This object specifies the default HelloDeadInterval parameter to
use in the Hello protocol keep-alive phase. It indicates how long
a device should wait before declaring the control channel dead.
The HelloDeadInterval parameter must be greater than the
HelloInterval parameter and should be at least three times the
value of HelloInterval.
Parsed from file rfc4631-Link-Management-Protocol-LMP.mib.txt
Company: ietf_rfcs
Module: LMP-MIB
lmpCcHelloDeadIntervalDefault OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the default HelloDeadInterval parameter to use in the Hello protocol keep-alive phase. It indicates how long a device should wait before declaring the control channel dead. The HelloDeadInterval parameter must be greater than the HelloInterval parameter and should be at least three times the value of HelloInterval." REFERENCE "draft-ietf-ccamp-lmp-01.txt - Link Management Protocol (LMP), J. Lang, K. Mitra, J. Drake, K. Kompella, Y. Rekhter, L. Berger, D. Saha, D. Basak, H. Sandick, A. Zinin, B. Rajagopalan, September 2001." ::= { lmpObjects 6 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.3.113.1.1 | lmpAdminStatus | 0 | 0 | The desired operational status of LMP on the node. Implementations should save the value of this object in persistent memory so t… |
| 1.3.6.1.3.113.1.2 | lmpOperStatus, lmpNbrTable | 1 | 7 | This table specifies the neighbor node to which control channels may be established. |
| 1.3.6.1.3.113.1.3 | lmpCcHelloIntervalDefault | 0 | 0 | This object specifies the default value for the HelloInterval parameter used in the Hello protocol keep-alive phase. It indicates… |
| 1.3.6.1.3.113.1.4 | lmpCcHelloIntervalDefaultMin | 0 | 0 | This object specifies the default minimum value for the HelloInterval parameter. |
| 1.3.6.1.3.113.1.5 | lmpCcHelloIntervalDefaultMax | 0 | 0 | This object specifies the default maximum value for the HelloInterval parameter. |
| 1.3.6.1.3.113.1.7 | lmpCcHelloDeadIntervalDefaultMin | 0 | 0 | This object specifies the default minimum value for the HelloDeadInterval parameter. |
| 1.3.6.1.3.113.1.8 | lmpCcHelloDeadIntervalDefaultMax | 0 | 0 | This object specifies the default maximum value for the HelloDeadInterval parameter. |
| 1.3.6.1.3.113.1.9 | lmpControlChannelTable | 1 | 21 | This table specifies LMP control channel information. |
| 1.3.6.1.3.113.1.10 | lmpControlChannelPerfTable | 1 | 48 | This table specifies LMP control channel performance counters. |
| 1.3.6.1.3.113.1.11 | lmpTeLinkTable | 1 | 8 | This table contains a collection of TE link. |
| 1.3.6.1.3.113.1.12 | lmpLinkVerificationInterval | 0 | 0 | This object indicates how often the link verification procedure is executed. The interval is in milliseconds. |
| 1.3.6.1.3.113.1.13 | lmpGlobalLinkVerificationInterval, lmpLinkVerificationTable | 1 | 9 | This table specifies TE link information associated with the LMP verification procedure. |
| 1.3.6.1.3.113.1.14 | lmpDataBearingLinkTable | 1 | 7 | This table specifies the data-bearing links managed by the LMP. |
| 1.3.6.1.3.113.1.15 | lmpDataBearingLinkPerfTable, lmpTeLinkPerfTable | 1 | 41 | This table specifies LMP TE link performance counters. |
| 1.3.6.1.3.113.1.16 | lmpLinkPropertyMismatchTrapEnable, lmpDataLinkTable | 1 | 11 | This table specifies the data-bearing links managed by the LMP. |
| 1.3.6.1.3.113.1.17 | lmpUnprotectedTrapEnable, lmpDataLinkPerfTable | 1 | 8 | If this object is true, then it enables the generation of lmpUnprotected trap, otherwise these traps are not emitted. |
| 1.3.6.1.3.113.1.18 | lmpNotificationMaxRate, lmpCcUpDownTrapEnable | 0 | 0 | If this object is true, then it enables the generation of lmpControlChannelUp and lmpControlChannelDown traps, otherwise these tr… |
| 1.3.6.1.3.113.1.19 | lmpTeLinkTrapEnable, lmpLinkPropertyNotificationsEnabled | 0 | 0 | If this object is true, then it enables the generation of lmpTeLinkDegraded trap, otherwise these traps are not emitted. |
| 1.3.6.1.3.113.1.20 | lmpUnprotectedNotificationsEnabled | 0 | 0 | If this object is true(1), then it enables the generation of lmpUnprotected notifications; otherwise, these notifications are not… |
| 1.3.6.1.3.113.1.21 | lmpCcUpDownNotificationsEnabled | 0 | 0 | If this object is true(1), then it enables the generation of lmpControlChannelUp and lmpControlChannelDown notifications; otherwi… |
| 1.3.6.1.3.113.1.22 | lmpTeLinkNotificationsEnabled | 0 | 0 | If this object is true(1), then it enables the generation of lmpTeLinkDegraded and lmpTeLinkNotDegraded notifications; otherwise,… |
| 1.3.6.1.3.113.1.23 | lmpDataLinkNotificationsEnabled | 0 | 0 | If this object is true(1), then it enables the generation of lmpDataLinkVerificationFailure notification; otherwise, these notifi… |