vgRptrPortRptrInfoIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the repeater that this
port is currently mapped to. The repeater
identified by a particular value of this object
is the same as that identified by the same value
of vgRptrInfoIndex. A value of zero indicates
that this port is not currently mapped to any
repeater."
View at oid-info.com
This object identifies the repeater that this
port is currently mapped to. The repeater
identified by a particular value of this object
is the same as that identified by the same value
of vgRptrInfoIndex. A value of zero indicates
that this port is not currently mapped to any
repeater.
Parsed from file DOT12-RPTR-MIB.mib
Module: DOT12-RPTR-MIB
Automatically extracted from RFC2266
vgRptrPortRptrInfoIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the repeater that this port is currently mapped to. The repeater identified by a particular value of this object is the same as that identified by the same value of vgRptrInfoIndex. A value of zero indicates that this port is not currently mapped to any repeater." ::= { vgRptrBasicPortEntry 11 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.53.1.1.3.1.1.1 | vgRptrPortIndex | 0 | 0 | This object identifies the port within the group for which this entry contains information. This identifies the port independent… |
| 1.3.6.1.2.1.53.1.1.3.1.1.2 | vgRptrPortType | 0 | 0 | Describes the type of port. One of the following: cascadeExternal - Port is an uplink with physical connections which are external… |
| 1.3.6.1.2.1.53.1.1.3.1.1.3 | vgRptrPortAdminStatus | 0 | 0 | Port enable/disable function. Enabling a disabled port will cause training to be initiated by the training initiator (the slave m… |
| 1.3.6.1.2.1.53.1.1.3.1.1.4 | vgRptrPortOperStatus | 0 | 0 | Current status for the port as specified by the PORT_META_STATE in the port process module of clause 12 [IEEE Std 802.12]. During … |
| 1.3.6.1.2.1.53.1.1.3.1.1.5 | vgRptrPortSupportedPromiscMode | 0 | 0 | This object describes whether the port hardware is capable of supporting promiscuous mode, single address mode (i.e., repeater fi… |
| 1.3.6.1.2.1.53.1.1.3.1.1.6 | vgRptrPortSupportedCascadeMode | 0 | 0 | This object describes whether the port hardware is capable of supporting cascaded repeaters, end nodes, or both. A port for whic… |
| 1.3.6.1.2.1.53.1.1.3.1.1.7 | vgRptrPortAllowedTrainType | 0 | 0 | This security object is set by the network manager to configure what type of device is permitted to connect to the port. One of … |
| 1.3.6.1.2.1.53.1.1.3.1.1.8 | vgRptrPortLastTrainConfig | 0 | 0 | This object is a 16 bit field. For local ports, this object contains the requested configuration field from the most recent erro… |
| 1.3.6.1.2.1.53.1.1.3.1.1.9 | vgRptrPortTrainingResult | 0 | 0 | This 18 bit field is used to indicate the result of training. It contains two bits which indicate if error-free training frames … |
| 1.3.6.1.2.1.53.1.1.3.1.1.10 | vgRptrPortPriorityEnable | 0 | 0 | A configuration flag used to determine whether the repeater will service high priority requests received on the port as high prio… |