Reference record for OID 1.3.6.1.3.4.5.1


parent
1.3.6.1.3.4.5 (dot5TimerTable)
node code
1
node name
dot5TimerEntry
dot oid
1.3.6.1.3.4.5.1
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) dot5(4) dot5TimerTable(5) dot5TimerEntry(1)}
  • {iso(1) org(3) dod(6) internet(1) experimental(3) dot5(4) dot5TimerTable(5) dot5TimerEntry(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) experimental(3) dot5(4) dot5TimerTable(5) dot5TimerEntry(1)}
  • iri oid
  • /iso/identified-organization/dod/internet/experimental/dot5/dot5TimerTable/dot5TimerEntry
  • /iso/org/dod/internet/experimental/dot5/dot5TimerTable/dot5TimerEntry
  • /iso/iso-identified-organization/dod/internet/experimental/dot5/dot5TimerTable/dot5TimerEntry
  • iri by oid_info
    /ISO/Identified-Organization/6/1/3/4/5/1

    Description by oid_info

    dot5TimerEntry OBJECT-TYPE
    SYNTAX Dot5TimerEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
    "A list of Token Ring timer values for an
    802.5 interface."
    INDEX { dot5TimerIfIndex }

    View at oid-info.com

    Description by circitor

    A list of Token Ring timer values for an
    802.5 interface.

    Parsed from file RFC1231-MIB.mib
    Module: RFC1231-MIB

    Information by oid_info

    Automatically extracted from RFC1231

    Information by circitor

    dot5TimerEntry OBJECT-TYPE SYNTAX Dot5TimerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Token Ring timer values for an 802.5 interface." INDEX { dot5TimerIfIndex } ::= { dot5TimerTable 1 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.3)

    Internet Assigned Numbers Authority

    Children (11)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.3.4.5.1.1 dot5TimerIfIndex 0 0 The value of this object identifies the
    802.5 interface for which this entry
    contains timer values. The value of
    this object for …
    1.3.6.1.3.4.5.1.2 dot5TimerReturnRepeat 0 0 The time-out value used to ensure the
    interface will return to Repeat State, in
    units of 100 micro-seconds. The value
    should be g…
    1.3.6.1.3.4.5.1.3 dot5TimerHolding 0 0 Maximum period of time a station is
    permitted to transmit frames after capturing
    a token, in units of 100 micro-seconds.
    Implement…
    1.3.6.1.3.4.5.1.4 dot5TimerQueuePDU 0 0 The time-out value for enqueuing of an SMP
    PDU after reception of an AMP or SMP
    frame in which the A and C bits were
    equal to 0, i…
    1.3.6.1.3.4.5.1.5 dot5TimerValidTransmit 0 0 The time-out value used by the active
    monitor to detect the absence of valid
    transmissions, in units of 100
    micro-seconds.
    Implemen…
    1.3.6.1.3.4.5.1.6 dot5TimerNoToken 0 0 The time-out value used to recover from
    various-related error situations [9].
    If N is the maximum number of stations on
    the ring, …
    1.3.6.1.3.4.5.1.7 dot5TimerActiveMon 0 0 The time-out value used by the active
    monitor to stimulate the enqueuing of an
    AMP PDU for transmission, in units of
    100 micro-sec…
    1.3.6.1.3.4.5.1.8 dot5TimerStandbyMon 0 0 The time-out value used by the stand-by
    monitors to ensure that there is an active
    monitor on the ring and to detect a
    continuous …
    1.3.6.1.3.4.5.1.9 dot5TimerErrorReport 0 0 The time-out value which determines how
    often a station shall send a Report Error
    MAC frame to report its error counters,
    in units…
    1.3.6.1.3.4.5.1.10 dot5TimerBeaconTransmit 0 0 The time-out value which determines how
    long a station shall remain in the state
    of transmitting Beacon frames before
    entering the…
    1.3.6.1.3.4.5.1.11 dot5TimerBeaconReceive 0 0 The time-out value which determines how
    long a station shall receive Beacon
    frames from its downstream neighbor
    before entering th…