Reference record for OID 1.3.6.1.2.1.37.1.1.12


parent
1.3.6.1.2.1.37.1.1 (atmTrafficDescriptorTypes)
node code
12
node name
atmNoClpNoScrCdvt
dot oid
1.3.6.1.2.1.37.1.1.12
type
OBJECT IDENTIFIER
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmTrafficDescriptorTypes(1) atmNoClpNoScrCdvt(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmTrafficDescriptorTypes(1) atmNoClpNoScrCdvt(12)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmTrafficDescriptorTypes(1) atmNoClpNoScrCdvt(12)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmTrafficDescriptorTypes(1) atmNoClpNoScrCdvt(12)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmTrafficDescriptorTypes(1) atmNoClpNoScrCdvt(12)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmTrafficDescriptorTypes(1) atmNoClpNoScrCdvt(12)}
  • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmTrafficDescriptorTypes/atmNoClpNoScrCdvt
  • /iso/identified-organization/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmTrafficDescriptorTypes/atmNoClpNoScrCdvt
  • /iso/org/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmTrafficDescriptorTypes/atmNoClpNoScrCdvt
  • /iso/org/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmTrafficDescriptorTypes/atmNoClpNoScrCdvt
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmTrafficDescriptorTypes/atmNoClpNoScrCdvt
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmTrafficDescriptorTypes/atmNoClpNoScrCdvt
  • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/37/1/1/12

    Description by circitor

    This traffic descriptor type is for no CLP
    and no Sustained Cell Rate. The use of the
    parameter vector for this type:
    Parameter 1: peak cell rate in cells/second
    for CLP=0+1 traffic
    Parameter 2: CDVT in tenths of microseconds
    Parameter 3: not used
    Parameter 4: not used
    Parameter 5: not used.

    This traffic descriptor type is applicable to
    CBR connections following the UNI 3.0/3.1
    conformance definition for PCR CLP=0+1.
    These CBR connections differ from CBR.1
    connections in that the CLR objective
    applies only to the CLP=0 cell flow.

    This traffic descriptor type is also
    applicable to connections following the UBR.1
    conformance definition.

    Parsed from file ATM-TC-MIB.mib
    Module: ATM-TC-MIB

    Description by oid_info

    atmNoClpNoScrCdvt OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
    "This traffic descriptor type is for no CLP
    and no Sustained Cell Rate. The use of the
    parameter vector for this type:
    Parameter 1: peak cell rate in cells/second
    for CLP=0+1 traffic
    Parameter 2: CDVT in tenths of microseconds
    Parameter 3: not used
    Parameter 4: not used
    Parameter 5: not used.
    This traffic descriptor type is applicable to
    CBR connections following the UNI 3.0/3.1
    conformance definition for PCR CLP=0+1.
    These CBR connections differ from CBR.1
    connections in that the CLR objective
    applies only to the CLP=0 cell flow.
    This traffic descriptor type is also
    applicable to connections following the UBR.1
    conformance definition."
    REFERENCE
    "ATM Forum,ATM User-Network Interface,
    Version 3.0 (UNI 3.0) Specification, 1994.
    ATM Forum, ATM User-Network Interface,
    Version 3.1 (UNI 3.1) Specification,
    November 1994.
    ATM Forum, Traffic Management Specification,
    Version 4.0, af-tm-0056.000, June 1996."

    View at oid-info.com

    Description by mibdepot

    This traffic descriptor type is for no CLP
    and no Sustained Cell Rate. The use of the
    parameter vector for this type:
    Parameter 1: peak cell rate in cells/second
    for CLP=0+1 traffic
    Parameter 2: CDVT in tenths of microseconds
    Parameter 3: not used
    Parameter 4: not used
    Parameter 5: not used.

    This traffic descriptor type is applicable to
    CBR connections following the UNI 3.0/3.1
    conformance definition for PCR CLP=0+1.
    These CBR connections differ from CBR.1
    connections in that the CLR objective
    applies only to the CLP=0 cell flow.

    This traffic descriptor type is also
    applicable to connections following the UBR.1
    conformance definition.

    Parsed from file ATM-TC-MIB.txt
    Company: None
    Module: ATM-TC-MIB

    Description by cisco

    This traffic descriptor type is for no CLP
    and no Sustained Cell Rate. The use of the
    parameter vector for this type:
    Parameter 1: peak cell rate in cells/second
    for CLP=0+1 traffic
    Parameter 2: CDVT in tenths of microseconds
    Parameter 3: not used
    Parameter 4: not used
    Parameter 5: not used.

    This traffic descriptor type is applicable to
    CBR connections following the UNI 3.0/3.1
    conformance definition for PCR CLP=0+1.
    These CBR connections differ from CBR.1
    connections in that the CLR objective
    applies only to the CLP=0 cell flow.

    This traffic descriptor type is also
    applicable to connections following the UBR.1
    conformance definition.

    Information by circitor

    atmNoClpNoScrCdvt OBJECT-IDENTITY STATUS current DESCRIPTION "This traffic descriptor type is for no CLP and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: CDVT in tenths of microseconds Parameter 3: not used Parameter 4: not used Parameter 5: not used. This traffic descriptor type is applicable to CBR connections following the UNI 3.0/3.1 conformance definition for PCR CLP=0+1. These CBR connections differ from CBR.1 connections in that the CLR objective applies only to the CLP=0 cell flow. This traffic descriptor type is also applicable to connections following the UBR.1 conformance definition." REFERENCE "ATM Forum,ATM User-Network Interface, Version 3.0 (UNI 3.0) Specification, 1994. ATM Forum, ATM User-Network Interface, Version 3.1 (UNI 3.1) Specification, November 1994. ATM Forum, Traffic Management Specification, Version 4.0, af-tm-0056.000, June 1996." ::= {atmTrafficDescriptorTypes 12}

    Information by cisco_v1

    atmNoClpNoScrCdvt OBJECT IDENTIFIER ::= { atmTrafficDescriptorTypes 12 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    atmNoClpNoScrCdvt OBJECT-IDENTITY STATUS current DESCRIPTION "This traffic descriptor type is for no CLP and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: CDVT in tenths of microseconds Parameter 3: not used Parameter 4: not used Parameter 5: not used. This traffic descriptor type is applicable to CBR connections following the UNI 3.0/3.1 conformance definition for PCR CLP=0+1. These CBR connections differ from CBR.1 connections in that the CLR objective applies only to the CLP=0 cell flow. This traffic descriptor type is also applicable to connections following the UBR.1 conformance definition." REFERENCE "ATM Forum,ATM User-Network Interface, Version 3.0 (UNI 3.0) Specification, 1994. ATM Forum, ATM User-Network Interface, Version 3.1 (UNI 3.1) Specification, November 1994. ATM Forum, Traffic Management Specification, Version 4.0, af-tm-0056.000, June 1996." ::= {atmTrafficDescriptorTypes 12}

    Information by cisco

    atmNoClpNoScrCdvt OBJECT-IDENTITY STATUS current DESCRIPTION "This traffic descriptor type is for no CLP and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: CDVT in tenths of microseconds Parameter 3: not used Parameter 4: not used Parameter 5: not used. This traffic descriptor type is applicable to CBR connections following the UNI 3.0/3.1 conformance definition for PCR CLP=0+1. These CBR connections differ from CBR.1 connections in that the CLR objective applies only to the CLP=0 cell flow. This traffic descriptor type is also applicable to connections following the UBR.1 conformance definition." REFERENCE "ATM Forum,ATM User-Network Interface, Version 3.0 (UNI 3.0) Specification, 1994. ATM Forum, ATM User-Network Interface, Version 3.1 (UNI 3.1) Specification, November 1994. ATM Forum, Traffic Management Specification, Version 4.0, af-tm-0056.000, June 1996." ::= {atmTrafficDescriptorTypes 12}

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (14)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.37.1.1.1 atmNoTrafficDescriptor 0 0 This identifies the no ATM traffic
    descriptor type. Parameters 1, 2, 3, 4,
    and 5 are not used. This traffic descriptor
    type can …
    1.3.6.1.2.1.37.1.1.2 atmNoClpNoScr 0 0 This traffic descriptor type is for no CLP
    and no Sustained Cell Rate. The use of the
    parameter vector for this type:
    Parameter 1…
    1.3.6.1.2.1.37.1.1.3 atmClpNoTaggingNoScr 0 0 This traffic descriptor is for CLP without
    tagging and no Sustained Cell Rate. The use
    of the parameter vector for this type:
    Par…
    1.3.6.1.2.1.37.1.1.4 atmClpTaggingNoScr 0 0 This traffic descriptor is for CLP with
    tagging and no Sustained Cell Rate. The use
    of the parameter vector for this type:
    Parame…
    1.3.6.1.2.1.37.1.1.5 atmNoClpScr 0 0 This traffic descriptor type is for no CLP
    with Sustained Cell Rate. The use of the
    parameter vector for this type:
    Parameter 1: …
    1.3.6.1.2.1.37.1.1.6 atmClpNoTaggingScr 0 0 This traffic descriptor type is for CLP with
    Sustained Cell Rate and no tagging. The use
    of the parameter vector for this type:
    P…
    1.3.6.1.2.1.37.1.1.7 atmClpTaggingScr 0 0 This traffic descriptor type is for CLP with
    tagging and Sustained Cell Rate. The use of
    the parameter vector for this type:
    Para…
    1.3.6.1.2.1.37.1.1.8 atmClpNoTaggingMcr 0 0 This traffic descriptor type is for CLP with
    Minimum Cell Rate and no tagging. The use of
    the parameter vector for this type:
    Par…
    1.3.6.1.2.1.37.1.1.9 atmClpTransparentNoScr 0 0 This traffic descriptor type is for the CLP-
    transparent model and no Sustained Cell Rate.
    The use of the parameter vector for th…
    1.3.6.1.2.1.37.1.1.10 atmClpTransparentScr 0 0 This traffic descriptor type is for the CLP-
    transparent model with Sustained Cell Rate.
    The use of the parameter vector for this…
    1.3.6.1.2.1.37.1.1.11 atmNoClpTaggingNoScr 0 0 This traffic descriptor type is for no CLP
    with tagging and no Sustained Cell Rate. The
    use of the parameter vector for this typ…
    1.3.6.1.2.1.37.1.1.13 atmNoClpScrCdvt 0 0 This traffic descriptor type is for no CLP
    with Sustained Cell Rate. The use of the
    parameter vector for this type:
    Parameter 1: …
    1.3.6.1.2.1.37.1.1.14 atmClpNoTaggingScrCdvt 0 0 This traffic descriptor type is for CLP with
    Sustained Cell Rate and no tagging. The use
    of the parameter vector for this type:
    P…
    1.3.6.1.2.1.37.1.1.15 atmClpTaggingScrCdvt 0 0 This traffic descriptor type is for CLP with
    tagging and Sustained Cell Rate. The use of
    the parameter vector for this type:
    Para…