsDropEvents' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsOctets, as defined in [RFC2819], then the 'etherStatsOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts, as defined in [RFC2819], then the 'etherStatsPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsBroadcastPkts, as defined in [RFC2819], then the 'etherStatsBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsMulticastPkts, as defined in [RFC2819], then the 'etherStatsMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsCRCAlignErrors, as defined in [RFC2819], then the 'etherStatsCRCAlignErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsUndersizePkts, as defined in [RFC2819], then the 'etherStatsUndersizePkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsOversizePkts, as defined in [RFC2819], then the 'etherStatsOversizePkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsFragments, as defined in [RFC2819], then the 'etherStatsFragments' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsJabbers, as defined in [RFC2819], then the 'etherStatsJabbers' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsCollisions, as defined in [RFC2819], then the 'etherStatsCollisions' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts64Octets, as defined in [RFC2819], then the 'etherStatsPkts64Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts65to127Octets, as defined in [RFC2819], then the 'etherStatsPkts65to127Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts128to255Octets, as defined in [RFC2819], then the 'etherStatsPkts128to255Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts256to511Octets, as defined in [RFC2819], then the 'etherStatsPkts256to511Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts512to1023Octets, as defined in [RFC2819], then the 'etherStatsPkts512to1023Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts1024to1518Octets, as defined in [RFC2819], then the 'etherStatsPkts1024to1518Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of dot1dTpPortInFrames, as defined in [RFC1493], then the 'dot1dTpPortInFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot1dTpPortOutFrames, as defined in [RFC1493], then the 'dot1dTpPortOutFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot1dTpPortInDiscards, as defined in [RFC1493], then the 'dot1dTpPortInDiscards' bit will be set." ::= { interfaceTopNObjects 1 }
Automatically extracted from RFC3144
interfaceTopNCaps OBJECT-TYPE SYNTAX BITS { ifInOctets(0), ifInUcastPkts(1), ifInNUcastPkts(2), ifInDiscards(3), ifInErrors(4), ifInUnknownProtos(5), ifOutOctets(6), ifOutUcastPkts(7), ifOutNUcastPkts(8), ifOutDiscards(9), ifOutErrors(10), ifInMulticastPkts(11), ifInBroadcastPkts(12), ifOutMulticastPkts(13), ifOutBroadcastPkts(14), ifHCInOctets(15), ifHCInUcastPkts(16), ifHCInMulticastPkts(17), ifHCInBroadcastPkts(18), ifHCOutOctets(19), ifHCOutUcastPkts(20), ifHCOutMulticastPkts(21), ifHCOutBroadcastPkts(22), dot3StatsAlignmentErrors(23), dot3StatsFCSErrors(24), dot3StatsSingleCollisionFrames(25), dot3StatsMultipleCollisionFrames(26), dot3StatsSQETestErrors(27), dot3StatsDeferredTransmissions(28), dot3StatsLateCollisions(29), dot3StatsExcessiveCollisions(30), dot3StatsInternalMacTxErrors(31), dot3StatsCarrierSenseErrors(32), dot3StatsFrameTooLongs(33), dot3StatsInternalMacRxErrors(34), dot3StatsSymbolErrors(35), dot3InPauseFrames(36), dot3OutPauseFrames(37), dot5StatsLineErrors(38), dot5StatsBurstErrors(39), dot5StatsACErrors(40), dot5StatsAbortTransErrors(41), dot5StatsInternalErrors(42), dot5StatsLostFrameErrors(43), dot5StatsReceiveCongestions(44), dot5StatsFrameCopiedErrors(45), dot5StatsTokenErrors(46), dot5StatsSoftErrors(47), dot5StatsHardErrors(48), dot5StatsSignalLoss(49), dot5StatsTransmitBeacons(50), dot5StatsRecoverys(51), dot5StatsLobeWires(52), dot5StatsRemoves(53), dot5StatsSingles(54), dot5StatsFreqErrors(55), etherStatsDropEvents(56), etherStatsOctets(57), etherStatsPkts(58), etherStatsBroadcastPkts(59), etherStatsMulticastPkts(60), etherStatsCRCAlignErrors(61), etherStatsUndersizePkts(62), etherStatsOversizePkts(63), etherStatsFragments(64), etherStatsJabbers(65), etherStatsCollisions(66), etherStatsPkts64Octets(67), etherStatsPkts65to127Octets(68), etherStatsPkts128to255Octets(69), etherStatsPkts256to511Octets(70), etherStatsPkts512to1023Octets(71), etherStatsPkts1024to1518Octets(72), dot1dTpPortInFrames(73), dot1dTpPortOutFrames(74), dot1dTpPortInDiscards(75) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type(s) of sorting capabilities supported by the agent. If the agent can perform sorting of interfaces according to the values of ifInOctets, as defined in [RFC2863], then the 'ifInOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInUcastPkts, as defined in [RFC2863], then the 'ifInUcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInNUcastPkts, as defined in [RFC2863], then the 'ifInNUcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInDiscards, as defined in [RFC2863], then the 'ifInDiscards' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInErrors, as defined in [RFC2863], then the 'ifInErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInUnknownProtocols, as defined in [RFC2863], then the 'ifInUnknownProtocols' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutOctets, as defined in [RFC2863], then the 'ifOutOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutUcastPackets, as defined in [RFC2863], then the 'ifOutUcastPackets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutNUcastPackets, as defined in [RFC2863], then the 'ifOutNUcastPackets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutDiscards, as defined in [RFC2863], then the 'ifOutDiscards' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutErrors, as defined in [RFC2863], then the 'ifOutErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInMulticastPkts, as defined in [RFC2863], then the 'ifInMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInBroadcastPkts, as defined in [RFC2863], then the 'ifInBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutMulticastPkts, as defined in [RFC2863], then the 'ifOutMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutBroadcastPkts, as defined in [RFC2863], then the 'ifOutBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCInOctets, as defined in [RFC2863], then the 'ifHCInOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCInMulticastPkts, as defined in [RFC2863], then the 'ifHCInMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCInBroadcastPkts, as defined in [RFC2863], then the 'ifHCInBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutOctets, as defined in [RFC2863], then the 'ifHCOutOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutUcastPkts, as defined in [RFC2863], then the 'ifHCOutUcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutMulticastPkts, as defined in [RFC2863], then the 'ifHCOutMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutBroadcastPkts, as defined in [RFC2863], then the 'ifHCOutBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsAlignmentErrors, as defined in [RFC2665], then the 'dot3StatsAlignmentErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsFCSErrors, as defined in [RFC2665], then the 'dot3StatsFCSErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsSingleCollisionFrames, as defined in [RFC2665],then the 'dot3StatsSingleCollisionFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsSQETestErrors, as defined in [RFC2665], then the 'dot3StatsSQETestErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsDeferredTransmissions, as defined in [RFC2665], then the 'dot3StatsDeferredTransmissions' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsLateCollisions, as defined in [RFC2665], then the 'dot3StatsLateCollisions' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsExcessiveCollisions, as defined in [RFC2665], then the 'dot3StatsExcessiveCollisions' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsInternalMacTxErrors, as defined in [RFC2665],then the 'dot3StatsInternalMacTxErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsCarrierSenseErrors, as defined in [RFC2665], then the 'dot3StatsCarrierSenseErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsFrameTooLongs, as defined in [RFC2665], then the 'dot3StatsFrameTooLongs' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsInternalMacRxErrors, as defined in [RFC2665], then the 'dot3StatsInternalMacRxErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsSymbolErrors, as defined in [RFC2665], then the 'dot3StatsSymbolErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3InPauseFrames, as defined in [RFC2665], then the 'dot3InPauseFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3OutPauseFrames, as defined in [RFC2665], then the 'dot3OutPauseFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsLineErrors, as defined in [RFC1748], then the 'dot5StatsLineErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsBurstErrors, as defined in [RFC1748], then the 'dot5StatsBurstErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsACErrors, as defined in [RFC1748], then the 'dot5StatsACErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsAbortTransErrors, as defined in [RFC1748], then the 'dot5StatsAbortTransErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsInternalErrors, as defined in [RFC1748], then the 'dot5StatsInternalErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsLostFrameErrors, as defined in [RFC1748], then the 'dot5StatsLostFrameErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsReceiveCongestionErrors, as defined in [RFC1748], then the 'dot5StatsReceiveCongestionErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsFrameCopiedErrors, as defined in [RFC1748], then the 'dot5StatsFrameCopiedErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsTokenErrors, as defined in [RFC1748], then the 'dot5StatsTokenErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsSoftErrors, as defined in [RFC1748], then the 'dot5StatsSoftErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsHardErrors, as defined in [RFC1748], then the 'dot5StatsHardErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsSignalLoss, as defined in [RFC1748], then the 'dot5StatsSignalLoss' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsTransmitBeacons, as defined in [RFC1748], then the 'dot5StatsTransmitBeacons' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsRecoverys, as defined in [RFC1748], then the 'dot5StatsRecoverys' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsLobeWires, as defined in [RFC1748], then the 'dot5StatsLobeWires' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsRemoves, as defined in [RFC1748], then the 'dot5StatsRemoves' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsSingles, as defined in [RFC1748], then the 'dot5StatsSingles' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsFreqErrors, as defined in [RFC1748], then the 'dot5StatsFreqErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsDropEvents, as defined in [RFC2819], then the 'etherStatsDropEvents' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsOctets, as defined in [RFC2819], then the 'etherStatsOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts, as defined in [RFC2819], then the 'etherStatsPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsBroadcastPkts, as defined in [RFC2819], then the 'etherStatsBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsMulticastPkts, as defined in [RFC2819], then the 'etherStatsMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsCRCAlignErrors, as defined in [RFC2819], then the 'etherStatsCRCAlignErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsUndersizePkts, as defined in [RFC2819], then the 'etherStatsUndersizePkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsOversizePkts, as defined in [RFC2819], then the 'etherStatsOversizePkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsFragments, as defined in [RFC2819], then the 'etherStatsFragments' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsJabbers, as defined in [RFC2819], then the 'etherStatsJabbers' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsCollisions, as defined in [RFC2819], then the 'etherStatsCollisions' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts64Octets, as defined in [RFC2819], then the 'etherStatsPkts64Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts65to127Octets, as defined in [RFC2819], then the 'etherStatsPkts65to127Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts128to255Octets, as defined in [RFC2819], then the 'etherStatsPkts128to255Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts256to511Octets, as defined in [RFC2819], then the 'etherStatsPkts256to511Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts512to1023Octets, as defined in [RFC2819], then the 'etherStatsPkts512to1023Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts1024to1518Octets, as defined in [RFC2819], then the 'etherStatsPkts1024to1518Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of dot1dTpPortInFrames, as defined in [RFC1493], then the 'dot1dTpPortInFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot1dTpPortOutFrames, as defined in [RFC1493], then the 'dot1dTpPortOutFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot1dTpPortInDiscards, as defined in [RFC1493], then the 'dot1dTpPortInDiscards' bit will be set." ::= { interfaceTopNObjects 1 }
interfaceTopNCaps OBJECT-TYPE SYNTAX BITS { ifInOctets(0), ifInUcastPkts(1), ifInNUcastPkts(2), ifInDiscards(3), ifInErrors(4), ifInUnknownProtos(5), ifOutOctets(6), ifOutUcastPkts(7), ifOutNUcastPkts(8), ifOutDiscards(9), ifOutErrors(10), ifInMulticastPkts(11), ifInBroadcastPkts(12), ifOutMulticastPkts(13), ifOutBroadcastPkts(14), ifHCInOctets(15), ifHCInUcastPkts(16), ifHCInMulticastPkts(17), ifHCInBroadcastPkts(18), ifHCOutOctets(19), ifHCOutUcastPkts(20), ifHCOutMulticastPkts(21), ifHCOutBroadcastPkts(22), dot3StatsAlignmentErrors(23), dot3StatsFCSErrors(24), dot3StatsSingleCollisionFrames(25), dot3StatsMultipleCollisionFrames(26), dot3StatsSQETestErrors(27), dot3StatsDeferredTransmissions(28), dot3StatsLateCollisions(29), dot3StatsExcessiveCollisions(30), dot3StatsInternalMacTxErrors(31), dot3StatsCarrierSenseErrors(32), dot3StatsFrameTooLongs(33), dot3StatsInternalMacRxErrors(34), dot3StatsSymbolErrors(35), dot3InPauseFrames(36), dot3OutPauseFrames(37), dot5StatsLineErrors(38), dot5StatsBurstErrors(39), dot5StatsACErrors(40), dot5StatsAbortTransErrors(41), dot5StatsInternalErrors(42), dot5StatsLostFrameErrors(43), dot5StatsReceiveCongestions(44), dot5StatsFrameCopiedErrors(45), dot5StatsTokenErrors(46), dot5StatsSoftErrors(47), dot5StatsHardErrors(48), dot5StatsSignalLoss(49), dot5StatsTransmitBeacons(50), dot5StatsRecoverys(51), dot5StatsLobeWires(52), dot5StatsRemoves(53), dot5StatsSingles(54), dot5StatsFreqErrors(55), etherStatsDropEvents(56), etherStatsOctets(57), etherStatsPkts(58), etherStatsBroadcastPkts(59), etherStatsMulticastPkts(60), etherStatsCRCAlignErrors(61), etherStatsUndersizePkts(62), etherStatsOversizePkts(63), etherStatsFragments(64), etherStatsJabbers(65), etherStatsCollisions(66), etherStatsPkts64Octets(67), etherStatsPkts65to127Octets(68), etherStatsPkts128to255Octets(69), etherStatsPkts256to511Octets(70), etherStatsPkts512to1023Octets(71), etherStatsPkts1024to1518Octets(72), dot1dTpPortInFrames(73), dot1dTpPortOutFrames(74), dot1dTpPortInDiscards(75) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type(s) of sorting capabilities supported by the agent. If the agent can perform sorting of interfaces according to the values of ifInOctets, as defined in [RFC2863], then the 'ifInOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInUcastPkts, as defined in [RFC2863], then the 'ifInUcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInNUcastPkts, as defined in [RFC2863], then the 'ifInNUcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInDiscards, as defined in [RFC2863], then the 'ifInDiscards' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInErrors, as defined in [RFC2863], then the 'ifInErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInUnknownProtocols, as defined in [RFC2863], then the 'ifInUnknownProtocols' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutOctets, as defined in [RFC2863], then the 'ifOutOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutUcastPackets, as defined in [RFC2863], then the 'ifOutUcastPackets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutNUcastPackets, as defined in [RFC2863], then the 'ifOutNUcastPackets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutDiscards, as defined in [RFC2863], then the 'ifOutDiscards' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutErrors, as defined in [RFC2863], then the 'ifOutErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInMulticastPkts, as defined in [RFC2863], then the 'ifInMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifInBroadcastPkts, as defined in [RFC2863], then the 'ifInBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutMulticastPkts, as defined in [RFC2863], then the 'ifOutMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifOutBroadcastPkts, as defined in [RFC2863], then the 'ifOutBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCInOctets, as defined in [RFC2863], then the 'ifHCInOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCInMulticastPkts, as defined in [RFC2863], then the 'ifHCInMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCInBroadcastPkts, as defined in [RFC2863], then the 'ifHCInBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutOctets, as defined in [RFC2863], then the 'ifHCOutOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutUcastPkts, as defined in [RFC2863], then the 'ifHCOutUcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutMulticastPkts, as defined in [RFC2863], then the 'ifHCOutMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of ifHCOutBroadcastPkts, as defined in [RFC2863], then the 'ifHCOutBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsAlignmentErrors, as defined in [RFC2665], then the 'dot3StatsAlignmentErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsFCSErrors, as defined in [RFC2665], then the 'dot3StatsFCSErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsSingleCollisionFrames, as defined in [RFC2665],then the 'dot3StatsSingleCollisionFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsSQETestErrors, as defined in [RFC2665], then the 'dot3StatsSQETestErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsDeferredTransmissions, as defined in [RFC2665], then the 'dot3StatsDeferredTransmissions' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsLateCollisions, as defined in [RFC2665], then the 'dot3StatsLateCollisions' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsExcessiveCollisions, as defined in [RFC2665], then the 'dot3StatsExcessiveCollisions' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsInternalMacTxErrors, as defined in [RFC2665],then the 'dot3StatsInternalMacTxErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsCarrierSenseErrors, as defined in [RFC2665], then the 'dot3StatsCarrierSenseErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsFrameTooLongs, as defined in [RFC2665], then the 'dot3StatsFrameTooLongs' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsInternalMacRxErrors, as defined in [RFC2665], then the 'dot3StatsInternalMacRxErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3StatsSymbolErrors, as defined in [RFC2665], then the 'dot3StatsSymbolErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3InPauseFrames, as defined in [RFC2665], then the 'dot3InPauseFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot3OutPauseFrames, as defined in [RFC2665], then the 'dot3OutPauseFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsLineErrors, as defined in [RFC1748], then the 'dot5StatsLineErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsBurstErrors, as defined in [RFC1748], then the 'dot5StatsBurstErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsACErrors, as defined in [RFC1748], then the 'dot5StatsACErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsAbortTransErrors, as defined in [RFC1748], then the 'dot5StatsAbortTransErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsInternalErrors, as defined in [RFC1748], then the 'dot5StatsInternalErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsLostFrameErrors, as defined in [RFC1748], then the 'dot5StatsLostFrameErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsReceiveCongestionErrors, as defined in [RFC1748], then the 'dot5StatsReceiveCongestionErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsFrameCopiedErrors, as defined in [RFC1748], then the 'dot5StatsFrameCopiedErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsTokenErrors, as defined in [RFC1748], then the 'dot5StatsTokenErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsSoftErrors, as defined in [RFC1748], then the 'dot5StatsSoftErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsHardErrors, as defined in [RFC1748], then the 'dot5StatsHardErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsSignalLoss, as defined in [RFC1748], then the 'dot5StatsSignalLoss' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsTransmitBeacons, as defined in [RFC1748], then the 'dot5StatsTransmitBeacons' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsRecoverys, as defined in [RFC1748], then the 'dot5StatsRecoverys' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsLobeWires, as defined in [RFC1748], then the 'dot5StatsLobeWires' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsRemoves, as defined in [RFC1748], then the 'dot5StatsRemoves' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsSingles, as defined in [RFC1748], then the 'dot5StatsSingles' bit will be set. If the agent can perform sorting of interfaces according to the values of dot5StatsFreqErrors, as defined in [RFC1748], then the 'dot5StatsFreqErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsDropEvents, as defined in [RFC2819], then the 'etherStatsDropEvents' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsOctets, as defined in [RFC2819], then the 'etherStatsOctets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts, as defined in [RFC2819], then the 'etherStatsPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsBroadcastPkts, as defined in [RFC2819], then the 'etherStatsBroadcastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsMulticastPkts, as defined in [RFC2819], then the 'etherStatsMulticastPkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsCRCAlignErrors, as defined in [RFC2819], then the 'etherStatsCRCAlignErrors' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsUndersizePkts, as defined in [RFC2819], then the 'etherStatsUndersizePkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsOversizePkts, as defined in [RFC2819], then the 'etherStatsOversizePkts' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsFragments, as defined in [RFC2819], then the 'etherStatsFragments' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsJabbers, as defined in [RFC2819], then the 'etherStatsJabbers' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsCollisions, as defined in [RFC2819], then the 'etherStatsCollisions' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts64Octets, as defined in [RFC2819], then the 'etherStatsPkts64Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts65to127Octets, as defined in [RFC2819], then the 'etherStatsPkts65to127Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts128to255Octets, as defined in [RFC2819], then the 'etherStatsPkts128to255Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts256to511Octets, as defined in [RFC2819], then the 'etherStatsPkts256to511Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts512to1023Octets, as defined in [RFC2819], then the 'etherStatsPkts512to1023Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of etherStatsPkts1024to1518Octets, as defined in [RFC2819], then the 'etherStatsPkts1024to1518Octets' bit will be set. If the agent can perform sorting of interfaces according to the values of dot1dTpPortInFrames, as defined in [RFC1493], then the 'dot1dTpPortInFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot1dTpPortOutFrames, as defined in [RFC1493], then the 'dot1dTpPortOutFrames' bit will be set. If the agent can perform sorting of interfaces according to the values of dot1dTpPortInDiscards, as defined in [RFC1493], then the 'dot1dTpPortInDiscards' bit will be set." ::= { interfaceTopNObjects 1 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.16.27.1.1.0 | interfaceTopNCaps | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.16.27.1.2 | interfaceTopNControlTable | 1 | 14 | A table of control records for reports on the top `N' interfaces for the value or rate of a selected object. The number of entrie… |
| 1.3.6.1.2.1.16.27.1.3 | interfaceTopNTable | 1 | 5 | A table of reports for the top `N' ports based on setting of associated control table entries. The maximum number of entries depe… |