If set to upgradeFromMgt(1), the device will initiate a
TFTP software image download using docsDevSwFilename.
After successfully receiving an image, the device will
set its state to ignoreProvisioningUpgrade(3) and reboot.
If the download process is interrupted by a reset or
power failure, the device will load the previous image
and, after re-initialization, continue to attempt loading
the image specified in docsDevSwFilename.
If set to allowProvisioningUpgrade(2), the device will
use the software version information supplied by the
provisioning server when next rebooting (this does not
cause a reboot).
When set to ignoreProvisioningUpgrade(3), the device
will disregard software image upgrade information from the
provisioning server.
Note that reading this object can return upgradeFromMgt(1).
This indicates that a software download is currently in
progress, and that the device will reboot after
successfully receiving an image.
At initial startup, this object has the default value of
allowProvisioningUpgrade(2).
Parsed from file DOCS-CABLE-DEVICE-MIB.mib
Module: DOCS-CABLE-DEVICE-MIB
If set to upgradeFromMgt(1), the device will initiate a
TFTP or HTTP software image download. After
successfully receiving an image, the device will set
its state to ignoreProvisioningUpgrade(3) and reboot.
If the download process is interrupted (e.g., by a reset
or power failure), the device will load the previous
image and, after re-initialization, continue to attempt
loading the image specified in docsDevSwFilename.
If set to allowProvisioningUpgrade(2), the device will
use the software version information supplied by the
provisioning server when next rebooting (this does not
cause a reboot).
When set to ignoreProvisioningUpgrade(3), the device
will disregard software image upgrade information
from the provisioning server.
Note that reading this object can return
upgradeFromMgt(1). This indicates that a software
download is currently in progress, and that the device
will reboot after successfully receiving an image.
docsDevSwAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
upgradeFromMgt(1),
allowProvisioningUpgrade(2),
ignoreProvisioningUpgrade(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to upgradeFromMgt(1), the device will initiate a
TFTP software image download using docsDevSwFilename.
After successfully receiving an image, the device will
set its state to ignoreProvisioningUpgrade(3) and reboot.
If the download process is interrupted by a reset or
power failure, the device will load the previous image
and, after re-initialization, continue to attempt loading
the image specified in docsDevSwFilename.
If set to allowProvisioningUpgrade(2), the device will
use the software version information supplied by the
provisioning server when next rebooting (this does not
cause a reboot).
When set to ignoreProvisioningUpgrade(3), the device
will disregard software image upgrade information from the
provisioning server.
Note that reading this object can return upgradeFromMgt(1).
This indicates that a software download is currently in
progress, and that the device will reboot after
successfully receiving an image.
At initial startup, this object has the default value of
allowProvisioningUpgrade(2)."
View at oid-info.com
If set to upgradeFromMgt(1), the device will initiate a
TFTP or HTTP software image download. After
successfully receiving an image, the device will set
its state to ignoreProvisioningUpgrade(3) and reboot.
If the download process is interrupted (e.g., by a reset
or power failure), the device will load the previous
image and, after re-initialization, continue to attempt
loading the image specified in docsDevSwFilename.
If set to allowProvisioningUpgrade(2), the device will
use the software version information supplied by the
provisioning server when next rebooting (this does not
cause a reboot).
When set to ignoreProvisioningUpgrade(3), the device
will disregard software image upgrade information
from the provisioning server.
Note that reading this object can return
upgradeFromMgt(1). This indicates that a software
download is currently in progress, and that the device
will reboot after successfully receiving an image.
Parsed from file rfc4639-DOCSIS-Cable-Device.mib.txt
Company: None
Module: DOCS-CABLE-DEVICE-MIB
If set to upgradeFromMgt(1), the device will initiate a
TFTP or HTTP software image download. After
successfully receiving an image, the device will set
its state to ignoreProvisioningUpgrade(3) and reboot.
If the download process is interrupted (e.g., by a reset
or power failure), the device will load the previous
image and, after re-initialization, continue to attempt
loading the image specified in docsDevSwFilename.
If set to allowProvisioningUpgrade(2), the device will
use the software version information supplied by the
provisioning server when next rebooting (this does not
cause a reboot).
When set to ignoreProvisioningUpgrade(3), the device
will disregard software image upgrade information
from the provisioning server.
Note that reading this object can return
upgradeFromMgt(1). This indicates that a software
download is currently in progress, and that the device
will reboot after successfully receiving an image.
docsDevSwAdminStatus OBJECT-TYPE SYNTAX INTEGER { upgradeFromMgt(1), allowProvisioningUpgrade(2), ignoreProvisioningUpgrade(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If set to upgradeFromMgt(1), the device will initiate a TFTP software image download using docsDevSwFilename. After successfully receiving an image, the device will set its state to ignoreProvisioningUpgrade(3) and reboot. If the download process is interrupted by a reset or power failure, the device will load the previous image and, after re-initialization, continue to attempt loading the image specified in docsDevSwFilename. If set to allowProvisioningUpgrade(2), the device will use the software version information supplied by the provisioning server when next rebooting (this does not cause a reboot). When set to ignoreProvisioningUpgrade(3), the device will disregard software image upgrade information from the provisioning server. Note that reading this object can return upgradeFromMgt(1). This indicates that a software download is currently in progress, and that the device will reboot after successfully receiving an image. At initial startup, this object has the default value of allowProvisioningUpgrade(2)." ::= { docsDevSoftware 3 }
docsDevSwAdminStatus OBJECT-TYPE SYNTAX INTEGER { upgradeFromMgt(1), allowProvisioningUpgrade(2), ignoreProvisioningUpgrade(3) } ACCESS read-write STATUS mandatory DESCRIPTION "If set to upgradeFromMgt(1), the device will initiate a TFTP or HTTP software image download. After successfully receiving an image, the device will set its state to ignoreProvisioningUpgrade(3) and reboot. If the download process is interrupted (e.g., by a reset or power failure), the device will load the previous image and, after re-initialization, continue to attempt loading the image specified in docsDevSwFilename. If set to allowProvisioningUpgrade(2), the device will use the software version information supplied by the provisioning server when next rebooting (this does not cause a reboot). When set to ignoreProvisioningUpgrade(3), the device will disregard software image upgrade information from the provisioning server. Note that reading this object can return upgradeFromMgt(1). This indicates that a software download is currently in progress, and that the device will reboot after successfully receiving an image." DEFVAL { allowProvisioningUpgrade } ::= { docsDevSoftware 3 }
Automatically extracted from RFC2669
docsDevSwAdminStatus OBJECT-TYPE SYNTAX INTEGER { upgradeFromMgt(1), allowProvisioningUpgrade(2), ignoreProvisioningUpgrade(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If set to upgradeFromMgt(1), the device will initiate a TFTP or HTTP software image download. After successfully receiving an image, the device will set its state to ignoreProvisioningUpgrade(3) and reboot. If the download process is interrupted (e.g., by a reset or power failure), the device will load the previous image and, after re-initialization, continue to attempt loading the image specified in docsDevSwFilename. If set to allowProvisioningUpgrade(2), the device will use the software version information supplied by the provisioning server when next rebooting (this does not cause a reboot). When set to ignoreProvisioningUpgrade(3), the device will disregard software image upgrade information from the provisioning server. Note that reading this object can return upgradeFromMgt(1). This indicates that a software download is currently in progress, and that the device will reboot after successfully receiving an image." DEFVAL { allowProvisioningUpgrade } ::= { docsDevSoftware 3 }
docsDevSwAdminStatus OBJECT-TYPE SYNTAX INTEGER { upgradeFromMgt(1), allowProvisioningUpgrade(2), ignoreProvisioningUpgrade(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If set to upgradeFromMgt(1), the device will initiate a TFTP or HTTP software image download. After successfully receiving an image, the device will set its state to ignoreProvisioningUpgrade(3) and reboot. If the download process is interrupted (e.g., by a reset or power failure), the device will load the previous image and, after re-initialization, continue to attempt loading the image specified in docsDevSwFilename. If set to allowProvisioningUpgrade(2), the device will use the software version information supplied by the provisioning server when next rebooting (this does not cause a reboot). When set to ignoreProvisioningUpgrade(3), the device will disregard software image upgrade information from the provisioning server. Note that reading this object can return upgradeFromMgt(1). This indicates that a software download is currently in progress, and that the device will reboot after successfully receiving an image." DEFVAL { allowProvisioningUpgrade } ::= { docsDevSoftware 3 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.69.1.3.3.0 | docsDevSwAdminStatus | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.69.1.3.1 | docsDevSwServer | 1 | 1 | docsDevSwServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The address of the TFTP server u… |
1.3.6.1.2.1.69.1.3.2 | docsDevSwFilename | 1 | 1 | The file name of the software image to be loaded into this device. Unless set via SNMP, this is the file name specified by the pr… |
1.3.6.1.2.1.69.1.3.4 | docsDevSwOperStatus | 1 | 1 | InProgress(1) indicates that a TFTP download is underway, either as a result of a version mismatch at provisioning or as a result… |
1.3.6.1.2.1.69.1.3.5 | docsDevSwCurrentVers | 1 | 1 | The software version currently operating in this device. This string's syntax is that used by the individual vendor to identify s… |
1.3.6.1.2.1.69.1.3.6 | docsDevSwServerAddressType, docsDevSwServerAddress | 1 | 1 | The type of address of the TFTP or HTTP server used for software upgrades. If docsDevSwServerTransportProtocol is currently set t… |
1.3.6.1.2.1.69.1.3.7 | docsDevSwServerAddress | 1 | 1 | The address of the TFTP or HTTP server used for software upgrades. If the TFTP/HTTP server is unknown, return the zero- length add… |
1.3.6.1.2.1.69.1.3.8 | docsDevSwServerTransportProtocol | 1 | 1 | This object specifies the transport protocol (TFTP or HTTP) to be used for software upgrades. If the value of this object is tftp… |