The number of outbound packets that could not be
transmitted because of errors.
Parsed from file MRVINREACH.mib
Module: MRVINREACH
For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.
Number of outbound packets that could not be transmitted because of errors.
View at oid-info.com
The number of outbound packets that could not be
transmitted because of errors.
Parsed from file msh100.mib.txt
Company: None
Module: LBMSH-MIB
For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.
ifOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound packets that could not be transmitted because of errors." ::= { ifEntry 20 }
ifOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { ifEntry 20 }
For more information see IETF - RFC 1213 (03/1991)
ifOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound packets that could not be transmitted because of errors." ::= { ifEntry 20 }
ifOutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { ifEntry 20 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.2.2.1.1 | ifIndex | 0 | 0 | Unique value for each interface |
| 1.3.6.1.2.1.2.2.1.2 | ifDescr | 0 | 0 | Textual string containing information about the interface. This string should include the name of the manufacturer, the product… |
| 1.3.6.1.2.1.2.2.1.3 | ifType | 276 | 276 | Type of interface, distinguished according to the physical/link protocol(s) immediately 'below' the network layer in the protoc… |
| 1.3.6.1.2.1.2.2.1.4 | ifMtu | 0 | 0 | Size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for… |
| 1.3.6.1.2.1.2.2.1.5 | ifSpeed | 0 | 0 | Estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those wh… |
| 1.3.6.1.2.1.2.2.1.6 | ifPhysAddress, ifPhyAddress | 0 | 0 | Interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do … |
| 1.3.6.1.2.1.2.2.1.7 | ifAdminStatus | 0 | 0 | Desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.2.1.2.2.1.8 | ifOperStatus | 0 | 0 | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.2.1.2.2.1.9 | ifLastChange | 0 | 0 | Value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to t… |
| 1.3.6.1.2.1.2.2.1.10 | ifInOctets | 0 | 0 | Total number of octets received on the interface, including framing characters. |
| 1.3.6.1.2.1.2.2.1.11 | ifInUcastPkts | 0 | 0 | Number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.12 | ifInNUcastPkts | 0 | 0 | Number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets livered to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.13 | ifInDiscards | 0 | 0 | Number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deli… |
| 1.3.6.1.2.1.2.2.1.14 | ifInErrors | 0 | 0 | Number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.15 | ifInUnknownProtos | 0 | 0 | Number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.2.1.2.2.1.16 | ifOutOctets | 0 | 0 | Total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.2.1.2.2.1.17 | ifOutUcastPkts | 0 | 0 | Total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those t… |
| 1.3.6.1.2.1.2.2.1.18 | ifOutNUcastPkts | 0 | 0 | Total number of packets that higher-level protocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast or … |
| 1.3.6.1.2.1.2.2.1.19 | ifOutDiscards | 0 | 0 | Number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being tra… |
| 1.3.6.1.2.1.2.2.1.21 | ifOutQLen | 0 | 0 | Length of the output packet queue (in packets). |
| 1.3.6.1.2.1.2.2.1.22 | ifSpecific | 0 | 0 | A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interfa… |
| 1.3.6.1.2.1.2.2.1.27 | ifStateChangeTrapEnable | 0 | 0 | None |
| 1.3.6.1.2.1.2.2.1.29 | ifClearStats | 0 | 0 | None |
| 1.3.6.1.2.1.2.2.1.30 | ifClearStatsTime | 0 | 0 | None |
| 1.3.6.1.2.1.2.2.1.31 | ifErrorRateTrapEnable | 0 | 0 | None |
| 1.3.6.1.2.1.2.2.1.32 | ifErrorRateInterval | 0 | 0 | None |
| 1.3.6.1.2.1.2.2.1.33 | ifErrorInLowThreshold | 0 | 0 | None |
| 1.3.6.1.2.1.2.2.1.34 | ifErrorInHighThreshold | 0 | 0 | ifErrorInHighthreshold |
| 1.3.6.1.2.1.2.2.1.35 | ifErrorOutLowThreshold | 0 | 0 | None |
| 1.3.6.1.2.1.2.2.1.36 | ifErrorOutHighThreshold | 0 | 0 | ifErrorOutHighthreshold |
| 1.3.6.1.2.1.2.2.1.37 | ifErrType | 0 | 0 | None |