Automatically extracted from RFC1628
upsWellKnownAlarms OBJECT IDENTIFIER ::= { upsAlarm 3 }
upsWellKnownAlarms OBJECT IDENTIFIER ::= { upsAlarm 3 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.33.1.6.3.1 | upsAlarmBatteryBad | 1 | 1 | One or more batteries have been determined to require replacement. |
| 1.3.6.1.2.1.33.1.6.3.2 | upsAlarmOnBattery | 1 | 1 | The UPS is drawing power from the batteries. |
| 1.3.6.1.2.1.33.1.6.3.3 | upsAlarmLowBattery | 1 | 1 | The remaining battery run-time is less than or equal to upsConfigLowBattTime. |
| 1.3.6.1.2.1.33.1.6.3.4 | upsAlarmDepletedBattery | 1 | 1 | The UPS will be unable to sustain the present load when and if the utility power is lost. |
| 1.3.6.1.2.1.33.1.6.3.5 | upsAlarmTempBad | 1 | 1 | A temperature is out of tolerance. |
| 1.3.6.1.2.1.33.1.6.3.6 | upsAlarmInputBad | 1 | 1 | An input condition is out of tolerance. |
| 1.3.6.1.2.1.33.1.6.3.7 | upsAlarmOutputBad | 1 | 1 | An output condition (other than OutputOverload) is out of tolerance. |
| 1.3.6.1.2.1.33.1.6.3.8 | upsAlarmOutputOverload | 1 | 1 | The output load exceeds the UPS output capacity. |
| 1.3.6.1.2.1.33.1.6.3.9 | upsAlarmOnBypass | 1 | 1 | The Bypass is presently engaged on the UPS. |
| 1.3.6.1.2.1.33.1.6.3.10 | upsAlarmBypassBad | 1 | 1 | The Bypass is out of tolerance. |
| 1.3.6.1.2.1.33.1.6.3.11 | upsAlarmOutputOffAsRequested | 1 | 1 | The UPS has shutdown as requested, i.e., the output is off. |
| 1.3.6.1.2.1.33.1.6.3.12 | upsAlarmUpsOffAsRequested | 1 | 1 | The entire UPS has shutdown as commanded. |
| 1.3.6.1.2.1.33.1.6.3.13 | upsAlarmChargerFailed | 1 | 1 | An uncorrected problem has been detected within the UPS charger subsystem. |
| 1.3.6.1.2.1.33.1.6.3.14 | upsAlarmUpsOutputOff | 1 | 1 | The output of the UPS is in the off state. |
| 1.3.6.1.2.1.33.1.6.3.15 | upsAlarmUpsSystemOff | 1 | 1 | The UPS system is in the off state. |
| 1.3.6.1.2.1.33.1.6.3.16 | upsAlarmFanFailure | 1 | 1 | The failure of one or more fans in the UPS has been detected. |
| 1.3.6.1.2.1.33.1.6.3.17 | upsAlarmFuseFailure | 1 | 1 | The failure of one or more fuses has been detected. |
| 1.3.6.1.2.1.33.1.6.3.18 | upsAlarmGeneralFault | 1 | 1 | A general fault in the UPS has been detected. |
| 1.3.6.1.2.1.33.1.6.3.19 | upsAlarmDiagnosticTestFailed | 1 | 1 | The result of the last diagnostic test indicates a failure. |
| 1.3.6.1.2.1.33.1.6.3.20 | upsAlarmCommunicationsLost | 1 | 1 | A problem has been encountered in the communications between the agent and the UPS. |
| 1.3.6.1.2.1.33.1.6.3.21 | upsAlarmAwaitingPower | 1 | 1 | The UPS output is off and the UPS is awaiting the return of input power. |
| 1.3.6.1.2.1.33.1.6.3.22 | upsAlarmShutdownPending | 1 | 1 | A upsShutdownAfterDelay countdown is underway. |
| 1.3.6.1.2.1.33.1.6.3.23 | upsAlarmShutdownImminent | 1 | 1 | The UPS will turn off power to the load in less than 5 seconds; this may be either a timed shutdown or a low battery shutdown. |
| 1.3.6.1.2.1.33.1.6.3.24 | upsAlarmTestInProgress | 1 | 1 | A test is in progress, as initiated and indicated by the Test Group. Tests initiated via other implementation-specific mechanism… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.33.1.6.1 | upsAlarmsPresent | 1 | 1 | The present number of active alarm conditions. |
| 1.3.6.1.2.1.33.1.6.2 | upsAlarmTable | 1 | 4 | A list of alarm table entries. The table contains zero, one, or many rows at any moment, depending upon the number of alarm cond… |
| 1.3.6.1.2.1.33.1.6.4 | upsAlarmID | 1 | 1 | A unique identifier for an alarm condition. This value must remain constant. |
| 1.3.6.1.2.1.33.1.6.5 | upsAlarmDESCR | 1 | 1 | A reference to an alarm description object. The object references should not be accessible, but rather be used to provide a uniq… |