This object controls the action of the filters
associated with this channel. If this object is equal
to acceptMatched(1), packets will be accepted to this
channel if they are accepted by both the packet data
and packet status matches of an associated filter. If
this object is equal to acceptFailed(2), packets will
be accepted to this channel only if they fail either
the packet data match or the packet status match of
each of the associated filters.
In particular, a channel with no associated filters
will match no packets if set to acceptMatched(1)
case and will match all packets in the
acceptFailed(2) case.
This object may not be modified if the associated
channelStatus object is equal to valid(1).
Parsed from file RMON-MIB.mib
Module: RMON-MIB
This object controls the action of the filters
associated with this channel. If this object is equal
to acceptMatched(1), packets will be accepted to this
channel if they are accepted by both the packet data and
packet status matches of an associated filter. If
this object is equal to acceptFailed(2), packets will
be accepted to this channel only if they fail either
the packet data match or the packet status match of
each of the associated filters.
In particular, a channel with no associated filters will
match no packets if set to acceptMatched(1) case and will
match all packets in the acceptFailed(2) case.
This object may not be modified if the associated
channelStatus object is equal to valid(1).
channelAcceptType OBJECT-TYPE
SYNTAX INTEGER {
acceptMatched(1),
acceptFailed(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object controls the action of the filters
associated with this channel. If this object is equal
to acceptMatched(1), packets will be accepted to this
channel if they are accepted by both the packet data
and packet status matches of an associated filter. If
this object is equal to acceptFailed(2), packets will
be accepted to this channel only if they fail either
the packet data match or the packet status match of
each of the associated filters.
In particular, a channel with no associated filters
will match no packets if set to acceptMatched(1)
case and will match all packets in the
acceptFailed(2) case.
This object may not be modified if the associated
channelStatus object is equal to valid(1)."
View at oid-info.com
This object controls the action of the filters
associated with this channel. If this object is equal
to acceptMatched(1), packets will be accepted to this
channel if they are accepted by both the packet data
and packet status matches of an associated filter. If
this object is equal to acceptFailed(2), packets will
be accepted to this channel only if they fail either
the packet data match or the packet status match of
each of the associated filters.
This object may not be modified if the associated
channelStatus object is equal to valid(1).
Parsed from file rfc1271.mib.txt
Company: None
Module: RFC1271-MIB
This object controls the action of the filters
associated with this channel. If this object is equal
to acceptMatched(1), packets will be accepted to this
channel if they are accepted by both the packet data and
packet status matches of an associated filter. If
this object is equal to acceptFailed(2), packets will
be accepted to this channel only if they fail either
the packet data match or the packet status match of
each of the associated filters.
In particular, a channel with no associated filters will
match no packets if set to acceptMatched(1) case and will
match all packets in the acceptFailed(2) case.
This object may not be modified if the associated
channelStatus object is equal to valid(1).
channelAcceptType OBJECT-TYPE SYNTAX INTEGER { acceptMatched(1), acceptFailed(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls the action of the filters associated with this channel. If this object is equal to acceptMatched(1), packets will be accepted to this channel if they are accepted by both the packet data and packet status matches of an associated filter. If this object is equal to acceptFailed(2), packets will be accepted to this channel only if they fail either the packet data match or the packet status match of each of the associated filters. In particular, a channel with no associated filters will match no packets if set to acceptMatched(1) case and will match all packets in the acceptFailed(2) case. This object may not be modified if the associated channelStatus object is equal to valid(1)." ::= { channelEntry 3 }
channelAcceptType OBJECT-TYPE SYNTAX INTEGER { acceptMatched(1), acceptFailed(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls the action of the filters associated with this channel. If this object is equal to acceptMatched(1), packets will be accepted to this channel if they are accepted by both the packet data and packet status matches of an associated filter. If this object is equal to acceptFailed(2), packets will be accepted to this channel only if they fail either the packet data match or the packet status match of each of the associated filters. In particular, a channel with no associated filters will match no packets if set to acceptMatched(1) case and will match all packets in the acceptFailed(2) case. This object may not be modified if the associated channelStatus object is equal to valid(1)." ::= { channelEntry 3 }
Automatically extracted from rfc1757
channelAcceptType OBJECT-TYPE SYNTAX INTEGER { acceptMatched(1), acceptFailed(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls the action of the filters associated with this channel. If this object is equal to acceptMatched(1), packets will be accepted to this channel if they are accepted by both the packet data and packet status matches of an associated filter. If this object is equal to acceptFailed(2), packets will be accepted to this channel only if they fail either the packet data match or the packet status match of each of the associated filters. This object may not be modified if the associated channelStatus object is equal to valid(1)." ::= { channelEntry 3 }
channelAcceptType OBJECT-TYPE SYNTAX INTEGER { acceptMatched(1), acceptFailed(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object controls the action of the filters associated with this channel. If this object is equal to acceptMatched(1), packets will be accepted to this channel if they are accepted by both the packet data and packet status matches of an associated filter. If this object is equal to acceptFailed(2), packets will be accepted to this channel only if they fail either the packet data match or the packet status match of each of the associated filters. In particular, a channel with no associated filters will match no packets if set to acceptMatched(1) case and will match all packets in the acceptFailed(2) case. This object may not be modified if the associated channelStatus object is equal to valid(1)." ::= { channelEntry 3 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.16.7.2.1.1 | channelIndex | 3 | 3 | An index that uniquely identifies an entry in the channel table. Each such entry defines one channel, a logical data and event st… |
| 1.3.6.1.2.1.16.7.2.1.2 | channelIfIndex | 0 | 0 | The value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filte… |
| 1.3.6.1.2.1.16.7.2.1.4 | channelDataControl | 0 | 0 | This object controls the flow of data through this channel. If this object is on(1), data, status and events flow through this ch… |
| 1.3.6.1.2.1.16.7.2.1.5 | channelTurnOnEventIndex | 0 | 0 | The value of this object identifies the event that is configured to turn the associated channelDataControl from off to on when th… |
| 1.3.6.1.2.1.16.7.2.1.6 | channelTurnOffEventIndex | 0 | 0 | The value of this object identifies the event that is configured to turn the associated channelDataControl from on to off when th… |
| 1.3.6.1.2.1.16.7.2.1.7 | channelEventIndex | 0 | 0 | The value of this object identifies the event that is configured to be generated when the associated channelDataControl is on and… |
| 1.3.6.1.2.1.16.7.2.1.8 | channelEventStatus | 0 | 0 | The event status of this channel. If this channel is configured to generate events when packets are matched, a means of controlli… |
| 1.3.6.1.2.1.16.7.2.1.9 | channelMatches | 0 | 0 | The number of times this channel has matched a packet. Note that this object is updated even when channelDataControl is set to of… |
| 1.3.6.1.2.1.16.7.2.1.10 | channelDescription | 0 | 0 | A comment describing this channel. |
| 1.3.6.1.2.1.16.7.2.1.11 | channelOwner | 0 | 0 | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.2.1.16.7.2.1.12 | channelStatus | 0 | 0 | The status of this channel entry. |