enum values per octet: 1=Flash, 2=TFTP, 3=PCMCIA,
4=LAN, 0=none
Default value on nX: (Flash)
On nX: in flash
This field has one octet for each boot source from which
the nX product will attempt to boot. The first choice
boot source is designated by the first byte, the second
choice by the second byte, etc. In the first release
there are only two boot choices, but future versions
may have additional choices such as PCMCIA. If the nX
detects that a boot choice is corrupted, it will ignore
that choice and proceed to the next choice. The value
'none' is just used to fill any unused octets after the
choices have been specified.
Parsed from file sbe_mib.mib.txt
Company: None
Module: SBE-MIB
enum values per octet: 1=Flash, 2=TFTP, 3=PCMCIA,
4=LAN, 0=none
Default value on nX: (Flash)
On nX: in flash
This field has one octet for each boot source from which
the nX product will attempt to boot. The first choice
boot source is designated by the first byte, the second
choice by the second byte, etc. In the first release
there are only two boot choices, but future versions
may have additional choices such as PCMCIA. If the nX
detects that a boot choice is corrupted, it will ignore
that choice and proceed to the next choice. The value
'none' is just used to fill any unused octets after the
choices have been specified.
Parsed from file SBE-MIB.mib
Module: SBE-MIB
Vendor: SBE, Inc.
Module: SBE-MIB
[Automatically extracted from oidview.com]
syBootOrder OBJECT-TYPE SYNTAX OCTET STRING ( SIZE ( 4 ) ) %{ return SNMP_SBEMIB_ControlGroup(snmpi); %} ACCESS read-write STATUS mandatory DESCRIPTION "enum values per octet: 1=Flash, 2=TFTP, 3=PCMCIA, 4=LAN, 0=none Default value on nX: (Flash) On nX: in flash This field has one octet for each boot source from which the nX product will attempt to boot. The first choice boot source is designated by the first byte, the second choice by the second byte, etc. In the first release there are only two boot choices, but future versions may have additional choices such as PCMCIA. If the nX detects that a boot choice is corrupted, it will ignore that choice and proceed to the next choice. The value 'none' is just used to fill any unused octets after the choices have been specified." ::= { routsys 1 }
syBootOrder OBJECT-TYPE SYNTAX OCTET STRING ( SIZE ( 4 ) ) ACCESS read-write STATUS mandatory DESCRIPTION "enum values per octet: 1=Flash, 2=TFTP, 3=PCMCIA, 4=LAN, 0=none Default value on nX: (Flash) On nX: in flash This field has one octet for each boot source from which the nX product will attempt to boot. The first choice boot source is designated by the first byte, the second choice by the second byte, etc. In the first release there are only two boot choices, but future versions may have additional choices such as PCMCIA. If the nX detects that a boot choice is corrupted, it will ignore that choice and proceed to the next choice. The value 'none' is just used to fill any unused octets after the choices have been specified." ::= { routsys 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1055.2.1.1.0 | syBootOrder | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1055.2.1.2 | syMtuMru | 1 | 1 | Default value on nX: 1500 On nX: both ram and flash, field trial 2 This field specifies the maximum size frame that the nX product… |
1.3.6.1.4.1.1055.2.1.3 | syEventToLogThreshold | 1 | 1 | Default value on nX: 3 On nX: both ram and flash, field trial 2 All events generated by the nX product have an associated severity… |
1.3.6.1.4.1.1055.2.1.5 | syEventToTrapThreshold | 1 | 1 | Default value on nX: 6 On nX: both ram and flash, field trial 2 All events generated by the nX product have an associated severity… |
1.3.6.1.4.1.1055.2.1.7 | syControlOperation | 1 | 1 | Default value on nX: 'none' On nX: in ram, field trial 1 except for Clear-SNMP-statistics and Disable-port-after-call which are fi… |
1.3.6.1.4.1.1055.2.1.8 | syControlVariableStringOne | 1 | 1 | Default Value on nX: N/A On nX: in ram, field trial 1 This object is used to store a DisplayString parameter to a control operatio… |
1.3.6.1.4.1.1055.2.1.9 | syControlVariableIntegerOne | 1 | 1 | Default Value on nX: N/A On nX: in ram, field trial 1 This object is used to store an Integer parameter to a control operation. O… |
1.3.6.1.4.1.1055.2.1.10 | syDialinAuthentication | 1 | 1 | Default value on nX: 'none' On nX: both ram and flash. This field identifies the type of authentication negotiation that is to be … |
1.3.6.1.4.1.1055.2.1.11 | syEventToSpeakThreshold | 1 | 1 | Default value on nX: 6 On nX: both ram and flash, field trial 2 All events generated by the nX product have an associated severity… |
1.3.6.1.4.1.1055.2.1.12 | syNumberOfTimesToSpeak | 1 | 1 | syNumberOftimesToSpeak |
1.3.6.1.4.1.1055.2.1.13 | sySaveRamToFlashState | 1 | 1 | This item specifies the state of the operation ram-to-Flash in the item syControlOperation. The valid states are: updating and id… |
1.3.6.1.4.1.1055.2.1.14 | syDialbackRetryInterval | 1 | 1 | This item specifies the number of seconds to pause before the next dialback call from Soho will be made. Default = 10 |
1.3.6.1.4.1.1055.2.1.15 | syDialbackRetryLimit | 1 | 1 | This item specifies the number of times that Soho will retry dialback call from Soho. Default is 3. |
1.3.6.1.4.1.1055.2.1.16 | syReverseCallbackTimeout | 1 | 1 | Default value on nX: 60 (seconds) Specifies the number of seconds to wait for an expected reverse callback before redialing. |