flowRuleInfoStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this flowRuleSetInfoEntry. If this value is
not active(1) the meter must not attempt to use the rows
associated RuleSet. Once its value has been set to active(1)
a manager may not change any of the other variables in the
row, nor the contents of the associated RuleSet. Any attempt
to do so should result in a notWritable(17) SNMP error-status
for such variables or objects.
To download a RuleSet, a manger could:
- Locate an open slot in the RuleSetInfoTable.
- Create a RuleSetInfoEntry by setting the status for this
open slot to createAndWait(5).
- Set flowRuleInfoSize and flowRuleInfoName as required.
- Download the rules into the rows rule table.
- Set flowRuleInfoStatus to active(1).
The RuleSet would then be ready to run. The manager is not
allowed to change the value of flowRuleInfoStatus from
active(1) if the associated RuleSet is being referenced by any
of the entries in the flowManagerInfoTable.
Setting RuleInfoStatus to destroy(6) destroys the associated
RuleSet together with any flow data collected by it."
View at oid-info.com
The status of this flowRuleSetInfoEntry. If this value is
not active(1) the meter must not attempt to use the row's
associated RuleSet. Once its value has been set to active(1)
a manager may not change any of the other variables in the
row, nor the contents of the associated RuleSet. Any attempt
to do so should result in a notWritable(17) SNMP error-status
for such variables or objects.
To download a RuleSet, a manger could:
- Locate an open slot in the RuleSetInfoTable.
- Create a RuleSetInfoEntry by setting the status for this
open slot to createAndWait(5).
- Set flowRuleInfoSize and flowRuleInfoName as required.
- Download the rules into the row's rule table.
- Set flowRuleInfoStatus to active(1).
The RuleSet would then be ready to run. The manager is not
allowed to change the value of flowRuleInfoStatus from
active(1) if the associated RuleSet is being referenced by any
of the entries in the flowManagerInfoTable.
Setting RuleInfoStatus to destroy(6) destroys the associated
RuleSet together with any flow data collected by it.
Parsed from file rfc2720-Traffic-Flow-Measurement---Meter.mib.txt
Company: None
Module: FLOW-METER-MIB
The status of this flowRuleSetInfoEntry. If this value is
not active(1) the meter must not attempt to use the row's
associated RuleSet. Once its value has been set to active(1)
a manager may not change any of the other variables in the
row, nor the contents of the associated RuleSet. Any attempt
to do so should result in a notWritable(17) SNMP error-status
for such variables or objects.
To download a RuleSet, a manger could:
- Locate an open slot in the RuleSetInfoTable.
- Create a RuleSetInfoEntry by setting the status for this
open slot to createAndWait(5).
- Set flowRuleInfoSize and flowRuleInfoName as required.
- Download the rules into the row's rule table.
- Set flowRuleInfoStatus to active(1).
The RuleSet would then be ready to run. The manager is not
allowed to change the value of flowRuleInfoStatus from
active(1) if the associated RuleSet is being referenced by any
of the entries in the flowManagerInfoTable.
Setting RuleInfoStatus to destroy(6) destroys the associated
RuleSet together with any flow data collected by it.
Parsed from file FLOW-METER-MIB.mib
Module: FLOW-METER-MIB
Automatically extracted from RFC2720
flowRuleInfoStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this flowRuleSetInfoEntry. If this value is not active(1) the meter must not attempt to use the row's associated RuleSet. Once its value has been set to active(1) a manager may not change any of the other variables in the row, nor the contents of the associated RuleSet. Any attempt to do so should result in a notWritable(17) SNMP error-status for such variables or objects. To download a RuleSet, a manger could: - Locate an open slot in the RuleSetInfoTable. - Create a RuleSetInfoEntry by setting the status for this open slot to createAndWait(5). - Set flowRuleInfoSize and flowRuleInfoName as required. - Download the rules into the row's rule table. - Set flowRuleInfoStatus to active(1). The RuleSet would then be ready to run. The manager is not allowed to change the value of flowRuleInfoStatus from active(1) if the associated RuleSet is being referenced by any of the entries in the flowManagerInfoTable. Setting RuleInfoStatus to destroy(6) destroys the associated RuleSet together with any flow data collected by it." ::= { flowRuleSetInfoEntry 5 }
flowRuleInfoStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this flowRuleSetInfoEntry. If this value is not active(1) the meter must not attempt to use the row's associated RuleSet. Once its value has been set to active(1) a manager may not change any of the other variables in the row, nor the contents of the associated RuleSet. Any attempt to do so should result in a notWritable(17) SNMP error-status for such variables or objects. To download a RuleSet, a manger could: - Locate an open slot in the RuleSetInfoTable. - Create a RuleSetInfoEntry by setting the status for this open slot to createAndWait(5). - Set flowRuleInfoSize and flowRuleInfoName as required. - Download the rules into the row's rule table. - Set flowRuleInfoStatus to active(1). The RuleSet would then be ready to run. The manager is not allowed to change the value of flowRuleInfoStatus from active(1) if the associated RuleSet is being referenced by any of the entries in the flowManagerInfoTable. Setting RuleInfoStatus to destroy(6) destroys the associated RuleSet together with any flow data collected by it." ::= { flowRuleSetInfoEntry 5 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.40.1.1.1.1 | flowRuleInfoIndex | 0 | 0 | An index which selects an entry in the flowRuleSetInfoTable. Each such entry contains control information for a particular RuleSe… |
1.3.6.1.2.1.40.1.1.1.2 | flowRuleInfoSize | 0 | 0 | Number of rules in this RuleSet. Setting this variable will cause the meter to allocate space for these rules. |
1.3.6.1.2.1.40.1.1.1.3 | flowRuleInfoOwner | 0 | 0 | Identifies the manager which 'owns' this RuleSet. A manager must set this variable when creating a row in this table. |
1.3.6.1.2.1.40.1.1.1.4 | flowRuleInfoTimeStamp | 0 | 0 | Time this row's associated RuleSet was last changed. |
1.3.6.1.2.1.40.1.1.1.6 | flowRuleInfoName | 0 | 0 | An alphanumeric identifier used by managers and readers to identify a RuleSet. For example, a manager wishing to run a RuleSet n… |
1.3.6.1.2.1.40.1.1.1.7 | flowRuleInfoRulesReady | 0 | 0 | Indicates whether the rules for this row's associated RuleSet are ready for use. The meter will refuse to 'run' the RuleSet unle… |
1.3.6.1.2.1.40.1.1.1.8 | flowRuleInfoFlowRecords | 0 | 0 | The number of entries in the flow table for this RuleSet. These may be current (waiting for collection by one or more meter reade… |