Controls and reflects the status of rows in this
table. Specifying only this object (with the appropriate
index) on a CM is sufficient to create a filter row which
matches all inbound packets on the ethernet interface,
and results in the packets being
discarded. docsDevFilterIpIfIndex (at least) must be
specified on a CMTS to create a row. Creation of the
rows may be done via either create-and-wait or
create-and-go, but the filter is not applied until this
object is set to (or changes to) active. There is no
restriction in changing any object in a row while this
object is set to active.
Parsed from file DOCS-CABLE-DEVICE-MIB.mib
Module: DOCS-CABLE-DEVICE-MIB
Controls and reflects the status of rows in this
table. Specifying only this object (with the
appropriate index) on a CM is sufficient to create a
filter row that matches all inbound packets on the
ethernet interface and results in the packets being
discarded. docsDevFilterIpIfIndex (at least) must be
specified on a CMTS to create a row. Creation of the
rows may be done via either create-and-wait or
create-and-go, but the filter is not applied until this
object is set to (or changes to) active. There is no
restriction in changing any object in a row while this
object is set to active.
docsDevFilterIpStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls and reflects the status of rows in this
table. Specifying only this object (with the appropriate
index) on a CM is sufficient to create a filter row which
matches all inbound packets on the ethernet interface,
and results in the packets being
discarded. docsDevFilterIpIfIndex (at least) must be
specified on a CMTS to create a row. Creation of the
rows may be done via either create-and-wait or
create-and-go, but the filter is not applied until this
object is set to (or changes to) active. There is no
restriction in changing any object in a row while this
object is set to active."
View at oid-info.com
Controls and reflects the status of rows in this
table. Specifying only this object (with the
appropriate index) on a CM is sufficient to create a
filter row that matches all inbound packets on the
ethernet interface and results in the packets being
discarded. docsDevFilterIpIfIndex (at least) must be
specified on a CMTS to create a row. Creation of the
rows may be done via either create-and-wait or
create-and-go, but the filter is not applied until this
object is set to (or changes to) active. There is no
restriction in changing any object in a row while this
object is set to active.
Parsed from file rfc4639-DOCSIS-Cable-Device.mib.txt
Company: None
Module: DOCS-CABLE-DEVICE-MIB
Controls and reflects the status of rows in this
table. Specifying only this object (with the
appropriate index) on a CM is sufficient to create a
filter row that matches all inbound packets on the
ethernet interface and results in the packets being
discarded. docsDevFilterIpIfIndex (at least) must be
specified on a CMTS to create a row. Creation of the
rows may be done via either create-and-wait or
create-and-go, but the filter is not applied until this
object is set to (or changes to) active. There is no
restriction in changing any object in a row while this
object is set to active.
docsDevFilterIpStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls and reflects the status of rows in this table. Specifying only this object (with the appropriate index) on a CM is sufficient to create a filter row which matches all inbound packets on the ethernet interface, and results in the packets being discarded. docsDevFilterIpIfIndex (at least) must be specified on a CMTS to create a row. Creation of the rows may be done via either create-and-wait or create-and-go, but the filter is not applied until this object is set to (or changes to) active. There is no restriction in changing any object in a row while this object is set to active." ::= { docsDevFilterIpEntry 2 }
docsDevFilterIpStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS deprecated DESCRIPTION "Controls and reflects the status of rows in this table. Specifying only this object (with the appropriate index) on a CM is sufficient to create a filter row that matches all inbound packets on the ethernet interface and results in the packets being discarded. docsDevFilterIpIfIndex (at least) must be specified on a CMTS to create a row. Creation of the rows may be done via either create-and-wait or create-and-go, but the filter is not applied until this object is set to (or changes to) active. There is no restriction in changing any object in a row while this object is set to active." ::= { docsDevFilterIpEntry 2 }
Automatically extracted from RFC2669
docsDevFilterIpStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Controls and reflects the status of rows in this table. Specifying only this object (with the appropriate index) on a CM is sufficient to create a filter row that matches all inbound packets on the ethernet interface and results in the packets being discarded. docsDevFilterIpIfIndex (at least) must be specified on a CMTS to create a row. Creation of the rows may be done via either create-and-wait or create-and-go, but the filter is not applied until this object is set to (or changes to) active. There is no restriction in changing any object in a row while this object is set to active." ::= { docsDevFilterIpEntry 2 }
docsDevFilterIpStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Controls and reflects the status of rows in this table. Specifying only this object (with the appropriate index) on a CM is sufficient to create a filter row that matches all inbound packets on the ethernet interface and results in the packets being discarded. docsDevFilterIpIfIndex (at least) must be specified on a CMTS to create a row. Creation of the rows may be done via either create-and-wait or create-and-go, but the filter is not applied until this object is set to (or changes to) active. There is no restriction in changing any object in a row while this object is set to active." ::= { docsDevFilterIpEntry 2 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.69.1.6.4.1.1 | docsDevFilterIpIndex | 0 | 0 | Index used to order the application of filters. The filter with the lowest index is always applied first. |
1.3.6.1.2.1.69.1.6.4.1.3 | docsDevFilterIpControl | 0 | 0 | If set to discard(1), all packets matching this filter will be discarded and scanning of the remainder of the filter list will be… |
1.3.6.1.2.1.69.1.6.4.1.4 | docsDevFilterIpIfIndex | 0 | 0 | docsDevFilterIpIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The entry int… |
1.3.6.1.2.1.69.1.6.4.1.5 | docsDevFilterIpDirection | 0 | 0 | Determines whether the filter is applied to inbound(1) traffic, outbound(2) traffic, or traffic in both(3) directions. |
1.3.6.1.2.1.69.1.6.4.1.6 | docsDevFilterIpBroadcast | 0 | 0 | If set to true(1), the filter only applies to multicast and broadcast traffic. If set to false(2), the filter applies to all traf… |
1.3.6.1.2.1.69.1.6.4.1.7 | docsDevFilterIpSaddr | 0 | 0 | The source IP address, or portion thereof, that is to be matched for this filter. The source address is first masked (ANDed) aga… |
1.3.6.1.2.1.69.1.6.4.1.8 | docsDevFilterIpSmask | 0 | 0 | A bit mask that is to be applied to the source address prior to matching. This mask is not necessarily the same as a subnet mask,… |
1.3.6.1.2.1.69.1.6.4.1.9 | docsDevFilterIpDaddr | 0 | 0 | The destination IP address, or portion thereof, that is to be matched for this filter. The destination address is first masked (a… |
1.3.6.1.2.1.69.1.6.4.1.10 | docsDevFilterIpDmask | 0 | 0 | A bit mask that is to be applied to the destination address prior to matching. This mask is not necessarily the same as a subnet … |
1.3.6.1.2.1.69.1.6.4.1.11 | docsDevFilterIpProtocol | 0 | 0 | The IP protocol value that is to be matched. For example: icmp is 1, tcp is 6, udp is 17. A value of 256 matches ANY protocol. |
1.3.6.1.2.1.69.1.6.4.1.12 | docsDevFilterIpSourcePortLow | 0 | 0 | If docsDevFilterIpProtocol is udp or tcp, this is the inclusive lower bound of the transport-layer source port range that is to b… |
1.3.6.1.2.1.69.1.6.4.1.13 | docsDevFilterIpSourcePortHigh | 0 | 0 | If docsDevFilterIpProtocol is udp or tcp, this is the inclusive upper bound of the transport-layer source port range that is to b… |
1.3.6.1.2.1.69.1.6.4.1.14 | docsDevFilterIpDestPortLow | 0 | 0 | If docsDevFilterIpProtocol is udp or tcp, this is the inclusive lower bound of the transport-layer destination port range that is… |
1.3.6.1.2.1.69.1.6.4.1.15 | docsDevFilterIpDestPortHigh | 0 | 0 | If docsDevFilterIpProtocol is udp or tcp, this is the inclusive upper bound of the transport-layer destination port range that is… |
1.3.6.1.2.1.69.1.6.4.1.16 | docsDevFilterIpMatches | 0 | 0 | Counts the number of times this filter was matched. This object is initialized to 0 at boot, or at row creation, and is reset onl… |
1.3.6.1.2.1.69.1.6.4.1.17 | docsDevFilterIpTos | 0 | 0 | This is the value to be matched to the packet's TOS (Type of Service) value (after the TOS value is AND'd with docsDevFilterIpTos… |
1.3.6.1.2.1.69.1.6.4.1.18 | docsDevFilterIpTosMask | 0 | 0 | The mask to be applied to the packet's TOS value before matching. |
1.3.6.1.2.1.69.1.6.4.1.19 | docsDevFilterIpContinue | 0 | 0 | If this value is set to true, and docsDevFilterIpControl is anything but discard (1), continue scanning and applying policies. |
1.3.6.1.2.1.69.1.6.4.1.20 | docsDevFilterIpPolicyId | 0 | 0 | This object points to an entry in docsDevFilterPolicyTable. If docsDevFilterIpControl is set to policy (3), execute all matching … |
1.3.6.1.2.1.69.1.6.4.1.21 | docsDevFilterIpInterfaces | 0 | 0 | Specifies the set of interfaces this filter applies to. Each octet within the value of this object specifies a set of eight inter… |
1.3.6.1.2.1.69.1.6.4.1.22 | docsDevFilterIpInterfaceSet | 0 | 0 | This is a convenience object for setting the value of docsDevFilterIpInterfaces. Upon read this always returns other (1). Upon … |