Reference record for OID 1.3.6.1.3.78.1.1


parent
1.3.6.1.3.78.1 (ipoaObjects)
node code
1
node name
ipoaLisTrapEnable
dot oid
1.3.6.1.3.78.1.1
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) ipOverAtm(78) ipoaObjects(1) ipoaLisTrapEnable(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) ipoaMIB(78) ipoaObjects(1) ipoaLisTrapEnable(1)}
  • {iso(1) org(3) dod(6) internet(1) experimental(3) ipOverAtm(78) ipoaObjects(1) ipoaLisTrapEnable(1)}
  • {iso(1) org(3) dod(6) internet(1) experimental(3) ipoaMIB(78) ipoaObjects(1) ipoaLisTrapEnable(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) experimental(3) ipOverAtm(78) ipoaObjects(1) ipoaLisTrapEnable(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) experimental(3) ipoaMIB(78) ipoaObjects(1) ipoaLisTrapEnable(1)}
  • iri oid
  • /iso/identified-organization/dod/internet/experimental/ipOverAtm/ipoaObjects/ipoaLisTrapEnable
  • /iso/identified-organization/dod/internet/experimental/ipoaMIB/ipoaObjects/ipoaLisTrapEnable
  • /iso/org/dod/internet/experimental/ipOverAtm/ipoaObjects/ipoaLisTrapEnable
  • /iso/org/dod/internet/experimental/ipoaMIB/ipoaObjects/ipoaLisTrapEnable
  • /iso/iso-identified-organization/dod/internet/experimental/ipOverAtm/ipoaObjects/ipoaLisTrapEnable
  • /iso/iso-identified-organization/dod/internet/experimental/ipoaMIB/ipoaObjects/ipoaLisTrapEnable
  • iri by oid_info
    /ISO/Identified-Organization/6/1/3/78/1/1

    Description by mibdepot

    Indicates whether ipoaLisCreate and ipoaLisDelete
    traps should be generated by this system.

    By default, this object should have the value
    enabled(1) for systems where ATMARP Servers are
    present and disabled(2) on systems where only
    clients reside.

    Parsed from file rfc2320.txt
    Company: marconi
    Module: IPOA-MIB

    Information by oid_info

    Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.

    Information by mibdepot

    ipoaLisTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether ipoaLisCreate and ipoaLisDelete traps should be generated by this system. By default, this object should have the value enabled(1) for systems where ATMARP Servers are present and disabled(2) on systems where only clients reside." ::= { ipoaObjects 1 }

    First Registration Authority (recovered by parent 1.3.6.1.3.78)

    White Ken

    Current Registration Authority (recovered by parent 1.3.6.1.3)

    Internet Assigned Numbers Authority

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.3.78.1.1.0 ipoaLisTrapEnable 0 0 None

    Brothers (7)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.3.78.1.2 ipoaLisTable 1 14 There is one entry in this table for every Logical IP
    Subnet (LIS) of which this system is a member.

    The bulk of the objects in …
    1.3.6.1.3.78.1.3 ipoaLisIfMappingTable 1 3 There is one entry in this table for every combination
    of ipoaLisEntry and IP over ATM interface.
    1.3.6.1.3.78.1.4 ipoaArpClientTable 1 18 The ATMARP clients running on this system.
    1.3.6.1.3.78.1.5 ipoaArpSrvrTable 1 15 The ATMARP Servers running on this system.
    1.3.6.1.3.78.1.6 ipoaArpRemoteSrvrTable 1 7 A table of non-local ATMARP Servers associated with a
    LIS. An entry in this table has three indexes: first
    the ipoaLisSubnetAddr…
    1.3.6.1.3.78.1.7 ipoaVcTable 1 7 A system that supports IP over ATM is an IP system and
    therefore MUST support all of the appropriate tables in
    the SNMPv2-MIB (RF…
    1.3.6.1.3.78.1.8 ipoaConfigPvcTable 1 6 This table MUST be supported when PVCs are intended to
    be supported in order to enable the setup of PVCs for
    use by IP.