The enable/disable status of this bridge. This object incorporates the
setting of the esrSwitchSTPConfig object. When
esrSwitchSTPConfig is set such that this bridge will not be active,
esrBridgeStatus returns disabled(2). If esrSwitchSTPConfig is set
such that this bridge will be active, and esrBridgeMode is enable(1), this
object returns enabled(2).
Parsed from file marconi-esr.mib.txt
Company: marconi
Module: MARCONI-ESR-MIB
Vendor: Marconi
Module: MARCONI-ESR-MIB (marconi-esr.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
esrBridgeStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The enable/disable status of this bridge. This object incorporates the setting of the esrSwitchSTPConfig object. When esrSwitchSTPConfig is set such that this bridge will not be active, esrBridgeStatus returns disabled(2). If esrSwitchSTPConfig is set such that this bridge will be active, and esrBridgeMode is enable(1), this object returns enabled(2)." ::= { esrBridgeEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.1 | esrBridgeIndex | 0 | 0 | An index that uniquely identifies this bridge. |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.2 | esrBridgeType | 0 | 0 | Indicates whether this is a legacy dot1d bridge consisting of all switch ports or a virtual bridge consisting of all virtual sub… |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.3 | esrBridgeMode | 0 | 0 | Used to enable or disable Spanning Tree for this bridge. When set to disable(2), all BPDUs are forwarded like regular multicast… |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.5 | esrBridgeStpPriority | 0 | 0 | The priority value of the Bridge Identifier. See dot1dStpPriority. |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.6 | esrBridgeStpTimeSinceTopologyChange | 0 | 0 | The time since the last topology change was detected. See dot1dStpTimeSinceTopologyChange. |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.7 | esrBridgeStpTopChanges | 0 | 0 | The total number of topology changes. See dot1dStpTopChanges |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.8 | esrBridgeStpDesignatedRoot | 0 | 0 | The bridge considered to be root by this node. See dot1dStpDesignatedRoot. |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.9 | esrBridgeStpRootCost | 0 | 0 | The cost of the path to the root from this node. See dot1dStpRootCost. |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.10 | esrBridgeStpRootPort | 0 | 0 | The port number with the lowest cost path to the root bridge. See dot1dStpRootPort. |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.11 | esrBridgeStpMaxAge | 0 | 0 | The maximum age used by this bridge to hold onto STP information before discarding. See dot1dStpMaxAge. |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.12 | esrBridgeStpHelloTime | 0 | 0 | The amount of time between configuration BPDUs. See dot1dStpHelloTime. |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.13 | esrBridgeStpHoldTime | 0 | 0 | The time value that indicates the interval during which no more than two configuration BPDUs will be sent by this node. See dot… |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.14 | esrBridgeStpForwardDelay | 0 | 0 | The amount of time that this node stays in each of the Listening and Learning states. See dot1dStpForwardDelay. |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.15 | esrBridgeStpBridgeMaxAge | 0 | 0 | The value of MaxAge when this bridge is the root. See dot1dStpBridgeMaxAge. |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.16 | esrBridgeStpBridgeHelloTime | 0 | 0 | The value of HelloTime to use when this bridge is the root. See dot1dStpBridgeHelloTime. |
| 1.3.6.1.4.1.1012.81.1.5.1.2.1.1.17 | esrBridgeStpBridgeForwardDelay | 0 | 0 | The value of FowardDelay to use when this bridge is the root. See dot1dStpBridgeForwardDelay. |