phivRouteType OBJECT-TYPE
SYNTAX INTEGER {
routing-III (1),
nonrouting-III (2),
area (3),
routing-IV (4),
nonrouting-IV (5)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This parameter indicates the type of the executor
node. The node-type is one of the following:
routing-III
nonrouting-III
routing-IV
ronrouting-IV
area
A routing node has full routing capability. A
nonrouting node contains a subset of the Routing
routing modules. The III and IV indicate the DNA
phase of the node. Nonrouting nodes can deliver
and receive packets to and from any node, but cannot
route packets from other nodes through to other nodes.
An area node routes between areas. Refer to the Routing
specification for details.
For adjacent nodes, this is a read-only parameter that
indicates the type of the reachable adjacent node.
NOTE: The ROUTING-III and NONROUTING-III values are
incremented by one compared to the standard DECnet
values in order to maintain compliance with RFC 1155)"
View at oid-info.com
This parameter indicates the type of the executor
node. The node-type is one of the following:
routing-III
nonrouting-III
routing-IV
ronrouting-IV
area
A routing node has full routing capability. A
nonrouting node contains a subset of the Routing
routing modules. The III and IV indicate the DNA
phase of the node. Nonrouting nodes can deliver
and receive packets to and from any node, but cannot
route packets from other nodes through to other nodes.
An area node routes between areas. Refer to the Routing
specification for details.
For adjacent nodes, this is a read-only parameter that
indicates the type of the reachable adjacent node.
NOTE: The ROUTING-III and NONROUTING-III values are
incremented by one compared to the standard DECnet
values in order to maintain compliance with RFC 1155)
Parsed from file rfc1289.mib.txt
Company: None
Module: RFC1289-phivMIB
This parameter indicates the type of the executor
node. The node-type is one of the following:
routing-III
nonrouting-III
routing-IV
ronrouting-IV
area
A routing node has full routing capability. A
nonrouting node contains a subset of the Routing
routing modules. The III and IV indicate the DNA
phase of the node. Nonrouting nodes can deliver
and receive packets to and from any node, but cannot
route packets from other nodes through to other nodes.
An area node routes between areas. Refer to the Routing
specification for details.
For adjacent nodes, this is a read-only parameter that
indicates the type of the reachable adjacent node.
NOTE: The ROUTING-III and NONROUTING-III values are
incremented by one compared to the standard DECnet
values in order to maintain compliance with RFC 1155)
Parsed from file DECNET-PHIV-MIB.mib
Module: DECNET-PHIV-MIB
Automatically extracted from RFC1559
phivRouteType OBJECT-TYPE SYNTAX INTEGER { routing-III (1), nonrouting-III (2), area (3), routing-IV (4), nonrouting-IV (5) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter indicates the type of the executor node. The node-type is one of the following: routing-III nonrouting-III routing-IV ronrouting-IV area A routing node has full routing capability. A nonrouting node contains a subset of the Routing routing modules. The III and IV indicate the DNA phase of the node. Nonrouting nodes can deliver and receive packets to and from any node, but cannot route packets from other nodes through to other nodes. An area node routes between areas. Refer to the Routing specification for details. For adjacent nodes, this is a read-only parameter that indicates the type of the reachable adjacent node. NOTE: The ROUTING-III and NONROUTING-III values are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155)" ::= { routing 14 }
phivRouteType OBJECT-TYPE SYNTAX INTEGER { routing-III (1), nonrouting-III (2), area (3), routing-IV (4), nonrouting-IV (5) } ACCESS read-only STATUS obsolete DESCRIPTION "This parameter indicates the type of the executor node. The node-type is one of the following: routing-III nonrouting-III routing-IV ronrouting-IV area A routing node has full routing capability. A nonrouting node contains a subset of the Routing routing modules. The III and IV indicate the DNA phase of the node. Nonrouting nodes can deliver and receive packets to and from any node, but cannot route packets from other nodes through to other nodes. An area node routes between areas. Refer to the Routing specification for details. For adjacent nodes, this is a read-only parameter that indicates the type of the reachable adjacent node. NOTE: The ROUTING-III and NONROUTING-III values are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155)" ::= { routing 14 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.18.5.14.0 | phivRouteType | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.18.5.1 | phivRouteBroadcastRouteTimer | 1 | 1 | This value determines the maximum time in seconds allowed between Routing updates on Ethernet circuits. When this timer expired b… |
| 1.3.6.1.2.1.18.5.2 | phivRouteBuffSize | 1 | 1 | This parameter value determines the maximum size of a Routing message. It therefore determines the maximum size message that can … |
| 1.3.6.1.2.1.18.5.3 | phivRouteRoutingVers | 1 | 1 | This read-only parameter identifies the executor node's Routing version number. The format is version number, ECO, and user ECO,… |
| 1.3.6.1.2.1.18.5.4 | phivRouteMaxAddr | 1 | 1 | This value represents the largest node number and, therefore, number of nodes that can be known about by the executor node's home… |
| 1.3.6.1.2.1.18.5.5 | phivRouteMaxBdcastNonRouters | 1 | 1 | This value represents the maximum total number of nonrouters the executor node can have on its Ethernet circuits. |
| 1.3.6.1.2.1.18.5.6 | phivRouteMaxBdcastRouters | 1 | 1 | This value represents the maximum total number of routers the executor node can have on its Ethernet circuits. |
| 1.3.6.1.2.1.18.5.7 | phivRouteMaxBuffs | 1 | 1 | This value represents the maximum number of transmit buffers that Routing may use for all circuits. |
| 1.3.6.1.2.1.18.5.8 | phivRouteMaxCircuits | 1 | 1 | This value represents the maximum number of Routing circuits that the executor node can know about. |
| 1.3.6.1.2.1.18.5.9 | phivRouteMaxCost | 1 | 1 | This value represents the maximum total path cost allowed from the executor to any node within an area. The path cost is the sum … |
| 1.3.6.1.2.1.18.5.10 | phivRouteMaxHops | 1 | 1 | This value represents the maximum number of routing hops allowable from the executor to any other reachable node within an area. … |
| 1.3.6.1.2.1.18.5.11 | phivRouteMaxVisits | 1 | 1 | This value represents the maximum number of nodes a message coming into the executor node can have visited. If the message is not… |
| 1.3.6.1.2.1.18.5.12 | phivRouteRoutingTimer | 1 | 1 | This value determines the maximum time in seconds allowed between Routing updates on non-Ethernet circuits. When this timer expir… |
| 1.3.6.1.2.1.18.5.13 | phivRouteSegBuffSize | 1 | 1 | This parameter value determines the maximum size of an end-to-end segment. The size is a decimal integer in the range 1-65535. Th… |
| 1.3.6.1.2.1.18.5.15 | phivRouteCountAgedPktLoss | 1 | 1 | Number of aged packet losses. |
| 1.3.6.1.2.1.18.5.16 | phivRouteCountNodeUnrPktLoss | 1 | 1 | Number of node unreachable packet losses. |
| 1.3.6.1.2.1.18.5.17 | phivRouteCountOutRngePktLoss | 1 | 1 | Number of node out-of-range packet losses. |
| 1.3.6.1.2.1.18.5.18 | phivRouteCountOverSzePktLoss | 1 | 1 | Number of Oversized packet losses. |
| 1.3.6.1.2.1.18.5.19 | phivRouteCountPacketFmtErr | 1 | 1 | Number of packet format errors. |
| 1.3.6.1.2.1.18.5.20 | phivRouteCountPtlRteUpdtLoss | 1 | 1 | Number of partial routing update losses. |
| 1.3.6.1.2.1.18.5.21 | phivRouteCountVerifReject | 1 | 1 | Number of verification rejects. |
| 1.3.6.1.2.1.18.5.22 | phivLevel1RouteTable | 1 | 6 | Information about the currently known DECnet Phase IV Routes. |
| 1.3.6.1.2.1.18.5.23 | phivRouteCountZeroCount | 1 | 1 | When this value is set to 2, the following objects are set to Zero: phivRouteCountAgedPktLoss, phivRouteCountNodeUnrPktLoss, phivR… |
| 1.3.6.1.2.1.18.5.24 | phivRouteSystemAddr | 1 | 1 | DECnet Phase IV node address. |
| 1.3.6.1.2.1.18.5.25 | phivRouteRoutingType | 1 | 1 | This read-write parameter indicates the type of the executor node. The node-type is one of the following: routing-III nonrouting-I… |
| 1.3.6.1.2.1.18.5.26 | phivRouteSystemAddress | 1 | 1 | DECnet Phase IV node address. |