pktcSigDevCidDtmfStartCode OBJECT-TYPE
SYNTAX DtmfCode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies optional start codes used when
the MIB object pktcSigDevCidSigProtocol is set
to a value of \dtmf(2)\.
Different countries define different caller id signaling
codes to support caller identification. When Dual-Tone
Multi-Frequency (DTMF) is used, the caller id digits are
preceded by a \start code\ digit, followed by the digit
transmission sequence <S1>...<Sn> (where Sx represents
the digits 0-9), and terminated by the \end code\ digit.
For example,
<A><S1>...<Sn> <D><S1>...<Sn> <B><S1>...<Sn> <C>.
The start code for calling number delivery may be DTMF
\A\ or \D\. The start code for redirecting a number may be
DTMF \D\. The DTMF code \B\ may be sent by the network
as a start code for the transfer of information values,
through which special events can be indicated to the
user. In some countries, the \*\ or \#\ may be used
instead of \A\, \B\, \C\, or \D\.
The value of this MIB object MUST NOT persist across MTA
Beacham, et al. Standards Track [Page 44]
reboots."
REFERENCE
"ETSI-EN-300-659-1 specification"
DEFVAL {dtmfcodeA}
View at oid-info.com
This object identifies optional start codes used when
the MIB object pktcSigDevCidSigProtocol is set
to a value of 'dtmf(2)'.
Different countries define different caller id signaling
codes to support caller identification. When Dual-Tone
Multi-Frequency (DTMF) is used, the caller id digits are
preceded by a 'start code' digit, followed by the digit
transmission sequence
the digits 0-9), and terminated by the 'end code' digit.
For example,
The start code for calling number delivery may be DTMF
'A' or 'D'. The start code for redirecting a number may be
DTMF 'D'. The DTMF code 'B' may be sent by the network
as a start code for the transfer of information values,
through which special events can be indicated to the
user. In some countries, the '*' or '#' may be used
instead of 'A', 'B', 'C', or 'D'.
The value of this MIB object MUST NOT persist across MTA
reboots.
Parsed from file rfc5098-PacketCable__IPCablecom-NCS-Signaling.mib.txt
Company: None
Module: PKTC-IETF-SIG-MIB
This object identifies optional start codes used when
the MIB object pktcSigDevCidSigProtocol is set
to a value of 'dtmf(2)'.
Different countries define different caller id signaling
codes to support caller identification. When Dual-Tone
Multi-Frequency (DTMF) is used, the caller id digits are
preceded by a 'start code' digit, followed by the digit
transmission sequence
the digits 0-9), and terminated by the 'end code' digit.
For example,
The start code for calling number delivery may be DTMF
'A' or 'D'. The start code for redirecting a number may be
DTMF 'D'. The DTMF code 'B' may be sent by the network
as a start code for the transfer of information values,
through which special events can be indicated to the
user. In some countries, the '*' or '#' may be used
instead of 'A', 'B', 'C', or 'D'.
The value of this MIB object MUST NOT persist across MTA
reboots.
Parsed from file PKTC-IETF-SIG-MIB.mib
Module: PKTC-IETF-SIG-MIB
Automatically extracted from RFC5098
pktcSigDevCidDtmfStartCode OBJECT-TYPE SYNTAX DtmfCode MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies optional start codes used when the MIB object pktcSigDevCidSigProtocol is set to a value of 'dtmf(2)'. Different countries define different caller id signaling codes to support caller identification. When Dual-Tone Multi-Frequency (DTMF) is used, the caller id digits are preceded by a 'start code' digit, followed by the digit transmission sequence
... (where Sx represents the digits 0-9), and terminated by the 'end code' digit. For example, ... ... ... . The start code for calling number delivery may be DTMF 'A' or 'D'. The start code for redirecting a number may be DTMF 'D'. The DTMF code 'B' may be sent by the network as a start code for the transfer of information values, through which special events can be indicated to the user. In some countries, the '*' or '#' may be used instead of 'A', 'B', 'C', or 'D'. The value of this MIB object MUST NOT persist across MTA reboots." REFERENCE "ETSI-EN-300-659-1 specification" DEFVAL {dtmfcodeA} ::= { pktcSigDevObjects 35 }
pktcSigDevCidDtmfStartCode OBJECT-TYPE SYNTAX DtmfCode MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies optional start codes used when the MIB object pktcSigDevCidSigProtocol is set to a value of 'dtmf(2)'. Different countries define different caller id signaling codes to support caller identification. When Dual-Tone Multi-Frequency (DTMF) is used, the caller id digits are preceded by a 'start code' digit, followed by the digit transmission sequence
... (where Sx represents the digits 0-9), and terminated by the 'end code' digit. For example, ... ... ... . The start code for calling number delivery may be DTMF 'A' or 'D'. The start code for redirecting a number may be DTMF 'D'. The DTMF code 'B' may be sent by the network as a start code for the transfer of information values, through which special events can be indicated to the user. In some countries, the '*' or '#' may be used instead of 'A', 'B', 'C', or 'D'. The value of this MIB object MUST NOT persist across MTA reboots." REFERENCE "ETSI-EN-300-659-1 specification" DEFVAL {dtmfcodeA} ::= { pktcSigDevObjects 35 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.169.1.1.35.0 | pktcSigDevCidDtmfStartCode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.169.1.1.1 | pktcSigDevCodecTable | 1 | 4 | pktcSigDevCodecTable OBJECT-TYPE SYNTAX SEQUENCE OF PktcSigDevCodecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "… |
| 1.3.6.1.2.1.169.1.1.2 | pktcSigDevEchoCancellation | 1 | 1 | This object specifies if the device is capable of echo cancellation. The MTA MUST set this MIB object to a value of true(1) if i… |
| 1.3.6.1.2.1.169.1.1.3 | pktcSigDevSilenceSuppression | 1 | 1 | This object specifies if the device is capable of silence suppression (as a result of Voice Activity Detection). The MTA MUST se… |
| 1.3.6.1.2.1.169.1.1.4 | pktcSigDevCidSigProtocol | 1 | 1 | This object is used to configure the subscriber-line protocol used for signaling on-hook caller id information. Different countri… |
| 1.3.6.1.2.1.169.1.1.5 | pktcSigDevR0Cadence | 1 | 1 | This object specifies ring cadence 0 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.6 | pktcSigDevR1Cadence | 1 | 1 | This object specifies ring cadence 1 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.7 | pktcSigDevR2Cadence | 1 | 1 | This object specifies ring cadence 2 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.8 | pktcSigDevR3Cadence | 1 | 1 | This object specifies ring cadence 3 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.9 | pktcSigDevR4Cadence | 1 | 1 | This object specifies ring cadence 4 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.10 | pktcSigDevR5Cadence | 1 | 1 | This object specifies ring cadence 5 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.11 | pktcSigDevR6Cadence | 1 | 1 | This object specifies ring cadence 6 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.12 | pktcSigDevR7Cadence | 1 | 1 | This object specifies ring cadence 7 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.13 | pktcSigDevRgCadence | 1 | 1 | This object specifies ring cadence rg (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.14 | pktcSigDevRsCadence | 1 | 1 | This object specifies ring cadence rs (a user-defined field). The MTA MUST reject any attempt to make this object repeatable. The… |
| 1.3.6.1.2.1.169.1.1.15 | pktcSigDefCallSigDscp | 1 | 1 | The default value used in the IP header for setting the Differentiated Services Code Point (DSCP) value for call signaling. The va… |
| 1.3.6.1.2.1.169.1.1.16 | pktcSigDefMediaStreamDscp | 1 | 1 | This object contains the default value used in the IP header for setting the Differentiated Services Code Point (DSCP) value for … |
| 1.3.6.1.2.1.169.1.1.17 | pktcSigCapabilityTable | 1 | 5 | This table describes the signaling types supported by this MTA. |
| 1.3.6.1.2.1.169.1.1.18 | pktcSigDefNcsReceiveUdpPort | 1 | 1 | This object contains the MTA User Datagram Protocol (UDP) receive port that is being used for NCS call signaling. This object sho… |
| 1.3.6.1.2.1.169.1.1.19 | pktcSigPowerRingFrequency | 1 | 1 | This object must only be provided via the configuration file during the provisioning process. The power ring frequency is the fr… |
| 1.3.6.1.2.1.169.1.1.20 | pktcSigPulseSignalTable | 1 | 7 | The Pulse signal table defines the pulse signal operation. There are nine types of international pulse signals, with each signal … |
| 1.3.6.1.2.1.169.1.1.21 | pktcSigDevCidMode | 1 | 1 | For on-hook caller id, pktcSigDevCidMode selects the method for representing and signaling caller identification. For the during… |
| 1.3.6.1.2.1.169.1.1.22 | pktcSigDevCidAfterRing | 1 | 1 | This object specifies the delay between the end of first ringing pattern and the start of the transmission of the FSK or DTMF con… |
| 1.3.6.1.2.1.169.1.1.23 | pktcSigDevCidAfterDTAS | 1 | 1 | This object specifies the delay between the end of the Dual Tone Alert Signal (DT-AS) and the start of the transmission of the FS… |
| 1.3.6.1.2.1.169.1.1.24 | pktcSigDevCidAfterRPAS | 1 | 1 | This object specifies the delay between the end of the Ring Pulse Alert Signal (RP-AS) and the start of the transmission of the F… |
| 1.3.6.1.2.1.169.1.1.25 | pktcSigDevRingAfterCID | 1 | 1 | This object specifies the delay between the end of the complete transmission of the FSK or DTMF containing the caller id informat… |
| 1.3.6.1.2.1.169.1.1.26 | pktcSigDevCidDTASAfterLR | 1 | 1 | This object specifies the delay between the end of the Line Reversal and the start of the Dual Tone Alert Signal (DT-AS). This o… |
| 1.3.6.1.2.1.169.1.1.27 | pktcSigDevVmwiMode | 1 | 1 | For visual message waiting indicator (VMWI), pktcSigDevVmwiMode selects the alerting signal method. For the dtAsETS, rpAsETS, lr… |
| 1.3.6.1.2.1.169.1.1.28 | pktcSigDevVmwiAfterDTAS | 1 | 1 | This object specifies the delay between the end of the Dual Tone Alert Signal (DT-AS) and the start of the transmission of the FS… |
| 1.3.6.1.2.1.169.1.1.29 | pktcSigDevVmwiAfterRPAS | 1 | 1 | This object specifies the delay between the end of the Ring Pulse Alert Signal (RP-AS) and the start of the transmission of the F… |
| 1.3.6.1.2.1.169.1.1.30 | pktcSigDevVmwiDTASAfterLR | 1 | 1 | This object specifies the delay between the end of the Line Reversal and the start of the Dual Tone Alert Signal (DT-AS) for VMWI… |
| 1.3.6.1.2.1.169.1.1.31 | pktcSigDevRingCadenceTable | 1 | 3 | Cadence rings are defined by the telco governing body for each country. The MTA must be able to support various ranges of cadenc… |
| 1.3.6.1.2.1.169.1.1.32 | pktcSigDevToneTable | 1 | 6 | The Tone Table defines the composition of tones and various tone operations. The definition of the tones callWaiting1 through call… |
| 1.3.6.1.2.1.169.1.1.33 | pktcSigDevMultiFreqToneTable | 1 | 12 | This MIB table defines the characteristics of tones with multiple frequencies. The constraints imposed on the tones by the MIB t… |
| 1.3.6.1.2.1.169.1.1.34 | pktcSigDevCidDelayAfterLR | 1 | 1 | This object specifies the delay between the end of the Line Reversal and the start of the FSK or DTMF signal. This MIB object is … |
| 1.3.6.1.2.1.169.1.1.36 | pktcSigDevCidDtmfEndCode | 1 | 1 | This object identifies optional end codes used when the pktcSigDevCidSigProtocol is set to a value of 'dtmf(2)'. Different countri… |
| 1.3.6.1.2.1.169.1.1.37 | pktcSigDevVmwiSigProtocol | 1 | 1 | This object identifies the subscriber line protocol used for signaling the information on Visual Message Waiting Indicator (VMWI)… |
| 1.3.6.1.2.1.169.1.1.38 | pktcSigDevVmwiDelayAfterLR | 1 | 1 | This object specifies the delay between the end of the Line Reversal and the start of the FSK or DTMF signal. This object is only… |
| 1.3.6.1.2.1.169.1.1.39 | pktcSigDevVmwiDtmfStartCode | 1 | 1 | This object identifies optional start codes used when the pktcSigDevVmwiSigProtocol is set to a value of 'dtmf(2)'. Different co… |
| 1.3.6.1.2.1.169.1.1.40 | pktcSigDevVmwiDtmfEndCode | 1 | 1 | This object identifies an optional end code used when the pktcSigDevVmwiSigProtocol is set to a value of 'dtmf(2)'. Different co… |
| 1.3.6.1.2.1.169.1.1.41 | pktcSigDevrpAsDtsDuration | 1 | 1 | This object specifies the duration of the rpASDTS ring pulse prior to the start of the transmission of the FSK or DTMF containing… |