Reference record for OID 1.3.6.1.2.1.69.1.7.1

parent

1.3.6.1.2.1.69.1.7 (docsDevCpe)

node code

1

node name

docsDevCpeEnroll

dot oid

1.3.6.1.2.1.69.1.7.1

type

OBJECT-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) docsDev(69) docsDevMIBObjects(1) docsDevCpe(7) docsDevCpeEnroll(1)}

{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) docsDev(69) docsDevMIBObjects(1) docsDevCpe(7) docsDevCpeEnroll(1)}

{iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) docsDev(69) docsDevMIBObjects(1) docsDevCpe(7) docsDevCpeEnroll(1)}

{iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) docsDev(69) docsDevMIBObjects(1) docsDevCpe(7) docsDevCpeEnroll(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) docsDev(69) docsDevMIBObjects(1) docsDevCpe(7) docsDevCpeEnroll(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) docsDev(69) docsDevMIBObjects(1) docsDevCpe(7) docsDevCpeEnroll(1)}

iri oid

/iso/identified-organization/dod/internet/mgmt/mib-2/docsDev/docsDevMIBObjects/docsDevCpe/docsDevCpeEnroll

/iso/identified-organization/dod/internet/mgmt/mib/docsDev/docsDevMIBObjects/docsDevCpe/docsDevCpeEnroll

/iso/org/dod/internet/mgmt/mib-2/docsDev/docsDevMIBObjects/docsDevCpe/docsDevCpeEnroll

/iso/org/dod/internet/mgmt/mib/docsDev/docsDevMIBObjects/docsDevCpe/docsDevCpeEnroll

/iso/iso-identified-organization/dod/internet/mgmt/mib-2/docsDev/docsDevMIBObjects/docsDevCpe/docsDevCpeEnroll

/iso/iso-identified-organization/dod/internet/mgmt/mib/docsDev/docsDevMIBObjects/docsDevCpe/docsDevCpeEnroll

iri by oid_info

/ISO/Identified-Organization/6/1/2/1/69/1/7/1

Description by circitor

This object controls the population of docsDevFilterCpeTable.
If set to none, the filters must be set manually.
If set to any, the CM wiretaps the packets originating
from the ethernet and enrolls up to docsDevCpeIpMax
addresses based on the source IPv4 or v6 addresses of those
packets. At initial system startup, default value for this
object is any(2).

Parsed from file DOCS-CABLE-DEVICE-MIB.mib
Module: DOCS-CABLE-DEVICE-MIB

Description by cisco_v1

This object controls the population of
docsDevFilterCpeTable.
If set to none, the filters must be set manually
by a network management action (either configuration
or SNMP set).
If set to any, the CM wiretaps the packets originating
from the ethernet and enrolls up to docsDevCpeIpMax
addresses as based on the source IPv4 or v6 addresses of
those packets.

Description by oid_info

docsDevCpeEnroll OBJECT-TYPE
SYNTAX INTEGER {
none(1),
any(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the population of docsDevFilterCpeTable.
If set to none, the filters must be set manually.
If set to any, the CM wiretaps the packets originating
from the ethernet and enrolls up to docsDevCpeIpMax
addresses based on the source IP addresses of those
packets. At initial system startup, default value for this
object is any(2)."
View at oid-info.com

Description by mibdepot

This object controls the population of
docsDevFilterCpeTable.
If set to none, the filters must be set manually
by a network management action (either configuration
or SNMP set).
If set to any, the CM wiretaps the packets originating
from the ethernet and enrolls up to docsDevCpeIpMax
addresses as based on the source IPv4 or v6 addresses of
those packets.

Parsed from file rfc4639-DOCSIS-Cable-Device.mib.txt
Company: None
Module: DOCS-CABLE-DEVICE-MIB

Description by cisco

This object controls the population of
docsDevFilterCpeTable.
If set to none, the filters must be set manually
by a network management action (either configuration
or SNMP set).
If set to any, the CM wiretaps the packets originating
from the ethernet and enrolls up to docsDevCpeIpMax
addresses as based on the source IPv4 or v6 addresses of
those packets.

Information by circitor

docsDevCpeEnroll OBJECT-TYPE
        SYNTAX      INTEGER {
            none(1),
            any(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "This object controls the population of docsDevFilterCpeTable.
        If set to none, the filters must be set manually.
        If set to any, the CM wiretaps the packets originating
        from the ethernet and enrolls up to docsDevCpeIpMax
        addresses based on the source IPv4 or v6  addresses of those
        packets. At initial system startup, default value for this
        object is any(2)."
        ::= { docsDevCpe 1 }

Information by cisco_v1

docsDevCpeEnroll OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        any(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object controls the population of
        docsDevFilterCpeTable.
        If set to none, the filters must be set manually
        by a network management action (either configuration
        or SNMP set).
        If set to any, the CM wiretaps the packets originating
        from the ethernet and enrolls up to docsDevCpeIpMax
        addresses as based on the source IPv4 or v6 addresses of
        those packets."
    DEFVAL { any }
    ::= { docsDevCpe 1 }

Information by oid_info

Automatically extracted from RFC2669

Information by mibdepot

docsDevCpeEnroll OBJECT-TYPE
           SYNTAX      INTEGER {
               none(1),
               any(2)
           }
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
               "This object controls the population of
                docsDevFilterCpeTable.
                If set to none, the filters must be set manually
                by a network management action (either configuration
                or SNMP set).
                If set to any, the CM wiretaps the packets originating
                from the ethernet and enrolls up to docsDevCpeIpMax
                addresses as based on the source IPv4 or v6 addresses of
                those packets."
           DEFVAL { any }
           ::= { docsDevCpe 1 }

Information by cisco

docsDevCpeEnroll OBJECT-TYPE
    SYNTAX          INTEGER  {
                        none(1),
                        any(2)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object controls the population of
        docsDevFilterCpeTable.
        If set to none, the filters must be set manually
        by a network management action (either configuration
        or SNMP set).
        If set to any, the CM wiretaps the packets originating
        from the ethernet and enrolls up to docsDevCpeIpMax
        addresses as based on the source IPv4 or v6 addresses of
        those packets."
    DEFVAL          { any } 
    ::= { docsDevCpe 1 }

First Registration Authority (recovered by parent 1.3.6)

Defense Communication Agency

Current Registration Authority (recovered by parent 1.3.6.1.2)

Internet Assigned Numbers Authority

Children (1)

Brothers (3)