smfCfgInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmfCfgInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SMF Interface Table describes the SMF
interfaces that are participating in the
SMF packet forwarding process. The ifIndex is
from the interfaces group defined in the
Interfaces Group MIB module (RFC 2863). As such,
this table \sparse augments\ the iftable
specifically when SMF is to be configured to
operate over this interface.
A conceptual row in this table exists if and only
if either a manager has explicitly created the row
or there is an interface on the managed device
that automatically supports and runs SMF as part
of the device\s initialization process.
The manager creates a row in this table by setting
the rowStatus to \createAndGo\ or \createAndWait\.
Row objects having associated DEFVAL clauses are
automatically defined by the agent with these
values during row creation, unless the manager
explicitly defines these object values during the
row creation.
As the smfCfgInterfaceTable sparsely augments the
Iftable. Hence,
+ an entry cannot exist in smfCfgInterfaceTable
without a corresponding entry in the iftable.
+ if an entry in the iftable is removed, the
corresponding entry (if it exists) in the
smfCfgInterfaceTable MUST be removed.
+ the smfCfgIfStatus can have a value of
\enabled\ or \disabled\ independent of the
current value of the ifAdminStatus of the
corresponding entry in the iftable.
The values of the objects smfCfgAdminStatus and
smfCfgIfAdminStatus reflect the up-down status of
the SMF process running on the device and on the
specific interfaces, respectively. Hence,
+ the value of the smfCfgAdminStatus can be
\enabled\ or \disabled\ reflecting the current
running status of the SMF process on the device.
+ the value of the smfCfgIfAdminStatus can be
\enabled\ or \disabled\ if the value of the
smfCfgAdminStatus is set to \enabled\.
+ if the value of the smfCfgAdminStatus is
\disabled\, then the corresponding
smfCfgIfAdminStatus objects MUST be set
to \disabled\ in the smfCfgInterfaceTable.
+ once the value of the smfCfgAdminStatus changes
from \disabled\ to \enabled\, it is up to the
management system to make the corresponding
changes to the smfCfgIfAdminStatus values
back to \enabled\.
"
REFERENCE
"RFC 2863 - \The Interfaces Group MIB\, McCloghrie,
K., and F. Kastenholtz, June 2000."
View at oid-info.com
Automatically extracted from IETF RFC7367
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.3.126.1.2.14.1 | smfCfgInterfaceEntry | 3 | 3 | smfCfgInterfaceEntry OBJECT-TYPE SYNTAX SmfCfgInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SMF inte… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.3.126.1.2.1 | smfCfgAdminStatus | 0 | 0 | smfCfgAdminStatus OBJECT-TYPE SYNTAX SmfStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The configured status of the S… |
1.3.6.1.3.126.1.2.2 | smfCfgSmfSysUpTime | 0 | 0 | smfCfgSmfSysUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a s… |
1.3.6.1.3.126.1.2.3 | smfCfgRouterIDAddrType | 0 | 0 | smfCfgRouterIDAddrType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1), ipv6(2) } MAX-ACCESS read-write STATUS current DESCRIPTION… |
1.3.6.1.3.126.1.2.4 | smfCfgRouterID | 0 | 0 | smfCfgRouterID OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address use… |
1.3.6.1.3.126.1.2.5 | smfCfgOperationalMode | 0 | 0 | smfCfgOperationalMode OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The SMF RS… |
1.3.6.1.3.126.1.2.6 | smfCfgRssaMember | 0 | 0 | smfCfgRssaMember OBJECT-TYPE SYNTAX INTEGER { potential(1), always(2), never(3) } MAX-ACCESS read-write STATUS current DESCRIPT… |
1.3.6.1.3.126.1.2.7 | smfCfgIpv4Dpd | 0 | 0 | smfCfgIpv4Dpd OBJECT-TYPE SYNTAX INTEGER { hashBased(1), identificationBased(2) } MAX-ACCESS read-write STATUS current DESCRIPT… |
1.3.6.1.3.126.1.2.8 | smfCfgIpv6Dpd | 0 | 0 | smfCfgIpv6Dpd OBJECT-TYPE SYNTAX INTEGER { hashBased(1), identificationBased(2) } MAX-ACCESS read-write STATUS current DESCRIPT… |
1.3.6.1.3.126.1.2.9 | smfCfgMaxPktLifetime | 0 | 0 | smfCfgMaxPktLifetime OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "… |
1.3.6.1.3.126.1.2.10 | smfCfgDpdEntryMaxLifetime | 0 | 0 | smfCfgDpdEntryMaxLifetime OBJECT-TYPE SYNTAX Integer32 (0..65525) UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPT… |
1.3.6.1.3.126.1.2.11 | smfCfgNhdpRssaMesgTLVIncluded | 0 | 0 | smfCfgNhdpRssaMesgTLVIncluded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether… |
1.3.6.1.3.126.1.2.12 | smfCfgNhdpRssaAddrBlockTLVIncluded | 0 | 0 | smfCfgNhdpRssaAddrBlockTLVIncluded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates wh… |
1.3.6.1.3.126.1.2.13 | smfCfgAddrForwardingTable | 1 | 7 | smfCfgAddrForwardingTable OBJECT-TYPE SYNTAX SEQUENCE OF SmfCfgAddrForwardingEntry MAX-ACCESS not-accessible STATUS current DES… |