The inversion mask that is applied to the status
match process. Those relevant bits in the received
packet status that correspond to bits cleared in
this mask must all be equal to their corresponding
bits in the filterPktStatus object for the packet to
be accepted. In addition, at least one of those
relevant bits in the received packet status that
correspond to bits set in this mask must be
different to its corresponding bit in the
filterPktStatus object for the packet to be
accepted.
For the purposes of the matching algorithm, if the
associated filterPktStatus object or a packet status
is longer than this mask, this mask is conceptually
extended with '0' bits until it reaches the longer
of the lengths of the filterPktStatus object and the
packet status.
This object may not be modified if the associated
filterStatus object is equal to valid(1).
Parsed from file RMON-MIB.mib
Module: RMON-MIB
The inversion mask that is applied to the status match
process. Those relevant bits in the received packet status
that correspond to bits cleared in this mask must all be
equal to their corresponding bits in the filterPktStatus
object for the packet to be accepted. In addition, at least
one of those relevant bits in the received packet status
that correspond to bits set in this mask must be different
to its corresponding bit in the filterPktStatus object for
the packet to be accepted.
For the purposes of the matching algorithm, if the associated
filterPktStatus object or a packet status is longer than this
mask, this mask is conceptually extended with '0' bits until
it reaches the longer of the lengths of the filterPktStatus
object and the packet status.
This object may not be modified if the associated
filterStatus object is equal to valid(1).
filterPktStatusNotMask OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The inversion mask that is applied to the status
match process. Those relevant bits in the received
packet status that correspond to bits cleared in
this mask must all be equal to their corresponding
bits in the filterPktStatus object for the packet to
be accepted. In addition, at least one of those
relevant bits in the received packet status that
correspond to bits set in this mask must be
different to its corresponding bit in the
filterPktStatus object for the packet to be
accepted.
For the purposes of the matching algorithm, if the
associated filterPktStatus object or a packet status
is longer than this mask, this mask is conceptually
extended with '0' bits until it reaches the longer
of the lengths of the filterPktStatus object and the
packet status.
This object may not be modified if the associated
filterStatus object is equal to valid(1)."
View at oid-info.com
The inversion mask that is applied to the status match
process. Those relevant bits in the received packet
status that correspond to bits cleared in this mask
must all be equal to their corresponding bits in the
filterPktStatus object for the packet to be accepted.
In addition, at least one of those relevant bits in the
received packet status that correspond to bits set in
this mask must be different to its corresponding bit
in the filterPktStatus object for the packet to be
accepted.
For the purposes of the matching algorithm, if the
associated filterPktStatus object or a packet status
is longer than this mask, this mask is conceptually
extended with '0' bits until it reaches the longer of
the lengths of the filterPktStatus object and the
packet status.
This object may not be modified if the associated
filterStatus object is equal to valid(1).
Parsed from file rfc1271.mib.txt
Company: None
Module: RFC1271-MIB
The inversion mask that is applied to the status match
process. Those relevant bits in the received packet status
that correspond to bits cleared in this mask must all be
equal to their corresponding bits in the filterPktStatus
object for the packet to be accepted. In addition, at least
one of those relevant bits in the received packet status
that correspond to bits set in this mask must be different
to its corresponding bit in the filterPktStatus object for
the packet to be accepted.
For the purposes of the matching algorithm, if the associated
filterPktStatus object or a packet status is longer than this
mask, this mask is conceptually extended with '0' bits until
it reaches the longer of the lengths of the filterPktStatus
object and the packet status.
This object may not be modified if the associated
filterStatus object is equal to valid(1).
filterPktStatusNotMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The inversion mask that is applied to the status match process. Those relevant bits in the received packet status that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktStatus object for the packet to be accepted. In addition, at least one of those relevant bits in the received packet status that correspond to bits set in this mask must be different to its corresponding bit in the filterPktStatus object for the packet to be accepted. For the purposes of the matching algorithm, if the associated filterPktStatus object or a packet status is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the longer of the lengths of the filterPktStatus object and the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1)." ::= { filterEntry 9 }
filterPktStatusNotMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The inversion mask that is applied to the status match process. Those relevant bits in the received packet status that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktStatus object for the packet to be accepted. In addition, at least one of those relevant bits in the received packet status that correspond to bits set in this mask must be different to its corresponding bit in the filterPktStatus object for the packet to be accepted. For the purposes of the matching algorithm, if the associated filterPktStatus object or a packet status is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the longer of the lengths of the filterPktStatus object and the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1)." ::= { filterEntry 9 }
Automatically extracted from rfc1757
filterPktStatusNotMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The inversion mask that is applied to the status match process. Those relevant bits in the received packet status that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktStatus object for the packet to be accepted. In addition, at least one of those relevant bits in the received packet status that correspond to bits set in this mask must be different to its corresponding bit in the filterPktStatus object for the packet to be accepted. For the purposes of the matching algorithm, if the associated filterPktStatus object or a packet status is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the longer of the lengths of the filterPktStatus object and the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1)." ::= { filterEntry 9 }
filterPktStatusNotMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The inversion mask that is applied to the status match process. Those relevant bits in the received packet status that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktStatus object for the packet to be accepted. In addition, at least one of those relevant bits in the received packet status that correspond to bits set in this mask must be different to its corresponding bit in the filterPktStatus object for the packet to be accepted. For the purposes of the matching algorithm, if the associated filterPktStatus object or a packet status is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the longer of the lengths of the filterPktStatus object and the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1)." ::= { filterEntry 9 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.16.7.1.1.1 | filterIndex | 2 | 2 | An index that uniquely identifies an entry in the filter table. Each such entry defines one filter that is to be applied to ever… |
| 1.3.6.1.2.1.16.7.1.1.2 | filterChannelIndex | 0 | 0 | This object identifies the channel of which this filter is a part. The filters identified by a particular value of this object a… |
| 1.3.6.1.2.1.16.7.1.1.3 | filterPktDataOffset | 0 | 0 | The offset from the beginning of each packet where a match of packet data will be attempted. This offset is measured from the po… |
| 1.3.6.1.2.1.16.7.1.1.4 | filterPktData | 0 | 0 | The data that is to be matched with the input packet. For each packet received, this filter and the accompanying filterPktDataMas… |
| 1.3.6.1.2.1.16.7.1.1.5 | filterPktDataMask | 0 | 0 | The mask that is applied to the match process. After adjusting this mask for the offset, only those bits in the received packet t… |
| 1.3.6.1.2.1.16.7.1.1.6 | filterPktDataNotMask | 0 | 0 | The inversion mask that is applied to the match process. After adjusting this mask for the offset, those relevant bits in the re… |
| 1.3.6.1.2.1.16.7.1.1.7 | filterPktStatus | 0 | 0 | The status that is to be matched with the input packet. The only bits relevant to this match algorithm are those that have the c… |
| 1.3.6.1.2.1.16.7.1.1.8 | filterPktStatusMask | 0 | 0 | The mask that is applied to the status match process. Only those bits in the received packet that correspond to bits set in this … |
| 1.3.6.1.2.1.16.7.1.1.10 | filterOwner | 0 | 0 | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.2.1.16.7.1.1.11 | filterStatus | 0 | 0 | The status of this filter entry. |